Related
Hi All,
I am new to the forum. I have owned a PDA phone for about a month, a Verizon (HTC/Apache/UT Starcomm/Audiovox) XV6700. It was rebadged so many times, I have no idea who really made it.
I read about A2DP Bluetooth technology. I also read reviews of several headsets before purchasing the Motorola HT820 headset.
I loaded up a two-gigabyte mini-SD card with mp3 files, popped it in, paired the headset to the phone and engaged Windows Media Player.
Unfortunately, the sound quality is horrible. It sounds as if I am listening to music played over the phone, as if I am on hold with some customer service call center. I know the headphones are capable of much more because they come with a stereo mini-plug cable. When I plug them into the audio output on my laptop, the headphones come alive with decent sound quality.
I did not modify my registry or add .cab or .dll files. When I paired the headset with the XV 6700, I just checked the "hands free," "wireless stereo," and "headset" options.
Am I missing something or is this the sound quality I can expect from this technology?
Dave
San Diego, CA
Make sure you have the new ROM update for the Verizon VX, and install the Tornado cabs and dll files.
A2dp on xv6700
I have updated my rom, made the Tornado changes, made other reg changes as described in this and related forums - all to no avail. Stereo Sound is constantly clipping. Phone sound is ok.
What else can I try
Feel free to email me direct.
You may want to try another player, like pocket player. Or try another BT stereo headset. If that dosn't work you may want to try getting your device swapped out with a new one. I can't get it to work on my PPC6700, but am waiting for a fix of the EVDO/ring through problem with newer units before I try to swap mine out.
xv6700 a2DP lag
I have already tried the pocket player - no difference. I am also on my second headphone set (albeit from the same vendor).
Unfortunately Verizon will not swap out because an unsupported feature does not work. At least that is what they told me.
Don't worry you are not the only one that can't get it to work.
The bluetooth on the 6700 is not very good, so YMMV when it comes to A2DP. It is a unsupported feature, you may need to convince them the BT is bad, but don't mention the A2DP.
I am waiting for a fix of the EV-DO ring through problem on the shipped PPC6700 with the new ROM before I have Sprint look at mine.
XV6700 A2DP lag problem.
Unfortunately without A2DP "enabled", the bluetooth connection seems to work just fine.
BTW: What is the EV-DO ring through problem?
http://forum.xda-developers.com/viewtopic.php?t=58050
It dosn't apply to Verizon VX6700, just the Sprint PPC6700.
Low sound quality with 6700 and Moto HT820 headset / A2DP
I am new to posting, be kind please. I have spent a lot of time and research on this problem and I am having some luck and some other problems that there may be some great info on. I do have the latest firmware from UTStarcom (Verizon model) which has AKU 2.0 update. I did install the tornado A2DP I found here and it did not work at first until I found the additional Tor_A2DP_cert.cab file and installed it. It works and seems to be stable, including headset operations. The only problem is sound quality. There is a ringing like high pitched digital noise, my experience in electronics would have me thinking of a bandwidth limitation, or timing issue that would be a result of process priority or something, just guessing! I have the Plantronics 590a stereo headset that sounds great when using the BT with my laptop, so I beleive it is with the phone. The big question, has anyone tried changing the registry settings concerning bluetooth? I see some entries here: HKEY_LOCAL_MACHINE\Services\BTAGSVC and HKEY_LOCAL_MACHINE\Services\BTHIDSVC don't know what they are or what they would do, not brave enough to change them.
try this link
http://forum.xda-developers.com/viewtopic.php?t=54621&highlight=a2dp
have the same problem
i have the same prob. i asked searched nothing could fix it yet nice phone sound just sucks
I am new to the forum. I have owned a PDA phone for about a month, a Verizon (HTC/Apache/UT Starcomm/Audiovox) XV6700. It was rebadged so many times, I have no idea who really made it.
I read about A2DP Bluetooth technology. I also read reviews of several headsets before purchasing the Motorola HT820 headset.
