Related
Hi all. I flashed the full system image of KRT16O when it was released. I then flashed with fastboot the CWM 6.0.4.3 recovery image. I then got the OTA to update to KRT16S. I read online that I didnt have to unroot or go back to the stock recovery so I just let it update like normal. It updated fine, loaded up fine, etc. So I then went to use fastboot to reflash the CWM recovery image however all I get is the android on his back with the red triangle.
Am I doing something wrong? Could my recovery partition be screwed? How do I fix it. Thanks!
i should also mention that when I use fastboot to flash the recovery image, it says it was copied/flashed successfully - but it doesn't work.
You didn't flashed recovery or didn't do it correctly. What you saw is stock recovery.
And remember to flash recovery to the correct partition: fastboot flash recovery cwm.img
yea i dont think u flashed it correctly either.
go to clockworkmod, download the latest.... copy it to the platform tools folder. then fastboot flash it again...
thanks guys. Im familiar with the process - when I flashed the factory image KRT16O I then used fastboot to flash CWM just a few days prior without a hitch. But on Friday it just wouldnt "stick". I tried three times, each time it said successful but then after a reboot it would be gone. On the third time though after I flashed it, and it said success, I then went into recovery from the bootloader screen and it was there, so I rebooted and went back and this time it had stayed. strange.
Side note - does debugging need to be on to use fastboot?
I am having the same problem.
After the OTA, CWM won't stick. I get a red triangle.
fastboot screen shows that I have a secure boot, whereas the phone shows the lock as unlocked.
burnski said:
Side note - does debugging need to be on to use fastboot?
Click to expand...
Click to collapse
USB debugging box should be checked in order to use fastboot.
---------- Post added at 01:53 PM ---------- Previous post was at 01:49 PM ----------
yaronkle said:
I am having the same problem.
After the OTA, CWM won't stick. I get a red triangle.
fastboot screen shows that I have a secure boot, whereas the phone shows the lock as unlocked.
Click to expand...
Click to collapse
try to root the phone again and making sure before flashing the CWM, you should erase the old one, use command in fastboot:
fastboot erase recovery
and then
fastboot flash recovery nameofrecovery.img
I got CWM working again. Not sure how.
I disabled ART, reboot and CWM worked.
Enabled ART and CWM still works, just that it asks if I want to install SU again before booting.
First of all i want to say thankyou to the xda community who help people like us and build rooting and other flashing softwares.
So, this is probably my first post on xda, first for sure when i'm stuck and asking for help
Background of the Problem:
I was on OS 2.1.2 rooted with twrp recovery. (was really happy with my phone)
MM 3.0.2 upgrade comes and i decide to upgrade my phone manually (since ota was disabled due to root)
All goes well in first try..(did a dirty flash) OP2 3.0.2 runs smoothly
However, i found out i had lost root and couldn't boot into recovery.
I ignored for a month when i decided it was too hard to go on without root now..
So i searched through a few forums, went into fastboot tried oem unlocking.. failed.. Stuck hard in the bootloop..
Searched for about 3hours and used the MSM tool to finally unlock bootloader.. but still stuck at bootloop and no luck with recovery.. I couldn't boot into my installed rom(3.0.2)
I flashed recovery from OOS 2.1.2 or 2.0.1 and booted into recovery and flashed 2.1.2 again..
So now, 2.1.2 runs fine on my phone
I have refered to these guides/files while trying to install 3.0.2 or trying to recover my phone
http://forum.xda-developers.com/onep...s-3-x-t3392826
https://www.androidfilehost.com/?w=f...f4a13afecc347f
https://www.androidfilehost.com/?w=f...9e2340a15d9033
https://forums.oneplus.net/threads/u...plus-2.347607/
http://forum.xda-developers.com/oneplus-2/general/zip-oxygenos-3-x-t3392826
PROBLEM:
Whenever i update my phone to 3.0.2, it stucks at the bootloop (showing oneplus logo and cmd showing it in fastboot mode)
i lose recovery and rom
i have tried flashing grarak recovery and hybrid recovery (both of which i believe are modded recovery for OOS MM)
In cmd, fastboot flash command completes without any problem but the phone doesnt boot to recovery and both give an error while giving the fastboot boot command
" downloading boot.img
OKAY
booting...
