Related
First want to say hi and that this site is full of knowledge so any help with my subject will be great.
Got a att s4 sgh-i337 phone. I rooted it before the lollipop ota update was out and everything went fine. Then the lollipop update came out and I followed one of the methods on keeping root and updating to 5.0.1 lollipop on the phone. Everything went fine with that. Still showed root status and never did the phone brick or have any issues in the updating.
At some point though, I did run triangle away because I would have the custom logo and opened padlock when the phone would boot up. I knew it wasn't a huge deal but the counter showed correct and never could just figure out how to get it to go away. Either way, I did run it and I think rebooting twice, the factory loading image came back to it. Now it shows my current status as 0 for the counter and the binary is Official.
I have not tried to load any roms or nothing like this to the phone, just followed the instructions to give it root access so I could run a few different apps and adaway for when I listen to Spotify.
One day, I was trying to install a new version of Words with Friends and it failed because I think wwf was open, but I did go back and install it. For some reason now, my phone never notifies my with a wwf notification when somebody plays me. Every now and then, it might pop up when I restart the phone but that is it. I don't think facebook notifies me everytime also but was more worried about words with friends.
Searching google, it says to go into recovery mode and flash the cache of the phone there. I have done the cache memory in the phone but that has not fixed my problem. When trying to go to recovery, it never works, it would always show, recovery booting and then load the phone up as normal.
I have download quick boot and rom manager since they all have an option to boot into recovery rather than pressing the buttons but it always does the same thing. Reading the web though, it seemed like I needed to install a different recovery than the factory I guess, so using rom manager, I tried twrp and that didn't work so I installed ClockworldMod 6.0.4.7. Rom manager shows that as the current recovery method.
When I try to boot into recovery, it still shows that recovery is booting and then goes straight to loading the phone as it should normally.
Now though, every time I restart my phone, it says recovery is trying to boot but never does.
How do I fix my phone to be able to boot into recovery and it not try to boot every time it powers on. I have tried searching google but I just just can find an answer to my direct problem. I know how to hold the buttons and go to recovery but does not work, and I also know how to get to it from the different app programs(rom manager and quick boot) but they do not work either. It would be nice to get the wwf notifications to work properly again also.
If you need any information from my phone, please ask. Thanks for any help on my matter,
Charlie
Odin stock and start over.
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
creepyncrawly said:
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
Click to expand...
Click to collapse
Thanks for the replies guys, I really don't know a whole lot about rooting other than following instructions about it. I was unaware you could not use the twrp or cwr as a recovery. My recovery did not work before so that is why I was trying to install those. I knew you could not install custom roms but I did not know that you could not use rom manager to install custom recoveries.
I appreciate the help so far and I will look into that thread you mentioned. I haven't read it but will this take me back to stock lollipop 5.0.1 and I just reinstall apps or will I have to re-root the phone.
Charlie
please delete, sorry
Charlie
You have to go back to 4.4.4, to the nb1 base, root with towelroot, and then use the keeproot method to get back to 5.0.1 rooted. The instructions are in the guide, and also a link to the keeproot thread is there.
By the way, for future reference, questions, help and troubleshooting issues should go in the Q&A forum, not the general forum.
not having any luck
Ok guys,
I am trying to follow the guide but not having much luck.
I downloaded the I337UCUFNB1_4.4_Stock_Odin_tar and put it in the AP Odin file. I'm not sure if I should be using it or the other file named I337UCUFNB1_4.4_Rootable_Stock_Odin_tar to begin with. The instructions said to use the first one so that is the one I was trying to use.
After putting the first file in the AP slot of Odin and hitting start, it begins to try to do it's thing and then says it fails!
What do I do now? Am I doing something wrong or what because I'm trying to follow instructions but not having much luck.
Please help. Sorry for posting in the wrong area also in the beginning.
Charlie
I'm screwed
Now when I turn my phone on, it says Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again?
doing better now
Pretty sure I got it going finally. I changed cords and then changed ports on my computer and it finally did go back to stock without an error. I'm currently back on Lollipop and rooted so now is the fun of reinstalling contact info and anything else. So far I have not rebooted but it was not showing the recovery booting option when it did reboot. Hoping my notifications work properly now also!
Thanks!!!
Charlie
Yesterday I bit the bullet, rooted and flashed my N9005 with CWM and Temasek's CM12.1 rom.. and wow, wished Id done this sooner..
Device is now so clean and slick, and I just need to hunt down and find the apps I want to put on. I did think I may lose some functionality, but I wasn't a heavy user of some of the Note's features, so wasn't too worried, and since I found Spen Command, the stylus is now better than before!
The process was very easy, and the guides I used were very good.. however, I seemed to have some screens that weren't referred to or documented, and although everything seems to be working.. I just had a few question...
After I used ODIN to install CWM Recovery, the phone booted, however, the guide implied the device should fully reboot to then copy SuperSU... but I was prompted with a recovery menu asking if I wanted to root the phone, so I said yes.. then rebooted to copy the SuperSU over, reboot into recovery and install the zip, rebooted and confirmed root.
Nothing I had read had mentioned about the first menu asking if I wanted to root, and I thought the rooting process was the installation of SuperSU?
I then flash the ROM and Gapps... few issues at first, but after applying the Rom OTA update, all is well! SuperSU is gone, but I assume that being a Custom Rom it is essentially already rooted so doesn't need it.
I installed CW Rom Manager but this actually told me the latest version of recovery was actually older than the one I had installed, and that my devices wasn't actually supported... Also, much of the content available through it seem out of date, so I removed it.
Think ill stick with this ROM anyway and await the Offical Note3 CM12.1.. although not really seeing much info about it, so don't even know if it will!
