PIT File - Galaxy S6 Edge+ Q&A, Help & Troubleshooting

Hi guys! So I was getting me a new ROM yesterday. I saw somewhere that there was a new version of TWRP available, so I decided to update it first. For the first time I thought I'd use the TWRP manager and install the new recovery. It all went well. App downloaded the new rec. Double checked it was the correct one and hit install. Then I got a question and a suggestion of what partition I wanted to install on. I don't know of the partitions so I assumed the app choosed the right one. Installed and when rebooting to rec it stopped on the boot screen. Nothing more happened. After 30 minutes I hit download mode and choosed cancel to get to reboot in to system. Same thing, stuck on the first boot screen. I decided there was nothing else to do but revert back to stock via Odin. The phone sat on the boot screen for about one hour while I downloaded everything needed and set up everything. I then followed the text book and installed latest stock. All went well and phone booted up on stock. I quickly went through the setup wizard and headed straight in to developer mode and ticked OEM and USB debugging. Into Odin again and installed the same TWRP I had before. Did everything I was supposed to, including un tick the reboot box. The rec installed fine. I rebooted into download mode again and selected cancel. Quickly hit the buttons for recovery reboot and saw the welcoming red warning about "recovery is not......". But, to my despair it stuck on the first boot screen again. Have tried the same procedure twice now, but the outcome is the same.Do you think the app ( read: ME ) screwed up the partitions? And if so, should I once again install stock ROM but this time use a PIT file? Been reading about it and it seems like it's very scary to use the PIT. I'm now back on stock with stock recovery and everything works fine. I wanted, so badly, to try out the new CM build from @Rainbow_Dash but...... Any advice guys?

thools60 said:
Hi guys! So I was getting me a new ROM yesterday. I saw somewhere that there was a new version of TWRP available, so I decided to update it first. For the first time I thought I'd use the TWRP manager and install the new recovery. It all went well. App downloaded the new rec. Double checked it was the correct one and hit install. Then I got a question and a suggestion of what partition I wanted to install on. I don't know of the partitions so I assumed the app choosed the right one. Installed and when rebooting to rec it stopped on the boot screen. Nothing more happened. After 30 minutes I hit download mode and choosed cancel to get to reboot in to system. Same thing, stuck on the first boot screen. I decided there was nothing else to do but revert back to stock via Odin. The phone sat on the boot screen for about one hour while I downloaded everything needed and set up everything. I then followed the text book and installed latest stock. All went well and phone booted up on stock. I quickly went through the setup wizard and headed straight in to developer mode and ticked OEM and USB debugging. Into Odin again and installed the same TWRP I had before. Did everything I was supposed to, including un tick the reboot box. The rec installed fine. I rebooted into download mode again and selected cancel. Quickly hit the buttons for recovery reboot and saw the welcoming red warning about "recovery is not......". But, to my despair it stuck on the first boot screen again. Have tried the same procedure twice now, but the outcome is the same.Do you think the app ( read: ME ) screwed up the partitions? And if so, should I once again install stock ROM but this time use a PIT file? Been reading about it and it seems like it's very scary to use the PIT. I'm now back on stock with stock recovery and everything works fine. I wanted, so badly, to try out the new CM build from @Rainbow_Dash but...... Any advice guys?
Click to expand...
Click to collapse
From what i understand you seem to be having problems with twrp.That is very common scince you didnt get one compatible win mm bootloader.Use this one
http://forum.xda-developers.com/s6-edge-plus/orig-development/recovery-official-twrp-galaxy
If you really think the pit is the problem i can link you one.But that shouldn be neccesary if you installed what i linked you at.
Btw let me know how my rom goes.

Rainbow_Dash said:
From what i understand you seem to be having problems with twrp.That is very common scince you didnt get one compatible win mm bootloader.Use this one
http://forum.xda-developers.com/s6-edge-plus/orig-development/recovery-official-twrp-galaxy
If you really think the pit is the problem i can link you one.But that shouldn be neccesary if you installed what i linked you at.
Btw let me know how my rom goes.
Click to expand...
Click to collapse
Thanks Rainbow! I'll try it as soon I get home from work:good: But shouldn't TWRP 3.0.2 be compatible?

thools60 said:
Thanks Rainbow! I'll try it as soon I get home from work:good: But shouldn't TWRP 3.0.2 be compatible?
Click to expand...
Click to collapse
The version number isnt really important.Its comaptibility with the mm bootloader is what makes it unbootable.
The one that i linked you is what I use and i would rate it 100% compatible and functional

