Related
I Have a big issue and need your help
I was OOS3 and do all the correct steps to get modified TWRP to setup custom rom and succeeded on this they I decide to back agaon to OOS3 as it`s more sable
So I download OOS3 and flash it from my Modified Recovery and works fine
Than I decide to enter the recovery just to clear the cash for agood performance and here .. the issue started ...
when I click reboot to recovery , the mobile stopped @ 1+ LOGO So I remmember that this modified recovery is not working with oos3
so I get the steps for unloacking the boatloader again to flash the recovery compatible with OOS3
and HERE .. I see my device when I type
fastboot devices ,,,
but once I type "fastboot oem unlock" it`s show my ok and device rebooted in the same 1+ LOGO
SO I now Stuck in this logo
Cannot enter the recovery Or even the OOS3 just can enter the fastboat mode
Please I need your help how can I manage this
I think your thread will get moved to the General section. But in the meantime try this it worked for me
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Sent from my ONE A2005 using XDA-Developers mobile app
Use the search button before posting.. There atleast 4 threads with the solution.
Wrong section
the command you're looking for is not the unlock one but this one: fastboot flash recovery "twrp-2.8.x.x-xxx.img" just replace "twrp-2.8.x.x-xxx.img" with the name of the recovery .img you have in the same folder as fastboot.
Ahmed Shawky said:
I Have a big issue and need your help
I was OOS3 and do all the correct steps to get modified TWRP to setup custom rom and succeeded on this they I decide to back agaon to OOS3 as it`s more sable
So I download OOS3 and flash it from my Modified Recovery and works fine
Than I decide to enter the recovery just to clear the cash for agood performance and here .. the issue started ...
when I click reboot to recovery , the mobile stopped @ 1+ LOGO So I remmember that this modified recovery is not working with oos3
so I get the steps for unloacking the boatloader again to flash the recovery compatible with OOS3
and HERE .. I see my device when I type
fastboot devices ,,,
but once I type "fastboot oem unlock" it`s show my ok and device rebooted in the same 1+ LOGO
SO I now Stuck in this logo
Cannot enter the recovery Or even the OOS3 just can enter the fastboat mode
Please I need your help how can I manage this
Click to expand...
Click to collapse
First read the Forum Rules on posting, moved here out of the Development Section....
fastfreddy101 said:
the command you're looking for is not the unlock one but this one: fastboot flash recovery "twrp-2.8.x.x-xxx.img" just replace "twrp-2.8.x.x-xxx.img" with the name of the recovery .img you have in the same folder as fastboot.
Click to expand...
Click to collapse
How Can I do this and I even can not unlock the boatloader ?
should still be unlocked - put phone in fastboot mode, check for it via: fastboot devices. If its there then just flash the recovery with: fastboot flash recovery "twrp-2.8.x.x-xxx.img" then reboot into recovery. should work
fastfreddy101 said:
should still be unlocked - put phone in fastboot mode, check for it via: fastboot devices. If its there then just flash the recovery with: fastboot flash recovery "twrp-2.8.x.x-xxx.img" then reboot into recovery. should work
Click to expand...
Click to collapse
I can`t unlock the phone
Thanks for your reply
My situation now that I`m stuck in boot loop and I can`t enter any think , only the fastboat mode and I can not unlock my device
every time I tried to Unlock it , till me Fail to unlock
I follow this steps with no change
http://www.technobuzz.net/unbrick-oneplus-2/
In this video also with no hope
https://www.youtube.com/watch?v=R4SVSovw4Jo
Ahmed Shawky said:
Thanks for your reply
My situation now that I`m stuck in boot loop and I can`t enter any think , only the fastboat mode and I can not unlock my device
every time I tried to Unlock it , till me Fail to unlock
I follow this steps with no change
http://www.technobuzz.net/unbrick-oneplus-2/
In this video also with no hope
https://www.youtube.com/watch?v=R4SVSovw4Jo
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/oneplus-2/general/firstaid-zip-revert-h2os-mm-beta-to-lp-t3306967 to get back your old twrp and then follow the instructions from here https://forums.oneplus.net/threads/installation-instructions-faqs-oxygenos-3-0-0.439108/ carefully (use the tread for users already have twrp)
When did you lock the phone again after unlocking it?