DocSoton said:
Yesterday I bit the bullet, rooted and flashed my N9005 with CWM and Temasek's CM12.1 rom.. and wow, wished Id done this sooner..
Device is now so clean and slick, and I just need to hunt down and find the apps I want to put on. I did think I may lose some functionality, but I wasn't a heavy user of some of the Note's features, so wasn't too worried, and since I found Spen Command, the stylus is now better than before!
The process was very easy, and the guides I used were very good.. however, I seemed to have some screens that weren't referred to or documented, and although everything seems to be working.. I just had a few question...
After I used ODIN to install CWM Recovery, the phone booted, however, the guide implied the device should fully reboot to then copy SuperSU... but I was prompted with a recovery menu asking if I wanted to root the phone, so I said yes.. then rebooted to copy the SuperSU over, reboot into recovery and install the zip, rebooted and confirmed root.
Nothing I had read had mentioned about the first menu asking if I wanted to root, and I thought the rooting process was the installation of SuperSU?
I then flash the ROM and Gapps... few issues at first, but after applying the Rom OTA update, all is well! SuperSU is gone, but I assume that being a Custom Rom it is essentially already rooted so doesn't need it.
I installed CW Rom Manager but this actually told me the latest version of recovery was actually older than the one I had installed, and that my devices wasn't actually supported... Also, much of the content available through it seem out of date, so I removed it.
Think ill stick with this ROM anyway and await the Offical Note3 CM12.1.. although not really seeing much info about it, so don't even know if it will!
Click to expand...
Click to collapse
Seriously dude. Go to temaseks thread and care to read at least first two posts. Please do it for all roms. Because if you did you would know that :
TWRP is RECOMMENDED.
To get root access you have to flash SUPERSU in RECOVERY. In that rom at least.
Unbelievable
With Barnes & Noble now selling the Galaxy Tab S2 710 (32gb) for $299 in the U.S. (and an extra 10% off if you're a B&N member), I picked one up yesterday and immediately came here to research rooting and set up. What I found were a lot of guides written a while ago, and a lot of confusing (at least to me) information. So I thought I would consolidate, in one place, in a new thread, what I eventually did, on the assumption that there might be a lot of new Tab S2 owners in the coming weeks. Obviously, you undertake these steps at your own risk, and YMMV. Also, hopefully equally obviously, none of the fantastic tools here are original with me -- credit goes to all those, like chainfire, ashyrx, wanam, engine95 and many more who have built and/or developed them.
1. If your Tab comes with anything but 5.1.1 XXU2BPB1, feel free to take the OTA update. In the US, it's the most current build as of 4.30.16 and you will still be able to root.
2. If you don't already have it, download Odin 3.10.7. You can find it here: http://forum.xda-developers.com/showthread.php?t=2711451
When you run Odin in Windows, probably better to run it in administrator mode (right click on the icon), although I haven't always found that to be necessary.
3. Flash a Custom Recovery using the PDA tab of Odin. Put your Tab into Download mode by turning it off, then pressing and holding the Home, Power and Volume Down buttons all at the same time. When the download screen comes up, press the Volume Up button to continue. Now you're ready to attach your Tab to your PC. Load TWRP 3.0.2-1 from Ashyx's thread here: http://forum.xda-developers.com/tab-s2/development/recovery-twrp-2-8-7-x-lollipop-5-1-1-t3205686 into Odin. Follow his instructions carefully -- once the custom recovery flashes, you have to manually reboot into the new recovery (so untick the auto-reboot option in Odin) or else your new custom recovery gets overwritten and you go back to your stock recovery.
4. Backup your Stock Rom -- While you're still in TWRP (or if you've already rebooted, go back to it), it would make sense to do a full backup of your stock ROM. That way you can restore your Tab to its original state if you ever need or want to.
5. Root -- Here's where I found the most confusion on these forums. You can do a systemless root -- i.e., keeping a stock, SE Enforcing, kernel (as opposed to flashing a permissive kernel and always getting the red SE Noneforcing Kernel message on a reboot and/or needing to use CF-Auto-Root). All you need to do is install Super SU 2.71 (BETA). Get the zip from here: http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133 and put it on your Tab. Then flash using the "Install" choice within your TWRP recovery. Reboot -- and when TWRP asks you whether you want to install SuperSU because you're not rooted -- you have to say "NO" (OK, that's counterintuitive, but chainfire's instructions are clear).
5. Debloat -- That's beyond this thread's scope, but I recommend Titanium Backup from the Play Store. If you want to get rid of the "Nook" logo on reboot, flash the zip file from post #2 of Engine95's thread (using TWRP) found here: http://forum.xda-developers.com/tab-s2/development/rom-neked-nook-oj1-5-1-1-710-t3317823
6. SD Card Fix -- if you find your third party apps can't write to your SD Card, the attachment below describes how to fix it. If this type of editing scares you (make a backup first!), the Play Store app SD Card Fix supposedly still works with Lollipop and you can try that.
7. Netflix Fix -- for some reason, Netflix doesn't like root on the Nook Tab. The fix for this is as simple as renaming the file "system/lib/liboemcrypto.so" (using a root explorer of your choice) as "system/lib/liboemcrypto.so.bak"
8. Xposed -- I happen to like Xposed and don't find it messes up anything, while giving you a ton of customization options. Installation is a two-step process. First, find the correct version of wanam's Xposed zip from here: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960, and flash it using TWRP. For Lollipop on the S2, I used his SDK 22-arm version (SDK 23 is for Marshmallow). Don't worry if the reboot takes a long time -- that's normal. Then, once rebooted, simply install wanam's Xposed apk (XposedInstaller_3.0_Alpha4) that's available in the same thread.