Related

Phone Bricked? Please help

So I rooted my RAZR M using motofail2go, and all was well.
Installed 'RAZR-M-Safestrap-3.12', as I was going to flash a custom ROM. I first backed up my Original Rom using the backup function.
I then wiped 'System', and went to flash the new ROM, but the flash did not work, so I restarted.
Now the problem is when the phone reboots, it showes the Safestrap splash screen with the Recovery option and start normal, but it is not working, as not sensing my inputs or something, after about 5 sec it goes to a blank screen and sits.
I tried to hard boot into the Android System Recovery, and tried to download an official Verizon ROM and install using 'apply update from external storage' using my micro sd, but I keep getting an error E:signature verification failed.
Does anyone know where I can find an official ROM to set it back to normal so I can use my phone again?
Thanks in advance.
Also: My phone originally had 4.0.4 version.
cfdp said:
So I rooted my RAZR M using motofail2go, and all was well.
Installed 'RAZR-M-Safestrap-3.12', as I was going to flash a custom ROM. I first backed up my Original Rom using the backup function.
I then wiped 'System', and went to flash the new ROM, but the flash did not work, so I restarted.
Now the problem is when the phone reboots, it showes the Safestrap splash screen with the Recovery option and start normal, but it is not working, as not sensing my inputs or something, after about 5 sec it goes to a blank screen and sits.
I tried to hard boot into the Android System Recovery, and tried to download an official Verizon ROM and install using 'apply update from external storage' using my micro sd, but I keep getting an error E:signature verification failed.
Does anyone know where I can find an official ROM to set it back to normal so I can use my phone again?
Thanks in advance.
Also: My phone originally had 4.0.4 version.
Click to expand...
Click to collapse
if you can get back into recovery, you should be able to press "restore" assuming you backed up your previous ROM.
cfdp said:
So I rooted my RAZR M using motofail2go, and all was well.
Installed 'RAZR-M-Safestrap-3.12', as I was going to flash a custom ROM. I first backed up my Original Rom using the backup function.
I then wiped 'System', and went to flash the new ROM, but the flash did not work, so I restarted.
Now the problem is when the phone reboots, it showes the Safestrap splash screen with the Recovery option and start normal, but it is not working, as not sensing my inputs or something, after about 5 sec it goes to a blank screen and sits.
I tried to hard boot into the Android System Recovery, and tried to download an official Verizon ROM and install using 'apply update from external storage' using my micro sd, but I keep getting an error E:signature verification failed.
Does anyone know where I can find an official ROM to set it back to normal so I can use my phone again?
Thanks in advance.
Also: My phone originally had 4.0.4 version.
Click to expand...
Click to collapse
What you might want to to is use RSDlite and flash that image you downloaded. This seems like it would help you, though I have not personally tried it:
http://www.andromods.com/tips-trick...oid-razr-m-xt907-stock-original-firmware.html
EDIT: And once the flash is complete, I would reboot into recovery again and wipe data and cache and then let it boot into the phone.
EDIT 2: Oh, and in addition to RSDLite, you will need the Motorola USB drivers so your computer can see the phone over USB.
Coronado is dead said:
What you might want to to is use RSDlite and flash that image you downloaded. This seems like it would help you, though I have not personally tried it:
http://www.andromods.com/tips-trick...oid-razr-m-xt907-stock-original-firmware.html
EDIT: And once the flash is complete, I would reboot into recovery again and wipe data and cache and then let it boot into the phone.
EDIT 2: Oh, and in addition to RSDLite, you will need the Motorola USB drivers so your computer can see the phone over USB.
Click to expand...
Click to collapse
Dude, you sir, are a life saver. I couldn't find the info that the link you just posted anywhere. Now I can fix my phone, lol..
Sent from my PG86100 using Tapatalk 2
Coronado is dead said:
What you might want to to is use RSDlite and flash that image you downloaded. This seems like it would help you, though I have not personally tried it:
xxxx
EDIT: And once the flash is complete, I would reboot into recovery again and wipe data and cache and then let it boot into the phone.
EDIT 2: Oh, and in addition to RSDLite, you will need the Motorola USB drivers so your computer can see the phone over USB.
Click to expand...
Click to collapse
Sorry xda wouldn't let me post, reCaptcha wasn't working for some reason. Realized your link wasn't allowing me to reply lol
Anyways, Thanks a lot, that got me back up to stock and working, and I was able to reflash a custom rom (flashed to Rom slot 1, then backed up, and recovered into the stock slot). :good:

[Q] Malladus 1.2.5 stuck at boot.

