Guys I am having a problem with my HP 1 TB hard drive. When I plug it in my phone using otg there is a notification saying that "your hp hard drive is corrupt, tap to fix " which takes me to a format manu.
Of all the file managers available , only es file explorer is able to read the contents but writing operations are not allowed.
The otg cable is fine because I can use all my USB drives without any problems
The HDD itself is not corrupt as I can read/write on it using my PC/laptop
Note: when I first bought the HDD it was working normally on my phone ( it was blank back then) but then I had to format it to FAT32 for it to work with my PlayStation 3, after then I again formatted it to NTFS and transferred around 200 GB of movie and series in it and here I am.
Any help is appreciated
Android does not support NTFS natively.
uicnren said:
Android does not support NTFS natively.
Click to expand...
Click to collapse
Like I said when I first bought it was working fine ( I didn't check if it was NTFS but it must be because hdd's normally come as NTFS )
Sent from my Nexus 6P using XDA Labs
I had the same issue w/SanDisk 128 dual USB. Download 2Tware's Fat32Format (CNET has it) or a similar, third-party app and format the drive in FAT32. Hopefully, that'll fix your issue as it did mine.
Related
hi...
as the title...
who all are succeded in connecting usb external hdd to iconia ?
cause i tried with two, and booth are not recognized
one is pendrive sense 320gb, second is wd 250gb
all you who can connect, whats your hdd??
fyi, i can connect card reader and usb thumb drive
UPDATE
OKEY..
so i tried connecting my hdd through a powered usb hub, and still no luck,
i tried connect it with a Y cable, one to iconia and onte to powered hub, also no luck ...
is there any other way to try ? tried every thing from usb mount all, ntfs mount, charging while plugging , usb powered, new HDD, fat32 formatted , ntfs HDD and all in vain...
if not then, i am sure my device is defective of something....
How were they formatted? At those sizes, I'm going to guess they were formatted to NTFS which Android cannot read natively. There is, however, a thread in the Development section which includes a driver to enable NTFS support on the A500.
FloatingFatMan said:
How were they formatted? At those sizes, I'm going to guess they were formatted to NTFS which Android cannot read natively. There is, however, a thread in the Development section which includes a driver to enable NTFS support on the A500.
Click to expand...
Click to collapse
the first one have fat32 and nts partition, but the second one have 250gb full of fat32
i have installed ntfs mount and usb mount all, they just are not detected at all..
I just got my tab today, rooted and installed ntfs mount. No problems getting into my 500gig external hdd, formatted in ntfs.
Sent from my A500 using Tapatalk
I tried both 320gb Seagate and 750gb passport worked fine...They both formatted in fat32.
HM.. IT SEEMS , ONLY I CANT Get my hdd TO WORK IN ICONIA...
wonder why
is anyone here in asia or may be in indonesia??
may be this is rom related ?
l live in china ,very far from you .....
i still wait for the 3.1 update.
i am not sure can i receive ota update if i root it.
so i dont root ,and still wait.
well ,if i get the update of 3.1 ,i will come back and reply .
i have a 2T hdd, buffalo.
Okey... So now i have tried at least 6 different hdd and all failed...
I start to think ut is my hardware or rom problem?
Any solution ?
When i first connected a hdd i also thought it didn't work. When i looked at mnt/usb_storage.........no filelist. But when i got a cup of coffee and looked again the filelist was there. Apparantly the Acer needs a time to scan the HDD which can be long when it is large. So l'lle patience.
Sent from my A500 using Tapatalk
urbie47 said:
When i first connected a hdd i also thought it didn't work. When i looked at mnt/usb_storage.........no filelist. But when i got a cup of coffee and looked again the filelist was there. Apparantly the Acer needs a time to scan the HDD which can be long when it is large. So l'lle patience.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
how long actually ??
becauuse if this problem persist, i think i will take my device to the service centre,
btw, do they will know that i am rooted ?
last update : i have connected my hdd to iconia for about an hour without any luck,.
come on, do some one here can make a solution for me please ??
i can connect flash drive and card reader but not hdd, tried 6 different of them
even i asked in local acer forum in my country, everyone dont have problem...
so, what you think my problem here?
do i must do factory reset ?
interqd said:
HM.. IT SEEMS , ONLY I CANT Get my hdd TO WORK IN ICONIA...
wonder why
is anyone here in asia or may be in indonesia??
may be this is rom related ?
Click to expand...
Click to collapse
Are you sure you have power (external) going into your HD? I tried a WD portable and it wouldn't be read by the A500 until I connected it to an external power supply. Then I could read it without any problems.
iCurmudgeon said:
Are you sure you have power (external) going into your HD? I tried a WD portable and it wouldn't be read by the A500 until I connected it to an external power supply. Then I could read it without any problems.
