mobile is in recovery mode but kies doesn't support it for recovery i was installing lollipop xxu in my device while the error occurred please suggest a solution
Download firmware.
Install drivers and ODIN.
Home and Volume Down for download mode.
Then attach phone to computer and flash firmware with ODIN.
u0aol said:
Download firmware.
Install drivers and ODIN.
Home and Volume Down for download mode.
Then attach phone to computer and flash firmware with ODIN.
Click to expand...
Click to collapse
i was installing the firmware when it happened
BALAJ said:
i was installing the firmware when it happened
Click to expand...
Click to collapse
You were installing rom via Odin? What error messages did Odin throw up in the output box?
Related
Hi, i'm new here and i need help urgent. I want to root my Samsung Galaxy S4 GT-I9505 Orange (Romania). I do this with Odin 3.09 and i do something wrong because i forgot to intall Kies and driver and now i can't recover it. When i want to recover with Odin just give me a FAIL and i don't know how to recover perfectly with Odin and with Kies don't appear when i click recovery in Tools and he says i don't have firmware updates.
Please i need to recover my phone if someone can say step-by-step to recover it, please, help me. Thanks
NeverDieRo said:
Hi, i'm new here and i need help urgent. I want to root my Samsung Galaxy S4 GT-I9505 Orange (Romania). I do this with Odin 3.09 and i do something wrong because i forgot to intall Kies and driver and now i can't recover it. When i want to recover with Odin just give me a FAIL and i don't know how to recover perfectly with Odin and with Kies don't appear when i click recovery in Tools and he says i don't have firmware updates.
Please i need to recover my phone if someone can say step-by-step to recover it, please, help me. Thanks
Click to expand...
Click to collapse
1. Install Kies and Drivers
2. Unistall Kies, leaving Drivers
3. Install Odin3 V1.85
4. Go to Sammobile.com and download LATEST 4.4.2 firmware package in .Tar format for your country
5. Boot phone into download mode (Volume down + Power)
6. Open Odin
7. Connect phone via USB
8. Load firmware in PDA section of Odin
9. Click START
10. Wait till you see a green PASS appear in Odin.
11. Dance around the room in a joyous jig, whilst waving your arms in the air and screaming "yay, I fixed my phone"
Hello,
I'm new here
My problem started when my CSC got stuck on SEE after trying to go back to stock rom from XEO ROM. My original CSC is XEH. I tried to use KIES to restore it, it flashed to the newest but my CSC hasnt changed. After that I downloaded ROM from a different regoin marked as XSG and I tried to flash it with ODIN but it failed and now I'm stuck with "Firmware upgrade encountered an issue.." screen. All roms are Official. My download mode shows Secure Download: Enabled. Did I brick my phone?
Sorry for my not so perfect english
My mode is N910C with Exynos
TrueMorph said:
Hello,
I'm new here
My problem started when my CSC got stuck on SEE after trying to go back to stock rom from XEO ROM. My original CSC is XEH. I tried to use KIES to restore it, it flashed to the newest but my CSC hasnt changed. After that I downloaded ROM from a different regoin marked as XSG and I tried to flash it with ODIN but it failed and now I'm stuck with "Firmware upgrade encountered an issue.." screen. All roms are Official. My download mode shows Secure Download: Enabled. Did I brick my phone?
Sorry for my not so perfect english
Click to expand...
Click to collapse
did you put your phone in Download mode? did you unzipped the file to get the odin flashable file? go to download mode by pressing and holding volume down+home+power for 3 seconds and then let them go, if phone boots into download mode then its not bricked, you just have to download the file and unzipped, to get the Odin file, then open odin, with the phone on download mode, then click pda, search the unzipped file, and flash it, cheers
yoniinfante said:
did you put your phone in Download mode? did you unzipped the file to get the odin flashable file? go to download mode by pressing and holding volume down+home+power for 3 seconds and then let them go, if phone boots into download mode then its not bricked, you just have to download the file and unzipped, to get the Odin file, then open odin, with the phone on download mode, then click pda, search the unzipped file, and flash it, cheers
Click to expand...
Click to collapse
Yes I did all that and everytime I try to flash my phone I get "FAIL" at the end and the same screen at boot.
TrueMorph said:
Yes I did all that and everytime I try to flash my phone I get "FAIL" at the end and the same screen at boot.
Click to expand...
Click to collapse
whem u connect the phone to the computer and open odin does the :COM square becomes light blue? if not then something is wrong with the connection, cheers:fingers-crossed:
Due to a wrong firmware flash on my GT-I9505 LTE my fhone is stuck on the Kies recovery screen(yellow triangel with two screens) I can get into download mode but Odin dont see the phone because USB debugging is off.
When i connect to KIES and choose initialize and firmware upgrade and y type in Model: GT-I9505 +the correct S/N i get the error : CAN'T INITIALIZE.
Someone who has a solution on this?
If you can enter in recovery you can try to flash firmware from adb sideload.
If you have the Philz Touch recovery the command is this: "apply update from adb"
If you want help with adb answer this tread and ask me
[QRCODE][/QRCODE]
BigD10 said:
If you can enter in recovery you can try to flash firmware from adb sideload.