I've heard ranting and raving about Malladus and I decided to flash it yesterday. It won't take the flash no matter what I do.
I've tried: Flashing 1.2.4, downloading both again to make sure it wasn't a download issue, using different gapps package, using a different lg apps package, using CWM, using TWRP, side-loading... ETC
Bottom line: My phone will not take the ROM. It flashes the LG logo and gets stuck at a black screen where the back-light is on but nothing is displayed on the screen.
I am an experienced flasher and I have no idea what is going on. I am backed up and can get into TWRP to restore so I am all good as far as not being bricked goes but I really want to try out this damn rom.
Any help would be much appreciated. Thanks.
Bump I'm having the same problem, I'm on Verizon.
NBushyy said:
Bump I'm having the same problem, I'm on Verizon.
Click to expand...
Click to collapse
Yeah same here. Verizon. Forgot to mention it.
Still a problem. Bumping.
I am in the boat with you. I thought it was just me.
Same Black Screen issue
Did anyone have any luck resolving this? Ive tried with both twrp and cwm and same issue...?
Same problem on my Verizon model. Using twrp 2.6.3.3. Other roms work fine.
How long have you left it at the black screen? Sometimes a fresh load can take up to 10 minutes.
Also, the rom will work without gapps and lgapps, so try just loading the rom. I know you downloaded twice, but did you check the md5 sum either time?
heleos said:
How long have you left it at the black screen? Sometimes a fresh load can take up to 10 minutes.
Also, the rom will work without gapps and lgapps, so try just loading the rom. I know you downloaded twice, but did you check the md5 sum either time?
Click to expand...
Click to collapse
I left it there for a good 15 minutes. I also had it plugged into my laptop. It kept detecting the phone as plugged in. Seems like it is stuck in a bootloop or something. I also tried installing only the ROM without the gapps and lgapps and had the same result. I also checked the MD5 sum and it matched. (I know I'm kinda hijacking this original post, but I think we are all having the exact same issue)
try this
trackstar1414 said:
I left it there for a good 15 minutes. I also had it plugged into my laptop. It kept detecting the phone as plugged in. Seems like it is stuck in a bootloop or something. I also tried installing only the ROM without the gapps and lgapps and had the same result. I also checked the MD5 sum and it matched. (I know I'm kinda hijacking this original post, but I think we are all having the exact same issue)
Click to expand...
Click to collapse
Can you restore your nandroid and flash say, CleanROM 1.0 or DigitalDream 2.1? OR try this:
1. Hold the power button until the device is OFF.
2. Download LG drivers to the PC (LG VZW_United_WHQL_v2.11.1) and LG mobile support tool (B2CAppSetup).
3. Install these packages.
4. Plug in you USB cable into the phone but not the computer.
5. Hold volume up and insert the USB cable to the PC- the phone should boot to 'download mode'.
6. Open the support tool and click Options>Upgrade Recovery, follow the prompts.
7. At the first prompt indentify your phone using IMEI/ESN, then click OK
8. Let it do its thing, the phone will reboot and most likely have a bunch of error messages and some FC's. Just hit okay to all messages, the phone will settle after 2 minutes or so.
9. Download freegee from market and reflash recovery of your choice.
10. Make sure you have a ROM saved to the SD to flash
11. Use freegee to reboot to recovery
12. Once in recovery you can reflash the ROM as normal.
13. Reboot and Profit!
*$* Or you could go back to Stock and start fresh!
*$* BEFORE ANY FLASH ALWAYS STOP and MAKE A NANDROID BACKUP!
Good Luck and if you get stuck let me know
geosnipe said:
Can you restore your nandroid and flash say, CleanROM 1.0 or DigitalDream 2.1? OR try this:
1. Hold the power button until the device is OFF.
2. Download LG drivers to the PC (LG VZW_United_WHQL_v2.11.1) and LG mobile support tool (B2CAppSetup).
3. Install these packages.
4. Plug in you USB cable into the phone but not the computer.
5. Hold volume up and insert the USB cable to the PC- the phone should boot to 'download mode'.
6. Open the support tool and click Options>Upgrade Recovery, follow the prompts.
7. At the first prompt indentify your phone using IMEI/ESN, then click OK
8. Let it do its thing, the phone will reboot and most likely have a bunch of error messages and some FC's. Just hit okay to all messages, the phone will settle after 2 minutes or so.
9. Download freegee from market and reflash recovery of your choice.
10. Make sure you have a ROM saved to the SD to flash
11. Use freegee to reboot to recovery
12. Once in recovery you can reflash the ROM as normal.
13. Reboot and Profit!
*$* Or you could go back to Stock and start fresh!
*$* BEFORE ANY FLASH ALWAYS STOP and MAKE A NANDROID BACKUP!
Good Luck and if you get stuck let me know
Click to expand...
Click to collapse
I am able to restore my nandroid backup so I'm not completely stuck without a phone. I will try flashing one of the other ROMs and see how it goes now. Thanks for the help so far.
trackstar1414 said:
I am able to restore my nandroid backup so I'm not completely stuck without a phone. I will try flashing one of the other ROMs and see how it goes now. Thanks for the help so far.
Click to expand...
Click to collapse
I was able to install the digital dream rom without any issue. At this point I think its the sequence I did everything. I did the latest ota before installing any Recovery. I used the loki method to install the recovery. In looking at all the roms, it appears that malladus may not be "loki patched" for people already on 12b? Other roms I have tried mention that so thats why I'm speculating this. I am by no means a developer so I might be out in left field on this one. I guess I'll stick with stock or another ROM for now until his next update.
It also looks like people are discussing this on the main ROM forum as well so hopefully it will work in the future.
Thanks again for the help and suggestions.
trackstar1414, say thanks by using the "Thanks' button like this.. keep me informed, CHEERS!
trackstar1414 said:
I was able to install the digital dream rom without any issue. At this point I think its the sequence I did everything. I did the latest ota before installing any Recovery. I used the loki method to install the recovery. In looking at all the roms, it appears that malladus may not be "loki patched" for people already on 12b? Other roms I have tried mention that so thats why I'm speculating this. I am by no means a developer so I might be out in left field on this one. I guess I'll stick with stock or another ROM for now until his next update.
It also looks like people are discussing this on the main ROM forum as well so hopefully it will work in the future.
Thanks again for the help and suggestions.
Click to expand...
Click to collapse
Wanted to share this if you haven't read it..
http://forum.xda-developers.com/showthread.php?t=2449670
I had issues originally and had to flash back to 1.2.3.
What I ended up doing was switching to CWM 6.0.4.4 ( I was using TWRP 2.6.3.3).
His boot skipped the set up wizard as well, which was odd.
His was also the only ROM I ever got stuck on the fastboot screen while using twrp.
Try ( at your own risk obviously) flashing back to an older malladus (wipe all and boot till you get through the set up wizard),
Then back to recovery, do a wipe, without wiping the system partition, Data Cache and Davlik, and flash back to 1.2.5.
I didn't try it on 1.2.5. But that's how I got into 1.2.4.
Srvisg0d said:
I've heard ranting and raving about Malladus and I decided to flash it yesterday. It won't take the flash no matter what I do.
I've tried: Flashing 1.2.4, downloading both again to make sure it wasn't a download issue, using different gapps package, using a different lg apps package, using CWM, using TWRP, side-loading... ETC
Bottom line: My phone will not take the ROM. It flashes the LG logo and gets stuck at a black screen where the back-light is on but nothing is displayed on the screen.
I am an experienced flasher and I have no idea what is going on. I am backed up and can get into TWRP to restore so I am all good as far as not being bricked goes but I really want to try out this damn rom.
Any help would be much appreciated. Thanks.
Click to expand...
Click to collapse
Are you on 12B OTA? If so, that would be your issue. I took the 12B OTA and tried flashing Malladus and got the same issue you have. You can revert your phone to 11A and that should resolve your issue. http://forum.xda-developers.com/showthread.php?t=2448960 it will erase everything on your phone and go back to unroot.