Click to expand...
Click to collapse
how to connect it with external power supply ?
my hdd has only 1 usb slot, not 2 ..
Guy's....just download (HP USB Disk Storage Format Tool) to format your HD's to fat32. I did my 250 & 500GB HD and it work just find. Windows just don't format right...that's why I don't use windows to format my HD's. If you have Linux use Gparted.
I have
http://forum.xda-developers.com/showpost.php?p=14129262&postcount=8
I also have a 250gb that I can't get to read but then it needs dual-powered cable to be read on my laptop so I expected that. But my 320gb Buffalo, my 32gb Patriot and my 80gb Maxtor read just fine. All are NTFS. I have a 160gb from work that I will try tomorrow.
Connect it to windows and pull up the disk administrator (where you create partitions) and see if the disk is basic or dynamic? Just a hunch... have you tried different cables? And finally I want to be sure you are plugging it into the full sized USB pert and not the micro USB.
Sent from my A500 using Tapatalk
Euclid's Brother said:
Connect it to windows and pull up the disk administrator (where you create partitions) and see if the disk is basic or dynamic? Just a hunch... have you tried different cables? And finally I want to be sure you are plugging it into the full sized USB pert and not the micro USB.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
i am using mac, not windows, my hdd connect fine to mac, how to do this on mac?
not only different cables, yesterday i went to an it mall, there i tried almost 5 different 500gb hdd 2.5 inch, all failed, all have fat32 format, cause i checked them on my mac beforehand
yeah, of course i connect it to the usb 2.0 port..
this is what i dont understand, everyones hdd work fine in the iconia, why my iconia just cant read?
mine don't work either. I have a 1 TB western digital hard drive.
i use ntfs mount,first time install that ntfs mount apk...cant read my hdd but aftter reboot my iconia all partition on hdd can read and walk normal like on my laptop
I'm in Jakarta, so I don't think it can be a rom thing. Are you using NTFS mount, or just trying to plug the HDD into your tab and use the built-in software? Try this and it should fix the problem.
Good Morning
I am having a panic, i am going on holiday soon and i take lots of photos. I have just got the N7 and i have managed to put photos onto the N7 via an OTG cable + card reader with SD card inserted and using Nexus Media Importer. Now i can see them and select them in the gallery but when i plug in my Ext Hdd then N7 recognises it but i can transfer the photos over.
What am i doing wrong
Tansk in advance
Slaine
Be rooted and install StickMount.
Sent from my Nexus 7 using Tapatalk HD
slainesco said:
What am i doing wrong
Click to expand...
Click to collapse
You failed to appreciate the significance of the word "Importer" in the app's name.
bftb0 said:
You failed to appreciate the significance of the word "Importer" in the app's name.
Click to expand...
Click to collapse
is there a good exporter app then
when i attached my fat32 1tb hdd i use stickmount and it says MBR signature not found
any ideas
slainesco said:
is there a good exporter app then
when i attached my fat32 1tb hdd i use stickmount and it says MBR signature not found
any ideas
Click to expand...
Click to collapse
You've barely said anything meaningful about your device - for instance if it is rooted (& what ROM and kernel you are using if so).
Your mileage will depend on both the kernel and ROM you have installed. I would think that most kernels should support FAT32, but the ROM used (e.g. stock) may not have an automounter/vold which will automatically mount the device as soon as it is plugged in.
For example, this is why people will use StickMount on lightly-rooted stock, but don't need it at all with CM10.1 - the stock kernel supports mounting of FAT HDDs, but the stock ROM doesn't take any actions automatically when they are plugged in.
Right now I'm running a recent CM10.1 nightly & just plugged into my N7:
1) a 8 GB FAT32 uSD card on a reader
2) a 150 GB HDD formatted in NTFS
In both cases, the USB device mounted (without any intervention on my part) successfully - but with the NTFS HDD in read-only mode. I would think it would have mounted the HDD in R/W mode had it been a FAT filesystem. Dismounting the devices was available via Settings->Storage.
Once you've got the device mounted, any root-aware file browser app should allow you (in principle) the ability to copy files bi-directionally. The "in principle" part is that I see reports on here complaining about successful mounts but no files showing up... so you are probably going to need to experiment.
good luck
PS I believe that SD cards in card readers can be written by Media Importer - why this doesn't extend to FAT HDDs I don't really know.
bftb0 said:
You've barely said anything meaningful about your device - for instance if it is rooted (& what ROM and kernel you are using if so).
Your mileage will depend on both the kernel and ROM you have installed. I would think that most kernels should support FAT32, but the ROM used (e.g. stock) may not have an automounter/vold which will automatically mount the device as soon as it is plugged in.
