Im trying to flash I have followed, I have the canadian variant of the S7 edge.
I keep getting <ID:0/007> Complete(Write) operation failed.
I've tried different ports, windows 7, run as admin, starting again with closing odin etc..
Enabled OEM unlock from dev menu
I did notice that the phone says FRP lock on.
These are the guides.
https://www.youtube.com/watch?v=nlj76YvxGYo
http://galaxys7root.com/galaxy-s7-s7-edge-root/how-to-root-galaxy-s7-s7-edge/
What do i do
Related
Im trying to flash stock firmware because I'm wanting to start fresh a bit of the software altering when haywire. Now though I keep getting errors such as this in Odin: <ID:0/004> Complete(Write) operation failed or auth fail. Ive attempted installing a stock nandroid back up but its not allowing that either, it gets stuck at the boot screen and wont continue on.
THANKS IN ADVANCE I REALLY NEED THE HELP
Hi,
I need some assistance. I have an S4 (SC-04E) and it has TWRP custom recovery loaded in it. My colleague accidentally clicked wipe system from TWRP and it wasn't able to boot at all. So I thought I'd flash the stock firmware in order to resolve the problem. However, when I flash stock firmware on ODIN, it fails and gives me an error:
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> aboot.mbn
<ID:0/012> NAND Write Start!!
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
How do I resolve this? The original firmware was 5.0.1 and I tried flashing both 4.4.4 as well as 5.0.1, but both have failed. I googled the error and I was unable to get relevant results. I downloaded the stock firmware from sammobile. Any idea what I can do for this issue?
Your phone doesn't boot because your friend wiped the Operating System from it. The recovery should boot and flashing any custom ROM through it should make it work again.
Regarding your Odin problem, make sure you have done the following:
Used a different USB cable
Used a different USB port
Used a different Odin version
Tried another Windows
Tried a completely different PC.
All of the above can affect the outcome of flashing with Odin.
I don't know if I made a minor mistake or a major mistake. I was trying to flash U Firmware and downloaded and tried to flash G935UUEU2APEH_CL8086184_QB9638174_REV02_user_low_ship_MULTI_CERT. I can't tell you for sure what it said because the post I was reading said if it fails, it's no big deal, try again a few times. After a few failed attempts, I realized there were tons of different versions.
I finally downloaded what I believe is the the correct one, G935VVRU4API3_CL8875708_QB11198937_REV02_user_low_ship_MULTI_CERT, but when I went to flash it, in red at the top it says
volume size is too big 1152000 < 1369600
Odin : invalid ext4 image
and in Odin, the end says
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there any fixing this or am I royally screwed? When I restart the phone, a blue screen comes up and says
Software Update Failed
Your device didn't update successfully. Use the Verizon Software Repair Assistant on a computer to repair your device and complete the update. (I don't have a Verizon Software Repair Assistant).
I'll be honest, at this point I just want a functioning phone! haha Thanks for your help!
re: messed up phone
bmccartney2004 said:
I don't know if I made a minor mistake or a major mistake. I was trying to flash U Firmware and downloaded and tried to flash G935UUEU2APEH_CL8086184_QB9638174_REV02_user_low_ship_MULTI_CERT. I can't tell you for sure what it said because the post I was reading said if it fails, it's no big deal, try again a few times. After a few failed attempts, I realized there were tons of different versions.
I finally downloaded what I believe is the the correct one, G935VVRU4API3_CL8875708_QB11198937_REV02_user_low_ship_MULTI_CERT, but when I went to flash it, in red at the top it says
volume size is too big 1152000 < 1369600
Odin : invalid ext4 image
and in Odin, the end says
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there any fixing this or am I royally screwed? When I restart the phone, a blue screen comes up and says
Software Update Failed
Your device didn't update successfully. Use the Verizon Software Repair Assistant on a computer to repair your device and complete the update. (I don't have a Verizon Software Repair Assistant).