[Q] Stuck on LG logo

I recently purchased a lg g2, the korean variant f320s, it was running kitkat with a lot of bloatware on top. I successfully rooted the phone and after that i found a cwm recovery installer for this version of the phone and i hooked up the phone and ran the installer on my pc, it finished installing and the phone rebooted into the custom recovery which was in chinese i went into a menu option and then pressed the back button on the screen and the phone instantly rebooted and got stuck at lg boot logo. Is there anyway to fix this? i have tried wiping cache, dalvik and factory reset from the recovery that i can access(chinese or something) but to no avail. I can access the download mode but my pc does'nt recognize the phone and this step is crucial for i guess installing the stock rom through lg flash tools. The phone however is recognized when im in recovery and i plug it in but it only shows as a drive that is faded out and entering it shows nothing. please help me i just got it two days ago
Have you tried to use adb to sideload a rom?
playerone_ said:
Have you tried to use adb to sideload a rom?
Click to expand...
Click to collapse
i'm sorry im a complete noob in this regard could you explain a bit on how to go about doing that? i am downloading the stock kitkat rom for the model its in kdz format
.
I flashed cloudy flex rom on it through external sd in recovery and now when i boot it up it stays on lg logo for a while then screen goes black and botts up again directly into CWM recovery, please help someone...
Same problem
sheroy1995 said:
I recently purchased a lg g2, the korean variant f320s, it was running kitkat with a lot of bloatware on top. I successfully rooted the phone and after that i found a cwm recovery installer for this version of the phone and i hooked up the phone and ran the installer on my pc, it finished installing and the phone rebooted into the custom recovery which was in chinese i went into a menu option and then pressed the back button on the screen and the phone instantly rebooted and got stuck at lg boot logo. Is there anyway to fix this? i have tried wiping cache, dalvik and factory reset from the recovery that i can access(chinese or something) but to no avail. I can access the download mode but my pc does'nt recognize the phone and this step is crucial for i guess installing the stock rom through lg flash tools. The phone however is recognized when im in recovery and i plug it in but it only shows as a drive that is faded out and entering it shows nothing. please help me i just got it two days ago
Click to expand...
Click to collapse
EXACT same problem as you... Every detail is exactly the same.
I am trying to find a solution. Any luck?
.
naleyb01 said:
EXACT same problem as you... Every detail is exactly the same.
I am trying to find a solution. Any luck?
Click to expand...
Click to collapse
Yeah you just need to flash a different rom through the sd card i tried cloudy rom but it didnt work then a i tried Lamhoang rom and it did the trick im on jellybean now though and i'll try flashing something else in a month or so
ALL FIXED
You are a legend!! Device back up and running.
Okay so I installed that same rom you did but the home/back/menu buttons weren't working so not wanting to muck around, I did some quick searching (which I should have done before >.<) and worked out how to get the Cloudy roms working on a korean device.
You need "Philz cloudy f320 recovery", the kitkat baseband and the rom. LINK
1 - Install the new recovery from zip and then boot back into recovery after this. You will now be greeted with philz recovery which is awesome.
2 - From here, proceed to install the rom as noted on the rom page.
This process worked for me for the Cloudy G3 V1.3 rom.
Thanks a lot for your help!! happy to return the favour! But i am hoping the above info already does that. :victory:
naleyb01 said:
You are a legend!! Device back up and running.
Okay so I installed that same rom you did but the home/back/menu buttons weren't working so not wanting to muck around, I did some quick searching (which I should have done before >.<) and worked out how to get the Cloudy roms working on a korean device.
You need "Philz cloudy f320 recovery",
1 - Install the new recovery from zip and then boot back into recovery after this. You will now be greeted with philz recovery which is awesome.
2 - From here, proceed to install the rom as noted on the rom page.
This process worked for me for the Cloudy G3 V1.3 rom.
Thanks a lot for your help!! happy to return the favour! But i am hoping the above info already does that. :victory:
Click to expand...
Click to collapse
Good to know you got it working again i still cant figure out why this problem occurred in the first place why did the phone brick from the recovery when the recovery was working fiblne after? Also i can just get the new recovery over the one already on the phone without removing the previous one right? Thanks for the info im gonna try out the cloudy roms soon
I have no idea.. something to do with that chinese recovery I am guessing.. There are still a few issues I am going to address but for now my phone is 95% working.
The only issue is that if I try go into download mode, it still doesn't go to the second screen (All i get is the small blue dots). Bit of a pain because that's something nice to fall back on if you ever need to.
I'll search around and try and figure these out in the next week or two, but I am happy with what I have for the moment.
Yep, you literally install the new recovery over your current one and then you can restart phone back into your rom and then reboot back into recovery using an app or the button method.
naleyb01 said:
I have no idea.. something to do with that chinese recovery I am guessing.. There are still a few issues I am going to address but for now my phone is 95% working.
The only issue is that if I try go into download mode, it still doesn't go to the second screen (All i get is the small blue dots). Bit of a pain because that's something nice to fall back on if you ever need to.
I'll search around and try and figure these out in the next week or two, but I am happy with what I have for the moment.
Yep, you literally install the new recovery over your current one and then you can restart phone back into your rom and then reboot back into recovery using an app or the button method.
Click to expand...
Click to collapse
Yeah i have the same issue with the download mode as well and the phone cant seem to sync properly with the lg mobile support tool either.Do let me know if you figure something out

