Hi Everyone,
My tablet is Lenovo B8080-F model, 16GB with Wifi. I got it rooted and installed TWRP on it. I was so over excited about this and wanted to flash custom ROMs on it. I searched and could not get the proper ROM for the B8080-F, in my eagerness, I decided to flash the ROM for Lenovo A3000. Since then my tablet could not boot up again. It got stuck at the Lenovo logo. My windows system can still detect the tablet when plugged to the PC, but ADB DEVICES command shows nothing.
I need help. I need step-by-step guides on how to revive the tablet. I appreciate.
Muyiwa.
Update:
My PC can detect the device. It is shown as Android ADB Interface under Windows Device Manager. There is no COM Port.
If I type: adb devices
Response: ? Unauthorized.
Please help!
Thanks.
Muyiwa.
Ouch
Me too, i need help
I actually have such an tablet lying around. Haven't been used in five years. Never got custom ROMs, right? I don't think Lenovo ever bothered to upgrade from Kitkat.
@[email protected]
@Mirage20000C
Related
Hello,
I bought my wife one of these tablets for her birthday. It was running great, decided to root it so that I can uninstall the bloatware that was eating this tablet up after using it for a week. Uninstalled all the happy lenovo stock softs, everything is all good... Well I decided to put JB on this tablet after root stock rom was running great. I made a backup, but somehow I completely crashed the file system, and I can get into recovery VOL+ VOL- POWER, while usb plugged in. I had a hell of a time getting drivers install in windows, and also debian. Drivers are like NOT installing properly, or it will install properly in windows, then I have an error on another device etc. I cannot get past the lenovo splash screen that does nothing, and the only way I can get adb devices to recognize the device, is when it is in splash screen mode on lenovo, but NO other adb commands will work! adb shell will simply freeze terminal or dos. It will not read micro SD card when I boot recovery, linux or windows has no idea how to even read my device when I plug it in while in recovery, im about to buy her a new one. I have googled and googled for days and hours for a fix on this. If you need detail, please ask, and I will gladly give you info. Please help, my wife is super pissed.
Thanks!!!
hey have you managed to solve this problem? I think I have the same issue as you. my tablet just doesn't want to boot normally even after reloading roms.
Hello,
I had installed the Franco Kernel on my N4 some months back. I recently got the 5.0 Lollipop OTA update but i could not install it. I read somewhere that i needed to install the stock kernel to get Lollipop installed. So i got the factory image of 5.0 for N4 from google and manually tried to flash with some Kernel flasher app i dont recall the name. THAT WAS THE WORST DECISION I EVER TOOK.
Now my phone is stuck in fastboot mode. I can go to recovery and all. Whwn i try to start up my phone i can only see a black screen.. i downloaded adb but the problem is I HAD NOT TURNED ON USB DEBUGGING. I searched the net for a week,asked my friends who all said that i should throw away my old( i dont consider it old) phone and get a new one. I have come here with a lot of hope. I bought the N4 so as to use it for atleast another year .
Adb doesnt recognize my phone. Pc says "Android Device". Please help me. Im saving for getting my sister a laptop and i just cant afford another decent reliable phone.
You do not need USB debugging for fastboot mode. when cionnected is should say android device and some serial number.
USB debug mode is when the android OS is running not fastboot mode
if it does not when connected at the prompt type fastboot devices
follow the install instructions here and it should get you device back. (in the commands remember to replace the file names with the lollipop names)
http://forum.xda-developers.com/nexus-4/general/how-to-how-to-flash-factory-image-t2010312
I have brought back at least 10 devices from my own doing and from people that screw up their phone and not know what they are doing.
Good luck
Ok i will follow it. I currently have the 4.2.2 image file. Yes in fastboot mode PC recognizes it as Android Device. Lets hope i can do it I dont need USB debugging right ?:silly:
I dont know how i should thank you and this forum. I love you guys, you helped me when i had lost all hopes of getting my phone back i love you guys <333333333333333333333333333333333333333333333333333333333333333333
Glad it worked. Just spread the love on the forums.
I learned by reading here and glad to help others.
good day to alli was looking for an active thread for this kind of tablet but they are all alreay un updated since the unit is already old
i need help with my table due to an issue
i was accidentally wipe the os on my lenovo
so it end bootloop
also the problem is this
when i try to flash the unit using spflashtools
the unit cant detect on the computer
everytime i put on my pc
the computer say unkwon on the device
i already installed the driver directly on the unit
run the autoinstalled driver for my unit
so i was hopping if there is anyone can share a back up file via recovery on your device so that i can install a firmware via twrp i really appreciate your help. i can use my tablet plss i really need help regarding with this
i tried every thread and i searched in google, but nothing helps me.... both windows 10 and linux mint aren't working in fastboot or in adb with this device... help???
even changing the adb_usb.ini file doesn't work!!! i also bought a new type c cable...
Same here. I can get the ZUK to boot into fastboot mode but when I enter "fastboot devices" in ADB it doesn't show the device. Very frustrating.
does rooting void warranty in zuk z1?
And what if i root my zuk z1, will i get further software updates for cyanogen or android, whatevers running?
Lend some advice to this noob developers
Message pls.
I finally got it to work!
edulus91 said:
i tried every thread and i searched in google, but nothing helps me.... both windows 10 and linux mint aren't working in fastboot or in adb with this device... help???
even changing the adb_usb.ini file doesn't work!!! i also bought a new type c cable...
Click to expand...
Click to collapse
I managed to finally get it to work with Win 10 using the drivers from here http://forum.xda-developers.com/zuk-z1/help/files-zuk-z1-drivers-qpst-roms-twrp-t3221629 I'm not sure if was just these drivers that solved it because I had an absolute bear of a day trying to get it to work and some odd stuff happened. But I just know it worked shortly after installing them. Now I'm very pleased with NuleaRom installed
Hi guys. As the title says I have a T-mobile Oneplus 6T running Android 11 and I think it is bricked. It is SIM unlocked and bootloader-unlocked as well. The problem started when I tried to flash TWRP and the phone continuously went to a Qualcomm CrashingDump state. Now I've tried several tutorials online but all of them point to the 10.3.8 instead of the 11 that the phone has and using the MSM Tool comes back as The image does not match the device. To make things worst following one of the videos I updated the Qualcomm drivers via WIndows Update and now my PC will not recognize the phone (USB not recognized by Windows error). Please I need the community's help on this one. Thank you soo much in advance.