That's it. I hope this saves some of you a lot of my trial and error, and, if it does, please press the "thanks" button.
EDIT -- Here's a #9 I just discovered --- Microsoft Office apps, although pre-installed on the device, will not open once you're rooted (or maybe it's just flashing TWRP that does it). Moreover, if you uninstall and try a re-install from the Play Store, if you're like me, you'll get a device not compatible message. My solution was to sideload the apks (e.g., Word, Excel and Powerpoint) from my Note 4, but I suspect you could also change your device ID within your build.prop file (backup first!) and get a similar result.
ANOTHER EDIT (5.2.16) -- #10 -- I can't get Google Play Movies to work at all on my T710 after rooting. Tried renaming libemcrypto.so without luck. Tried editing boot.prop to disguise myself as a Nexus 10. Tried the Xposed module Root Cloak. All no good. Any suggestions welcome!
Thanks! I just got a new nook and have started to come into these forums and also noticed the old and randomly updated threads. I appreciate the clear instructions. Are there any roms right now that you are recommending?
rawdikrik said:
Thanks! I just got a new nook and have started to come into these forums and also noticed the old and randomly updated threads. I appreciate the clear instructions. Are there any roms right now that you are recommending?
Click to expand...
Click to collapse
Sorry, I'm trying to stick with stock. Engine95's rom seems to have some happy users though....
how do you manual reboot to recovery mode after download mode? i have tried the (pwr+vol up+home) but it does not work at all.. once i reboot normally the TWRP which i flashed cannot get installed at all. I need HELP!
As I begin rooting process for my J710, and realize that the J710 is still fairly new so I thought I write this post and share my notes with everyone to help your transition goes smoothly.
First thing first, some safety tips.
Know your stock firmware. In this case SM-J710 is the min requirement
Have a stock firmware file downloaded on your PC. There's nothing for US right now, but J710 is not region lock so it matter not which version you chose on Sammobile
Make sure your current and new version match up as much as possible. So J710 should be the first 4 that need to match
Created a Folder on your PC for J710, and organize everything in one place. Samething with phone microSD card
Try to make a habbit out of keeping track of your process. It will help you out alot when things goes wrong and are looking for help. Or if you need to go back and see where you make mistake. Especially useful if you are new at this. Dev can't help you if you don't know what you did yourself.
10min rules. Always give the phone minimum 10 min to boot the first time before you disconnect the battery. Sometimes it just take longer, but 10min is a good start for first booth.
TOOLS you will need.
ODin newest is 3.10, but other version will be fine
Stock USB cable that came with the phone. This will save you the hassle of downloading USB installer, and it makes data transfer from ODin to phone alot safer.
TWRP for J710. right now it's only beta phase, but I beleive its 3.02.
Superuser zip files to be flash upon successful installation of TWRP
BACK UP DATA: With the app you can use ES explorer and back up to you microSD.
With the phone, just plug in to your computer, Copy the phone folder, and create a subfolder on your PC and name it System then paste everything onto that folder. After rooting is done. Re-install the app again, then copy your system folder onto the new system folder of your root phone. Restart your phone, and all your previous login and layout will there the way you left it.
Technically you only need to copy the ANDROID & BACKUP folder for your apps. But the above methods will back up all your media along with apps info, and it alot faster.
I recommend using ES explorer because it will does all the modification for without having to go through TWRP once you have rooted enable. Just enable root, and whatever you want to modify, place it in the correct folder of the phone SYS. Reboot and its done. You won't have to go through TWRP and risk bricking. You can save your modify rom in a zip file and share up here. It like being a developer for dummies.
So before you begin. The number 1 thing you should have is the firmware. SM-J710 from Sammobile. With that being said, I have found 2 links for rooting. They are both similiar process, but the one from XDA is for SM-J710F. and the link from Androidinfo is for SM-J710MN. Depend on your choosing you need to have a backup firmware from the method that you chose.
Now that you have the stockfirmware, and your phone is not the F or MN series. Flash the stock firmware of the method that you chose, and go with the rooting process for that method. here are the links:
XDA Video tutorial http://forum.xda-developers.com/galaxy-j7/how-to/video-root-samsung-galaxy-j7-sm-j710f-t3401790
XDA thread http://forum.xda-developers.com/galaxy-j7/development/recovery-samsung-galaxy-sm-j710f-t3380736
Androidinfotech: http://www.androidinfotech.com/2016/07/root-samsung-galaxy-j7-2016-sm-j710mn.html
This rooting method is working mostly with ODin, odds of you bricking your phone is about the same as winning a lottery. With that being said, make sure everything that you plan on flashing is from J710 and you should be fine.
The J7 is more like an opensource phone from Samsung. It does not have a lot of restriction like the other models such as S series. But you are working with a beta version of TWRP so it might not work out the first time around. If that is the case, flash a different firmware model or wait for a stable version. It not the end of the world if you phone is rooted.
Backtrack to beginning: Flash the stock firmware to begin the process again. WIPING DATA before any process is always a plus.
using ODin: Flash Firmware on "BL" for new version, i forgot which slot it is for the older version
Flash: TWRP and SU on "AP" slot for new version
INTERESTING FACTS: I ran across a thread online that mention backing firmware via Odin is possible. Hopefully someone here on XDA might have an idea on the methods, if such a thing exist. I thought I share this. If only I remember where I ran into that post.
Last notes: During the rooting process, I recommend letting the phone reboot completely as you progress through each phase of the process. the reason for this, is so it will help you identify if the TWRP is not installing, or the kernels is incorrect, or the SU.
Your phone will bootloop if TWRP does not optain write priviledges.
Your kernels will always install, but if TWRP does not have privileges the phone will not boot.
