Hi,
I updated my phone to unofficial cyanogen 13 marshmallow & last arter97 kernel but I'm having some issues with the baseband.
I have E330S Korean galaxy s4 but this version has a lot of differents baseband :
E330SKSUDOK1
E330SKSUDOB3
E330SKSUCNI1
E330SKSUBMK3
... And more or less 10 others
The cyanogen rom provides E330SKSUDOK1 which doesn't works on my phone.
I'd like to find the good baseband number version then I could flash it back with Odin.
I don't want to go back stock just to know what is my real baseband version/number...
Any idea?
Thanks
Sent from my SHV-E330S using XDA-Developers mobile app
bobbymc14 said:
Hi,
I updated my phone to unofficial cyanogen 13 marshmallow & last arter97 kernel but I'm having some issues with the baseband.
I have E330S Korean galaxy s4 but this version has a lot of differents baseband :
E330SKSUDOK1
E330SKSUDOB3
E330SKSUCNI1
E330SKSUBMK3
... And more or less 10 others
The cyanogen rom provides E330SKSUDOK1 which doesn't works on my phone.
I'd like to find the good baseband number version then I could flash it back with Odin.
I don't want to go back stock just to know what is my real baseband version/number...
Any idea?
Thanks
Sent from my SHV-E330S using XDA-Developers mobile app
Click to expand...
Click to collapse
Hello,
It is impossible for a custom ROM to change your baseband.
The only way to change your baseband is by flashing a modem file or a stock firmware with Odin.
The baseband you have now is the baseband your phone came with.
GDReaper said:
Hello,
It is impossible for a custom ROM to change your baseband.
The only way to change your baseband is by flashing a modem file or a stock firmware with Odin.
The baseband you have now is the baseband your phone came with.
Click to expand...
Click to collapse
OK thanks.
I'm using the same kernel in two different ROMs but gsm/3g only works in one of these ROM. (AryaMod V8.3 TW)
What problem could it be if it's not baseband problem ?
Sent from my HTC One_E8 using XDA-Developers mobile app
Just to know :
I'm using foreign sim card with Korean phone on a Korean network and I can't change the CSC via cyanogenmod...
But the Aryamod Rom is more close to stock Rom and has csc system and Korean csc.
I think that's it. Cause I can still do emergency calling on the cyanogenmod Rom.
So... How to change the CSC on cyanogenmod? I don't think it's possible right?
Sent from my SHV-E330S using XDA-Developers mobile app
bobbymc14 said:
OK thanks.
I'm using the same kernel in two different ROMs but gsm/3g only works in one of these ROM. (AryaMod V8.3 TW)
What problem could it be if it's not baseband problem ?
Sent from my HTC One_E8 using XDA-Developers mobile app
Click to expand...
Click to collapse
I did not say it can't be a baseband problem. I only said a custom ROM can't change your baseband, because you thought the CM ROM changed your baseband, or that's how I understood.
Anyway, you can try updating your modem (baseband) and see if it works.
There is no "best" or "right" modem. You have to try and see what works.
But I think the problem is from the kernel.
Try the ROM that does not have GSM/3G with the stock kernel it comes and see if the network works.
OK.
I just flashed the other ROM and it's definitely not a baseband problem, more likely... That *** CSC limitation.
It's very Samsung thing and I don't think there's/found a fix for that for cyanogenmod.
The kernel for cyanogenmod is arter97 11-2 kernel and the kernel for Aryamod is arter97 11-1 kernel,
But camera is working without network on the first one and network is working but not camera on the second one...
Thx for your help
Sent from my HTC One_E8 using XDA-Developers mobile app
Related
I used to dual boot my phone and play with some of the custom samsung based rom and i was on lph baseband version on my primary rom and i installed samsung based custom rom which is based on LQ6 baseband version then after playing with secondary rom i removed it and came back to stock 4.0.4 and i realized my rom baseband version is changed same as secondary...
so if anyone wants to change their baseband version without affecting their data can boot secondary rom with requried baseband version.
Thanks for your time.