I loaded up a two-gigabyte mini-SD card with mp3 files, popped it in, paired the headset to the phone and engaged Windows Media Player.
Unfortunately, the sound quality is horrible. It sounds as if I am listening to music played over the phone, as if I am on hold with some customer service call center. I know the headphones are capable of much more because they come with a stereo mini-plug cable. When I plug them into the audio output on my laptop, the headphones come alive with decent sound quality.
I did not modify my registry or add .cab or .dll files. When I paired the headset with the XV 6700, I just checked the "hands free," "wireless stereo," and "headset" options.
Am I missing something or is this the sound quality I can expect from this technology?
Dave
San Diego, CA[/QUOTE]
I have two BT Stereo headset, 2 different A2DP devices, BT laptop, and a BT dongle and get different results with different combinations.
- Southwing SA505 Bluetooth Stereo Headset (works great with everything, questionable manufacture quality, broke after 3 months of use)
- Moto HT820 Bluetooth Stereo Headset (good quality, but BT functions & sound is problematic)
- Cing 8125 (running Faria Crossbow WM6)
- LG enV VX9900 (vanilla os)
I believe it is just a simple case of both Bluetooth software of your device and headset not getting along together.
The SA505 works perfectly and sound quality is awesome with all A2DP & BT remote devices (including both devices, BT laptop, and a cheap generic usb BT dongle installed on my desktop)
The Motorola HT820 on the other hand is quirky...
Paired to the 8125 - when listening to music, sound breaks briefly (for 0.5 - 1.5 secs) randomly every 30-60 secs. Everything else is fine including sound quality.
Paired to the vx9900 - it unpairs when getting a incoming call & I have to manually pair it back up. Everything else works fine including outgoing calls. Good sound.
Paired to laptop or BT dongle - works perfectly.
in short the only thing that could be done is on the handset side by changing the BT stack or rom.
hope this helps.
Just try MSI Blue Player, this is the only PLAYER which post a high quality sound to my bluetooth ear piece.
VX6700 and Bluetooth
Just as a friendly note, I had the Verizon VX6700 until last week. I had tried numerous bluetooth headsets with it and all seemed sub-par or totally unacceptable. The last one I tried was the Southwing SA505 and was, to say the least, displeased with the sound quality. I shelved all my bluetooth headphones and continued using the Motorola H700 earpiece for phone use only even though it was hard to hear in noisy environments, but was the lesser of all evils. Last week, I was available for upgrade from Verizon and got the LG Chocolate, took it home and put some music on it and used the plug in style headphones for the first day. After getting sore ears from the round-stuff-them-in-your-ear-hole type headphones, I decided to try the Bluetooth headphones again for the mere humor of having spent over $200 on the lot of them. The Southwing SA505 sounded phenomenal on the Chocolate. I then tried talking to my wife driving down the road with the windows rolled down and going 65 MPH, which had always been a problem before. She actually sounded like she was right next to me in crystal clear stereo (which if you have been married 21 years as I have, then you understand what a scary thought that is). I don't think the problem you are having is the headset but rather the phone and unfortunately I have no answer how to fix it, but hopefully have steered you in the right direction of where the problem lies. Good luck to you.
All,
I thought I would start a thread where people can post what headsets they have and/or are using with the Kaiser. That way, if people want to buy a headset to use with the Kaiser they can know ahead of time whether or not it will work. I love this device, but right now I am not very pleased with my headset. Respond and I will try to keep it up to date!!
1. (Me) Plantronics 665 - Previously a very good headset. Now with Kaiser, not very good quality. Barely functional with lots of static.
2. Moto H700 - Seems to be good. (x2)
3. Moto HT820 - Stereo Headphones, but good.
4. Plantronics 310 - No report.
I'm using the Motorola H700 and it works fine.
spartanrob said:
I'm using the Motorola H700 and it works fine.
Click to expand...