FAILED (remote: dtb not found)"
finished. "
Please suggest me something so that i can boot into 3.0.2 without bootloop problem.. 3.0.2 runs really smooth..
and additionally if possible, i would like to root but thats secondary.
Thankyou guys in advance. Please help a brother out
Sahaj4 said:
First of all i want to say thankyou to the xda community who help people like us and build rooting and other flashing softwares.
So, this is probably my first post on xda, first for sure when i'm stuck and asking for help
Background of the Problem:
I was on OS 2.1.2 rooted with twrp recovery. (was really happy with my phone)
MM 3.0.2 upgrade comes and i decide to upgrade my phone manually (since ota was disabled due to root)
All goes well in first try..(did a dirty flash) OP2 3.0.2 runs smoothly
However, i found out i had lost root and couldn't boot into recovery.
I ignored for a month when i decided it was too hard to go on without root now..
So i searched through a few forums, went into fastboot tried oem unlocking.. failed.. Stuck hard in the bootloop..
Searched for about 3hours and used the MSM tool to finally unlock bootloader.. but still stuck at bootloop and no luck with recovery.. I couldn't boot into my installed rom(3.0.2)
I flashed recovery from OOS 2.1.2 or 2.0.1 and booted into recovery and flashed 2.1.2 again..
So now, 2.1.2 runs fine on my phone
I have refered to these guides/files while trying to install 3.0.2 or trying to recover my phone
http://forum.xda-developers.com/onep...s-3-x-t3392826
https://www.androidfilehost.com/?w=f...f4a13afecc347f
https://www.androidfilehost.com/?w=f...9e2340a15d9033
https://forums.oneplus.net/threads/u...plus-2.347607/
http://forum.xda-developers.com/oneplus-2/general/zip-oxygenos-3-x-t3392826
PROBLEM:
Whenever i update my phone to 3.0.2, it stucks at the bootloop (showing oneplus logo and cmd showing it in fastboot mode)
i lose recovery and rom
i have tried flashing grarak recovery and hybrid recovery (both of which i believe are modded recovery for OOS MM)
In cmd, fastboot flash command completes without any problem but the phone doesnt boot to recovery and both give an error while giving the fastboot boot command
" downloading boot.img
OKAY
booting...
FAILED (remote: dtb not found)"
finished. "
Please suggest me something so that i can boot into 3.0.2 without bootloop problem.. 3.0.2 runs really smooth..
and additionally if possible, i would like to root but thats secondary.
Thankyou guys in advance. Please help a brother out
Click to expand...
Click to collapse
Follow this step one by one ..
1. Flash this recovery via firstboot
https://drive.google.com/file/d/0B0OiN2evbEPuNk5KejhvLWsyeDg/view?usp=drivesdk
2. Now boot into recovery and flash this zip firmware .
https://drive.google.com/file/d/0B0OiN2evbEPucnBkUGZIdlZCSnM/view?usp=drivesdk
3. Now boot into new recovery and flash oxygen os 3.x.x .
That's it.
4. If camera or other sensor not work flash this persist.img file via firstboot.
https://drive.google.com/file/d/0B0OiN2evbEPueVNEQTdUSHJYTHM/view?usp=drivesdk
Jyoti_re said:
Follow this step one by one ..
1. Flash this recovery via firstboot
https://drive.google.com/file/d/0B0OiN2evbEPuNk5KejhvLWsyeDg/view?usp=drivesdk
2. Now boot into recovery and flash this zip firmware .
https://drive.google.com/file/d/0B0OiN2evbEPucnBkUGZIdlZCSnM/view?usp=drivesdk
3. Now boot into new recovery and flash oxygen os 3.x.x .
That's it.