Assuming the phone shows up when running "fastboot devices" try running this "fastboot -i 0x2a70 oem unlock-go" - worked for me
Dear Xda members, I need help with my OnePlus 2... Just got it few days ago. Great phone ! and as an android user, generally the first thing I'd do with my phone was to root it...
basically here's what I've done...
1. unlocked bootloader
2. flash TWRP
3. clean flash OOS 3.0 Beta from TWRP
4. flash CM 13 by Grarak from TWRP
5. flash Gapps Arm64-6.0-micro from TWRP
6. flash SU from TWRP
things were going fine, everything works normally, until I go into bootloader mode.
Suddenly my device goes into a boot loop...
I realised maybe there were something wrong with my recovery (TWRP).
so I tried to flash it again, but it says that my device were locked, therfore I can't flash img file from my PC...
I tried to type unlock Oem, but when I check oem device info, it says device tampered : true, unlock device : false.
I searched for a while and find a temporary solution, by typing "fastboot continue" from command prompt in PC,
I was able to skip the boot loop straight to the boot-animation and was able to enter Cyanogen.
but if I turn off and on my phone, again it enters boot loop...
so basically here's my phone condition...
1. stuck at boot loop
2. no recovery
3. locked bootloader
4. Cyanogen & Su working fine
Please anyone, help... and Thx...
I've used this guide to good success twice now, good luck let's hope you're up and running in no time.
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
WHOA !!! IT WORKED !!! Thx alot BRO !!! You saved my day !!! THX XDA !!!
Hello,
I need help about my yureka plus on android (YU5510A),
I bought yureka plus yesterday and it comes on stock android 4.4.4 (Kitkat), I try to install custom rom and connect my phone to my laptop with help of YUWARE and try to unlock the bootloader in fastboot mode, it shows the successful message, but phone cant restart, I restart it manually, but it stuck on Yureka logo, trying again for flashing TWRP, same thing happen.
My phone (YU5510A) stuck on yureka plus logo.
So please help me.
Best Regards
Sadique A
sadique2804 said:
Hello,
I need help about my yureka plus on android (YU5510A),
I bought yureka plus yesterday and it comes on stock android 4.4.4 (Kitkat), I try to install custom rom and connect my phone to my laptop with help of YUWARE and try to unlock the bootloader in fastboot mode, it shows the successful message, but phone cant restart, I restart it manually, but it stuck on Yureka logo, trying again for flashing TWRP, same thing happen.
My phone (YU5510A) stuck on yureka plus logo.
So please help me.
Best Regards
Sadique A
Click to expand...
Click to collapse
your device is soft bricked from where i see,
download the drives first for your device link :- https://androidmtk.com/download-yu-usb-driver
download adb platform tools:- https://dl.google.com/android/reposi...st-windows.zip
download recovery:- https://dl.twrp.me/tomato/
download the fast-boot firmware:- http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS8A4-tomato-signed-fastboot-a7a306cebd.zip
download factory image maker :- https://drive.google.com/open?id=0BxGRG9YXw62rUWNLMjdNaGt1a2s
method 1
extract the fast boot firmware and factory image maker in same folder. then follow these steps.
put your phone in fast-boot mode and type fastboot -i 0x1ebf oem unlock (will unlock your bootloader)
and now find flash_all.bat file in the folder where you extracted all files and run as admin. let the process finish you would be back at stock firmware with no boot loops.
if you don't want to go to factory image then
method 2
boot your phone in fastboot and type
fastboot -i 0x1ebf oem lock (to lock your bootloader)
fastboot -i 0x1ebf oem unlock (to unlock your boot loader) as you used yuware or something that might created problem in bootloader so follow both.
fastboot -i 0x1ebf flash recovery name_of_recovery.img
and let it flash recovery then boot into recovery go to advance wipe format data type yes and swipe, install any custom rom and flash gapps done.
if you face still boot loops follow method 1 and flash roms later.
P.s while in fast-boot remove sim cards and memory cards from your phone and then run any commands.
and while flashing any roms please do remove sim cards.