Click to collapse
I am using the HT700 for standard driving. But I also use the Motorola HT820, BT stereo headphones, and they work as well. Music plays from the phone, and if a phone call comes in, Microsoft Voice Command annouces the caller. I can then press the call phone, the music pauses, I take the call. When the call is over, the music resumes where it left off.
i have a set of the ht820 but I feel like a retard with em on cause they are huge, anyone tried those new slim ones they sell at the ATT store?
jallenclark said:
i have a set of the ht820 but I feel like a retard with em on cause they are huge, anyone tried those new slim ones they sell at the ATT store?
Click to expand...
Click to collapse
Then call the Olympics, cause I feel special
For me it’s a Plantronics 310 right now, but I'm looking to upgrade. I will likely stick with one of their products too, as I’ve processed around a quarter million inbound via their wired sets at work.
There was mention of a pretty cool Jawbone modification by AVERYSOUND in an earlier thread. It’s pricy however but worth looking at. It appears to address complaints I’ve heard about the earpiece not being a factor.
Update: I found Discovery 510 (Plantronics) that I had misplaced some time back. Well I charged it up and paired to the Kaiser earlier today. What a bummer. The sound quality is ok, but the volume is just too low, even at the max setting. It’s also bit more cumbersome to slip on in a pinch (like while driving). Bottom line is the 310 sounds much better to me from a volume standpoint.
Fwiw…
Bump
Wanted to bump this post back up.
jspohn said:
Then call the Olympics, cause I feel special
Click to expand...
Click to collapse
me too, doesn't stop me from wearing them
the new ones do look a whole lot cooler, I didn't care so much but with as sleek as the tilt looks my headphones should match
The Blueant Z9 works very well. I like how voice command is announced through the headset.
Jabra JX10
I have the JX10. It was a dream with my 8525 it sounded and worked great.
caveat: in general it is a very delicate and breakable headset -- I have had two of them and done numerous repairs to keep them from falling apart - I have cannibalized the first to keep the second one going - but what the hell, I love that little head set with my 8525.
BUT
It is an unusable pig connected to the Tilt.
It pairs ok, but when you activate voice command or try to answer a call it activates the phone but will not transfer sound (or mic) to the ear piece. Sometimes after a short time the JX10 beeps and then you can hit the connect button again and it will transfer the sound. If you place a call it will not play the ring signal into the ear piece or the handset and it will only allow you to connect sound (signaling you with a couple of beeps) to hear the call until after the called party has answered.
Maddening!
I've actually struggle to answer or make a call using it and finally got the sound through only to hear my friends on the other side yelling "HELLO?! - HELLO! - YOUR PHONE SUCKS!"
it's embarrassing.
Don't even get me started about how bad it sounds on the Tilt.
I'm tempted to go back to the Hermes, but I love my new Tilt...
I need a high quality compatible headset...
The Samsung WEP200 works very well with the Tilt.
im using the plantronics 590 and it works LIKE A CHARM!
there's a thread on this over in accessories btw. I'm moving this thread there as well. Let me know if you want me to merge the two.
Motorola S9 works very well. Much better than with WM6 on Hermes.
I still need to verify my Sony Erickson DS970 Lanyard Wireless Stereo Headset..
Jawbone
I purcahsed the jawbone with military sound dampening....its pretty cool. I use it alot and it sounds GREAT!
Now I am alos looking at the Mototola s9, as I want to be able to listen to music. Let me know if anyone has robb with the S9. for the reviews on the Motorola S9 seem 50/50.
Jasperkins said:
I purcahsed the jawbone with military sound dampening....its pretty cool. I use it alot and it sounds GREAT!
Now I am alos looking at the Mototola s9, as I want to be able to listen to music. Let me know if anyone has robb with the S9. for the reviews on the Motorola S9 seem 50/50.
Click to expand...
Click to collapse
I have been using mine for about 2 months and so FAR really good with the ATT Stock ROM. On the Hermes with WM6 cooked ROM's I experienced strange issues like music resuming after a call (even though the music was paused BEFORE the call came in). Since getting away from the cooked Hermes ROM's (no offense to anyone at all), the performance has been SOLID. I am very Happy...
