Related
Hi everyone,
It's my first post here - most likely not to be my last. Oh, and i know i spelt HSDPA wrong in the title!
I very very recently (yesterday in fact) managed to get hold of my T-Mobile Hermes (one of the .37 batch) and am having no problems whatsoever with the phone, the only problem i am having is getting any web download speeds faster than around 40kbps?
I phoned T-Mobile yesterday and after being on hold twice and explaining myself many times i think i got HSDPA enabled as the lady (who was very nice) said she promises it has been enabled for me. I tried half hour later and sure enough, i used www.dslreports.com/mspeed and could now download at around 800kbps - perfect! Unfortunately i tried again this morning and it says 40kbps again
Is there any way to tell whether HSDPA has been enabled on my phone before i call T-Mobile again? Does HSDPA just run over 3G? I haven't got a brilliant signal where i am - usually 1 or 2 bars, could this be what is affecting my download speed? I need some help!
Just realised i have spelt HSDPA wrong in the thread title - never mind! Can anyone help?
Have you read this dude?
http://forum.xda-developers.com/showthread.php?t=276154&page=5
Theres a couple of files you can check you have i believe, also the Fit4cat program is worth downloading.
40kbps is GPRS data speed. Even without HSDPA you should get 300kbps on UMTS.
Your phone will show a U or a G depending on which network you are on.
It shows a "G" all the time in a little white block next to the signal bar, and sometimes the signal bar shows an antenna and sometimes a "G" also - does that mean when im on the "G" ill be on HSDPA and when im on the antenna (if i cant get 3G) ill be on GPRS 40kbps?
If so that makes a lot of sense as the signal is not brilliant round here, i went shopping in a much bigger town this afternoon and tested again -> full signal and downloading at around 1200kbps! Obviously it is enabled, think its just down to my signal....
Does that sound about right?
RTFM, the G is for GSM ie data will be GPRS.
You will either have a 3G or U depending on what ROM you're running for 3G/UMTS/HSDPA .
I'll be honest i only got half way through the quick start guide before i started playing with it. So, if my phone is always on "G" i'll assume i need to try and unlock it using the fit4cat thing? As T-Mobile have said they have enabled HSDPA on my account?
How did i get 1200kbps on GPRS by the way? It definately said "G" when i was connected and did the speed test...?!
I just ran the fit4cat Hermes tweaker and still no luck, it only connects to "G" rather than "3G", 3G is apparently available in this area so why does it only connect to G? Im confused and would really appreciate some advice...
Well if you probably didn't notice the U (or whatever) when you got 1mbps once it. This means that HSDPA is enabled on your phone and SIM.
The fit4cat tweaker only (dis)enables HSDPA but that isn't an issue because even without HSDPA you would be getting UMTS speeds.
One thing you could try is. Go to Start->Settings->Phone->Band set GSM/UTMS to GSM900+1800 + UMTS2100
You could also try a manual search for networks from Start->Settings->Phone->Networks->Find Network
Finally you can also disable GSM totaly using network type in the band selection and see if you get a steady 3G signal.
Thanks for your suggestions, here are my findings:
kevino said:
Well if you probably didn't notice the U (or whatever) when you got 1mbps once it. This means that HSDPA is enabled on your phone and SIM.
Click to expand...
Click to collapse
Good point, i have a long drive home tonight so will check when going through built up areas to see if it connects to 3G or U then.
kevino said:
One thing you could try is. Go to Start->Settings->Phone->Band set GSM/UTMS to GSM900+1800 + UMTS2100
Click to expand...
Click to collapse
Tried this, and phone disconnected then reconnected but still said "G" when connecting to Internet. Set back to "Auto".
kevino said:
You could also try a manual search for networks from Start->Settings->Phone->Networks->Find Network
Click to expand...
Click to collapse
Did this also, it pops up with the message "Registering on the network" and disappears and thats it, nothing happens.
kevino said:
Finally you can also disable GSM totaly using network type in the band selection and see if you get a steady 3G signal.
Click to expand...
Click to collapse
I cannot find an option to disable GSM in the Band tab, i have the following:
Select your network type.
__Auto
__GSM
Select your GSM/UMTS band.
__GSM(900+1800)+UMTS(2100)
__GSM(1900+850)+UMTS(1900+850)
and thats about it. Cannot find anything that would let me not use GSM whatsoever? I appreciate your help so far
It may be the case that your reception for 3G just isnt adequate enough to work where you live, O2 states there is reception in the area where i live but i only tend to get UMTS upstairs....just one of those things....here at uni i get FULL UMTS reception anywhere.
richieboy said:
I cannot find an option to disable GSM in the Band tab, i have the following:
Select your network type.