Bhavesh_khatri said:
your device is soft bricked from where i see,
download the drives first for your device link :- https://androidmtk.com/download-yu-usb-driver
download adb platform tools:- https://dl.google.com/android/reposi...st-windows.zip
download recovery:- https://dl.twrp.me/tomato/
download the fast-boot firmware:- http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS8A4-tomato-signed-fastboot-a7a306cebd.zip
download factory image maker :- https://drive.google.com/open?id=0BxGRG9YXw62rUWNLMjdNaGt1a2s
method 1
extract the fast boot firmware and factory image maker in same folder. then follow these steps.
put your phone in fast-boot mode and type fastboot -i 0x1ebf oem unlock (will unlock your bootloader)
and now find flash_all.bat file in the folder where you extracted all files and run as admin. let the process finish you would be back at stock firmware with no boot loops.
if you don't want to go to factory image then
method 2
boot your phone in fastboot and type
fastboot -i 0x1ebf oem lock (to lock your bootloader)
fastboot -i 0x1ebf oem unlock (to unlock your boot loader) as you used yuware or something that might created problem in bootloader so follow both.
fastboot -i 0x1ebf flash recovery name_of_recovery.img
and let it flash recovery then boot into recovery go to advance wipe format data type yes and swipe, install any custom rom and flash gapps done.
if you face still boot loops follow method 1 and flash roms later.
P.s while in fast-boot remove sim cards and memory cards from your phone and then run any commands.
and while flashing any roms please do remove sim cards.
Click to expand...
Click to collapse
Need custom recovery
TWRP 3.0.2 not supported by YU5510A
sadique2804 said:
Need custom recovery
TWRP 3.0.2 not supported by YU5510A
Click to expand...
Click to collapse
TWRP is custom recovery itself, using it on my device since year, works fine you might have flashed wrong twrp. Try rom the link provided and remove every thing from phone before flashing twrp.
Bhavesh_khatri said:
TWRP is custom recovery itself, using it on my device since year, works fine you might have flashed wrong twrp. Try rom the link provided and remove every thing from phone before flashing twrp.
Click to expand...
Click to collapse
I know TWRP is custom recovery
But in my phone (YU5510A, Stock Android 4.4.4) it is not supported.
Whenever I am trying to install, it corrupt the recovery and the firmware of my phone.
After installing TWRP 3.0.2.0 (downloaded from official website under tomato section) my phone cant boot, it stuck on YU logo.
If you have the link please share.
sadique2804 said:
I know TWRP is custom recovery
But in my phone (YU5510A, Stock Android 4.4.4) it is not supported.
Whenever I am trying to install, it corrupt the recovery and the firmware of my phone.
After installing TWRP 3.0.2.0 (downloaded from official website under tomato section) my phone cant boot, it stuck on YU logo.
If you have the link please share.
Click to expand...
Click to collapse
Like i said your device is soft bricked try methods i suggested, but recovery should work fine press vol up+ vol down+power button to boot into recovery you would be able to use TWRP. if not try to flash recovery again as i said yuware might have introduced some bugs install as i suggested. your device stuck at boot loop has nothing to do with recovery not working.
---------- Post added at 08:03 PM ---------- Previous post was at 07:50 PM ----------
Try to flash older versions here is 2.8.4.0 if you on kit-kat or any,
https://dl.twrp.me/tomato/twrp-2.8.4.0-tomato.img
https://dl.twrp.me/tomato/twrp-2.8.5.0-tomato.img
https://dl.twrp.me/tomato/twrp-2.8.6.0-tomato.img
type
fastboot -i 0x1ebf flash recovery twrp-2.8.4.0-tomato.img
remove simcards and memory cards while flashing. hope this helps.
I flashed cm12.1 officially signed, and it worked and i recovered my device, but i want to flashed custom rom and it needs a custom recovery.
That's the problem, and I tried 2.8.7 and 2.8.6 and 2.8.5.
Currently I am on official cm12.1 with cm recovery.
I m also facing same problem.
---------- Post added at 08:26 PM ---------- Previous post was at 08:26 PM ----------
sadique2804 said:
I flashed cm12.1 officially signed, and it worked and i recovered my device, but i want to flashed custom rom and it needs a custom recovery.
That's the problem, and I tried 2.8.7 and 2.8.6 and 2.8.5.
Currently I am on official cm12.1 with cm recovery.
Click to expand...