L8
Jabra BT8010 Convertible (single/stereo) headset
Well, since I figured I was going to be really stepping into the 21st century by getting my Tilt, I determined to jump into it with both feet ! Hence this headset.
I did alot of research on the BT headset (like I did on the Kaiser/Tilt itself), and I knew pretty much what I wanted to do -- and this Jabra BT8010 convertible (mono/stereo) headset totally fit the bill. I planned on answering calls as normal, but I listen to alot of music, too, and wanted just one thing to carry around. If you haven't seen one of these headsets online, it's about the only one I'm aware of that "converts" -- that is, it has a main unit, and the "second half", or "satellite" that makes the stereo part of the equation optionally plugs into and tethers to the main part when you want to listen to music, too. The whole thing is quite small and svelte -- though ever so slightly "cyborg" (you'd have to see it worn).
The function of this headset has been flawless so far, and the sound quality is just mind-blowing (yeah, it's that good). Volume won't get quite as head-bangingly loud as I might like, but the overall fidelity and usable flexibility of this combo just puts it head over shoulders above anything else I've tested out.
A little pricey, but they are just really good.
I use the stereo headset Jabra BT620s with the Kaiser. It works very well both for music and for the phone, even in noisy environments
The old school Motorola HS850 works fine from my experience. I also own a Jawbone, which sounds tinny when compared to the HS850.
species8472_rules said:
I have been using mine for about 2 months and so FAR really good with the ATT Stock ROM. On the Hermes with WM6 cooked ROM's I experienced strange issues like music resuming after a call (even though the music was paused BEFORE the call came in). Since getting away from the cooked Hermes ROM's (no offense to anyone at all), the performance has been SOLID. I am very Happy...
L8
Click to expand...
Click to collapse
Motorola S9 for me too
though I could never paired it to a 2nd device SIMULTANEOUSLY though ... any advice ??
I followed the instructions to a T ... yet, it always paired to the last one ... I thought this is capable of upto 9 devices in list ... and they said it's capabled of simultaneous pairing ???
summary:
/ paired to phone.
/ turn off phone and attempt to paired to 2nd device ( desktop stereo ... desktop PC ..etc..etc
/ even went as far as "unticked" the "use as stereo headset" withing the bluetooth setting on phone !! only ticked as " use as handsfree " ... tried both ways too.
it always connect only the the last paired device.
now ... if I'd only paired to the phone ... it works as advertised in terms of listening to music and calls come in get interupted to answer the call & back to music when call ended.
but I can't use it as just handsfree on the phone and listen to music from another device ( bluetooth home entertainment ... desktop bluetooth PC...etc )
pairing to any device(s) individually works fine ... just not simultaneously though
any advice ???
(Update: 2/23/10: To replicate the problem, use a bluetooth headset, make a call, then walk away from the phone until you're almost out of range. That's exactly the problem I have when I'm holding the device, it doesn't matter where I am distance wise, the best audio call quality I get STARTS where most phones get when you're too far from the device. Ideas?)
After weeks (3 straight) of searching, I have to finally ask.
Does anyone else have an issue with the quality of their bluetooth connection (calls only) regardless of brand and distance from the phone?
I've purchased nearly 13 different bluetooth devices trying to fix this. Changing the distance from the actual handset (experimenting if there's a different to if the Hero is plugged in or not), the price of the bluetooth unit, what type it was (speaker phone unit only, carkit, headphones, ad2p or not, etc etc), and I still have a poor call quality call.
Reception isn't an issue, I've tried from full bars to almost no bars, and in every instance, when I disconnected the bluetooth and went back to using either speakerphone, headphones, or directly on the device, the noise went away.