4. If camera or other sensor not work flash this persist.img file via firstboot.
https://drive.google.com/file/d/0B0OiN2evbEPueVNEQTdUSHJYTHM/view?usp=drivesdk
Click to expand...
Click to collapse
Heyy.. Thanks a lot Jyoti_re! It worked out perfectly..
I have done till step 3.. The phone booted into 3.0.2
The sensors are not working. I will flash the presist.img as you said in step 4
However, i have encountered a problem. My OP2 is a 64 GB version. But now the internal storage shows 7gb free out of 9.66 GB.. Earlier it used to show 54GB instead of 9.66..
What should i do?
Thanks again
Yes u must have to flash persist.img via firstboot mode by typing [ fastboot flash persist ] for sensor correctly working.
Install es file explorar from play store and check which folder taking More space
don't forget to press thanks if I helped u.
Thanks a lot Jyoti! /
Yeah i got it.. Flashed the persist img.
i searched through the forums.. somehow my device got the 16gb version img.. i dont know how..
i had to flash userdata64G.img as well
Now it all works perfectly.. sensors are working.. data storage is back at 54gb..
Thanks a lot! I had been stuck on this bootloop since 3 days..
and i pressed the thanks button.. i will press it 100 times over if possible Thanks again! Cheers!
Just to confirm.. Can i flash supersu via recovery now to get root? i hope it wont lead me to bootloops.. If there is some specific supersu file to flash for OOS 3.0.2 please guide me to it.. Thanks!
Sahaj4 said:
Just to confirm.. Can i flash supersu via recovery now to get root? i hope it wont lead me to bootloops.. If there is some specific supersu file to flash for OOS 3.0.2 please guide me to it.. Thanks!
Click to expand...
Click to collapse
Flash this SuperSU
https://drive.google.com/file/d/0B0OiN2evbEPuZk1KSk1hYUpEazA/view?usp=drivesdk
don't forget to press thanks if I helped u.
OP2 stuck in bootloop on upgrading from 2.0.2 to 3.0.2
Hi guys and thanks to all xda developers community for helping us. I'm trying to root my op2 via fastboot,using the comand fastboot oem unlock,but always having this message: <remote oem unlock is disabled>. And when i try to use volume down+power to get in recovery mode the op2 vibrate and flashes the screen and do nothing. I'm not having access to do anything with the op2. Please help...
ciroportugues said:
Hi guys and thanks to all xda developers community for helping us. I'm trying to root my op2 via fastboot,using the comand fastboot oem unlock,but always having this message: <remote oem unlock is disabled>. And when i try to use volume down+power to get in recovery mode the op2 vibrate and flashes the screen and do nothing. I'm not having access to do anything with the op2. Please help...
Click to expand...
Click to collapse
Have u enabled OEM unlocking in developer option ??
No i forgot to enable...
No i forgot to enable... What can i do now?
---------- Post added at 06:44 AM ---------- Previous post was at 06:39 AM ----------
Jyoti_re said:
Have u enabled OEM unlocking in developer option ??
Click to expand...
Click to collapse
No iforgot to enable...
What can i do now?
ciroportugues said:
No i forgot to enable... What can i do now?
---------- Post added at 06:44 AM ---------- Previous post was at 06:39 AM ----------
No iforgot to enable...
What can i do now?
Click to expand...
Click to collapse
Go thru "METHOD 1" of this post and fill free to contact if u face any problem.
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Jyoti_re said:
Go thru "METHOD 1" of this post and fill free to contact if u face any problem.
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Click to expand...