[Q] Help a noob, cannot boot after trying to flash stock rom

So I'm pretty desperate and I apologize if similar info was posted somewhere else. I've been researching several hours but couldn't find anything.
I originally installed CM11 and decided to experiment with a different rom TriForce ROM [TouchWiz]. I put the zip file on my SD card and booted into clockworkmod it gave an error of bad zip. I tried different usb port to transfer the zip, downloaded it multiple times with no result. So I decided to try a different rom Stock_Rooted_Deodexed_MF9_Rom.zip. The installation finished but the phone would not boot.
Recently I flashed the stock rom from odin, it finished successfully but still not boot, Galaxy sreen lights up quickly and that's it.
rmngorelov said:
So I'm pretty desperate and I apologize if similar info was posted somewhere else. I've been researching several hours but couldn't find anything.
I originally installed CM11 and decided to experiment with a different rom TriForce ROM [TouchWiz]. I put the zip file on my SD card and booted into clockworkmod it gave an error of bad zip. I tried different usb port to transfer the zip, downloaded it multiple times with no result. So I decided to try a different rom Stock_Rooted_Deodexed_MF9_Rom.zip. The installation finished but the phone would not boot.
Recently I flashed the stock rom from odin, it finished successfully but still not boot, Galaxy sreen lights up quickly and that's it.
Click to expand...
Click to collapse
Restore from nandroid backup. I hope you made one. Try going into recovery do a factory reset and wipe all cache and data and what not and then install a ROM from Odin.
rmngorelov said:
So I'm pretty desperate and I apologize if similar info was posted somewhere else. I've been researching several hours but couldn't find anything.
I originally installed CM11 and decided to experiment with a different rom TriForce ROM [TouchWiz]. I put the zip file on my SD card and booted into clockworkmod it gave an error of bad zip. I tried different usb port to transfer the zip, downloaded it multiple times with no result. So I decided to try a different rom Stock_Rooted_Deodexed_MF9_Rom.zip. The installation finished but the phone would not boot.
Recently I flashed the stock rom from odin, it finished successfully but still not boot, Galaxy sreen lights up quickly and that's it.
Click to expand...
Click to collapse
Make sure you're using roms for your version of your phone. the MF9 bootloader is really old and probably wont install anymore. My phone did this before and I thought I bricked it, but I kid you not I took the battery out and removed the SIM card and rebooted and it booted up just fine. May not work for you, but I suggest you go back to update stock firmware then try again. If you're using the triband model, there's a post around here somewhere with confirmed roms that wont brick your device. I'm currently using the Google Play Edition Stock ROM and it's working GREAT.
Link for new firmware (NG5 Firmware): https://mega.co.nz/#F!0JdRkIZR!AqqKdbvba_Hpg5VrCmrbPw
i7vSa7vi7y said:
Restore from nandroid backup. I hope you made one. Try going into recovery do a factory reset and wipe all cache and data and what not and then install a ROM from Odin.
Click to expand...
Click to collapse
I restored to this stock ROM before and everything worked well. Currently I can't boot into recovery, Samsung flashes once and that's it, that's why I'm desperate the only thing I can do is boot in to download mode for odin.
silentdeath631 said:
Make sure you're using roms for your version of your phone. the MF9 bootloader is really old and probably wont install anymore. My phone did this before and I thought I bricked it, but I kid you not I took the battery out and removed the SIM card and rebooted and it booted up just fine. May not work for you, but I suggest you go back to update stock firmware then try again. If you're using the triband model, there's a post around here somewhere with confirmed roms that wont brick your device. I'm currently using the Google Play Edition Stock ROM and it's working GREAT.
Link for new firmware (NG5 Firmware):
Click to expand...
Click to collapse
Does it matter that I can't get into recovery to clear the cache first before trying new roms?
silentdeath631 said:
Make sure you're using roms for your version of your phone. the MF9 bootloader is really old and probably wont install anymore. My phone did this before and I thought I bricked it, but I kid you not I took the battery out and removed the SIM card and rebooted and it booted up just fine. May not work for you, but I suggest you go back to update stock firmware then try again. If you're using the triband model, there's a post around here somewhere with confirmed roms that wont brick your device. I'm currently using the Google Play Edition Stock ROM and it's working GREAT.
Link for new firmware (NG5 Firmware):
Click to expand...
Click to collapse
Maybe I'm doing something foolish but every time I try to download files from the link you gave I get a decryption error so I can't download them zip or original.
rmngorelov said:
I restored to this stock ROM before and everything worked well. Currently I can't boot into recovery, Samsung flashes once and that's it, that's why I'm desperate the only thing I can do is boot in to download mode for odin.
Click to expand...
Click to collapse