For example, this is why people will use StickMount on lightly-rooted stock, but don't need it at all with CM10.1 - the stock kernel supports mounting of FAT HDDs, but the stock ROM doesn't take any actions automatically when they are plugged in.
Right now I'm running a recent CM10.1 nightly & just plugged into my N7:
1) a 8 GB FAT32 uSD card on a reader
2) a 150 GB HDD formatted in NTFS
In both cases, the USB device mounted (without any intervention on my part) successfully - but with the NTFS HDD in read-only mode. I would think it would have mounted the HDD in R/W mode had it been a FAT filesystem. Dismounting the devices was available via Settings->Storage.
Once you've got the device mounted, any root-aware file browser app should allow you (in principle) the ability to copy files bi-directionally. The "in principle" part is that I see reports on here complaining about successful mounts but no files showing up... so you are probably going to need to experiment.
good luck
PS I believe that SD cards in card readers can be written by Media Importer - why this doesn't extend to FAT HDDs I don't really know.
Click to expand...
Click to collapse
Sorry for the lack off info. I have only had the N7 for over a week and it isnt rooted as up until one hour ago i hadnt a clue what that meant. So i guess it is stock and ive sinced realised Stickmount wont work.
I can mount a 32gb stick no hassles but the fat32 1tb external hdd with power supply just comes up with mbr signature not found
thanks
Hello all.
I have a quick question about using an external hard drive with my nexus 10. I bought a Fantom Drives desktop style external (with power adapter) to use with my macbook air, my girlfriends win7 laptop, and my nexus 10. I prepped the tablet by rooting it and installing StickMount because I read that was the only way to write to usb storage.
When I plug up the external with my usbOTG cable, it recognizes it and it shows up in Androzip, but none of the files that I put on it from windows show up, and also it will not let me write to it from the tablet either. When I try to write to it (a very small photo), it says "Could not move folder due to system restrictions". I have tried reading and writing to the drive from the tablet with it formatted in NTFS and also with it formatted in exFAT.
Am I just out of luck and the drive will not work with my nexus, or are there any other troubleshooting options I can try? Any help is greatly appreciated. Thanks in advance!
jonmike13 said:
Hello all.
I have a quick question about using an external hard drive with my nexus 10. I bought a Fantom Drives desktop style external (with power adapter) to use with my macbook air, my girlfriends win7 laptop, and my nexus 10. I prepped the tablet by rooting it and installing StickMount because I read that was the only way to write to usb storage.
When I plug up the external with my usbOTG cable, it recognizes it and it shows up in Androzip, but none of the files that I put on it from windows show up, and also it will not let me write to it from the tablet either. When I try to write to it (a very small photo), it says "Could not move folder due to system restrictions". I have tried reading and writing to the drive from the tablet with it formatted in NTFS and also with it formatted in exFAT.
Am I just out of luck and the drive will not work with my nexus, or are there any other troubleshooting options I can try? Any help is greatly appreciated. Thanks in advance!
Click to expand...
Click to collapse
Try converting the drive to fat32. It should read and write well then!
c1oud said:
Try converting the drive to fat32. It should read and write well then!
Click to expand...
Click to collapse
Unfortunately wont FAT32 cap at 4gb? Also, forgive my ignorance but what can I do to format it in FAT32 because my only format options in windows were exFAT and NTFS.
Thanks for the reply!
jonmike13 said:
Unfortunately wont FAT32 cap at 4gb? Also, forgive my ignorance but what can I do to format it in FAT32 because my only format options in windows were exFAT and NTFS.
Thanks for the reply!
Click to expand...
Click to collapse
got it to work!! used the Verbatim fat32 format tool. It recognizes all 2 terabytes of space and reads and writes on the nexus 10. Thanks so much for the help!! Very pleased to be able to use my new external with the tablet. Now I just have to play the waiting game for my new Macbook Air to show up
jonmike13 said:
got it to work!! used the Verbatim fat32 format tool. It recognizes all 2 terabytes of space and reads and writes on the nexus 10. Thanks so much for the help!! Very pleased to be able to use my new external with the tablet. Now I just have to play the waiting game for my new Macbook Air to show up
Click to expand...
Click to collapse
Nothing at all! The downside of fat32 is that indeed there is a limit for the size of an individual file. You can't write files bigger than 4gb. Also if you try a custom kernel with ntfs support you will be able to read from ntfs but not surely write..!
c1oud said:
Nothing at all! The downside of fat32 is that indeed there is a limit for the size of an individual file. You can't write files bigger than 4gb. Also if you try a custom kernel with ntfs support you will be able to read from ntfs but not surely write..!
Click to expand...
Click to collapse
You can sometimes do NTFS-write. It's not unheard of. The downsides of FAT32 are also a lot worse than what you described: it's significantly more prone to corruption and doesn't handle unexpected ejections nearly as well because it's not journalled, and has no support at all for permissions. But for performance and convenience reasons, it really can't be beat at the moment.
