Related
Hi Guys.
As the title suggests root access suddenly disappeared from my nexus 6p yesterday.
DigitalHigh rom 7.0 was flashed through the latest twrp (3.0.2-2) and everything was running fine. I got the notification that the SU binary is out of date from PHH's SuperUser. Opened it but nothing really happened. So I downloaded superSU and suddenly it prompted me that the device isn't rooted. Being unfamiliar with PHH's SU I decided to flash the latest SuperSu through TWRP but the phone wouldn't boot.
Right now it has been restored to a backup taken just before flashing SuperSU which means everything is running fine and even android pay works however there's no root access. Is there something specific that might have caused this?
Are there any ways to re-gain root?
Haven't gone through the process of a clean flash yet as the phone is needed for work however even if all of that is done the SU binary will still need to be updated. Is there a different method for updating PHH's root?
So far I have tried clearing cache etc. but noting worked.
apostol96t said:
Are there any ways to re-gain root?
Click to expand...
Click to collapse
Phhusson's superuser and SuperSU don't mix. If you're back to booted, but not rooted with Phh, you'll need to either flash one of the Nougat boot images from the nexus/angler folder or the latest superuser.zip (I think the latest is r229) from http://superuser.phh.me
Has anyone been able to get magisk to work appropriately? I attempted and the magisk apk kept fc'ing. I read about LG devices needing a boot.img "bump". Is this true or has anyone got it working in their own way?
There Is no root method for variants that don't have a unlocked bootloader. You would know this if you read the forums before asking
Sent from my VS995 using Tapatalk
mrtruckincowboy said:
There Is no root method for variants that don't have a unlocked bootloader. You would know this if you read the forums before asking
Click to expand...
Click to collapse
So, quite frankly, if you read, another user has it working. Further more, with the TMO variant, I do have an unlocked bootloader. Root application works with magisk, however the APK itself fc's.
I thought cowboys were polite ; )
I misread your post thought you were the typical person asking for a update on root I apologize.
Sent from my VS995 using Tapatalk
Thats what you get for not reading posts Cowboy... Smh...
I have the H918/tmo and I was able to get magisk running with phh's superuser. I'm kinda iffy on magisk-hide, as i had issues with it initially ( random reboots with it enabled). I turned off magisk hide for about a week, then turned it back on last night with no reboots since.. but haven't tested it with apps.
After running the easy recowvery + root script, i got rid of SuperSU. I believe all i did was a Full Unroot in the options, with no changes to the recovery. (I also may have done a format /data when rebooting to recovery again, but i dont recall fully, so take that into consideration if it didnt work at first (followed by the no-verity-opt-encrypt zip).)
After getting rid of SuperSU/su binary, what i remember doing was:
1 ) Flash magisk v9.zip -> reboot to system to make sure it boots, then adb reboot recovery.
2 ) Flash phh's superuser r266-2.zip -> reboot to system
3 ) install magisk manager via apk, and phh's superuser via playstore.
4 ) test out root.
has anyone been able to get Phh's superuser to work on the Sprint v20 / LS997 ?? If so, how? Thanks in advance.
If you can't get this working there is an app called RootSwitch. It can successfully hide root on the V20 with a toggle.
HiddenKnight said:
Has anyone been able to get magisk to work appropriately? I attempted and the magisk apk kept fc'ing. I read about LG devices needing a boot.img "bump". Is this true or has anyone got it working in their own way?
Click to expand...
Click to collapse
ive got 1 working and 1 in testing that uses magisk and phh.
the phh superuser seems to be casusing the systemui to force close often when in hide mode and the random reboots and loss of service, otherwise it was working fine.
but yeah, just flash version 10.2 on your current rom and see what happens!
btw this was on DEC sec patch, on oct builds i never tried it, but this is latest DEC sofware, didnt even use rootswitch
slayerh4x said:
If you can't get this working there is an app called RootSwitch. It can successfully hide root on the V20 with a toggle.
Click to expand...