Click to collapse
Hi. I tried to do every steps in method 1,but when i try to enter to recovery mode my op2 vibrate and flash the screen till i stop pressing the power button,and never get into recovery mode.
ciroportugues said:
Hi. I tried to do every steps in method 1,but when i try to enter to recovery mode my op2 vibrate and flash the screen till i stop pressing the power button,and never get into recovery mode.
Click to expand...
Click to collapse
After use the recovery tool the op2 restarts and stuck into powered by android nothing more happens.
ciroportugues said:
After use the recovery tool the op2 restarts and stuck into powered by android nothing more happens.
Click to expand...
Click to collapse
What does the Device Manager show when you connect your phone? By what name is it identified?
Thanks for reply. When i put press volume+and- shows qualcomm hs-usb qdloader9008 (com29),and when i put into fastboot shows android bootloader interface,and when stucks into start shows the same(android bootloader interface).
---------- Post added at 10:06 PM ---------- Previous post was at 09:37 PM ----------
Sahaj4 said:
What does the Device Manager show when you connect your phone? By what name is it identified?
Click to expand...
Click to collapse
Thanks for reply. When i put press volume+and- shows qualcomm hs-usb qdloader9008 (com29),and when i put into fastboot shows android bootloader interface,and when stucks into start shows the same(android bootloader interface).
When you are in fastboot mode..
Try giving the command
"fastboot continue"
or
"fastboot reboot-bootloader"
"fastboot continue"
(without quotes) if your system files are not corrupt, it will boot you into your rom.. and then enable oem unlocking from settings
Tried this commands and the system reboots and stucks on the screen powered by android.
---------- Post added at 12:27 AM ---------- Previous post was at 12:25 AM ----------
Sahaj4 said:
When you are in fastboot mode..
Try giving the command
"fastboot continue"
or
"fastboot reboot-bootloader"
"fastboot continue"
(without quotes) if your system files are not corrupt, it will boot you into your rom.. and then enable oem unlocking from settings
Click to expand...
Click to collapse
Tried this commands but the sistem reboots and stucka on powered by android
ciroportugues said:
Tried this commands and the system reboots and stucks on the screen powered by android.
---------- Post added at 12:27 AM ---------- Previous post was at 12:25 AM ----------
Tried this commands but the sistem reboots and stucks on powered by android
Click to expand...
Click to collapse
Hi. want to know if you anymore command to help me? thanks for help
ciroportugues said:
Hi. want to know if you anymore command to help me? thanks for help
Click to expand...
Click to collapse
I don't know much.. only as much as i have tried..
try running the command
fastboot oem device-info
if your device is unlocked, you are lucky! then there are many options
but if your device is locked.. then as far as i know, msm tool is your only saviour
try using this guide to unbrick your phone
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Hello,
I need help about my yureka plus on android (YU5510A),
I bought yureka plus yesterday and it comes on stock android 4.4.4 (Kitkat), I try to install custom rom and connect my phone to my laptop with help of YUWARE and try to unlock the bootloader in fastboot mode, it shows the successful message, but phone cant restart, I restart it manually, but it stuck on Yureka logo, trying again for flashing TWRP, same thing happen.
My phone (YU5510A) stuck on yureka plus logo.
So please help me.
Best Regards
Sadique A
sadique2804 said:
Hello,
I need help about my yureka plus on android (YU5510A),
I bought yureka plus yesterday and it comes on stock android 4.4.4 (Kitkat), I try to install custom rom and connect my phone to my laptop with help of YUWARE and try to unlock the bootloader in fastboot mode, it shows the successful message, but phone cant restart, I restart it manually, but it stuck on Yureka logo, trying again for flashing TWRP, same thing happen.
My phone (YU5510A) stuck on yureka plus logo.
So please help me.
Best Regards
Sadique A
Click to expand...