There's no trick. Baseband (modem) has absolutely nothing to do with your data. How you managed to get a dual boot working, and yet not know this basic fact is beyond me
Hitesh1802 said:
I used to dual boot my phone and play with some of the custom samsung based rom and i was on lph baseband version on my primary rom and i installed samsung based custom rom which is based on LQ6 baseband version then after playing with secondary rom i removed it and came back to stock 4.0.4 and i realized my rom baseband version is changed same as secondary...
so if anyone wants to change their baseband version without affecting their data can boot secondary rom with requried baseband version.
Thanks for your time.
Click to expand...
Click to collapse
Hitesh1802 said:
I used to dual boot my phone and play with some of the custom samsung based rom and i was on lph baseband version on my primary rom and i installed samsung based custom rom which is based on LQ6 baseband version then after playing with secondary rom i removed it and came back to stock 4.0.4 and i realized my rom baseband version is changed same as secondary...
so if anyone wants to change their baseband version without affecting their data can boot secondary rom with requried baseband version.
Thanks for your time.
Click to expand...
Click to collapse
Changing baseband is as simple as flashing a zip file through CWM recovery.
can u provide me LPH baseband version...flashable through recovery..
Sent from my GT-I9100 using xda app-developers app
Congras you know more than me...
Sent from my GT-I9100 using xda app-developers app
Hitesh1802 said:
can u provide me LPH baseband version...flashable through recovery..
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Here you go. Flash it from CWM. Baseband is independent of ROM. You can flash any baseband on any ROM. Even GB ones on ICS or JB
http://veyka.co.uk/sgs2/radios/I9100_radio_XXLPH_CWM.zip
Sent from my GT-I9100 using xda premium
I recently flashed the temasek and official CM11 roms, but the baseband has been unknown since.
So I had flash back to the original rom that I was using, my QUESTION is that I like cm11 alot, so how can i fix this problem?
Which Note model? -- N9005 or N9005 variant? -
T/w8 ?
Which recovery do you use?
radicalisto said:
Which Note model? -- N9005 or N9005 variant? -
T/w8 ?
Which recovery do you use?
Click to expand...
Click to collapse
It is actually N9006 but temasek's v45 for n9005 and earlier worked fine, I am using CWM rec.
Until recently, temasek's v46 and 47, the baseband becomes unknown
Last time a user had that issue, he fixed it by flashing stock via odin and then CM but he was using a n9005 so I am not sure if that will work for you as well...However no harm in trying.
Sent From My SM-N9005 To All You Wonder Nobodies!!
Khizar said:
Last time a user had that issue, he fixed it by flashing stock via odin and then CM but he was using a n9005 so I am not sure if that will work for you as well...However no harm in trying.
Sent From My SM-N9005 To All You Wonder Nobodies!!
Click to expand...
Click to collapse
I'm sorry but I speak poor English. What is a Stock? I've tried flashing kernel and baseband but it did not work.
When I use Temasek's v45, it shows that my baseband is ML1, but when I use further version, it becomes unknown.
Stock is your original Samsung ROM
Sent from my CM11 Kitkat powered N9005
radicalisto said:
Stock is your original Samsung ROM
Sent from my CM11 Kitkat powered N9005
Click to expand...
Click to collapse
ok i see, i tought it was sth like baseband or kernel or sth else.
I just flashed a n9006 rom made by chinese romers to get my note mp4 into a note3, or i could just use temasek's v45.
I just wanna use the latest cm11 rom but it seems that it's not quite possible for now, so i'll just stick to my original rom...
radicalisto said:
Stock is your original Samsung ROM
Sent from my CM11 Kitkat powered N9005
Click to expand...
Click to collapse
are there kernels and basebands that don't match, i mean they just don't work when put together?
I actually got to a similar problem, after some cyanogenmod update I suddenly got no cellular service at all signal strength stuck on -120db and its stuck on searching for service, flashing older versions, wipes, all did nothing
qlum said:
I actually got to a similar problem, after some cyanogenmod update I suddenly got no cellular service at all signal strength stuck on -120db and its stuck on searching for service, flashing older versions, wipes, all did nothing
Click to expand...
Click to collapse
We have probably same issue
Aditmac1 said:
We have probably same issue
Click to expand...