Just hold home power and volume up. Right when you see text at the top left let go. You have to have the right timing
i7vSa7vi7y said:
Just hold home power and volume up. Right when you see text at the top left let go. You have to have the right timing
Click to expand...
Click to collapse
After almost eight hours of troubleshooting I finally got it to work.
I've tried flashing clockworkmod several times to see if I could get into recovery with no result so I gave up on that and I flashed the newest stock rom I could find L720VPUFNG2_L720SPTFNG2_SPR and it was still not booting. Than I thought maybe twerp would make a difference and god almighty it finally booted! I felt as if I gave birth to a child after eight hours of labor!
Now I'm extremely paranoid about touching anything because it took me forever to do this. Does anyone know why flashing twerp would make such a difference? I know this sort of stuff can get extremely complicated but I'd like to try to understand.
I hope my foolish agony contributed to this community if not in any other way except by the comedic relief caused by my ignorance.
rmngorelov said:
After almost eight hours of troubleshooting I finally got it to work.
I've tried flashing clockworkmod several times to see if I could get into recovery with no result so I gave up on that and I flashed the newest stock rom I could find L720VPUFNG2_L720SPTFNG2_SPR and it was still not booting. Than I thought maybe twerp would make a difference and god almighty it finally booted! I felt as if I gave birth to a child after eight hours of labor!
Now I'm extremely paranoid about touching anything because it took me forever to do this. Does anyone know why flashing twerp would make such a difference? I know this sort of stuff can get extremely complicated but I'd like to try to understand.
I hope my foolish agony contributed to this community if not in any other way except by the comedic relief caused by my ignorance.
Click to expand...
Click to collapse
Depends what recovery you had and what version. I personally like Philz touch recovery but TWRP is good. Now wipe and flash a ROM my friend or restore a backup
rmngorelov said:
After almost eight hours of troubleshooting I finally got it to work.
I've tried flashing clockworkmod several times to see if I could get into recovery with no result so I gave up on that and I flashed the newest stock rom I could find L720VPUFNG2_L720SPTFNG2_SPR and it was still not booting. Than I thought maybe twerp would make a difference and god almighty it finally booted! I felt as if I gave birth to a child after eight hours of labor!
Now I'm extremely paranoid about touching anything because it took me forever to do this. Does anyone know why flashing twerp would make such a difference? I know this sort of stuff can get extremely complicated but I'd like to try to understand.
I hope my foolish agony contributed to this community if not in any other way except by the comedic relief caused by my ignorance.
Click to expand...
Click to collapse
im having similar issues. which version of TWRP worked for you?
thank you
fearthemarchx said:
im having similar issues. which version of TWRP worked for you?
thank you
Click to expand...
Click to collapse
I recommend flashing the newest one here using odin
http://teamw.in/project/twrp2
Then once you are able to boot into recovery go to wipe and perform both factory reset and format data. Then install whatever rom you like, I used Sprint Galaxy S4 SPH-L720 VPUFNAE (Androdi 4.4.2) found here
http://galaxys4root.com/galaxy-s4-stock-firmware/ (or maybe find a newer stock rom if this one gives you errors)
Just copy the zip file to the phone, boot into twrp, do wipe factory reset again, select install then select the zip in whatever directory and you should be good to go. Make sure you do a back up in twrp once you get the phone to boot so you can always revert to stock.
I hope I was thorough enough that some of the information was useful. Let me know if you need any more help.
only certain recoveries will stick. ive tried the most recent twrp, with no luck. only a few versions of philztouch work.
Sent from my LGL34C using XDA Free mobile app
fearthemarchx said:
only certain recoveries will stick. ive tried the most recent twrp, with no luck. only a few versions of philztouch work.
Sent from my LGL34C using XDA Free mobile app
Click to expand...
Click to collapse
Format with philztouch that works then try flashing a new stock rom with odin. That should bring everything back to stock including the recovery.
ive tried. when i flash rom via odin i only get a blue "recovery booting" at the top of boot screen. even when i only power on, not into recovery. im going to attempt to flash rom provided in previous post via philz.
Sent from my LGL34C using XDA Free mobile app
fearthemarchx said:
ive tried. when i flash rom via odin i only get a blue "recovery booting" at the top of boot screen. even when i only power on, not into recovery. im going to attempt to flash rom provided in previous post via philz.
Sent from my LGL34C using XDA Free mobile app
Click to expand...
Click to collapse
You're in download mode when you flash from odin right? If you your getting an error flashing, try a different stock rom after reformating/resetting to factory (it's crucial to clear the cache before trying a different rom). I had to try a few roms before I found one that worked.