Click to collapse
your device is soft bricked from where i see,
download the drives first for your device link :- https://androidmtk.com/download-yu-usb-driver
download adb platform tools:- https://dl.google.com/android/reposi...st-windows.zip
download recovery:- https://dl.twrp.me/tomato/
download the fast-boot firmware:- http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS8A4-tomato-signed-fastboot-a7a306cebd.zip
download factory image maker :- https://drive.google.com/open?id=0BxGRG9YXw62rUWNLMjdNaGt1a2s
method 1
extract the fast boot firmware and factory image maker in same folder. then follow these steps.
put your phone in fast-boot mode and type fastboot -i 0x1ebf oem unlock (will unlock your bootloader)
and now find flash_all.bat file in the folder where you extracted all files and run as admin. let the process finish you would be back at stock firmware with no boot loops.
if you don't want to go to factory image then
method 2
boot your phone in fastboot and type
fastboot -i 0x1ebf oem lock (to lock your bootloader)
fastboot -i 0x1ebf oem unlock (to unlock your boot loader) as you used yuware or something that might created problem in bootloader so follow both.
fastboot -i 0x1ebf flash recovery name_of_recovery.img
and let it flash recovery then boot into recovery go to advance wipe format data type yes and swipe, install any custom rom and flash gapps done.
if you face still boot loops follow method 1 and flash roms later.
P.s while in fast-boot remove sim cards and memory cards from your phone and then run any commands.
and while flashing any roms please do remove sim cards.
Bhavesh_khatri said:
your device is soft bricked from where i see,
download the drives first for your device link :- https://androidmtk.com/download-yu-usb-driver
download adb platform tools:- https://dl.google.com/android/reposi...st-windows.zip
download recovery:- https://dl.twrp.me/tomato/
download the fast-boot firmware:- http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS8A4-tomato-signed-fastboot-a7a306cebd.zip
download factory image maker :- https://drive.google.com/open?id=0BxGRG9YXw62rUWNLMjdNaGt1a2s
method 1
extract the fast boot firmware and factory image maker in same folder. then follow these steps.
put your phone in fast-boot mode and type fastboot -i 0x1ebf oem unlock (will unlock your bootloader)
and now find flash_all.bat file in the folder where you extracted all files and run as admin. let the process finish you would be back at stock firmware with no boot loops.
if you don't want to go to factory image then
method 2
boot your phone in fastboot and type
fastboot -i 0x1ebf oem lock (to lock your bootloader)
fastboot -i 0x1ebf oem unlock (to unlock your boot loader) as you used yuware or something that might created problem in bootloader so follow both.
fastboot -i 0x1ebf flash recovery name_of_recovery.img
and let it flash recovery then boot into recovery go to advance wipe format data type yes and swipe, install any custom rom and flash gapps done.
if you face still boot loops follow method 1 and flash roms later.
P.s while in fast-boot remove sim cards and memory cards from your phone and then run any commands.
and while flashing any roms please do remove sim cards.
Click to expand...
Click to collapse
Need custom recovery
TWRP 3.0.2 not supported by YU5510A
sadique2804 said:
Need custom recovery
TWRP 3.0.2 not supported by YU5510A
Click to expand...
Click to collapse
TWRP is custom recovery itself, using it on my device since year, works fine you might have flashed wrong twrp. Try rom the link provided and remove every thing from phone before flashing twrp.
Bhavesh_khatri said:
TWRP is custom recovery itself, using it on my device since year, works fine you might have flashed wrong twrp. Try rom the link provided and remove every thing from phone before flashing twrp.
Click to expand...
Click to collapse
I know TWRP is custom recovery
But in my phone (YU5510A, Stock Android 4.4.4) it is not supported.
Whenever I am trying to install, it corrupt the recovery and the firmware of my phone.
After installing TWRP 3.0.2.0 (downloaded from official website under tomato section) my phone cant boot, it stuck on YU logo.
If you have the link please share.
sadique2804 said:
I know TWRP is custom recovery
But in my phone (YU5510A, Stock Android 4.4.4) it is not supported.
Whenever I am trying to install, it corrupt the recovery and the firmware of my phone.