You can only hear the noise when the remote party speaks, and it really sounds like the old analog bag phones in bad reception. Is there anything as far as changing settings on the bluetooth to improve the audio quality?
not really. the BT module sends information to the receiver and the receiver decodes that into audio. so you cant really set an EQ for BT with android at least so it basically depends on the receiving unit. while music is playing turn the volume down to 75% on the phone and thats the best quality you will get. im an audiophile and it works for me.
I have a Plantonics Stereo BT.
It works great on my Hero... Much better than my HTC Diamond!
Haven't had any trouble from my Jawbone 1. The sound quality isn't as good as it was on my TP, TP2 or Pre but it's ok. Haven't had any weird noises. But it does randomly disconnect from my Hero. Well the phone says it is still connected but I get no call notifications through it and when I answer, the audio is through the handset. Even right after I finish talking to someone through the BT. Gonna have to chalk it up to the Hero cause I've had no issuse with it on any other phones. Best BT ever in my opinion.
Yeah, I don't know. I have used the Jawbone II, Jawbone Prime, Moto H12, Moto H790, and Plantronics Voyager Pro all with no problems in sound quality, also audio quality is very important to me because I do have some hearing loss. My call quality with the Hero isn't quite as good as with my old Blackberry Curve, but it is still very functional as I use it at least an hour everyday. If you have gone through that many headsets it is quite possibly the device itself.
I don't know, I have 3 Hero's and I honestly don't like the quality of sound on any of them. One of them is just straight stock. I just wish I could get it with a clear quality as my old dumbphones have. I think I've been helped to discover the answer to my question, thank you all!
I just assumed that I could use any bluetooth microphone for voip, voice recording etc. I currently do not have any bluetooth device but I tried 3 at a friends and they all paired for sound, but failed to work in using a voice recording app or a voip app. In a voip app the sound went strange (long sounds on the dial tone buttons) and then the sound resumed coming out of the tablet even though the headset device was showing as connected. Only a reboot solved this.
So I assume the bluetooth stack doesn't support recording, but why not? Isn't this a basic thing at this point? If I connect a bluetooth headset with mic that should be my input and output on sound for the time it is connected.
Or has anyone had success with a certain bluetooth model for recording?
No one can provide info on this? Is this the norm for tablets? I would assume even some ancient gingerbread phone would work with bluetooth headset/mic.
Does cyanogen team ever modify the kernel to include more functionality such as this?
I'd check other bluetooth threads around this section, but I've heard several people who've used bluetooth headsets with Nexus tablets. It may be a setting issue (particularly the device setting under bluetooth and the app settings concerning headsets).
-Ara
My Motorola HS850 works perfectly with the N7.
Sent from my Nexus 7 using Tapatalk 2
ExploreMN said:
My Motorola HS850 works perfectly with the N7.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Same here, Plantronics bluetooth headset works perfectly for voip calls using Talkatone.
Thanks for the info. I don't have the model names off-hand but I'll ask my friend what they were. I wasn't aware that once a bluetooth device was paried that there were any additional options. I was under the impression that it was simply pair and use. With the case of a headset/mic I assumed it was inherited as your sound output/input for all apps while paired. The voip I tried is csipsimple and a voice recording app. I'm glad to at least some models work but I hope it isn't hit and miss and you have to be selective of what bluetooth device you use but rather something I was doing.
I didn't expect there to be any settings as well because even with no bluetooth recording device paired, I don't see anywhere in the settings recording recording (like mic volume).
Can't get mine to work. Single ear set I don't even get sound. Just dead air all around. The Southwing SA505 stereo gets sound fine but no mic function and on Groove ip no sound or mic on single ear or stereo. I even checked the settings making sure bluetooth was selected.
I'm from Canada so I can't try talkatone as I can't get google voice. I now purchased a btheadset. It pairs fine and I hear audio in all apps but I haven't found one app yet that works with the bluetooth mic. I wanted a voip sip app. I've pretty much tried all the free ones and other users have posted comments of bluetooth issues as well. There are a couple of paid sip apps that claim to support bluetooth, but I don't want to buy them to only find they don't.