Click to collapse
Is this the App you used?
https://forum.xda-developers.com/android/apps-games/play-pokemon-root-switch-method-patched-t3483179
remix435 said:
Is this the App you used?
https://forum.xda-developers.com/android/apps-games/play-pokemon-root-switch-method-patched-t3483179
Click to expand...
Click to collapse
I am using the one from this rom thread;
https://forum.xda-developers.com/v20/development/h819-nrd90m-modded-stock-rom-t3503658
Just follow the directions in the OP and you'll be g2g.
slayerh4x said:
If you can't get this working there is an app called RootSwitch. It can successfully hide root on the V20 with a toggle.
Click to expand...
Click to collapse
Tried RootSwitch w/ SuperSU. Didn't pass SafetyNet if that's what you were referring to.
Tried it again last night. Had the 1st 3 options turned on. Soon as I opened Android Pay my phone hot booted and got stuck on the VZW splash screen. Had to pull the battery. Won't try that again with supersu.
I have a VS995 this is how I got my phone to finally take magisk and pass the safetynet check. I'm running software version VS99513A I performed dirty santa to get unlocked bootloader and root access. Now I tried to uninstall supersu threw the app and I got a failed message. I tried going into recovery and flashing the supersu unistaller and that would fail. I tried flash magisk v12.0 and keep getting error message. I got stock in twrp recovery several times and used LGUP and flash either VS99512A KDZ or the VS99513A KDZ. Am not a developer but it seemed as if the boot.img won't take by the magisk zip. Those where my failed attempts for about a week or two. Now on to the success story
Performed Dirty Santa on software version VS99513A. I decide to flash modstock kernaI update v1.1 because it seem to work well with a stock rooted VS995. I flashed busy box in recovery and downloaded the app and also downloaded quick reboot so I could reboot into recovery easier. After reading @poixninja thread on modstock kernal - stocked with goodies he mention flash a boot.img that was patched with magisk. So I but the phone into fastboot mode and flashed his boot.img onto the phone with cmd (command prompt). I think I might have tried to uninstall supersu threw the app and I think it didn't work after flash the boot.img. So I put the phone into recovery mode the to wipe and then to advance wipe and clear dalvik and cache. After that I went to install and flashed the supersu unistaller and it took. After flashing I wipe the cache that twrp ask after most flashes. I then rebooted into recovery to make sure my twrp was not affected because I had and issue with that in previous supersu unistaller attempts. Rebooted ito twrp recovery then rebooted into system. I think whenever I flashed the verzion logo stayed up longer than normal but the phone fully started up. I clicked on supersu and it said no root access. Turned of the phone and did the steps to get to recovery mode. Once in I first wiped dalvik and cache. Then I flashed magisk unistaller and it went threw with no issue. I wiped dalvik and cache then rebooted into recovery. After getting into recovery I rebooted to system.
Sidenote: I recommend after wiping supersu and flashing magisk unistaller. Once you boot up install magisk apk. I didn't install the apk until after I flashed the magisk v12.0 in recovery. I noticed when I reboot the magisk icon was on the phone but when I clicked it it said go to playstore to download. I had the magisk manager apk on my SD card so I just installed it. The install to longer than normal I think it was because I didn't install it prior to flash the zip in recovery. I didn't get a chance to verify it yet.
Once the phone boot and I installed the magisk app manager I open it up and got green checks for installed magisk v12 and properly rooted. I went to setting and turned on enable busy box, magisk hide, and systemless. But when I clicked safetynet I got cts mismatch. Did some research and read on other XDA magisk thread that it maybe because of custom roms, modified kernals and possible supersu somewhere on the system. The only root accessible apps I had installed during this process was busybox and quick reboot. I did notice the first time I ran quick reboot after getting magisk it did give it root access then it did after I opened it again.