After installing TWRP 3.0.2.0 (downloaded from official website under tomato section) my phone cant boot, it stuck on YU logo.
If you have the link please share.
Click to expand...
Click to collapse
Like i said your device is soft bricked try methods i suggested, but recovery should work fine press vol up+ vol down+power button to boot into recovery you would be able to use TWRP. if not try to flash recovery again as i said yuware might have introduced some bugs install as i suggested. your device stuck at boot loop has nothing to do with recovery not working.
---------- Post added at 08:03 PM ---------- Previous post was at 07:50 PM ----------
Try to flash older versions here is 2.8.4.0 if you on kit-kat or any,
https://dl.twrp.me/tomato/twrp-2.8.4.0-tomato.img
https://dl.twrp.me/tomato/twrp-2.8.5.0-tomato.img
https://dl.twrp.me/tomato/twrp-2.8.6.0-tomato.img
type
fastboot -i 0x1ebf flash recovery twrp-2.8.4.0-tomato.img
remove simcards and memory cards while flashing. hope this helps.
I flashed cm12.1 officially signed, and it worked and i recovered my device, but i want to flashed custom rom and it needs a custom recovery.
That's the problem, and I tried 2.8.7 and 2.8.6 and 2.8.5.
Currently I am on official cm12.1 with cm recovery.
I m also facing same problem.
---------- Post added at 08:26 PM ---------- Previous post was at 08:26 PM ----------
sadique2804 said:
I flashed cm12.1 officially signed, and it worked and i recovered my device, but i want to flashed custom rom and it needs a custom recovery.
That's the problem, and I tried 2.8.7 and 2.8.6 and 2.8.5.
Currently I am on official cm12.1 with cm recovery.
Click to expand...
Click to collapse
Your problem solved bro?
sadique2804 said:
I know TWRP is custom recovery
But in my phone (YU5510A, Stock Android 4.4.4) it is not supported.
Whenever I am trying to install, it corrupt the recovery and the firmware of my phone.
After installing TWRP 3.0.2.0 (downloaded from official website under tomato section) my phone cant boot, it stuck on YU logo.
If you have the link please share.
Click to expand...
Click to collapse
TRY TO UNLOCK BOOTLOADER FIRST.
Twrp won't install properly if the bootloader is locked.
IF THIS HELPS CLICK THANKS :good:
Hangs twrp
My phone got hanged at twrp yureka plus yu5510A stock lollipop plz help
ray pember said:
My phone got hanged at twrp yureka plus yu5510A stock lollipop plz help
Click to expand...
Click to collapse
Flash latest version of twrp using adb
Here is the link
https://dl.twrp.me/tomato/twrp-3.1.1-0-tomato.img.html
My device 5510a I install twrp but touch not working properly so plz help me....next what I do
sadique2804 said:
Hello,
I need help about my yureka plus on android (YU5510A),
I bought yureka plus yesterday and it comes on stock android 4.4.4 (Kitkat), I try to install custom rom and connect my phone to my laptop with help of YUWARE and try to unlock the bootloader in fastboot mode, it shows the successful message, but phone cant restart, I restart it manually, but it stuck on Yureka logo, trying again for flashing TWRP, same thing happen.
My phone (YU5510A) stuck on yureka plus logo.
So please help me.
Best Regards
Sadique A
Click to expand...
Click to collapse
hello for yureka i have some files I hope u don't try fastboot cause yureka have limited rom memory i have some files i encountered the worst case . i went to local vendor he did it for 3dollar. nd yes i read some yureka have a different board in the differnet country so files are bit messed up feel free to message i have somefiles try the luck or better search other thread developers are not doing a lot nowadays i was trying ubuntu but somehow sad life
Hii I have yu yureka plus (yu5510a) the phone is starting and stuck at YU logo after that blue screen appears and phone can't go ahead .
