Hi a mate of mine has bought R-BOX Android 5.1.1 RK3229 2G/8G but it was rebooting every 5 mins. He has played around with it no its stuck at boot up.
Anyone know where i can get firmware for it please and how to reflash?
Mine was doing that until it finished building an index of my library over SMB. He might find that once he has an index, it's more stable.
I think he stuck in recover mode at the min
Related
Hello guys im new here and i'm new with that that are you guys doing there,i need some help with my phone... (updating android) let's start from the beginning
i had android 4.4.2 i updated it to lollipop but after a year i decided go back to android 4.4.2 because some functions didint worked on lolipop, so i did that, but now when i did that after maybe 1 month my sim card connectivity disappear... i tried resetting, recovering, didn't help so now i tried to update it back to lollipop but i cant it crashes with error, it even stuck (bootloop i think it was USB LOGO PICTURE) but i managed to recover it any suggestion how i should update my phone to lollipop?
Android version V.22.40.54
tried updating to this version V3.24.40.78
Hi.
Short history. I tried to flash an update on my MXQ-4K, It failed and now it's bricked. I can enter the Maskrom Mode and flash a New rom but none of the ones that I found worked. Some ROMs just doesn't boot and others stay frozen with a bugged screen. The only firmware that worked and booted os not for the MXQ-4K, is for MK809IV so the Wi-Fi and the remote Control doesn't work. What can I do? Anyone have a real stock firmware for this?
MXk-4k have so many different fake variations, so the best way is to open the housing and check which wifi chip this device used. And then find firmware for this chip + your SoC and 90% even RC will work with it
I. order a amlogic it was a RK322A version Android 6.1.1 ARM
everything works KingRoot , Netflix , Kodi etc........ (for my kids)
now I,m waiting for my X96 Mini 2g ram 16gb flash 2ghz Amlogic s905w 64bit
Thought i'd post my experience after a few days of pain in order that it might help someone else. XDA forum was complex in info but couldn't have been more valuable. I'll reference helpful posts below.
Car:Kia Sorento 2010
Head Unit: Pumpkin Android CN10
Android version: 6.01
Processor: quadcore-R16
Model / SKU: CN10-02201b-02A
Model is no longer available on amazon.
After a few weeks of use all the apps stopped launching and just returned to the home screen. Radio (UK) was dropping out every 30 seconds. The time never stayed set and changing it seems to have a bug that affects the system. Thats as much as I got from pumpkin forums. The weird thing was that there was no MCU info on the about screen.
So contacted Pumpkin who provided firmware updates. I would have thought it possible for manufacturers to track products, hardware and firmwares in a version control system but they insist on email 1-1 with firmware upgrades as solutions- but that's another story.
First round of firmware seemed to have bricked it - it was stuck in a boot loop or not booting at all. 3-4 firmware updates via some frosty email exchanges and its still stuck on boot with android logo.
Thats taken 7 days. Ouch
Then managed to find this thread https://forum.xda-developers.com/android-auto/android-head-units/allwinner-r16-astard7-android-6-0-1-t3523906
Since it mentioned the 'Allwinner quad core R16' i assumed it was relevant to this unit due to the chip info above. Since the unit was going back for a refund i didn't worry too much about screwing it up further.
So i took the rar file link from here:
KED1 (MEDEKE?) firmware (thanks):
V7.3.1_20170720.152039_KED1
"V7.3.2_20170826.102252_KED1.rar"
unpacked it on to sdcard:
81cb828c-9b57-11e6-ad2a-df6786178d62
827ba428-9b57-11e6-8dfb-37398ea70e52.0
827ba428-9b57-11e6-8dfb-37398ea70e52.1
827ba428-9b57-11e6-8dfb-37398ea70e52.2
Instead of doing what pumpkin said installing one file at a time on sdcard i put them all on root of card altogether and ran the upgrade. To my surprise everything installed OK. Rebooted and its working.
I'm pretty sure Pumpkin have no idea what they are doing with firmware as their forum seems littered with apologies for wrong firmware. Maybe they do . Luckily i have flashed a few roms and persevered with some success. The interface is different from factory settings but I now have a fully functioning radio , bluetooth, and installable sat nav app (map.me).