I decide to uninstall quick reboot and busy box. I uninstalled both apps. I rebooted into recovery mode the manual way. First thing I did was wipe dalvik and cache. Then I flashed busy box uninstaller. When the flash was running I say in the command lines that it found supersu. Which I thought was odd so I also flashed supersu unistaller. I rebooted into recovery wipe dalvik and cache and flashed uninstall magisk. Then reboot into recovery. I ran busy box uninstaller one more time to see if it would pick up supersu again and the command lines did not mention it. I flashed back magisk v12.0 rebooted into recovery. Then rebooted into system
Opened magisk went to setting to turn on enable busy box, magisk hide and systemless. Check safetnet and failed I found a magisk XDA thread that talks about common issue. It said I had to check magisk core only mode. Once I did that he requested a reboot which I did. Once back up I first cleared in app manager under show system I cleared all data for google play store, google play service for instant app, google play services. I opened magisk clicked safetynet check and I passed it. I went to search for netflix in play store and it pop up I installed it and it working fine so far. I tried logging into snapchat and I got threw.
Hope this maybe help full to anyone having issues
https://forum.xda-developers.com/v20/development/kernel-modstock-kernel-stock-goodies-t3563887 (boot img and modstock v1.1)
https://forum.xda-developers.com/showpost.php?p=71154562&postcount=4 (Magisk common issues)
Easier than that...?
sentra10550 said:
I have a VS995 this is how I got my phone to finally take magisk and pass the safetynet check. I'm running software version VS99513A I performed dirty santa to get unlocked bootloader and root access...
...
...Hope this maybe help full to anyone having issues
Click to expand...
Click to collapse
If I may be so bold, I played around with the rooting process on mine (I have a VS995 on 13A, too), and found a much easier (and possibly cleaner?) way to do this. Of course, the way I'm about to suggest would require a full KDZ to stock and a factory reset...
Here's mine:
Follow this thread:
https://forum.xda-developers.com/v20/how-to/lgv20-vs995-verizon-aio-post-06-19-2017-t3624326
Note: For noobs: After step 13, it's a bit misleading, because it doesn't boot DIRECTLY into TWRP, but boots to the white-screen "stock" recovery. The trick is to tell it "Yes" to both reset prompts. (It doesn't actually reset your stuff.) After this, it will take you to the TWRP menu.
When you get to step 14E, DO NOT FLASH SuperSU!
Instead, flash the ReStock zip.
After flashing ReStock, follow step 14G, and then flash Magisk 13.3 (latest stable, haven't tested others) from here:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
I tried this out of order a couple of other times and ended up either having Magisk not following through with install, or developing issues installing certain apps. (Either getting a -504 error from Play Store, or having valid APKs reply that they were "corrupt" when directly installing.)
Of course, all of the stereotypical disclaimers apply-- YMMV, and I'm not responsible if you brick your device, yadda yadda...
No offense, intended, sentra10550. While I'm glad you managed to get things working, the directions were a bit convoluted and I hope my humble findings might help yourself, in the future(?), and any others that may have a VS995.
Good luck, everybody!
)O( NeoHiPPy )O(
Think I'll wait until an easier method comes out for the VS995 to run Magisk lol..
I was UNABLE to do full unroot on my V20 from SuperSu settings menu. It would say "uninstallation failed"
I tried running UPDATE-unSU.zip from TWRP and it did not help. Magisk keeps on complaining about modified boot file.
I am unlocking boot loader, trying to flash Magisk in TWRP instead of SuperSu as per DirtyStanta root method instructions.
I will also flash restock 1.3 right after to stop static and vibration issue.
If it works, ill update my post.
---------- Post added 21st February 2018 at 12:28 AM ---------- Previous post was 20th February 2018 at 11:48 PM ----------
Ok i got it working. It was easier then i thought it would be.
These are the steps i did the very first time i got into TWRP after bootloaded unlock process as per DirtySanta rooting instructions.
Entered TWRP
DID NOT format data>yes
Installed Restock1.3 and Magisk.zip
Wipe cache and dalvik. Says Failed to wipe Dalvik (dont know why but what ever)
Reboot.
Result: Asking for unlock password 9 attempts left. So i have to Format Data>Yes
Re-entered TWRP
Format Data>yes
Reboot.
Root works. No SuperSu needed.
