[Help] So, I soft-bricked my Galaxy Tab 4 SM-T230NU - Galaxy Tab 4 Q&A, Help & Troubleshooting

After trying to install a custom firmware with TWRP, I ran into a soft brick. My device boots up and can go into download mode. I've tried every possible method to unbrick it such as; Kies, Smart Switch, and Odin
None of these have seemed to work. I always get an error, even in Odin. It's always stuck on "Setup Connection"
Can someone please point me in the right direction?

Related

[Q] Bootlooped my phone :(

I have a Verizon Samsung Galaxy S4 (SCH-I545) which I previously rooted via the Open1Your1Eyes0 pwn script. Everything was great except I wanted to update to the latest version and my phone failed with each attempt. I tried to unroot it using Odin to flash the VRUAMDK_NoWipe.tar.md5 stock ROM image.
That failed and now it's stuck on the ODIN MODE "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." message screen. The phone won't boot. If I hold Vol Down I can still go to the Downloading firmware screen, but I've tried flashing 3 other stock ROM's and nothing will work.
Any suggestions?
You are in the wrong forum. You need to go the verizon part.

[help] "firmware upgrade encountered an issue"

I was trying to install an Official Stock Samsung Galaxy S4 GT-I9505 firmware, from SAMMOBILE Link for the firmware I tried to use: http://www.sammobile.com/firmwares/3/?download=26516. So while flashing it with ODIN, I think it just randomly disconnected, but that just bricked my phone. I don't know whether it is a soft brick or a hard brick, but this is what happens to my phone, every time I turn on my phone whether it's done normally, the download mode or recovery mode method I will be stuck on that screen.
So now I typed in the error on Google to see how it can be fixed. Link to the method to fix the error: http://androidcentral.us/2013/09/how-to-fix-firmware-upgrade-encountered-an-issue-on-kies/
Firstly, my computer (running Windows 7 ULTIMATE 64-BIT) can detect my phone, saying the drivers have been installed successfully. However KIES doesn't detect mine. Anyways I still try to do this method where I have to go to Tools -> Firmware Upgrade and Initialization on KIES. I type in my model name: GT-I9505, that works, now I have to do my S/N or Serial Number: RF1DXXXXXXX, so when I press OK it says GT-I9505 doesn't support 'Intialising', so I am stuck have no idea what to do.
Also, while flashing I tried repartition my S4, to remove all of the stuff I had, none important, except my music which I transferred to my PC. Solved, just flashed Official firmware, it now works.
Just separately repartitioned my S4, it works but S4 is now stuck on boot loop, so have to flash a 4.4.2 Official Firmware.
Harnessful said:
I was trying to install an Official Stock Samsung Galaxy S4 GT-I9505 firmware, from SAMMOBILE Link for the firmware I tried to use: http://www.sammobile.com/firmwares/3/?download=26516. So while flashing it with ODIN, I think it just randomly disconnected, but that just bricked my phone. I don't know whether it is a soft brick or a hard brick, but this is what happens to my phone, every time I turn on my phone whether it's done normally, the download mode or recovery mode method I will be stuck on that screen.
So now I typed in the error on Google to see how it can be fixed. Link to the method to fix the error: http://androidcentral.us/2013/09/how-to-fix-firmware-upgrade-encountered-an-issue-on-kies/
Firstly, my computer (running Windows 7 ULTIMATE 64-BIT) can detect my phone, saying the drivers have been installed successfully. However KIES doesn't detect mine. Anyways I still try to do this method where I have to go to Tools -> Firmware Upgrade and Initialization on KIES. I type in my model name: GT-I9505, that works, now I have to do my S/N or Serial Number: RF1DXXXXXXX, so when I press OK it says GT-I9505 doesn't support 'Intialising', so I am stuck have no idea what to do.
Also, while flashing I tried repartition my S4, to remove all of the stuff I had, none important, except my music which I transferred to my PC.
Just separately repartitioned my S4, it works but S4 is now stuck on boot loop, so have to flash a 4.4.2 Official Firmware.
Click to expand...
Click to collapse
Hi,
Can you get into recovery?
Can you still see your phone in odin?
If so , disable kies (task manager) and try to flash the firmware again.
Wipe data and cache before and after flashing firmware.

[Q] Samsung tab 4 wifi. please help?

It first started with my trying to fix my wifi. I used odin to try and root I downloaded cf-root I messed up the device and it is on samsung logo. I cannot get to the recovery mode. I can only get to download mode for odin. I cannot enter safemode. Please help!!! I solved the boot with odin a new firmware. but need help with wifi.

My Galaxy S5 appears to be unflashable/unrootable, any advice?