Click to collapse
Your problem solved bro?
sadique2804 said:
I know TWRP is custom recovery
But in my phone (YU5510A, Stock Android 4.4.4) it is not supported.
Whenever I am trying to install, it corrupt the recovery and the firmware of my phone.
After installing TWRP 3.0.2.0 (downloaded from official website under tomato section) my phone cant boot, it stuck on YU logo.
If you have the link please share.
Click to expand...
Click to collapse
TRY TO UNLOCK BOOTLOADER FIRST.
Twrp won't install properly if the bootloader is locked.
IF THIS HELPS CLICK THANKS :good:
Hangs twrp
My phone got hanged at twrp yureka plus yu5510A stock lollipop plz help
ray pember said:
My phone got hanged at twrp yureka plus yu5510A stock lollipop plz help
Click to expand...
Click to collapse
Flash latest version of twrp using adb
Here is the link
https://dl.twrp.me/tomato/twrp-3.1.1-0-tomato.img.html
My device 5510a I install twrp but touch not working properly so plz help me....next what I do
sadique2804 said:
Hello,
I need help about my yureka plus on android (YU5510A),
I bought yureka plus yesterday and it comes on stock android 4.4.4 (Kitkat), I try to install custom rom and connect my phone to my laptop with help of YUWARE and try to unlock the bootloader in fastboot mode, it shows the successful message, but phone cant restart, I restart it manually, but it stuck on Yureka logo, trying again for flashing TWRP, same thing happen.
My phone (YU5510A) stuck on yureka plus logo.
So please help me.
Best Regards
Sadique A
Click to expand...
Click to collapse
hello for yureka i have some files I hope u don't try fastboot cause yureka have limited rom memory i have some files i encountered the worst case . i went to local vendor he did it for 3dollar. nd yes i read some yureka have a different board in the differnet country so files are bit messed up feel free to message i have somefiles try the luck or better search other thread developers are not doing a lot nowadays i was trying ubuntu but somehow sad life
Hii I have yu yureka plus (yu5510a) the phone is starting and stuck at YU logo after that blue screen appears and phone can't go ahead .
And When i connect the phone with pc it can't detected and an error shows in phone that "do not disconnect the data cable" & in bottom left "your phone is not secure" please help
FIXED, Just type this adb command when you are in recovery mode....
Code:
adb shell dd if=/dev/zero of=/dev/block/platform/soc/7824900.sdhci/by-name/misc
Click to expand...
Click to collapse
Hi guys, i have an issue....
Moto g5 plus XT1680 LATAM
I flashed with Flash Fire (security patch) in my moto g5 plus rooted with SuperSU systemless and BL unlocked, but i reboot phone and it starts on recovery TWRP, then, i tried for 3 times but keeps starting on recovery mode.
After that, i tried to power up phone on booloader and then select START And it works, it's the only way that i can start phone normally, or wait for recovery starts and select reboot in bootloader mode because if i select reboot system ... keeps starting on recovery mode.
So, if i dont use bootloader and Select START, phone into recovery mode.
PLEASE, help me i tried with fastboot cmd [fastboot oem fb_mode_clear] not works, wipe /cache doesn't work too, i dont want to flash stock firmware. Can i fix this with a cmd or flashing stock img like boot.img / bootloader.img or something?
Thanks guys. :good:
BunnyHoo said:
Hi guys, i have an issue....
Moto g5 plus XT1680 LATAM
I flashed with Flash Fire (security patch) in my moto g5 plus rooted with SuperSU systemless and BL unlocked, but i reboot phone and it starts on recovery TWRP, then, i tried for 3 times but keeps starting on recovery mode.
After that, i tried to power up phone on booloader and then select START And it works, it's the only way that i can start phone normally, or wait for recovery starts and select reboot in bootloader mode because if i select reboot system ... keeps starting on recovery mode.
So, if i dont use bootloader and Select START, phone into recovery mode.
PLEASE, help me i tried with fastboot cmd [fastboot oem fb_mode_clear] not works, wipe /cache doesn't work too, i dont want to flash stock firmware. Can i fix this with a cmd or flashing stock img like boot.img / bootloader.img or something?
Thanks guys. :good:
Click to expand...
Click to collapse
I have the same problem when i select factory mode on bootloader then the phone starts only...
Otherwise it boots into twrp recovery
I have the same problem. Only boots into system via bootloader.