If you have the Philz Touch recovery the command is this: "apply update from adb"
If you want help with adb answer this tread and ask me
Click to expand...
Click to collapse
Thanks,but can not enter recovery.
Odin recognized the phone on a Win7 notebook. Now downloading firmware from Sammobile for flashing with Odin.
I think it should be solved after that.
Usb debugging is unrelated to download mode.
Hello everyone,
I have a N9005 that only goes into download mode. It doesn't go into recovery mode. When I try to put it in recovery mode, just vibrates, the screen is black and continues to restart itself, vibrating.
If I try to turn it on normaly, Samsung Galaxy Note 3 N9005 logo comes on, stayes like this for 30, seconds, restarts, vibrates twice and keeps on doing this on and on
If I take it to download mode and try to flash a new rom, Odin tells me that there is no PIT partition. I even added the PIT file, but the same, no luck
When I try to flash a rom, on the download mode screen give me different red messages
UDC START-red color
MMC reading error
I even tryed to do emergency recovery with keys, but no luck as well
Any advice?
Regards!
Install Firmware from Sammobile...
albrecht1977 said:
Install Firmware from Sammobile...
Click to expand...
Click to collapse
I will let you know how it works/if it works
You cannot install roms via download mode .
Only official firmware.
If you have flashed official firmware via Odin then try flashing TWRP recovery via Odin .
Are you flashing the correct firmware as a TAR file ??
MMC reading error is probable damaged Nand .
Posted reported to mods for moving to correct Q&A section .
JJEgan said:
You cannot install roms via download mode .
Only official firmware.
If you have flashed official firmware via Odin then try flashing TWRP recovery via Odin .
Are you flashing the correct firmware as a TAR file ??
MMC reading error is probable damaged Nand .
Posted reported to mods for moving to correct Q&A section .
Click to expand...
Click to collapse
Yes, I am flashing the correct firmware from sammobile.
It is tar.md5
Now the phone shows me ODIN: flash read failure.
What can I do in this situation? If it is as you wrote, damaged Nand?
JJEgan said:
You cannot install roms via download mode .
Only official firmware.
If you have flashed official firmware via Odin then try flashing TWRP recovery via Odin .
Are you flashing the correct firmware as a TAR file ??
MMC reading error is probable damaged Nand .
Posted reported to mods for moving to correct Q&A section .
Click to expand...
Click to collapse
When I try to flaah the TWRP recovery, "there is no PIT partition"
Find 4 part firmware and flash correct PIT file /
Suggest a search on NAND fail / Nand Write fail on XDA .
JJEgan said:
Find 4 part firmware and flash correct PIT file /
Suggest a search on NAND fail / Nand Write fail on XDA .
Click to expand...
Click to collapse
Do you have any ideea where I can find the 4 part firmware?
Thanks
Sammobile /updato/samsung -updates. Alldot comms
Search this forum search google.
Have you tried using different USB cables and USB ports?
Odin will sometimes give the "PIT" error when you don't use an OEM cable.
audit13 said:
Have you tried using different USB cables and USB ports?
Odin will sometimes give the "PIT" error when you don't use an OEM cable.
Click to expand...
Click to collapse
Hey guys. Did anyone ever find the solution for this? I have the exact same problem like as in literally exactly. And I've tried the 4part repair firmware, with the pit, as wel as the combination firmware as well as the stock firmware and even tried cf auto root, boot images, twrp flashes.. Nothing! Just also keeps giving the pit error.
Reads as NAND fail , if you have followed all the advice .
Hi, my j500m is bricked because Install the firmware combination to eliminate the frp of the device at the end of the procedure, I proceeded to install the rom stock, in the middle of the installation (partition system) it is hung I left it for a long time and the same, and it happened to me with all the rom stock that download, in the end I searched and decided to install the rom with 4 recovery files and the pit file (BL, AP, CP, CSC and PIT file) when starting odin generated an error in the pit file the phone instead of now restarting in download mode as before I did it, now turn on and go directly into recovery, the computer does not recognize it in any way now and I cannot recover how it would solve this problem
kiomet said:
Hi, my j500m is bricked because Install the firmware combination to eliminate the frp of the device at the end of the procedure, I proceeded to install the rom stock, in the middle of the installation (partition system) it is hung I left it for a long time and the same, and it happened to me with all the rom stock that download, in the end I searched and decided to install the rom with 4 recovery files and the pit file (BL, AP, CP, CSC and PIT file) when starting odin generated an error in the pit file the phone instead of now restarting in download mode as before I did it, now turn on and go directly into recovery, the computer does not recognize it in any way now and I cannot recover how it would solve this problem
Click to expand...
Click to collapse
Doe's your phone go into download mode, if yes try to uninstall Samsung drivers and install them again and try again with another USB cable
Mscreams said:
Doe's your phone go into download mode, if yes try to uninstall Samsung drivers and install them again and try again with another USB cable
Click to expand...
Click to collapse
the drivers is not problem and i use 3 USB
kiomet said:
the drivers is not problem and i use 3 USB
Click to expand...
Click to collapse
Try to use 2 USB