Samsung J5 was rooted, did factory reset now I'm lost

Hello,
Like the title says, I have a Samsung J5, I rooted it as soon as I got it maybe a year or so ago.
I never had any issues with it. This morning, however I made a (now in hindsight) bad decision by factory resetting, dont even ask me why I thought I needed to factory reset it, I already did it.
Anyways, I did the factory reset from the phone and it instantly rebooted into TWRP, and here's where I got lost. I don't know what to do from here.
I assumed the phone would just reset itself, but it always reboots in recovery mode.
I thought maybe I had to flash a ROM again (I flashed a custom one and then stock back when I first rooted it, but my memory is terrible and I just have faint memories of it), I looked that up and found I needed Odin, the stock rom I wanted to flash and to reboot into download mode. So I got all I required and I don't think Odin is finding my phone.
My phone just has the blue screen saying downloading... and do not turn off target. Nothing else. and Odin doesn't show anything (I think it's supposed to show the device somewhere? Anyways, I'm super lost and I have no idea what to do.
I mostly just need someone to point me in the right direction, maybe some instructions I can follow or something, I'm not super experienced as you can tell but I can follow basic instructions when I'm not being dumb.
TL;DR: Did factory reset on rooted J5, now it only boots into TWRP, no idea where to go from here, stock rom flash?
4tson said:
Hello,
Like the title says, I have a Samsung J5, I rooted it as soon as I got it maybe a year or so ago.
I never had any issues with it. This morning, however I made a (now in hindsight) bad decision by factory resetting, dont even ask me why I thought I needed to factory reset it, I already did it.
Anyways, I did the factory reset from the phone and it instantly rebooted into TWRP, and here's where I got lost. I don't know what to do from here.
I assumed the phone would just reset itself, but it always reboots in recovery mode.
I thought maybe I had to flash a ROM again (I flashed a custom one and then stock back when I first rooted it, but my memory is terrible and I just have faint memories of it), I looked that up and found I needed Odin, the stock rom I wanted to flash and to reboot into download mode. So I got all I required and I don't think Odin is finding my phone.
My phone just has the blue screen saying downloading... and do not turn off target. Nothing else. and Odin doesn't show anything (I think it's supposed to show the device somewhere? Anyways, I'm super lost and I have no idea what to do.
I mostly just need someone to point me in the right direction, maybe some instructions I can follow or something, I'm not super experienced as you can tell but I can follow basic instructions when I'm not being dumb.
TL;DR: Did factory reset on rooted J5, now it only boots into TWRP, no idea where to go from here, stock rom flash?
Click to expand...
Click to collapse
Try factory reset in TWRP under "wipe" and try rebooting then.
If that doesn't work download a rom from xda for your device onto an sd card. Then put the sd card into the phone, Reboot into twrp and flash the ROM.
The reason odin isn't picking up your device is more than likely USB debugging isn't enabled which you can only do from inside the phones settings. Enable it once you flash the new rom and then flash your old firmware using odin afterwards if you wish.
Do you know what model it is?
Or even what year model it is? 2015?/16?/17?
If you can boot into twrp you have nothing to worry about as it can be easily resolved
garylawwd said:
Try factory reset in TWRP under "wipe" and try rebooting then.
If that doesn't work download a rom from xda for your device onto an sd card. Then put the sd card into the phone, Reboot into twrp and flash the ROM.
The reason odin isn't picking up your device is more than likely USB debugging isn't enabled which you can only do from inside the phones settings. Enable it once you flash the new rom and then flash your old firmware using odin afterwards if you wish.
Do you know what model it is?
Or even what year model it is? 2015?/16?/17?
If you can boot into twrp you have nothing to worry about as it can be easily resolved
Click to expand...
Click to collapse
Hey
I have already tried doing the factory reset from TWRP, but when I reboot after that it goes back into recovery mode, if I try to reboot from recovery mode into system it just goes back to recovery mode as well.
I'll try downloading another rom, I got the stock one in there but it doesn't flash it from TWRP, which I'm pretty sure is expected behaviour anyways.
The model is SM-J510MN 2016, I'll start looking for a rom.
Thanks
4tson said:
Hey
I have already tried doing the factory reset from TWRP, but when I reboot after that it goes back into recovery mode, if I try to reboot from recovery mode into system it just goes back to recovery mode as well.
I'll try downloading another rom, I got the stock one in there but it doesn't flash it from TWRP, which I'm pretty sure is expected behaviour anyways.
The model is SM-J510MN 2016, I'll start looking for a rom.
Thanks
Click to expand...
Click to collapse
You can't flash the stock rom in TWRP because it is a .zip.tar file and twrp can only flash .zip files or .img files
garylawwd said:
You can't flash the stock rom in TWRP because it is a .zip.tar file and twrp can only flash .zip files or .img files
Click to expand...
Click to collapse
Yeah, I may or may not have already tried hehe.
You wouldn't happen to have a rom that's not being hosted on Mega would you? I exceeded my limit when I was 95% done downloading one of them.
I think I found one, whoops.
4tson said:
Hello,
Like the title says, I have a Samsung J5, I rooted it as soon as I got it maybe a year or so ago.
I never had any issues with it. This morning, however I made a (now in hindsight) bad decision by factory resetting, dont even ask me why I thought I needed to factory reset it, I already did it.
Anyways, I did the factory reset from the phone and it instantly rebooted into TWRP, and here's where I got lost. I don't know what to do from here.
I assumed the phone would just reset itself, but it always reboots in recovery mode.
I thought maybe I had to flash a ROM again (I flashed a custom one and then stock back when I first rooted it, but my memory is terrible and I just have faint memories of it), I looked that up and found I needed Odin, the stock rom I wanted to flash and to reboot into download mode. So I got all I required and I don't think Odin is finding my phone.
My phone just has the blue screen saying downloading... and do not turn off target. Nothing else. and Odin doesn't show anything (I think it's supposed to show the device somewhere? Anyways, I'm super lost and I have no idea what to do.
I mostly just need someone to point me in the right direction, maybe some instructions I can follow or something, I'm not super experienced as you can tell but I can follow basic instructions when I'm not being dumb.
TL;DR: Did factory reset on rooted J5, now it only boots into TWRP, no idea where to go from here, stock rom flash?
Click to expand...
Click to collapse
maybe install usb drivers and try this: disconnect device, hold power, home and vol up key, connect device and then press volume up to enter download mode
Dyeide said:
maybe install usb drivers and try this: disconnect device, hold power, home and vol up key, connect device and then press volume up to enter download mode
Click to expand...