Otherwise it boots into twrp recovery.
After successfully booting into system it told me "system update failed".
I guess its because the system update routine is to be flashed via stock recovery and therefore its booting into recovery until it is flashed? Just guessing, but if so could I just flash the update manually?
Thanks in Advance :good:
same here, ps. thanks for the tip of boatloader !!
bubo23 said:
same here, ps. thanks for the tip of boatloader !!
Click to expand...
Click to collapse
np, i still w8 for a solution!, i try some methods but not seems to work
Xt1687 here - same issue. Can I get confirmation that flashing the stock firmware fixes it?
Sorry if I'm wrong you cannot update when bootloader unlock ,have to wait some one make a fash zip so we can fash on twrp
Same here, I have to go to Mount then check System and then Reboot, Bootloader and finally Start. It's very annoying. I tried some ADB commands but nothing seemed to work.
Update: So I got annoyed enough by it to finally flash a different rom, wiped /data /system /cache and installed
Cosmic-OS 3.1 Universe but still can only boot via bootloader...
Any suggestions? Do I have to reformat the whole phone in bootloader via Computer?
Thanks in advance :good:
Finally found a fix, might not work for everyone though. Thanks to @aughtnaut:
https://forum.xda-developers.com/showpost.php?p=74109609&postcount=65
jcags said:
Finally found a fix, might not work for everyone though. Thanks to @aughtnaut:
https://forum.xda-developers.com/showpost.php?p=74109609&postcount=65
Click to expand...
Click to collapse
I'll try bro, thanks.:good:
jcags said:
Finally found a fix, might not work for everyone though. Thanks to @aughtnaut:
https://forum.xda-developers.com/showpost.php?p=74109609&postcount=65
Click to expand...
Click to collapse
IT WORKS!!!!, THANKS A LOT!.
Just TYPE FIRST CODE and see the magic!
It worked, thanks for the link!
Hello i have a probleme twrp in my moto g5 plus i unlock bootloader i install twrp but if i want to make a reboot into twrp didnt work . The one methode for reboot into twrp is reboot bootloader and press star , plz i need a solution for normal reboot
today , I unlocked the bootloader of my Real Me 2 Pro and everything was fine and after I tried to boot it back to system after flashing magisk and the decryption.zip , I got this message saying " The current boot / recovery image have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it"
I can just flash the official firmware or any ohter ROM but the PC can't seem to detect the fastboot mode and neither am I able to boot into fastboot / recovery.
can someone please help.!
vishnusai.karumuri said:
today , I unlocked the bootloader of my Real Me 2 Pro and everything was fine and after I tried to boot it back to system after flashing magisk and the decryption.zip , I got this message saying " The current boot / recovery image have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it"
I can just flash the official firmware or any ohter ROM but the PC can't seem to detect the fastboot mode and neither am I able to boot into fastboot / recovery.
can someone please help.!
Click to expand...
Click to collapse
Hi, how about your phone? is your problem have solved?
i have same problem like you. and i want to know about to solve it
thank you
hi, my problem a bit different with recovery.
i have stock recovery with unlocked bootloader. im with coloros 5.2 and can not install coloros 6 update. stock recovery cant find update file in phone storage, wifi doesnt work and starting update from os, returns update failed after one reboot. and suggestion?
vishnusai.karumuri said:
today , I unlocked the bootloader of my Real Me 2 Pro and everything was fine and after I tried to boot it back to system after flashing magisk and the decryption.zip , I got this message saying " The current boot / recovery image have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it"
I can just flash the official firmware or any ohter ROM but the PC can't seem to detect the fastboot mode and neither am I able to boot into fastboot / recovery.
can someone please help.!
Click to expand...
Click to collapse
I face the same issue. Flashed twrp. Then flashed boot+magisk+patched img file. Now the phone halts at the fastboot mode and is not booting up. It also unable to be power off. plz help. The model is Realme2 RMX 1805
Dont worry you do have a unlocked device so u need a pc to do that download system.img, vendor.img for your device and just open cmd then type this fastboot flash system system.img then fastboot flash vendor vendor.img and reboot it second method if you dont have an pc not sure that it will work you need a second device with otg support download bugjaeger app from playstore and use the same commands which i mention in pc method