Hi,
I recently got me a Galaxy S5 (SM-G900F) and the first thing i wanted to do was installing CM13 as I always do with my new phones. However, when i followed te steps on CM wiki using Heimdall to flash TWRP the blue bar of the downlaod mode increases a small bit, then stops and in the command promt it says something about error with finding PIT. After trying this for three times i decided to go with Odin, which I do prefer anyways.
I tried flashing TWRP , the blue bar is filling to 100% but then on the little screen where Odin usually states FAIL! or PASS! it just says RESET! and my phone is restarting. Shortly after it restarded you can see the RESET! turning to PASS!, but when I tried checking in TWRP is installed, it wasn't. I tried it again and then Odin suddenly says FAIL! After restarting my phone it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I couldnt even enter download mode anymore till I tried if getting out the battery would work. I could enter download mode again and flashed the same TWRP on my phone again, and aigain it says RESET! but after that my phone worked again. I tried flashing with another version of Odin and TWRP but same thing happened - First run it said RESET!, second run FAIL!.
I thought maybe rooting the device and installing TWRP via their app afterwards could do the trick. So i tried flashing Autoroot with Odin but it made my phone showing a screen with Samsung logo and in the upper left corner something about recovery mode, seemed to be a loop/freeze. So i took out the battery again and flashed TWRP and that solved the problem again. At last I tried rooting by using TowelRoot but it says the service is not available for my device, even though S5 is listed as a supported device.
I really have no idea what to do anymore, would be very grateful if someone could come up with a solution.
BTW: Is it possible to flash CM13 without using custom recovery by using stock recovery?
Greetings
Khalitas
Khalitas said:
Hi,
I recently got me a Galaxy S5 (SM-G900F) and the first thing i wanted to do was installing CM13 as I always do with my new phones. However, when i followed te steps on CM wiki using Heimdall to flash TWRP the blue bar of the downlaod mode increases a small bit, then stops and in the command promt it says something about error with finding PIT. After trying this for three times i decided to go with Odin, which I do prefer anyways.
I tried flashing TWRP , the blue bar is filling to 100% but then on the little screen where Odin usually states FAIL! or PASS! it just says RESET! and my phone is restarting. Shortly after it restarded you can see the RESET! turning to PASS!, but when I tried checking in TWRP is installed, it wasn't. I tried it again and then Odin suddenly says FAIL! After restarting my phone it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I couldnt even enter download mode anymore till I tried if getting out the battery would work. I could enter download mode again and flashed the same TWRP on my phone again, and aigain it says RESET! but after that my phone worked again. I tried flashing with another version of Odin and TWRP but same thing happened - First run it said RESET!, second run FAIL!.
I thought maybe rooting the device and installing TWRP via their app afterwards could do the trick. So i tried flashing Autoroot with Odin but it made my phone showing a screen with Samsung logo and in the upper left corner something about recovery mode, seemed to be a loop/freeze. So i took out the battery again and flashed TWRP and that solved the problem again. At last I tried rooting by using TowelRoot but it says the service is not available for my device, even though S5 is listed as a supported device.
I really have no idea what to do anymore, would be very grateful if someone could come up with a solution.
BTW: Is it possible to flash CM13 without using custom recovery by using stock recovery?
Greetings
Khalitas
Click to expand...
Click to collapse
RESET! is basically the same thing as PASS! What version of TWRP are you installing? The keis screen you got is the same as download mode. Why are you using heimdal? your idea to go with Odin was a good one. Anyways, download TWRP 3.0.2 (not 3.0.2-1 or 3.0.2-2 as they are buggy) and flash it in Odin, reboot to recovery and install the ROM you like, of course following its specific install instructions. No, you cant install a custom rom with stock recovery
Thanks for your answer, meanwhile i managed to fix this problem. Had to flash the latest Firmware because twrp (could just install the oldest version otherwise I had no option to boot into recovery at all) said no OS installed. After rooting via Odin worked like it's supposed to.
Why did I use Heimdall? Because I wanted to stick to CM-wikis instruction and they used Heimdall.

Galaxy S5 SM-G900W8 failed to root

Hey guys,
I tried to root my gf's S5 with CF-AutoRoot's package. I got this for the specific version which I double-checked
Included in the package was Odin and the image with an "installer".
Everything was fine, device detected in Odin, selected image in AP and let it rip... Except I got an error after it was in the process, under UDC start, can't remember exactly as I had restarted the device with the loading bar at like 30% of the way... it stated something dev_state
After I restarted, I got the "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
I would've thought it was going to be pretty straight forward and decided not to do a backup but I'm so getting killed if I'm going to lose the data!!!
Any insight? thanks
I tried to get Samsung Kies for the recovery but under the list of devices requiring emergency recovery it won't detect it...
I managed to retry the Odin flash with the same outcome.
The error message is unsupport dev_type if that makes any sense to someone
Well issue seems to have fixed itself by flashing latest TWRP... The Odin flash went smooth and phone booted normally...
must've been something off with the AutoRoot

Categories

Resources