Should you were able to get TWRP, and Kernel to install properly, but fail to get SU to install. You gonna have to play around with other SU version. I would do a TWRP back up should I was able to get it to install, before moving on to SU. This way you won't have to start from the beginning if it doesn't work out.
With that, I leave the rest in your hand. Goodlucks
Vi3tDroidz said:
As I begin rooting process for my J710, and realize that the J710 is still fairly new so I thought I write this post and share my notes with everyone to help your transition goes smoothly.
First thing first, some safety tips.
Know your stock firmware. In this case SM-J710 is the min requirement
Have a stock firmware file downloaded on your PC. There's nothing for US right now, but J710 is not region lock so it matter not which version you chose on Sammobile
Make sure your current and new version match up as much as possible. So J710 should be the first 4 that need to match
Created a Folder on your PC for J710, and organize everything in one place. Samething with phone microSD card
Try to make a habbit out of keeping track of your process. It will help you out alot when things goes wrong and are looking for help. Or if you need to go back and see where you make mistake. Especially useful if you are new at this. Dev can't help you if you don't know what you did yourself.
10min rules. Always give the phone minimum 10 min to boot the first time before you disconnect the battery. Sometimes it just take longer, but 10min is a good start for first booth.
TOOLS you will need.
ODin newest is 3.10, but other version will be fine
Stock USB cable that came with the phone. This will save you the hassle of downloading USB installer, and it makes data transfer from ODin to phone alot safer.
TWRP for J710. right now it's only beta phase, but I beleive its 3.02.
Superuser zip files to be flash upon successful installation of TWRP
BACK UP DATA: With the app you can use ES explorer and back up to you microSD.
With the phone, just plug in to your computer, Copy the phone folder, and create a subfolder on your PC and name it System then paste everything onto that folder. After rooting is done. Re-install the app again, then copy your system folder onto the new system folder of your root phone. Restart your phone, and all your previous login and layout will there the way you left it.
Technically you only need to copy the ANDROID & BACKUP folder for your apps. But the above methods will back up all your media along with apps info, and it alot faster.
I recommend using ES explorer because it will does all the modification for without having to go through TWRP once you have rooted enable. Just enable root, and whatever you want to modify, place it in the correct folder of the phone SYS. Reboot and its done. You won't have to go through TWRP and risk bricking. You can save your modify rom in a zip file and share up here. It like being a developer for dummies.
So before you begin. The number 1 thing you should have is the firmware. SM-J710 from Sammobile. With that being said, I have found 2 links for rooting. They are both similiar process, but the one from XDA is for SM-J710F. and the link from Androidinfo is for SM-J710MN. Depend on your choosing you need to have a backup firmware from the method that you chose.
Now that you have the stockfirmware, and your phone is not the F or MN series. Flash the stock firmware of the method that you chose, and go with the rooting process for that method. here are the links:
XDA Video tutorial http://forum.xda-developers.com/galaxy-j7/how-to/video-root-samsung-galaxy-j7-sm-j710f-t3401790
XDA thread http://forum.xda-developers.com/galaxy-j7/development/recovery-samsung-galaxy-sm-j710f-t3380736
Androidinfotech: http://www.androidinfotech.com/2016/07/root-samsung-galaxy-j7-2016-sm-j710mn.html
This rooting method is working mostly with ODin, odds of you bricking your phone is about the same as winning a lottery. With that being said, make sure everything that you plan on flashing is from J710 and you should be fine.
The J7 is more like an opensource phone from Samsung. It does not have a lot of restriction like the other models such as S series. But you are working with a beta version of TWRP so it might not work out the first time around. If that is the case, flash a different firmware model or wait for a stable version. It not the end of the world if you phone is rooted.
Backtrack to beginning: Flash the stock firmware to begin the process again. WIPING DATA before any process is always a plus.
using ODin: Flash Firmware on "BL" for new version, i forgot which slot it is for the older version
Flash: TWRP and SU on "AP" slot for new version
INTERESTING FACTS: I ran across a thread online that mention backing firmware via Odin is possible. Hopefully someone here on XDA might have an idea on the methods, if such a thing exist. I thought I share this. If only I remember where I ran into that post.
Last notes: During the rooting process, I recommend letting the phone reboot completely as you progress through each phase of the process. the reason for this, is so it will help you identify if the TWRP is not installing, or the kernels is incorrect, or the SU.
Your phone will bootloop if TWRP does not optain write priviledges.
Your kernels will always install, but if TWRP does not have privileges the phone will not boot.
Should you were able to get TWRP, and Kernel to install properly, but fail to get SU to install. You gonna have to play around with other SU version. I would do a TWRP back up should I was able to get it to install, before moving on to SU. This way you won't have to start from the beginning if it doesn't work out.
With that, I leave the rest in your hand. Goodlucks
Click to expand...
Click to collapse
I Root the Device but After root there were many issues..... I Keep on getting an notification that unauthorized action ...
and also my device keeps lagging it lags just for a second but this games every 2-3 mins
I also freezed KNOX with lucky patcher but the problem still persists any meathod to solve the problem Thanks
Thanks
Sent from my SM-J710MN using Xparent BlueTapatalk 2
Hi All
Looking for a best tutorial to follow and the right one for my phone really don't want to brick it, obviously :/. as there seems to be a few versions for the S7
I have the following: S7 android 8.0.0 SM-G930F not sure what else I need to know! I'm in the UK so I assume UK phones come with Exynos cpu's
and as far as I am aware android 8 is Oreo! but when they say Stock Rom I assume they mean the same as what came with the phone the original rom?
if so is there an alternative stable rom without the crap included or is it just as simple to delete every thing you don't want now it's rooted! and does that mean if I reset the phone its back to normal with all the crap included! or is there a way to keep it rooted even after reset! and should anything be disabled I.e prepare the phone before attempting to root like any kind of auto encryption that needs disabling and just one more question
if at anytime the rooting process hangs for a ridiculous amount of time when should I throw in the towel! and what are the chances of retrieving the phone back to original state! or does a dirty shutdown brick it?.