Some questions lingering in my mind.
1. Is this a eonon base unit?
2. Is there any core factory reset available?
3. Should i try and update the MCU to a newer version as listed in the post above?
4. How can I make a back up of my working settings?
5. Can i get any other GUI updates?
Hope this helps someone else with a CN10 R16 unit
Thanks for all the hardwork mods and devs do thru this forum too.
Hi, I have an old N8010 16GB which was bought from John Lewis in the UK (an official retailer). The tablet has worked great, however recently it screwed up and got stuck in a bootloop.
So I decided to see if I can try to recover it and that's why I am here. I tried Odin and started putting what I thought is the correct firmware on it, however all the firmwares I try all PASS and seem to install correctly but the device still has a infinte bootloop (it crashes and reboots after the Samsung logo shows). I noticed the PIT file says -8G on one of the firmware files - I guess this means it is for the 8GB version which is clearly not going to work on my 16GB version?
Please can someone guide me on what firmware to download and what to try as I have been trying for 5 hours now and cannot find any way to get it out of this boot loop, I have no problems at all installing firmware as it passes every time with Odin. I am using Odin3 v3.10.7
I'm not sure but I think I need this firmware: N8010XXUCMG1
Killer_Klient said:
Hi, I have an old N8010 16GB which was bought from John Lewis in the UK (an official retailer). The tablet has worked great, however recently it screwed up and got stuck in a bootloop.
So I decided to see if I can try to recover it and that's why I am here. I tried Odin and started putting what I thought is the correct firmware on it, however all the firmwares I try all PASS and seem to install correctly but the device still has a infinte bootloop (it crashes and reboots after the Samsung logo shows). I noticed the PIT file says -8G on one of the firmware files - I guess this means it is for the 8GB version which is clearly not going to work on my 16GB version?
Please can someone guide me on what firmware to download and what to try as I have been trying for 5 hours now and cannot find any way to get it out of this boot loop, I have no problems at all installing firmware as it passes every time with Odin. I am using Odin3 v3.10.7
I'm not sure but I think I need this firmware: N8010XXUCMG1
Click to expand...
Click to collapse
Hey, I had the same problem recently and I fixed it using the stock firmware (can't post the link due to forum rules) and using a patched Odin 3.14.1 3B.
Hope it helps
Lets hope the OP has fixed the problem in the last 10 months .Unknown as he never came back .
Disguise link to post it or bit.ly
Flash this in odin https://forum.xda-developers.com/galaxy-note-10-1/orig-development/recovery-twrp-3-2-3-t3895276
Than flash Android 7.1 https://forum.xda-developers.com/galaxy-note-10-1/development/rom-slimroms-slim7-t4128693
Reboot
Done it is back in use
Hi,
I have a Vanku headunit that is stuck in a bootloop, stuck at Android logo. I bought the unit in November, installed it and it never fastbooted, the wiring is correct, I checked it multiple times. The manufacturer sent me a firmware update, followed their instructions for installing which led to the problem. I asked how to get it in to recovery mode, they suggested it needs a new android board. Here is the info for my unit, hopefully someone can help with getting this thing into recovery mode.
PX30
rk3326_nid-userdebug10 QQ2A.200305.004.A1 eng.hct2.20200810.184222 test-keys
Kernel version
4.19.111+
MCU version
MTCE_HT_V3.60_4
dink0617 said:
Hi,
I have a Vanku headunit that is stuck in a bootloop, stuck at Android logo. I bought the unit in November, installed it and it never fastbooted, the wiring is correct, I checked it multiple times. The manufacturer sent me a firmware update, followed their instructions for installing which led to the problem. I asked how to get it in to recovery mode, they suggested it needs a new android board. Here is the info for my unit, hopefully someone can help with getting this thing into recovery mode.
PX30
rk3326_nid-userdebug10 QQ2A.200305.004.A1 eng.hct2.20200810.184222 test-keys
Kernel version
4.19.111+
MCU version
MTCE_HT_V3.60_4
Click to expand...
Click to collapse
hey, can you post the firmware?