Conclusion:
You have to format DATA not for the root to work, but to be able to get into the phone. If there was a way to bypass that, there would be no need to factory reset to root. Root method would not require you to wipe the phone.
How ever, some apps that i use still do not support systemless root. They fail to do their work such as removing system apps. I cant remove any of my system apps for some reasons. I get "failed" messageevery time.
I was told i need modules for Magisk, but i have yet understood what that even means.
Other apps that use root, work fine. Such as AdAway.org
Hello forum,
Is it truly possible to root the xt1563 running 6.0.1? I've followed multiple sties with instrutions and when I can easily get past unlocking the bootloader, installing twrp but when I go to install the supersu from twrp, I go into a boot loop.
Can someone here say that they've successfully rooted their xt1563 running 6.0.1? If so, where did you get your files?
Thanks!
I rooted my XT1603 on 6.0.1 successfully. I used twrp-lux-3.0.2-r3.img and flashed supersu 2.46, got a bootloop. I reflashed supersu 2.62-3, still got a bootloop. Then I reflashed supersu 2.65 and it worked. Thanks to this post:
http://forum.xda-developers.com/mot...oto-x-play-t3211941/post68057600#post68057600
chinhodado said:
I rooted my XT1603 on 6.0.1 successfully. I used twrp-lux-3.0.2-r3.img and flashed supersu 2.46, got a bootloop. I reflashed supersu 2.62-3, still got a bootloop. Then I reflashed supersu 2.65 and it worked. Thanks to this post:
http://forum.xda-developers.com/mot...oto-x-play-t3211941/post68057600#post68057600
Click to expand...
Click to collapse
thanks chinhodado. I will try to flash with 2.65. Do you know where I can find the same file you used?
Here: https://download.chainfire.eu/921/SuperSU
Didn't work. I first tried 2.65 then it froze on load-up. I left it for about 3 minutes, then rebooted in recovery. Tried 2.62 same thing. I left it load this time for 7 minutes. Stuck on motorola planet picture.
I honestly don't know what it takes to root this device. oneclickroot.com offer rooting for 39.95 which I think is silly. Somehow they seem confident that they are able to sell a "root" package.
I remain confused and frustrated.
thanks for trying to help chinhodado
Did you try wiping the cache? I think I had to do that several times too.
chinhodado said:
Did you try wiping the cache? I think I had to do that several times too.
Click to expand...
Click to collapse
yeah that and davlik
only systemless method work on moto x play whether its XT1562 / 1563
Go to terminal in TWRP - Advanced-Terminal type command in your phone
Code: echo SYSTEMLESS=true>>/data/.supersu
http://forum.xda-developers.com/moto-x-play/general/how-to-root-moto-x-play-xt1562-running-t3509344
I did not have to enter any command when I rooted my phone and it still succeeded in the end. I think 2.62-3 uses systemless root by default. It doesn't hurt to try though.
I am getting the same problem on XT1562, it stucks on Bootloader warning, tried everything above and available elsewhere. Help!
so i recently got the pixel, had the moto x for about a year and decided to see what was going on with the rooting scene with this device. turns out that someone came along and created a simple solution to rooting and installing twrp for this device. I was happy. TWRP works just fine. But upon flashing SuperSU and rebooting from that i'm now stuck on the M logo permanently it seems. Yes i can reboot back into recovery and fastboot mode. But i can't seem to get past the M logo and all i've done was flash TWRP and SuperSU any idea about what's going on?
You need to flash as systemless root. Recent versions of SuperSU installs it as system root by default on this phone for some reason.
The SuperSU zip from my thread does it: https://forum.xda-developers.com/mo...t/rom-marshmallow-6-0-september-2016-t3536120
Spasticdroid said:
You need to flash as systemless root. Recent versions of SuperSU installs it as system root by default on this phone for some reason.
The SuperSU zip from my thread does it: https://forum.xda-developers.com/mo...t/rom-marshmallow-6-0-september-2016-t3536120
Click to expand...
Click to collapse
awesome thanks!!!! <3 now i just need to find a rom to play around with :3
silvernirvash said:
awesome thanks!!!! <3 now i just need to find a rom to play around with :3
Click to expand...