__Auto
__GSM
Click to expand...
Click to collapse
In the dopod ROM it has a WCDMA option too. No big deal !
Seting the band was just so that the phone doesn't bother looking for bands that are not available in this country. To try and encourage it to check the correct UMTS band more quickly.
My suggestion to use find network (you need to select manual search) in Networks wasn't too helpful anyway as it doesn't list the band. So no use unless you can disable GSM.
Of course you may have got a spurious speed test result. How old is your SIM? It needs to be a USIM
Yes firstly is your SIM card a USIM....or is it a SIM card from an old handset?? I think youve already said you have had the 'U' appear on your TyTN at some point.....so again im going with the assumption you just dont have adequate UMTS reception for it to work....hence why you are only seeing 'G'.
So, funny story...
It seems where i was over the weekend (girlfriends) is borderline, so as mentioned aboved i can get 3G upstairs but not downstairs - i decided to drive around and got 3G all over the place...the best news is i get 2/3 bars of 3G at home too!
Problem solved, im an idiot - but hey, it doesn't hurt to ask right?
680kbps! Woo
richieboy said:
So, funny story...
It seems where i was over the weekend (girlfriends) is borderline, so as mentioned aboved i can get 3G upstairs but not downstairs - i decided to drive around and got 3G all over the place...the best news is i get 2/3 bars of 3G at home too!
Problem solved, im an idiot - but hey, it doesn't hurt to ask right?
680kbps! Woo
Click to expand...
Click to collapse
girlfrends! Woo
On my news Nexus S I am only getting and showing 3G with poor connection whether I use Chung-Hwa Telecom or Taiwan's Far Eastone. On my HTC Desire when downloading or uploadinging it would show an "H" up on top and show "3G" if connection was not all that great but with this new Nexus S all I get is 3G. What's up with this? Reception is also worse than the HTC Desire.
Because nexus s only gets 3g
Sent from my Nexus S using XDA App
kjy112 said:
Because nexus s only gets 3g
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Here I see it showing it gets HSDPA.. From what I understand is the 2100 Band in Taiwan is not just 3G
http://www.gsmarena.com/compare.php3?idPhone1=3620&idPhone2=3077
It gets HSDPA also, it just doesn't change icons like cyanogen or like the static H on the G2. It wasn't a widely used icon in america until the networks (T-mobbile and AT&T) upgraded to HSDPA or HSPA+.
It is capable of 7.2mbps download.
You could always check the status of the phone under settings to see what connection you have or wait until cyanogenmod comes out for the nexus s, not just the alpha version.
ya HSPA is still 3G with a max download speed of 7.2 HSPA+ depending on device ranges from like 14.4 to 42
KnightMAREcrow said:
It gets HSDPA also, it just doesn't change icons like cyanogen or like the static H on the G2. It wasn't a widely used icon in america until the networks (T-mobbile and AT&T) upgraded to HSDPA or HSPA+.
It is capable of 7.2mbps download.
You could always check the status of the phone under settings to see what connection you have or wait until cyanogenmod comes out for the nexus s, not just the alpha version.
Click to expand...
Click to collapse
Mobile Network Type
UMTS
Signal Strength
-101 dBm 4asu
Now answered in the stickied FAQ in the Q&A section.
unremarked said:
Q: The Nexus S only gets 3G? Omg, I only see a 3G icon!
The Nexus S gets UMTS and HSDPA, which are both technically 3G. Your phone idles on UMTS 3G, and when it starts downloading/uploading, it'll flip to HSDPA after a few moments. You can see this by typing *#*#4636#*#* into your Dialer, going to Phone Info, and looking at Network Type while downloading something. The ability to switch the icons on the notification bar is something that was added in custom ROMS, and is not supported by the stock ROM. Rest assured, if you are on a network that uses the 3G bands the Nexus S supports, then you are recieving HSDPA regardless of what icon you see.
Click to expand...
Click to collapse
EDIT: Also, in the future, use search and look at that FAQ prior to starting a new thread, mate. This has been asked a bajillion times.
unremarked said:
Now answered in the stickied FAQ in the Q&A section.
EDIT: Also, in the future, use search and look at that FAQ prior to starting a new thread, mate. This has been asked a bajillion times.
Click to expand...