I started the root process but failed at first hurdle!, followed instructions install Odin3_v3.13.1 but when I connected the phone nothing showed up in Odin? though I will have another go just to confirm I followed it correctly, I'll update this when it's done.
this was the tutorial I followed:
Easy 4 Newbie [Root Guide]SM-G930F, G935F, G930FD, G935FD (Samsung Galaxy S7 Edge)
Warning ! Please note that the official TWRP for Nougat on Galaxy S7/ S7 Edge is not available yet but based on my experience the Marshmallow version is working on Nougat. By installing a custom recovery on your S7 and S7 Edge and rooting it...
forum.xda-developers.com
I know alot of questions I would really appreciate any help and clarification on the above.
many thanks
Regards
Daz
Look pal, rooting the phone is just like being an adult, it means you will get rid of Samsung's "Child Care".
Yes, UK models use Exynos chip, but you have to be sure, look at your baseband version, if it is G930FXXX, then you are good.
ROMs are in two shapes:
Stock-based: These are just like the one you are using, or other Samsung phones does, like Samsung Experience, One UI, TouchWiz. Maybe MIUI and FlymeOS will come into account, as there are ROMs based on them + Samsung's.
AOSP: These are pure Android ROMs, with few modifications to the core, but keeping the UI as close to the source as possible, Google & OnePlus phones come with a near-to-pure operating systems.
Changing a ROM is not risky, as long as you follow the instructions, without any unaccounted improvising.
Before you install a ROM, read the working and bug list, to make sure you are installing something you have an idea of.
You need to install TWRP recovery (or any other one you like), and format data, in order to be able to travel among ROMs and/or root your device.
Formatting is only required because the phone is forcibly encrypted, and TWRP can not decrypt it, at least not for this device.
Rooting is simply about flashing a 5-MB file, Magisk, then rebooting to system, no need to wipe data.
No need to do any additional steps, unless you are trying to hide root from some apps and/or pass SafetyNet.
Mohamedkam000 said:
Look pal, rooting the phone is just like being an adult, it means you will get rid of Samsung's "Child Care".
Yes, UK models use Exynos chip, but you have to be sure, look at your baseband version, if it is G930FXXX, then you are good.
ROMs are in two shapes:
Stock-based: These are just like the one you are using, or other Samsung phones does, like Samsung Experience, One UI, TouchWiz. Maybe MIUI and FlymeOS will come into account, as there are ROMs based on them + Samsung's.
AOSP: These are pure Android ROMs, with few modifications to the core, but keeping the UI as close to the source as possible, Google & OnePlus phones come with a near-to-pure operating systems.
Changing a ROM is not risky, as long as you follow the instructions, without any unaccounted improvising.
Before you install a ROM, read the working and bug list, to make sure you are installing something you have an idea of.
You need to install TWRP recovery (or any other one you like), and format data, in order to be able to travel among ROMs and/or root your device.
Formatting is only required because the phone is forcibly encrypted, and TWRP can not decrypt it, at least not for this device.
Rooting is simply about flashing a 5-MB file, Magisk, then rebooting to system, no need to wipe data.
No need to do any additional steps, unless you are trying to hide root from some apps and/or pass SafetyNet.
Click to expand...
Click to collapse
Hi Mohamedkam000
Thanks for replying. I'm not confused about why I want to root the phone. I'm just trying to understand the inner workings and the risks as I'm not as clued up with phone OS's as I am windows. I don't care about warrantees or hiding the the fact it's rooted I just want a clean rooted phone free of big brother well inside at least I know you will never completely keep them out but making it hard is a start lol.
Thank you very much for all the above especially on clarifying about the roms and the reason TWRP formats due to encryption nice one
My Baseband version slightly different though it's G930FXXU8ETI3 not sure if having a U instead of a third X makes any difference!
and I posted wrong tutorial I'm actually following this one below again not sure if that matters.
Guide How to root Android 8.0 Oreo Stock ROM on Galaxy S7 ( 100% Working )
Hi . i see too many peoples have problem on rooting Android 8.0 Oreo Stock Rom on Galaxy S7 ( edge ) and they cant get passed from the verification field error ! ok its bcuz they do only 1 step wrong , here i just wanna tell you all the steps 1...
forum.xda-developers.com
Again many thanks for clarifying that lot up very informative and much appreciated.
Kind regards
Daz
CitizenSmith said:
Hi Mohamedkam000
Thanks for replying. I'm not confused about why I want to root the phone. I'm just trying to understand the inner workings and the risks as I'm not as clued up with phone OS's as I am windows. I don't care about warrantees or hiding the the fact it's rooted I just want a clean rooted phone free of big brother well inside at least I know you will never completely keep them out but making it hard is a start lol.
Thank you very much for all the above especially on clarifying about the roms and the reason TWRP formats due to encryption nice one
My Baseband version slightly different though it's G930FXXU8ETI3 not sure if having a U instead of a third X makes any difference!
and I posted wrong tutorial I'm actually following this one below again not sure if that matters.
Guide How to root Android 8.0 Oreo Stock ROM on Galaxy S7 ( 100% Working )
Hi . i see too many peoples have problem on rooting Android 8.0 Oreo Stock Rom on Galaxy S7 ( edge ) and they cant get passed from the verification field error ! ok its bcuz they do only 1 step wrong , here i just wanna tell you all the steps 1...
forum.xda-developers.com
Again many thanks for clarifying that lot up very informative and much appreciated.