Click to collapse
I am going to try flashing back to stock tonight, I will report back if it works.
qlum said:
I am going to try flashing back to stock tonight, I will report back if it works.
Click to expand...
Click to collapse
it worked for me though
It also worked for me although sadly I could not use my backup again after flashing back to cyanogenemod so its time to start downloading. At least my phone is fully functional now, even if I lost a bit of data.
I had the same issue move than once, i would lose imei number etc.
Found out that it wasn't prompting for pin unlock on boot.
Since removing this I've had no problems
Yea it also wasn't prompting for ping with mine.
Though starting again fresh does work, I am currently again on the latest nightlies. however if this happens again I will probably wait for a stable release because having to reinstall everything is not really desirable.
qlum said:
Yea it also wasn't prompting for ping with mine.
Though starting again fresh does work, I am currently again on the latest nightlies. however if this happens again I will probably wait for a stable release because having to reinstall everything is not really desirable.
Click to expand...
Click to collapse
it is rather annoying to reinstall everything,even with kies
I didn't even use kies nor any other tool like that.
Hello Everyone,
I recently flashed the KK stock baseband and then flashed the Mahdi rom. However i would like to flash CM11 but i read that CM11 requires a special kind of baseband other than the stock KK one. Is this true ? If it is could someone be kind enough to send me a link of this special baseband ? It's also important to note that i have a JDI Panel if that will make a difference
Amnr123 said:
Hello Everyone,
I recently flashed the KK stock baseband and then flashed the Mahdi rom. However i would like to flash CM11 but i read that CM11 requires a special kind of baseband other than the stock KK one. Is this true ? If it is could someone be kind enough to send me a link of this special baseband ? It's also important to note that i have a JDI Panel if that will make a difference
Click to expand...
Click to collapse
Find the modded baseband here:
http://forum.xda-developers.com/showthread.php?p=51628581
If you have white lines after boot you have to flash the JDI kernel.
Sent from my LG-D802 using XDA
Magic2010 said:
Find the modded baseband here:
http://forum.xda-developers.com/showthread.php?p=51628581
If you have white lines after boot you have to flash the JDI kernel.
Sent from my LG-D802 using XDA
Click to expand...
Click to collapse
Hey,
Any idea where to find the JDI version of this?
Well you have to make some search, I am on vacation and dont have a pc with me.
Sent from my LG-D802 using XDA Free mobile app
Hi guys, I'm new to this forum but have read many things on it and have gotten lots of help, but this question NEEDS a new thread!
I have been using my International Galaxy Note 3 (9005) for about 9 months, I bought it from Kogan in Australia and just recently I decided to root it using CF-Auto Root and then flash X-Note build 18.
A couple of days ago I decided that I didn't like X-Note that much so I tried and flashed Omega Rom. That all worked fine but I didn't really like any of the custom Roms and I just wanted to go back to stock.
So I download (for the first time) the newly released KitKat Australian SM-N9005 Firmware from SamMobile and tried to flash it through Odin straight over Clockwork mod recovery and over the Omega Rom that I currently had installed. When it finished it said that it had failed and something about the Ext4 not being valid, I was shocked (his had never happened to me before with Odin).
I no longer could boot into recovery and the phone said to plug it into Samsung Kies 3 and do an emergency recovery, So i plugged it in and it said that the device was not recognized, and it would not show up in the device list within the emergency recovery window.
So I did a lot of Googleing and came to the conclusion that It was probably the N9005 Australian Rom not being compatible. So after all of these errors and such I booted back into download mode and tried to install one of the other Kitkat Official firmwares that had worked fine before.
It installed just fine and Odin said reset and I unplugged it. but when it booted for the first time I was getting boot loops continually and when and now as I just start to go through the setup process the interface lags and it flashes black a few times and says I have no Sim card in (Which I DO!) and it restarts several times and IS ALL OVER THE PLACE!
It also takes about ten seconds or more after pushing the power button in to get the display to display again and it is unusable and behaving all weird.
The first few times I flash the stock firmware on it through Odin, it remembered my wallpaper, which is really weird seeing I factory reset it!