Click to collapse
Yep, I tried that, although I'm not sure the USB drivers I downloaded were correct, since the official page isn't working at least for me. So I downloaded what the websites claimed were the correct drivers, I went into download mode that way, which has some debug info on the top left stating it's in Odin mode, but Odin still didn't recognize it.
I'm pretty sure usb debug options were turned on before this, but I'm not sure if the factory reset could've messed with that, thought I'm assuming it could be part of it.
I'm currently trying to download some custom roms to follow garylawwd's advice, I'll reply once I've got results.
garylawwd said:
You can't flash the stock rom in TWRP because it is a .zip.tar file and twrp can only flash .zip files or .img files
Click to expand...
Click to collapse
So I downloaded one, wiped everything, installed it via twrp, it apparently installed it correctly, rebooted the system and it went straight into recovery mode again. It's not letting me reboot into anything that isn't download or recovery. Any other ideas? Am I doing something wrong?
4tson said:
So I downloaded one, wiped everything, installed it via twrp, it apparently installed it correctly, rebooted the system and it went straight into recovery mode again. It's not letting me reboot into anything that isn't download or recovery. Any other ideas? Am I doing something wrong?
Click to expand...
Click to collapse
Uhm, so after doing that I flashed the latest twrp version (I had 3.0.2 or something), rebooted after flashing the image, did a wipe from there, rebooted and it now didn't boot into recovery mode but instead I'm now on a white screen with the samsung logo in the middle looping from light grey to black. I'll look into that I guess...
4tson said:
Uhm, so after doing that I flashed the latest twrp version (I had 3.0.2 or something), rebooted after flashing the image, did a wipe from there, rebooted and it now didn't boot into recovery mode but instead I'm now on a white screen with the samsung logo in the middle looping from light grey to black. I'll look into that I guess...
Click to expand...
Click to collapse
After it got stuck on the samsung logo I rebooted into recovery mode, flashed the custom rom once again, rebooted and it's still stuck on the samsung logo. Lost once more.
4tson said:
After it got stuck on the samsung logo I rebooted into recovery mode, flashed the custom rom once again, rebooted and it's still stuck on the samsung logo. Lost once more.
Click to expand...
Click to collapse
Go into twrp and go to wipe. Click advanced wipe and wipe system, internal, data, dalvik cache.
Then flash the ROM again and reboot
garylawwd said:
Go into twrp and go to wipe. Click advanced wipe and wipe system, internal, data, dalvik cache.
Then flash the ROM again and reboot
Click to expand...
Click to collapse
Tried this just now, it rebooted twice and on the second reboot it got stuck on the logo once again.
I think I'm done trying to mess around with it, I'll take it to a repair place :/
Thanks for looking out though, definitely appreciate your tips even if they didn't end up working out. :good:
4tson said:
After it got stuck on the samsung logo I rebooted into recovery mode, flashed the custom rom once again, rebooted and it's still stuck on the samsung logo. Lost once more.
Click to expand...
Click to collapse
https://forum.xda-developers.com/ga...nt/recovery-twrp-3-1-2-blue-dogerino-t3768707 Try flashing this recovery it's a newer version.Just download the .img file and install it through twrp as recovery when prompted.
4tson said:
So I downloaded one, wiped everything, installed it via twrp, it apparently installed it correctly, rebooted the system and it went straight into recovery mode again. It's not letting me reboot into anything that isn't download or recovery. Any other ideas? Am I doing something wrong?
Click to expand...
Click to collapse
Why would you try a ROM which has not been updated for months,get a recent one like Lineage OS just to try if it works,its also small in size.
DontTouchMaPhone said:
Why would you try a ROM which has not been updated for months,get a recent one like Lineage OS just to try if it works,its also small in size.
Click to expand...
Click to collapse
He wants to just enable USB debugging in devoloper options because he wants the stock firmware and his pc isn't recognising his phone because this option isn't enabled.
He has twrp so flashing any rom will do just to get into the phone and enable USB debugging so he can flash the stock firmware through odin
garylawwd said:
He wants to just enable USB debugging in devoloper options because he wants the stock firmware and his pc isn't recognising his phone because this option isn't enabled.
He has twrp so flashing any rom will do just to get into the phone and enable USB debugging so he can flash the stock firmware through odin
Click to expand...
Click to collapse
I understand why he is using a custom rom,I mean why did he try one that has not been updated for ages because maybe its the rom causing bootloop
DontTouchMaPhone said:
I understand why he is using a custom rom,I mean why did he try one that has not been updated for ages because maybe its the rom causing bootloop
Click to expand...
Click to collapse
Hey, so yeah, I was just looking for any rom, didn't really look for anything in particular, just got the first one I found in order to just get into the phone.
I ended up just taking it to a repair place after not having much luck myself, I don't know what exactly they did, but I now have that ROM flashed and I have access to the phone, I'm not sure if I want to try flashing either a different custom rom now, stock, or just sticking to this, since I'm sorta scared it will get messed up again and I'll have to go back to that repair place.
4tson said:
Hey, so yeah, I was just looking for any rom, didn't really look for anything in particular, just got the first one I found in order to just get into the phone.
I ended up just taking it to a repair place after not having much luck myself, I don't know what exactly they did, but I now have that ROM flashed and I have access to the phone, I'm not sure if I want to try flashing either a different custom rom now, stock, or just sticking to this, since I'm sorta scared it will get messed up again and I'll have to go back to that repair place.
Click to expand...
Click to collapse
Are you on stock now?
DontTouchMaPhone said:
Are you on stock now?
Click to expand...
Click to collapse
Nope, I'm on Extreme ux 8.0, which is what I downloaded to try to get into the phone to turn on the usb debugging option, the guy that repaired it must've noticed it was already on my SD card and flashed it without telling me.
Like I said, I kind of want to go back to stock but I'm sort of scared of touching it and having it get stuck again, I've kinda got used to this rom's little issues by now though I suppose.
4tson said:
Nope, I'm on Extreme ux 8.0, which is what I downloaded to try to get into the phone to turn on the usb debugging option, the guy that repaired it must've noticed it was already on my SD card and flashed it without telling me.
Like I said, I kind of want to go back to stock but I'm sort of scared of touching it and having it get stuck again, I've kinda got used to this rom's little issues by now though I suppose.
Click to expand...
Click to collapse
Wait,so you paid for the repair right?And he flashed you a custom rom?Looks pretty scammy to me..Anyways do you have twrp or stock recovery?

Categories

Resources