So yes, android supports bluetooth mics, my thread title is inaccurate, but it seems the vast majority of recording apps do not have proper bluetooth support. Can someone name any app besides talkatone, even a voice recorder that works with bluetooth so I can just test it?
I'm actually surprised it's this bad. Bluetooth audio isn't that cutting edge. It should pair and now act as your soundcard so to speak. I initially thought to blame the OS because I thought any app that requests to play a sound or record a sound, would be re-directed by the OS to now use the bluetooth device.
I'm pretty sure it works exactly like this on windows. Or for example, I have a usb headset on my pc. It shows up as a soundcard. I make it the default and every app now uses that. No developer had to code to use a usb headset/mic, it just works.
Again a little disappointed that it's been a little trying just to get a bluetooth headset to function properly. I tried 3 at my friends that all pair fine and work flawlessly on his playbook in all his apps, and now I bought 1 so it's hard to say all of these bluetooth headsets have quirks and don't work properly with android.
Still trying to get this working. It pairs fine, and shows in the bluetooth details as being connected with phone audio and media audio.
It's a Aluratek ABH01F which I've read great things about. It supports a2dp. I'm not too familiar with bluetooth and microphones so I'm not sure if there is anything else to check for android to support a bluetooth microphone.
I don't know why I didn't think of it before but I tried google's voice search and it doesn't work either. I can hear the audio fine, just no mic.
Can anyone confirm if google's voice search works with their bluetooth mic? You probably have to walk out of the room to verify it's not the units mic that is picking it up obviously.
I'm not convinced bluethooth mics work at all on the nexus 7. I could chalk it up to my headset just doesn't place nice with the nexus 7 but again I tried 3 bluetooth devices at my friends. I found this post on another site:
Well, I got around to testing a bluetooth headset. single earpiece, Avantalk AH28. Not the best, but it works fine with a phone. Paired with the tablet fine. I dialed on groove ip - dial tones came from the tablet, the ringing transferred to the earpiece, when phone was answered there was no sound transmission at all- not from the bluetooth earpiece, or from the tablet. Just dead air. Tried it twice.
2nd test- google music played from tablet- not into the earpiece.
I have a stereo bluetooth headset with mic that I can test with but will have to charge that one up first. Will get back to you.
************************************************** ****
Got to my stereo Southwing SA505 bluetooth test. It worked to play music from tablet beautifully. Did not work with groove IP- went in and made sure settings were set for bluetooth- Mic did not work.
Click to expand...
Click to collapse
http://www.nexustablets.net/forum/nexus-tablet-audio/985-does-headset-jack-have-microphone-capability.html
Again, I hear audio fine via bluetooth, so I wonder if some of you were thinking the bluetooth mic was working but it was actually the unit's mic.
This app called tapemachine specifically states it has bluetooth support. It fails for me when I change it to bluetooth in the settings, can someone else try it?
https://play.google.com/store/apps/details?id=com.samalyse.free.tapemachine&feature=nav_result#?t=W251bGwsMSwxLDMsImNvbS5zYW1hbHlzZS5mcmVlLnRhcGVtYWNoaW5lIl0.
So I'm starting to think my thread title is correct. If I am, I'm hoping there is a way to hack some file changing the available audio profiles. I've read others doing something similar with different devices when the manufacturer disable those audio profiles. I would find it doubtful that google/asus would do this though.
Anyway, if anyone can try that app, or confirm that say grooveip is using the bluetooth mic and not the device. An easy test is tap on the unit mic while recording and see if you or the person you are talking to hears that.
No one? I know a couple of you said it worked, but are you sure grooveip is actually recording via the mic? I can hear phone calls using various sip apps with bluetooth, but I know the mic isn't recording. One of the headsets my friend has is a Motorola MOTOROKR S9 Stereo Bluetooth Headphones. Link here: http://www.amazon.com/Motorola-S9-Bluetooth-Headphones-Packaging/dp/B0017KTOJK.