Click to collapse
Question,
I always wondered, never really bothered asking, what should the setting be "preferred network type" by default my NS shows GSM/CDMA auto (PRL)
slowz3r said:
Question,
I always wondered, never really bothered asking, what should the setting be "preferred network type" by default my NS shows GSM/CDMA auto (PRL)
Click to expand...
Click to collapse
Found this for ya:
loganss said:
WCDMA preferred - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 3G is favored more.
GSM only - The GSM phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
WCDMA only - The GSM phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM auto (PRL) - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more. This one is a bit confusing to me since PRL is associated mostly with CDMA technology and not GSM technology.
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA only - The CDMA phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
EvDo only - The CDMA phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM/CDMA auto (PRL) - Some phones are equipped with both GSM and CDMA capabilities. This setting appears to just have the phone attempt to stay connected to the data communication type that works the best. (Maybe the Samsung Galaxy S will take advantage of this???)
Unknown - If none of the above fit or the phone is acting weird as far as connecting to the carrier, you will see your preferred network type is set to this
Click to expand...
Click to collapse
Source: http://www.google.com/support/forum/p/android/thread?tid=6a327a95211ac789&hl=en
unremarked said:
Found this for ya:
Source: http://www.google.com/support/forum/p/android/thread?tid=6a327a95211ac789&hl=en
Click to expand...
Click to collapse
Still sorta understood all that, so should I just leave it where Im at, i mean it is what came with the phone stock after all
As was stated, when an active data connection is formed and there is activity then the status will change under settings. I have an attached screenshot for your viewing pleasure.
slowz3r said:
Still sorta understood all that, so should I just leave it where Im at, i mean it is what came with the phone stock after all
Click to expand...
Click to collapse
PRL is preferred roaming list, iirc. When searching for a network, it'll get preference to those that are on the list over those that aren't. Supposed to be battery savings.
unremarked said:
PRL is preferred roaming list, iirc. When searching for a network, it'll get preference to those that are on the list over those that aren't. Supposed to be battery savings.
Click to expand...
Click to collapse
fair enough
I'm noticing this too. I get full HSDPA in the US on AT&T, but when I came to Taiwan and plugged in my prepaid sim for Taiwan Mobile which clearly has 7.2mbps HSPDA in this city, I only get the "3G" icon.
I did do the *#*#INFO#*#* to set my band to Euro which was how data kicked in. But otherwise it only shows "3G." Readingt he posts above, people say it idles on UMTS, but I have AT&T at home and it always shows the H icon. I can never the the H icon in Taiwan.
I have the 9020a which has 850/1900/2100, so I'm not understanding whats going on... Is the lack of 900 3G band hurting me?
Edit: I've been using this phone for 7 months on AT&T now and I just arrived in Taiwan last night....
正常啊。在 系統設定 - 關於手機 - 狀態 裡,看到 行動網路類型,會顯示為 hsdpa。這就是3.5g h了。雖然訊號顯示為3g,實際在支援hsdpa的地方會使用hsdpa的。
我是大陸的,語言可能不太好理解,見諒。
Have searched the entire forum for this to no avail. I want to disable HSDPA and only enable 3G. This was a straightforward process on my SGS. Assistance appreciated.
/h2
HSDPA is the only 3G standard that the phone supports, as far as I understand. So as far as the Desire HD goes, they're the same thing.
I am on t-mobile in th UK. My dhd switches between showing a G or H on the top line. If I go into settings, about phone, network, mobile network type. It shows either gprs, udms or hsdpa depending on signal type available. The phone supports edge too and can show an E on the too line but T-Mobile uk don't appear to support this.
Not sure how you could limit it but t-mobile have done this for some,contracts as reports elsewhere of download speeds capped at 384kbs I.e. max rate for 3G rather than the 2mbs+ I have seen on mine. Seems to be,contracts bought through resellers that don't include data and they use the free booster to provide the data element.
Hth
I am on T-Mob in the UK too. I get either G (GPRS) 3g (3g) or H (HSDPA) not seen an E yet and I have had it since October.
Mine switched between 3G and H on its own accord, there is no toggle that I know, think it depends on where you are and the mast you are connected to at the time?
noisy_lightning said:
I am on T-Mob in the UK too. I get either G (GPRS) 3g (3g) or H (HSDPA) not seen an E yet and I have had it since October.
Mine switched between 3G and H on its own accord, there is no toggle that I know, think it depends on where you are and the mast you are connected to at the time?
Click to expand...
Click to collapse
I get E every now and then but mostly when my phone switches from orange to the T-Mobile network.