I'll be honest, at this point I just want a functioning phone! haha Thanks for your help!
Click to expand...
Click to collapse
You need to use Odin3 to flash the proper official samsung
firmware for your s7 or s7 edge phone model.
You can find and download the firmware from http://sammobile.com
After successfully flashing the phone using Odin3 your phone will be
just like new.
The mistake you made is a very small one, flashing the official firmware
takes less than 15 minutes.
Good luck, have a great day!
.
This happened to me on my galaxy tab s2, same error in Odin and same result. Good news is it is fixable. I have no idea why the error happened, I just tried a different firmware, and the second one worked.
Having an issue with trying to downgrade from 7.1 -> 7.0 on G935A Att. Odin is up to date 3.12
I got firmware for my phone G935A, G935AUCS4BQC2. Matches my phones base band. My phone is Frp unlocked, oem debugged.
I keep getting fail messages on odin in about every form
<ID:0/005> Complete(Write) operation failed. My last attempt
<ID:0/005> FAIL! Model dismatch fail. The one before.
Am I just missing somthing simple here?
Almboss said:
Having an issue with trying to downgrade from 7.1 -> 7.0 on G935A Att. Odin is up to date 3.12
I got firmware for my phone G935A, G935AUCS4BQC2. Matches my phones base band. My phone is Frp unlocked, oem debugged.
I keep getting fail messages on odin in about every form
<ID:0/005> Complete(Write) operation failed. My last attempt
<ID:0/005> FAIL! Model dismatch fail. The one before.
Am I just missing somthing simple here?
Click to expand...
Click to collapse
have u tried using modded odin?
I have been using a "patched" Odin 3.12 that I found on here for att phones.
Hi,
I tried to root the phone according to these instructions. For some reason Magisk will not install (every time I had a different error in TWRP, as could bnot mount data or preload etc.)
I formated and fixed both partitions (I didn't re-partition), but still no sucess.
I wanted to flash cf-root image but Odin is stuck and doens't even start.
My model is SM-G950FD.
OEM unlocking and USB debugging were both enabled.
Now when I try to turn the phone on I get the message: "Only official released binaries are allowed to be flashed", and I can't even get to TWRP.
Odin gets stuck at "SetupConnection" or at "boot.img.lz4"
I tried Odin v.3.12.7 and 3.13.1
I tried several USBs on my PC (even though smart switch app communicated with the phone with no problem in any USB port)
I tried a couple of stock ROMs from sammobile for my device, I tried flashing only AP, or the entire ROM.
If I try to reflash TWRP I get the following in Odin:
Code:
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 37 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> RQT_CLOSE !!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
And on the phone, in the download mode screen I receive the message "Only official released binaries are allowed to be flashed"
All help will be appreciated.
Thanks
Have you unlocked the bootloader from download mode? OEM unlock technically doesn't unlock the BL. It just allows to be unlocked. If in dl mode the OEM Lock is set to "ON", your bootloader is still locked, and you need to unlock it.
By unlocking the bootloader you will:
- LOSE YOUR DATA (Take a backup if you have anything important)
- VOID YOUR WARRANTY
ChocolateAdventurouz said:
Have you unlocked the bootloader from download mode? OEM unlock technically doesn't unlock the BL. It just allows to be unlocked. If in dl mode the OEM Lock is set to "ON", your bootloader is still locked, and you need to unlock it.
By unlocking the bootloader you will:
- LOSE YOUR DATA (Take a backup if you have anything important)
- VOID YOUR WARRANTY
Click to expand...
Click to collapse
In the steps to root the device (link in th OP) there is no such instruction, only enable OEM unlock in the developer options.\
Since I managed to flash TWRP at first I assume the bootloader is unlocked.
Is there a way to unlock it in the download mode screen (I can't boot to system nor TWRP)
Reinstalling Samsung drivers (even though the installer said it is already installed) fixed the problem - Odin works!