I've only tried stereo headsets, so maybe that is the issue. The Motorola HS850 is a single ear piece, I'm not sure what plantronics set you have.
I'd really appreciate if someone else can verify if bluetooth is working. If bluetooth recording in fact works with the nexus 7, I must be really unlucky with 4 headsets that don't, which I find highly unlikely or nexus 7 has poor bluetooth support. The only thing left is my bluetooth hardware is broken which I find even more unlikely. Aradreamer, you say you've seen several posts saying bluetooth works, but I haven't found one post explicitly stating bluetooth recording works. I found more post on other forums clearly stating it doesn't work.
sark666 said:
I'd really appreciate if someone else can verify if bluetooth is working. If bluetooth recording in fact works with the nexus 7, I must be really unlucky with 4 headsets that don't, which I find highly unlikely or nexus 7 has poor bluetooth support. The only thing left is my bluetooth hardware is broken which I find even more unlikely. Aradreamer, you say you've seen several posts saying bluetooth works, but I haven't found one post explicitly stating bluetooth recording works. I found more post on other forums clearly stating it doesn't work.
Click to expand...
Click to collapse
odd odd ...
first off i have the Nexus 7 16g with it rooted.
heres what i did first i bought the samsung HM1200 didnt thoroughly test that 1 because i figured it just wouldnt work with the device ( or was broken ) once i started to get all this screeching out of it... i heard sound momentarily then all it did was the screeching at different levels. returned it yesterday. then i added a couple more bucks ( about $27 total ) and got the plantronics M20 took it home and crossed my fingers. got it all it paired up and what not and ended up with the same condition except now the mic is working perfectly. i tested this thoroughly now over and over inside and outside and also away from the N7 to be sure the mic is working. this is great BUT i cannot hear any sound at all coming in to the N7 except the same screeching at constantly varying levels. this is with both grooveip and talkatone. i also tried uninstalling beats audio and rebooting but i read somewhere this wont change the drivers back to the originals and i still have the same condition. i just got the N7 about 3 weeks ago and the store where i bought it has a price guarantee so i am today planning to return it and get the N7 again but this time the 32g version. ( they got 2 left so i will be going ASAP. ) so almost all the work i put into setting this thing up is about to be wasted. still i am going to do it anyways. to me its just the point of getting the best i can with my available budget/resources and i can easily see this thing be full and kicking myself in the butt for not doing it. this time around i will test all of what i mentioned here BEFORE i root it. in fact i will only install the necessary apps ( grooveip/talkatone etc.. ) during testing. its a real pain in the butt but it is a MUST i have this thing working as a phone with BT asap. thanks for the input and i will report back later.
update: actually in a more quiet room i was able to hear myself on the BT headset but very very low and in the background behind the screeching. still will report back later with the new unit.
For some reason the Bluetooth headset profile on the n7 is totally broken. I tried MANY headsets and none of them work. It is either the drivers, the hardware or the kernel. I hope it fixable in the 3g version.
Sent from my Nexus 7 using xda premium
yep i am sitting here now with the 32g N7 and the first thing i did was try the BT unrooted and its the exact same thing screeching like mad can hear myself on the mic perfect from the other phone and can hear the other phone low in the background of the screeching on the N7 ugh
i have a temporary solution that should work till its sorted.... i need a new headset for my computer anyways so ill just make sure to grab one that is USB then when my OTG cable arrives i am pretty sure that should work. it will be corded but at least i can use the phone somewhat normally for free. ill let you know. now im off to rebuild the whole thing back to where i had it in the 16.
zip1212 said:
yep i am sitting here now with the 32g N7 and the first thing i did was try the BT unrooted and its the exact same thing screeching like mad can hear myself on the mic perfect from the other phone and can hear the other phone low in the background of the screeching on the N7 ugh
Click to expand...
Click to collapse
Bummer. Hopefully they fix it with 4.2 or with the 3G version.
It also seems that if you try to toggle speakerphone / BT headset in various voip apps the tablet will crash and restart.
