I cannot access the recovery mode - Nexus 10 Q&A, Help & Troubleshooting

I cannot access the recovery mode
I tried:
- Power off your Nexus 10, and reboot it into fastboot mode by holding the volume up button, volume down button and power button.
No success, the tablet vibrates but stop in the black screen.
And by adb no sucess too.
- adb reboot bootloader
The Nexus 10 off, but does not start the recovery mode, stop in the black screen.
Official 5.1.1
Someone has an idea to fix it?

Related

Start in Recovery

Does anyone now how to start this thing in Recovery
I can get fasboot and download mode by holding power and volume down
but thats all

I have an issue with enterind fastboot/bootloader on my LeTV/LeEco Le1 Pro.

Hello, i'm trying from a few days to install TWRP and Custom Rom on my LeTV Le1 Pro, but unfortunately i still cant get in bootloader mode. When using the command from the ADB "adb reboot bootloader" or just the simple combination of the keys - Volume down+power button, i've got the Linux Penguin for around 5 seconds and after that the phone vibrates and start as normal he should do when pressing only the power button.
Facing the same problem here
Some one plz help, I'm facing the same problem here
After you press the vol - and off the ? shos, then hold vol + and off and you will enter recovery mode (if twrp is installed).

Unable to access Recovery Mode - Lenovo Yoga Tab 3 YT3-850F

Part way through rooting the tablet I try and boot into recovery mode but it just displays pink/blue pixels and lines. Is there a way to reset the process and get access to recovery mode?
It sounds like you are stuck in the hardware test mode not recovery. Just hold the vol + and pwr at the same time until you see the Lenovo logo and let go. This should boot you into recovery. Alternatively, vol - and pwr gets you to fastboot which you can reboot using the fastboot reboot commands.
TomorrowSpace said:
It sounds like you are stuck in the hardware test mode not recovery. Just hold the vol + and pwr at the same time until you see the Lenovo logo and let go. This should boot you into recovery. Alternatively, vol - and pwr gets you to fastboot which you can reboot using the fastboot reboot commands.
Click to expand...
Click to collapse
Won't boot to recovery, just has a pixelated screen. It will however boot normally. I've done a factory reset and tried to do a system update but it bots to a pixelated screen again.

stuck in BootLoop

Hello i installed on my Rooted and Bootloader Unlocked Oneplus 6t the pixlify module
Then i clicked restart and now i can only see the Dark Google Boot animation
I Already Tried :
Turning off (restart) while pressing power and volume up to go intop Recovery (TWRP)
Its just not working i cant get into twrp
What happens Exactly after i pressed : power and volume up
Phone restarts
I see the Bootloader Warning
And then again the Boot Animation
Volume up + Power combination boots into bootloader not recovery, recovery combination is Volume down + Power.
Anyway you can't even boot to bootloader? Or it restarts after booting to bootloader?
XDHx86 said:
Volume up + Power combination boots into bootloader not recovery, recovery combination is Volume down + Power.
Anyway you can't even boot to bootloader? Or it restarts after booting to bootloader?
Click to expand...
Click to collapse
So i am in the BootAnimation and If i press volume down and power its just restarts normaly and same with volume up and power
Tinx_LD said:
So i am in the BootAnimation and If i press volume down and power its just restarts normaly and same with volume up and power
Click to expand...
Click to collapse
You need to delete this module, you shouldn't install any magisk module without reading what they do or how they work.
It's perfectly stated in the repo that pixelfy isn't for OOS (Oxygen OS).
You need to boot into TWRP recovery, If your device is detected on your PC try adb reboot recovery
Or if it's detected in fastboot/bootloader then use fastboot boot twrp.img (Replace twrp.img with your image location and name)
If it's not detected try fastboot continue (You may have to spam this command for a couple of times)
Note: To run these commands you may want to install your device specific driver and adb tools. You can get the driver from here.
If you successfully booted into TWRP then flash pixelify zip again to completely uninstall it.

How to entering recovery mode without volume button?

Hi, my Oneplus 6T's volume up and down button was broken. Only power button works. Now my phone get bootloop and I can't access recovery / fastboot mode.
In this case, how to entering recovery mode or fastboot without power + volume combination key?
Thank you
adb reboot recovery or adb reboot fastboot but if button was broken , they must not press , bootloop is may be the consequence of buttons that remain pressed
Thank you. Finally, I repaired the volume button

Categories

Resources