Click to collapse
No offense, but why are you bothering to root if you are just going to flash a ROM?
Also, there is nothing wrong with the latest version of SuperSU, you just need to do a manual systemless flash by creating the file /data/.supersu with the contents "SYSTEMLESS=true" and it will work perfectly.
acejavelin said:
Also, there is nothing wrong with the latest version of SuperSU, you just need to do a manual systemless flash by creating the file /data/.supersu with the contents "SYSTEMLESS=true" and it will work perfectly.
Click to expand...
Click to collapse
That's exactly what my zip does. I've only put it together to make the process much simpler, and I love automating stuff when it's possible.
SuperSU inside is unmodified. Updater-script copies a file named "systemless" from the zip which has "SYSTEMLESS=true" in it to /data, renames it to ".supersu", then proceeds flashing SuperSU.
Hello all,
I need some help!I have a Moto X Pure Edition XT 1575 I just unlocked bootloader and then intalled TWRP 3.1.1 and then installed SuperSU 2.79 and now no Sim is detected. What did I do wrong?
Thanks!
Unroot & clean with supersu app. It should restore boot image.
/You can also restore boot, system, wipe data in twrp/
Reboot & check.
If ok try rooting with supersu 2.82 or magisk 14. @kaleend101
Hey, today Supersu wanted to update from the play store so i updated it, and once it was done it asked to restart the phone like usual, i restarted and when it was done booting supersu said the phone was no longer rooted. Not exactly sure what to do to fix this, i am on the unlocked V20 (US996) i am not running any rom, just stock and root. Hopefully you guys can help me get root back on my phone, thank you.
If you have TWRP installed , try to flash a supersu zip file for the update or one from a rom in the development thread . I just updated myself but didn't reboot yet.
I think the Playstore update screws it up.
You need to search the update .zip and flash it in recovery.
SuperSU 2.80 and 2.81 are both broken. Flash 2.79 SR3 in TWRP and root will be back. Worked for me anyway.
P.S. Don't re-update through the Play Store until they fix the issue, just stay with 2.79 SR3 for now.
Bubba Fett said:
If you have TWRP installed , try to flash a supersu zip file for the update or one from a rom in the development thread . I just updated myself but didn't reboot yet.
Click to expand...
Click to collapse
I downloaded the supersu zip from chainfire's site supersu 2.46. Flashed it and then rebooted, however the boot never ended, it doesn't seem to be bootlooping it just gets to the final boot animation and sits on that, waited 10 minutes and it still never made it to the home screen, trying to figure out how to get into twrp from here.
Okay, i found this thread https://forum.xda-developers.com/v20/how-to/booting-recovery-t3488099/page2 which states that pressing the power and volume down button in a certain way will take me to a white screen asking me to reset my phone and that if i have twrp installed (Which i do) it will take me to twrp saying yes, should i do this to get to twrp and then flash Supersu 2.79 as jeston suggested? And should i wipe dalvik/cache after flashing?
Okay i fixed it, entered the bootloader by doing the power and volume button factory reset thing i found and then flashed supersu 2.79, then wiped the dalvik/cache and rebooted, it bootlooped once but it started after that and is working perfectly! Thank you all for your help!
Good to see you're sorted now.
meccano300 said:
Hey, today Supersu wanted to update from the play store so i updated it, and once it was done it asked to restart the phone like usual, i restarted and when it was done booting supersu said the phone was no longer rooted. Not exactly sure what to do to fix this, i am on the unlocked V20 (US996) i am not running any rom, just stock and root. Hopefully you guys can help me get root back on my phone, thank you.
Click to expand...
Click to collapse
I had the same problem. Lost root after allowing supersu to update from playstore.
Just flashed supersu2.79.zip in twrp and was rooted again.
I lost root after updating SuperSU. I don't think it was from the Play Store, it was a SuperSU notification that kept bugging so I let it do it's thing and then lost root after rebooting. I do not have TWRP because I have a locked bootloader (Samsung on Verizon). How do I get it back?