I tried with GrooveIP, Talkatone and the build in phone app (After changing the framework-res.apk file).
I also noticed i had better luck getting the BT headset to fully (and randomly) work when doing outgoing calls. It never worked on incoming calls.
Any progress on this?
I've noticed the same problem and just returned a BT headset due to the problems in GrooveIP & Talkatone
As a side note I was able to get the BT headset to work as a MIC with the google voice commands by using the following..
- Soundabout
- Under BT settings set it to force mono BT mic
- Set audio to wired headset
Just as ref, I'm using my N7 in my car, so my setup may be a bit different.
But this worked, I was able to tell my N7 commands and it would read out the response over my car speakers.
Anyone had success with a USB mic? Curious if that will work.
I'm very interested in this thread too.
I have a 32GB nexus 7, rooted and unlocked. I have a Platronics M100 bluetooth earpiece. My goal is to be able to dictate to Evernote through the BT earpiece. It is pairing and under the connect settings it is showing up as "phone audio". But when I speak into it nothing is happening in Evernote. I also do not get media audio through the earpiece.
My Sony xperia Z accepts audio from bluetooth microphones, but only during a phone call.
When the call is terminated the paired bluetooth mic becomes inactive and the phones built in microphone takes over. I have tried many apps but none will accept audio from a BT mic.
I have tried a number of headsets and speakerphones and they all behave in the same way. Sound is not a problem as the BT speaker simply replaces the phones internal one when paired.
The xperia Z has a setting which claims to: " record audio through bluetooth headset if available", but this setting does nothing. I keep retrying the setting at every android update, to no avail. Currently at 4.2.2.
When I plug in a wired headset, the speaker and mic simply replace the ones in the phone. Why doesn't bluetooth behave in the same way?
This issue has been raised in many forums, in relation to many android devices, but never answered.
This is a general appeal for ideas, but mostly directed at Havoc [Havoc-OS v2.8 2019-09-09] users - I need your help. I've searched high and low for a solution and at this point I need someone else using Havoc to confirm something for me. The issue is phone call audio routing when headphones or 3.5mm audio cable is plugged in. On my old S2 for many years when I was driving I'd connect an audio cable to the 3.5mm jack and it would send audio (music, audiobooks, podcasts etc) to my car stereo. Then if I made or received a phone call, the audio from the other party would also come through the car stereo and the phone mic would easily pick up my voice a metre or so away, just like it would on speakerphone mode for a regular call.
Now I have an issue with the Note 4 where all regular audio out, music etc, will go to the car stereo but for some reason it isn't routing phone call audio to the car stereo OR the phone's external speaker. They can hear me fine from the Note 4 mic but I hear nothing. In addition, the call recording reveals that their voice IS being recorded along with mine....but there's no way for me to hear them.
I have tested this at home as well with regular wired headphones (not the handsfree type designed for phones with a mic on the cable), just plain old headphones I use to listen to stuff at the PC. The same thing happens: music and other normal audio goes to headphones but I cannot hear any audio in a call.
This is weird and I can't figure it out. My old S2 did this effortlessly for many years through multiple different ROMs and still does it now running Nougat. In my searches I came across what appears to be a solution, one of the only apps of it's kind for many years called SoundAbout, but it crashes straight away on my phone, and I read the same complaint from several users on Oreo onwards. The app seems to have been abandoned by it's dev years ago.
I've looked everywhere in Havoc settings and I can't find anything obvious that addresses the issue so I'm turning it over to you smart people. Any ideas? Before you say something like "just use a bluetooth headset in the car" - No. I'm not looking to change anything, I just want this (very simple) thing to work as it has for years, since Gingerbread! Btw, I only discovered this today for the first time as I'd never tried it before so I have no idea if it would have worked on earlier versions of Havoc or any of the Oreo ROMs I ran.
Thanks guys.
TLDR - [Havoc-OS v2.8 2019-09-09] phone call audio not routing to car stereo via 3.5mm jack, all other audio goes out just fine.