And When i connect the phone with pc it can't detected and an error shows in phone that "do not disconnect the data cable" & in bottom left "your phone is not secure" please help
Hi, I'm new to this phone. Just got it 1 week ago. I tried to find any related information on the bootloader unlock and custom recovery, but it is very limited. I think maybe this phone is not well known. I would appreciate if someone can provide me the way to unlock bootloader, flash TWRP and roots. I can't live without magisk and viper4android. Thanks.
Here ya go,
1. Download and install minimal fastboot adb
2.Download TWRP rename it Recovery and move it to minimal fastboot adb folder
3. Unlock bootloader, in fastboot enter the following code : fastboot oem nubia_unlock NUBIA_NX595J
4. then also in fastboot: fastboot flash recovery recovery.img
5. you may need to format data in TWRP to get it to boot up !
Enjoy your new life !
thanks
dantonuci said:
Here ya go,
1. Download and install minimal fastboot adb
2.Download TWRP rename it Recovery and move it to minimal fastboot adb folder
3. Unlock bootloader, in fastboot enter the following code : fastboot oem nubia_unlock NUBIA_NX595J
4. then also in fastboot: fastboot flash recovery recovery.img
5. you may need to format data in TWRP to get it to boot up !
Enjoy your new life !
Click to expand...
Click to collapse
Hi, I've tried numerous timed and it always won't pick up the command of unlocking bootloader. It always stay in the fastboot menu. I've toggled the 'OEM Unlock' function in the developer setting, as well as the USB debugging. Any idea why the device won't pick up that command?
Is it changing to unlock after you enter the command?
If so flash twrp then boot into recovery ...
dantonuci said:
Is it changing to unlock after you enter the command?
If so flash twrp then boot into recovery ...
Click to expand...
Click to collapse
Nope. It doesn't respond to the command in the fastboot. It just shows the fastboot menu. My adb is written 'waiting for device.... '.
Drivers , uninstall all other drivers and try please
dantonuci said:
Drivers , uninstall all other drivers and try please
Click to expand...
Click to collapse
Okay will try again
storytellerz said:
Okay will try again
Click to expand...
Click to collapse
I am also finding this message, what is its solution ???
the same recovery
dantonuci said:
Here ya go,
1. Download and install minimal fastboot adb
2.Download TWRP rename it Recovery and move it to minimal fastboot adb folder
3. Unlock bootloader, in fastboot enter the following code : fastboot oem nubia_unlock NUBIA_NX595J
4. then also in fastboot: fastboot flash recovery recovery.img
5. you may need to format data in TWRP to get it to boot up !
Enjoy your new life !
Click to expand...
Click to collapse
Hi there, when I flashed the recovery that is always the stock recovery, why?
vins84 said:
Hi there, when I flashed the recovery that is always the stock recovery, why?
Click to expand...
Click to collapse
Not sure what you're asking, did you want to flash TWRP or stock? I was just giving tutorial for how to install TWRP
dantonuci said:
Here ya go,
1. Download and install minimal fastboot adb
2.Download TWRP rename it Recovery and move it to minimal fastboot adb folder
3. Unlock bootloader, in fastboot enter the following code : fastboot oem nubia_unlock NUBIA_NX595J
4. then also in fastboot: fastboot flash recovery recovery.img
5. you may need to format data in TWRP to get it to boot up !
Enjoy your new life !
Click to expand...
Click to collapse
I'm having the problem. Unlock is not sticking to unlock. The unlock works and the flash works but as soon as you try and reboot into recovery it hangs at a blank screen no twrp. Console says waiting for device and stuck. next time I go into bootloader it says locked. The count is 3 for unlock count is there a limit? 7-6-18 Nubia Z17 NX591J WIn 10.
bmaz121 said:
I'm having the problem. Unlock is not sticking to unlock. The unlock works and the flash works but as soon as you try and reboot into recovery it hangs at a blank screen no twrp. Console says waiting for device and stuck. next time I go into bootloader it says locked. The count is 3 for unlock count is there a limit? 7-6-18 Nubia Z17 NX591J WIn 10.