My best guess is that Flashing it through Odin and and factory reseting it is just not completely clearing it/wiping it and the system is all messed up and stuff is left over.
I don't no WHAT to do!!!! I can't even use it and it's driving me crazy can somebody, please help me!!!!
Thank you!
Look in to omega rom which version of android base it's used, flash same version of stock rom, may not available for Australian but u can flash other countries stock rom, try this & good luck.
Sent from my SM-N9005 using XDA Free mobile app
jdomadia said:
Look in to omega rom which version of android base it's used, flash same version of stock rom, may not available for Australian but u can flash other countries stock rom, try this & good luck.
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
Hi why would I have to flash the same android base as omega and what actually is Android Base?
Also will this fix it and how do I check the android base?
Thanks
If omega rom has higher bootloader version, it will not allow to downgrade if Australia stock firmware version is lower, to find out of version u must look at omega rom u flashed.
Sent from my SM-N9005 using XDA Free mobile app
jdomadia said:
If omega rom has higher bootloader version, it will not allow to downgrade if Australia stock firmware version is lower, to find out of version u must look at omega rom u flashed.
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
Okay, but I was able to flash the Poland Kitkat Rom and another one but I still have the problems above, flashing Roms is not the problem?
Bro poland xeo has still OLD d3 version which release in may, try to flash LATTEST BTU UK ROM
Sent from my SM-N9005 using XDA Free mobile app
Should I try a 'Mega Wipe' to completely format it? - http://forum.xda-developers.com/showthread.php?t=2501577
And I was just reading something about no signal and IMEI, I have no signal and it says no sim card, does that mean I've lost my IMEI forever??
When I was installing x-note I thought EFS backup meant a CMR full backup
As long as I know Dr.ketan tools & utility is for SM-N 900 3g version note3, but u can read more & do it as you want.
Sent from my SM-N9005 using XDA Free mobile app
jdomadia said:
As long as I know Dr.ketan tools & utility is for SM-N 900 3g version note3, but u can read more & do it as you want.
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
Yes the original was, but this script is modified for the n9005 like the guys says in the link.
Will this mega wipe fix my phone??
I don't know about mega wipe, if I will be in your place before making case complicated I would prefer to flash LATTEST STOCK ROM.
Sent from my SM-N9005 using XDA Free mobile app
same problem if you find any solutions plz share
I will reply if I find a solution my friend and Visa Versa if you do too.
PLEASE! other users of XDA can you help me and 'hosamkrm'. I will happily donate some money to the helper and give him a big thanks!
After rom and kernel install (i dont know which one cos i installed many) i lost all the sensors, anyone have an idea to solve this ? Except full system and stock rom recovery
Thanx guys
Sent from my LG-D802 using XDA Premium 4 mobile app
squee9 said:
After rom and kernel install (i dont know which one cos i installed many) i lost all the sensors, anyone have an idea to solve this ? Except full system and stock rom recovery
Thanx guys
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
have you tried flashing a different baseband?
XxZombiePikachu said:
have you tried flashing a different baseband?
Click to expand...
Click to collapse
yes i tried latest kitkat baseband but it didnt work
You can see the rom/kernel name in about settings but so far as i know you probably have to reflash an kernel/rom to fix the sensors or you need to locate the sensor files from the g2 rom you're using and make an flashable zip from it.
same problem,how can i fix it,please help me
Can you guys to do a clean flash and flash KK modem first and then the rom?
Have you tried backing up your current rom, restoring stock rom backup, and restoring the custom rom again? Works for me every time.
Sent from my LG-D800
I tried flashing many custom rom CloudyG3_1.3,CloudyStock_2.5 and stock rom 4.2.2 4.4.2 and flash KK_Baseband_D802 but nothing happened
solved! cant remember exactly but certainly i flashed another baseband and it solved my problem
haha169 said:
I tried flashing many custom rom CloudyG3_1.3,CloudyStock_2.5 and stock rom 4.2.2 4.4.2 and flash KK_Baseband_D802 but nothing happened
Click to expand...
Click to collapse
Hello,
Try this BaseBand : https://drive.google.com/open?id=0B3k06KRLerMUTmRUVFp2cjI4RnM&authuser=0