Kind regards
Daz
Click to expand...
Click to collapse
It doesn't matter which version of Android you are using, root is the same.
However, on stock ROMs, it might sometimes get rough, as you may end up with Wi-Fi not working (happened to me Q1 2020).
If you really want to learn how Android OS works, then rooting the stock ROM is not your way.
Try AOSP ROMs, preferably start with Oreo ones, you can root in 3 common way, LineageOS SU Add-on, Magisk, Super SU.
But before you tickle your phone, you have to make a backup of your current device, of every partition, EFS is the most important partition, so make sure it is safe.
Baseband version doesn't matter a lot, unless you're paranoid with updates, it is sorted alphabetically, each string on its own.
The phone is more similar to a linux machine than to a Windows PC.
Edit: To root stock ROM, you have to flash dm verity, so you don't end up encrypted again.
Mohamedkam000 said:
It doesn't matter which version of Android you are using, root is the same.
However, on stock ROMs, it might sometimes get rough, as you may end up with Wi-Fi not working (happened to me Q1 2020).
If you really want to learn how Android OS works, then rooting the stock ROM is not your way.
Try AOSP ROMs, preferably start with Oreo ones, you can root in 3 common way, LineageOS SU Add-on, Magisk, Super SU.
But before you tickle your phone, you have to make a backup of your current device, of every partition, EFS is the most important partition, so make sure it is safe.
Baseband version doesn't matter a lot, unless you're paranoid with updates, it is sorted alphabetically, each string on its own.
The phone is more similar to a linux machine than to a Windows PC.
Edit: To root stock ROM, you have to flash dm verity, so you don't end up encrypted again.
Click to expand...
Click to collapse
Thanks again for clearing quite a few things up I thought rooting stock rom would have been far safer way forward wow how wrong was I! but I guess I am just trying to find any kind simile to windows in any way but as you pointed out again it's more like Linux which again I've only played around with ubuntu and mint for a short period so again not to up on Linux lol.
It's funny I was just reading up on AOSP ROMs then got your message. I see they have a stable but not complete! Android 10 not that I would consider it need as I need a stable OS so Oreo is fine for me.
I have backed up phone using Smart Switch on the PC I assume that copy's every thing that's needed, I reset the phone in anticipation all be it prematurely but at least it restored all my data so if anything that was a good test of the back up at least .
I will have look at some AOSP ROMs and see what's involved there, I'll check out their tutorial hopefully it will include the whole process including root.
I gather by your comment using a AOSP ROM you don't need to use dm-verity or will that still be needed!.
The first thing to do is to flash (install) TWRP, it's a custom recovery (think of it as a mini OS that can boot before Android), that will be the base for any of your future tinkering.
Here is the thread, read the FP carefully: [Recovery][Exynos] Official TWRP for Galaxy S7 (herolte)
Once TWRP installed, you can do many things:
Install addons like Magisk. Magisk is the tool you use to obtain root. Forget SuperSU, its outdated, and don't works in modern versions of Android.
Install a custom ROM (this subforum is the perfect place to find them).
Backup & restore an image of your current ROM (very useful).
mooms said:
The first thing to do is to flash (install) TWRP, it's a custom recovery (think of it as a mini OS that can boot before Android), that will be the base for any of your future tinkering.
Here is the thread, read the FP carefully: [Recovery][Exynos] Official TWRP for Galaxy S7 (herolte)
Once TWRP installed, you can do many things:
Install addons like Magisk. Magisk is the tool you use to obtain root. Forget SuperSU, its outdated, and don't works in modern versions of Android.
Install a custom ROM (this subforum is the perfect place to find them).
Backup & restore an image of your current ROM (very useful).
Click to expand...
Click to collapse
Thanks Mooms for the input
I tried to follow your links tutorial which he gives three options only one is any good to me and that was installing twrp using Odin but I'm having issues at every turn!. I can't even get Odin to recognise my phone it just wont pick it up I have Samsung driver installed and I have reinstalled many times I found an article claim to have a workaround but that was BS just selling some other app I even change the driver as described on there page,
7 Tips to Fix Odin Not Detecting Phone
Are you using Odin flash tool to flash your Samsung phone but it is not recognized by Odin? Here are 7 tips to fix Odin not detecting phone.
www.imyfone.com
.
but that did nothing so reinstall normal driver again.
feels like it's just not meant to be :/
Thanks again.
CitizenSmith said:
Thanks again for clearing quite a few things up I thought rooting stock rom would have been far safer way forward wow how wrong was I! but I guess I am just trying to find any kind simile to windows in any way but as you pointed out again it's more like Linux which again I've only played around with ubuntu and mint for a short period so again not to up on Linux lol.
It's funny I was just reading up on AOSP ROMs then got your message. I see they have a stable but not complete! Android 10 not that I would consider it need as I need a stable OS so Oreo is fine for me.
I have backed up phone using Smart Switch on the PC I assume that copy's every thing that's needed, I reset the phone in anticipation all be it prematurely but at least it restored all my data so if anything that was a good test of the back up at least .
I will have look at some AOSP ROMs and see what's involved there, I'll check out their tutorial hopefully it will include the whole process including root.
I gather by your comment using a AOSP ROM you don't need to use dm-verity or will that still be needed!.
Click to expand...
Click to collapse
AOSP ROMs are pure, you can't say they are not complete. They are complete, and what OEMs do, like Samsung and Xiaomi is just a customization that you can do, too.
It is preferred that when you take a backup, take it with TWRP, just to ensure you backed up phone's partitions, along with "EFS".
The root procedure on Android 6+ is done by patching the Kernel (boot.img), so unless you take backup of that, you cannot keep root.