Rirere said:
You can sometimes do NTFS-write. It's not unheard of. The downsides of FAT32 are also a lot worse than what you described: it's significantly more prone to corruption and doesn't handle unexpected ejections nearly as well because it's not journalled, and has no support at all for permissions. But for performance and convenience reasons, it really can't be beat at the moment.
Click to expand...
Click to collapse
I can write and read with my note 2. However i tried with stock kernel ntfs and nothing happens. I think that in terms of speed ntfs is also faster.
c1oud said:
I can write and read with my note 2. However i tried with stock kernel ntfs and nothing happens. I think that in terms of speed ntfs is also faster.
Click to expand...
Click to collapse
Should have clarified. It's a kernel support thing.
hi guys
i have note 3 (9005) and i make update to kitkat so now it cant read USB flash disk.
my question is how can i make note 3 (9005) read USB flash disk? can any one help me in this problem?
Kitkat can still read flash drives. What did you do ash? You catch'em all with your pokeballs? Lol
What format is your flash drive? NTFS or FAT32?
Sent from my SM-N9005 using XDA Free mobile app
Graffiti Exploit said:
Kitkat can still read flash drives. What did you do ash? You catch'em all with your pokeballs? Lol
What format is your flash drive? NTFS or FAT32?
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
I didn't do anything ..!
My flash drive is ntfs and when i conect it to my phone it appears it connected then there is massage "usb removed safely"
ash210 said:
I didn't do anything ..!
My flash drive is ntfs and when i conect it to my phone it appears it connected then there is massage "usb removed safely"
Click to expand...
Click to collapse
NTFS is not supported. Please reformat it to FAT32.
NTFS can be supported through a mod though.
Android itself has never supported NTFS drives. Only Asus Tranformer devices support NTFS via third party drivers (Because of the USB port.)
Fat32 and exFAT are supported though.
FAT32 only supports files up to a maximum of 4GB. Useless for Semi-HD and Full-HD films.
exFAT supports files up to 16EB (ExaByte) (max file size in exFAT is redundant, since there aren't any drives commercially available over 5TB. Even the collective size of the entire internet is only 5EB.)
My advice, use exFAT.
I think ROM Toolbox comes with driver called Paragon NTFS, that should work with OTG USB NTFS storage, but you need to be rooted. I think this is the only alternate option to reformatting all your external storage to exfat, which may not be practical. Or do it Apple way, transfer data between 2 devices sitting next to each other, half across the globe and back using itunes, I mean cloud, like dropbox.
Thanks guys sooooo much
. ☺
But how can i make my phone read ntfs?
I know it only supports FAT32, but until i lost my adapter that came with my Samsung 10 it used to read the ntfs flash no problem, but now says unsupported file structure. I was also using a different flash that was lost with the adapter. I bought the same adapter on ebay but using a different flash. Could that be the problem? Im not rooted, but that didnt matter before. Want to be able to transfer movies over 4GB like i have until this week. Thanks
Yankee6 said:
I know it only supports FAT32, but until i lost my adapter that came with my Samsung 10 it used to read the ntfs flash no problem, but now says unsupported file structure. I was also using a different flash that was lost with the adapter. I bought the same adapter on ebay but using a different flash. Could that be the problem? Im not rooted, but that didnt matter before. Want to be able to transfer movies over 4GB like i have until this week. Thanks
Click to expand...
Click to collapse
NTFS is designed for the Microsoft Windows operating systems, not on some Android devices.
You can try to format as exFAT or FAT32. exFAT is same as NTFS.
You can transfer your movies using MTP.
AmznUser444 Dev said:
NTFS is designed for the Microsoft Windows operating systems, not on some Android devices.
You can try to format as exFAT or FAT32. exFAT is same as NTFS.
You can transfer your movies using MTP.
Click to expand...
Click to collapse
Exfat didnt work either same error as with NTFS.
Yankee6 said:
Exfat didnt work either same error as with NTFS.
Click to expand...
Click to collapse
Because Amazon doesn't pay to Microsoft to use NTFS and ExFAT.
You can transfer your media from your PC to Fire tablet using USB.
AmznUser444 Dev said:
Because Amazon doesn't pay to Microsoft to use NTFS and ExFAT.
You can transfer your media from your PC to Fire tablet using USB.
Click to expand...
Click to collapse
but it DID work before. I guess no one can explain how this was possible then and not now. I keep the tablet at work and bring flash drives to transfer movies. Wanted to be able to transfer movies over 4 gig, but guess ive lost the ability to do that now.
You could try exFAT/NTFS for USB by Paragon. Maybe that can read the drive