Click to expand...
Click to collapse
Trouble shoot and experiment with the process it will work, even if it appears not locked after reboot
dantonuci said:
Trouble shoot and experiment with the process it will work, even if it appears not locked after reboot
Click to expand...
Click to collapse
I don't understand? Appears not locked? It is locked. Now I remember when I flashed my Star N997 the developer said that there is a unlock bit that has to be turned on in the process of unlocking. I think this may be the case here since it unlocks until a reboot. I am deep concerned that after a unlock count of 3 the phone will not boot anymore. Do you know anything about these things? Another thought is does the USB C need different drivers and should it be plugged into a USB 3.0 outlet?
TWRP will flash only when it's unlocked so even if it's saying it's locked go by what you can do with TWRP
---------- Post added at 12:25 AM ---------- Previous post was at 12:24 AM ----------
I did it several times and never had a problem
i was looking for camera.apk file from Nubia Z17S phone from Stock ROM, can anyone upload it here..it should be located in system / app or app-pvt folder, you can copy using Root Explorer tool.
pls. let me know...
I'm having problems unlocking the bootloader. Has anyone got the proper TWRP for this phone? I can't find it. The one I have says FAILED (remote: Requested download size is more than max allowed). Thanks
hello links no longer works. Someone could give me back the TWRP and minimalb fastboot adb
For anyone's information, TWRP will not boot in recovery while the phone is being charged. Unplug first. You will just get a black screen.
i am also experiencing the same issue.. where can i find the drivers for this phone nx595j? or how do i uninstall the drivers for it?
---------- Post added at 01:21 AM ---------- Previous post was at 01:17 AM ----------
yo can somebody help me install a custom rom on my z17s via team viewer?? im willing to pay for your time
I'm trying to flash TWRP (twrp-3.2.1-0-taido.img) on my Moto E3 Power. I had successfully rooted this phone once, and that's why the phone is unlocked. So when I try to flash custom recovery using the command "sudo fastboot flash recovery twrp-3.2.1-0-taido.img", it says it completed successfully, but instead of booting into twrp, my phone is starting up completely. When I tried booting up custom recovery using "sudo fastboot boot twrp-3.2.1-0-taido.img", the same thing happened again.
The software on my phone is "23.0.XT1706_S151_180706_ROW". So far I've been unable to flash twrp on this phone, but I got it to work an year ago. Please, can anyone help me what's going wrong here? I'm following the tips on xda-forums using which other users were able to flash the same recovery on their phones.
you can try this
ajyotirmay said:
I'm trying to flash TWRP (twrp-3.2.1-0-taido.img) on my Moto E3 Power. I had successfully rooted this phone once, and that's why the phone is unlocked. So when I try to flash custom recovery using the command "sudo fastboot flash recovery twrp-3.2.1-0-taido.img", it says it completed successfully, but instead of booting into twrp, my phone is starting up completely. When I tried booting up custom recovery using "sudo fastboot boot twrp-3.2.1-0-taido.img", the same thing happened again.
The software on my phone is "23.0.XT1706_S151_180706_ROW". So far I've been unable to flash twrp on this phone, but I got it to work an year ago. Please, can anyone help me what's going wrong here? I'm following the tips on xda-forums using which other users were able to flash the same recovery on their phones.
Click to expand...
Click to collapse
Get into the fastboot mode try again unlock your oem
'fastboot oem unlock'(volume up on your phone and select yes ) --->'fastboot format userdata' now flash the twrp recovery the link is below try this it may work worked fine for me and dont know really why the updated twrp is not flashing
My Google Drive link for TWRP recovery:-https://drive.google.com/file/d/0BylQ6RZ2mIP_cElxMzFoRVEyRDg/view?usp=sharing