There are stable custom ROMs, custom ROMs are meant for custom adjustments, however the stability depends on your phone, and the way you use it, you can compare AOSP vs. Stock and see the difference.
AOSP ROMs doesn't need dm verity, well, at least not if the developer did not mention the encryption part.
Mohamedkam000 said:
AOSP ROMs are pure, you can't say they are not complete. They are complete, and what OEMs do, like Samsung and Xiaomi is just a customization that you can do, too.
It is preferred that when you take a backup, take it with TWRP, just to ensure you backed up phone's partitions, along with "EFS".
The root procedure on Android 6+ is done by patching the Kernel (boot.img), so unless you take backup of that, you cannot keep root.
There are stable custom ROMs, custom ROMs are meant for custom adjustments, however the stability depends on your phone, and the way you use it, you can compare AOSP vs. Stock and see the difference.
AOSP ROMs doesn't need dm verity, well, at least not if the developer did not mention the encryption part.
Click to expand...
Click to collapse
Some of the roms I have looked at mention external touch buttons at bottom of phone do not work or something else in the phone I'm just reading their comments.
I understand about the stock & custom rom's now that's not my problem at least not at the moment as I am miles away from choosing a rom! as I can't even get out the starting gate!. I can not get TWRP on my phone as the only way I can see to get it on a unrooted! phone is to use Odin but as I said Odin doesn't work at least not for me it does not see my phone. I would love to take a back up using twrp but that won't happen until I find a way to get TWRP on a unrooted phone. what crazy paradox is this!. you can't root phone without twrp installed and twrp won't install on a unrooted phone!. that makes perfect sense.
CitizenSmith said:
Some of the roms I have looked at mention external touch buttons at bottom of phone do not work or something else in the phone I'm just reading their comments.
I understand about the stock & custom rom's now that's not my problem at least not at the moment as I am miles away from choosing a rom! as I can't even get out the starting gate!. I can not get TWRP on my phone as the only way I can see to get it on a unrooted! phone is to use Odin but as I said Odin doesn't work at least not for me it does not see my phone. I would love to take a back up using twrp but that won't happen until I find a way to get TWRP on a unrooted phone. what crazy paradox is this!. you can't root phone without twrp installed and twrp won't install on a unrooted phone!. that makes perfect sense.
Click to expand...
Click to collapse
Does your phone allow MTP communication? I mean can you transfer files when the phone is turned on?
Does the phone show any notification about a usb connection?
If not, then you have probably a bad USB cable, at least, or you have a hardware issue that can go as deep as a burned charging port.
If yes, then either your USB cable is not as fast as the phone requires, or you haven't installed the Samsung USB Drivers on your PC.
Unfortunately, you cannot root your device without PC, at least not since Lollipop.
CitizenSmith said:
Thanks Mooms for the input
I tried to follow your links tutorial which he gives three options only one is any good to me and that was installing twrp using Odin but I'm having issues at every turn!. I can't even get Odin to recognise my phone it just wont pick it up I have Samsung driver installed and I have reinstalled many times I found an article claim to have a workaround but that was BS just selling some other app I even change the driver as described on there page,
7 Tips to Fix Odin Not Detecting Phone
Are you using Odin flash tool to flash your Samsung phone but it is not recognized by Odin? Here are 7 tips to fix Odin not detecting phone.
www.imyfone.com
.
but that did nothing so reinstall normal driver again.
feels like it's just not meant to be :/
Thanks again.
Click to expand...
Click to collapse
Which version of Odin are you using ?
Use this version (latest): Odin v3.14.4
Which version of the Samsung USB drivers are you using ?
Use this version (latest): https://developer.samsung.com/mobile/android-usb-driver.html
Mohamedkam000 said:
Does your phone allow MTP communication? I mean can you transfer files when the phone is turned on?
Does the phone show any notification about a usb connection?
If not, then you have probably a bad USB cable, at least, or you have a hardware issue that can go as deep as a burned charging port.
If yes, then either your USB cable is not as fast as the phone requires, or you haven't installed the Samsung USB Drivers on your PC.
Unfortunately, you cannot root your device without PC, at least not since Lollipop.
Click to expand...
Click to collapse
Hi
Yes I can transfer files.
Yes phone asks to allow or block file transfer and it ohone shows up in Devices and Drives list and I can access the phone directory and shows up as Samsung s7 icon.
I will try another USB lead but the one I'm using is new and wasn't cheap but still a possibility I have had leads that weren't suitable for other things I was trying so it is worth a try.
Thanks
mooms said:
Which version of Odin are you using ?
Use this version (latest): Odin v3.14.4
Which version of the Samsung USB drivers are you using ?
Use this version (latest): https://developer.samsung.com/mobile/android-usb-driver.html
Click to expand...
Click to collapse
When I downloaded Odin this was latest one Odin3_v3.13.1 though I have doubts that one version update will fix this issue as I did not see many if any people having my issue so they all used Odin and I believe theirs are fine even with older versions! but as I said Mohamedkam it's worth a try I will down load that version and give it a try.
As for the Samsung usb driver I believe that is where I got mine
SAMSUNG_USB_Driver_for_Mobile_Phones no version visible under properties on file version 1.7.23.0.
The USB connection seems to be fine I have uninstalled then re-download and reinstalled a couple of times.
I can transfer files no problem it shows up as Galaxy S7 Icon with card and phone drive inside.
I'll update shortly thank you.
Update:
I just went to try new Odin and whilst checking my phone have seen I have Offical TWRP app installed? I have no clue as to how that's got in there! as Odin did not show phone so I could select nothing!.
In the phone I open app and if i select backup existing recovery it opens and Select Folder tab and under that Selected Folder: /sdcard Filename: Recovery .img and at the bottom of screen Root access required.
I just hope it's installed correctly!. it is showing in playstore my apps as well just to confirm. if this is now installed what should I do next Now not sure what tutorial to start following.
I am just going to try the new odin and see if it picks up the phone back soon.
OK Seem that it now shows up in the new Odin. at least I think it has! in the log window I see this: <ID:0/004> Added!!
I didn't see that before.
Would be grateful if you could tell me how to proceed from here!
Correct, you don't need he latst version of Odin or the Samsung drivers, bit it was just to be sure.
You need to be in download mode, but before, you must have checked OEM unlock & USB debug in developer options (mandatory).
I've written a tutorial with images here (in French):
Samsung Galaxy S7 (edge) - Mangez un Oreo! [Topic Unique] - Page : 487 - Téléphone Android - Technologies Mobiles - FORUM HardWare.fr
mooms said:
Correct, you don't need he latst version of Odin or the Samsung drivers, bit it was just to be sure.
You need to be in download mode, but before, you must have checked OEM unlock & USB debug in developer options (mandatory).
I've written a tutorial with images here (in French):
Samsung Galaxy S7 (edge) - Mangez un Oreo! [Topic Unique] - Page : 487 - Téléphone Android - Technologies Mobiles - FORUM HardWare.fr
Click to expand...
Click to collapse
As I said the older version did not show any kind of data what's so ever and the phone was in download mode. phone displayed "Downloading" which I believe it says that even if it's not doing anything! so a tutorial explained. I think it must have installed the Official TWRP app even though phone did not show up in Odin everything was blank however when I installed the new version of Odin like you suggested it then showed up as <ID:0/004> Added!!. so your suggestion work thanks for that and I did enable OEM unlock & USB debug I did long time ago.
I would check out your tutorial but unfortunately I don't speak French and translating instructions is too risky but thank you for the offer but I'll carry on look around still undecided on what custom rom to go for as I said some comments point out small issues and the developers also state certain things are not working so that is making it hard to consider one if you know what I mean.
Again Thank you for your input very much appreciated.
CitizenSmith said:
As I said the older version did not show any kind of data what's so ever and the phone was in download mode. phone displayed "Downloading" which I believe it says that even if it's not doing anything! so a tutorial explained. I think it must have installed the Official TWRP app even though phone did not show up in Odin everything was blank however when I installed the new version of Odin like you suggested it then showed up as <ID:0/004> Added!!. so your suggestion work thanks for that and I did enable OEM unlock & USB debug I did long time ago.
I would check out your tutorial but unfortunately I don't speak French and translating instructions is too risky but thank you for the offer but I'll carry on look around still undecided on what custom rom to go for as I said some comments point out small issues and the developers also state certain things are not working so that is making it hard to consider one if you know what I mean.
Again Thank you for your input very much appreciated.
Click to expand...
Click to collapse
Take a note that, when you flash TWRP, you have to boot immediately to the recovery, so as to enforce its existence, cause I remember they phone has an original recovery backed up somewhere, and gets triggered when you reboot directly to system instead of the unofficial binary.
I advise you to watch guides on YouTube, it's more .. understandable.
CitizenSmith said:
still undecided on what custom rom to go for as I said some comments point out small issues and the developers also state certain things are not working so that is making it hard to consider one if you know what I mean.
Again Thank you for your input very much appreciated.
Click to expand...
Click to collapse
I recommend to go with ALEXNDR ROM: zero bugs, everything works perfectly (it's based on stock ROM).
[ROM][G930F/FD][ALEXNDR] * U8EUE1 * DevBase v7.4 * Encryption support [Jul-10]
Important notes for Developers / Chefs !!! This ROM is NOT based on any other custom ROM. My work contains many original ideas and innovations that I introduced as the first in the ROM development (see "Changelist" in post #2). Of course, it...
forum.xda-developers.com
Mohamedkam000 said:
Take a note that, when you flash TWRP, you have to boot immediately to the recovery, so as to enforce its existence, cause I remember they phone has an original recovery backed up somewhere, and gets triggered when you reboot directly to system instead of the unofficial binary.
I advise you to watch guides on YouTube, it's more .. understandable.
Click to expand...
Click to collapse
Yer I read that but I've ended up with TWRP installed and did not do that process because I was unaware it installed until it showed up.
As I said I'll just keep looking for now I know I'll find one that works for me from start to finish.
and I've been checking youtube but wouldn't want to use any links their providing but it may help familurise myself with the whole process if i watch enough of them.
Thanks again for your help.
mooms said:
I recommend to go with ALEXNDR ROM: zero bugs, everything works perfectly (it's based on stock ROM).
[ROM][G930F/FD][ALEXNDR] * U8EUE1 * DevBase v7.4 * Encryption support [Jul-10]
Important notes for Developers / Chefs !!! This ROM is NOT based on any other custom ROM. My work contains many original ideas and innovations that I introduced as the first in the ROM development (see "Changelist" in post #2). Of course, it...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi Mooms
I will check that out many thanks. I wonder if you could help me here. I am in the middle of the rooting process but have hit a snag. again!
I have now installed TWRP successfully then no-verity-opt-encrypt-3.1 all went fine and I'm at point of flashing Magisk but have an issue when I swipe to flash is gives me a error in red saying "invalid zip file format !"
I downloaded it from github here.
GitHub - topjohnwu/Magisk: The Magic Mask for Android
The Magic Mask for Android. Contribute to topjohnwu/Magisk development by creating an account on GitHub.
github.com
I click on "code" tab and then "download zip" and I placed that in a download folder on my sd card when I select it I get the above error any ideas as to why I am getting this am I downloaded the correct file?
thanks for any assistance you could give.