Sent from my Desire HD using XDA App
It depends on where you are and the signal strength your getting, why you would want to disable HSDPA is beyond me, it is the fastest you can get on your desire hd, E being the slowest (edge) then G, 3G, then H.
Why would you want to make your device slower?
Very weird, but anyway, as far as i know you can only toggle between 2g and 3g which will incorporate HSDPA as well.
Hope this helps.
dladz said:
It depends on where you are and the signal strength your getting, why you would want to disable HSDPA is beyond me, it is the fastest you can get on your desire hd, E being the slowest (edge) then G, 3G, then H.
Why would you want to make your device slower?
Very weird, but anyway, as far as i know you can only toggle between 2g and 3g which will incorporate HSDPA as well.
Hope this helps.
Click to expand...
Click to collapse
HSDPA consumes more battery. My SGS used to support Edge, 3G and HSDPA too with an option to disable HSDPA and and allow 3G and Edge only.
Thanks for all your replies guys.
/h2
Download Advanced Settings app, go into phone info and there are some options there. Can't remember which is which though, there is a thread in here somewhere about the settings
Sent from my Desire HD using XDA App
E is much slower than 3G
ww2916269 said:
E is much slower than 3G
Click to expand...
Click to collapse
Who was telling otherwise?
For Using only 3G or HSPA
Settings->Wireless &Networks->Mobile Networks->Network Mode->select WCDMA only.
Here according to your preference change between UTMS(or WCDMA) or GSM(2G).
Also to clarify speeds
G<E<3G<H.
So i finally got my nexus 4 and I'm on T-Mobile network and noticed that at work i notice my signal is constantly switching from H (HSDPA+) and E (edge). It's kind of annoying since edge data is very slow. Is this a common issue with the n4? When i get H signal, i have two bars so i don't think it is being boarder line signal. Please let me know, really hope i don't have to return this sweet phone!!!!
Are there any updated radios yet that i can try? I know with Vzw galaxy nexus radios helped a lot with 1x/3g/4g switching.
Sent from my Galaxy Nexus using Tapatalk 2
Any info on this? I know what the symbols stand for, however why can't this hold a strong HSPA signal for more than a minute without switching to edge even if the signal is 2 bar? Doesn't seem right
check your APN's
bradm23 said:
Any info on this? I know what the symbols stand for, however why can't this hold a strong HSPA signal for more than a minute without switching to edge even if the signal is 2 bar? Doesn't seem right
Click to expand...
Click to collapse
It happens to me as well but its not just my nexus 4. It happens to my iPhone and my brothers HTC one v. Its just that we have decent to bad signal at home. Signal gets spotty sometimes.
So if you're at home just use WiFi and leave data off.
Sent from my Nexus 4 using Tapatalk 2
famoustito said:
check your APN's
Click to expand...
Click to collapse
Thanks for the reply, any info how how to change the apns and what the best ones would be? I have been reading many people say their n4 idles with 3g and then ramps up to hspa when it calls for data usage. Mine doesn't act like this and just randomly drops to edge
Mine stays on 3g and only switches to H+ when I use data (custom rom icons). I think its normal
There is an app that takes you into the menu where you can choose network types, this is what is used to turn on LTE. Go in and put it to WCDMA Only, that should make it stay only on H+ and not go to Edge.
Play Store Link
link is not working
Dark lord me said:
There is an app that takes you into the menu where you can choose network types, this is what is used to turn on LTE. Go in and put it to WCDMA Only, that should make it stay only on H+ and not go to Edge.
Play Store Link
Click to expand...
Click to collapse
moldovanos said:
link is not working
Click to expand...
Click to collapse
You can just dial *#*#4636#*#* and it'll take you to that exact menu.
closedcircuit said:
You can just dial *#*#4636#*#* and it'll take you to that exact menu.
Click to expand...
Click to collapse
If I try to go into the settings>Select Radio my com.android.phone FCs is there a way around that?
I am on stock 4.2.1
Hello, i live in a relatively small town where my service provider has very poor 4G signal. but pretty good 3G signal. With the Axon 7 i have a lot of signal problems that i didnt have with any of my previous phones, where outdoor signal is pretty bad and indoor signal is almost unusable. It also connects almost exclusively to 4G, and in contrast all of my previous phones connected almost exclusively to 3G. Over the last weekend i traveled to a major city where my service provider has very strong 4G signal, and the signal problem was almost non existant. I even had signal in places where other people with the same service provider did not. So my theory is the following, assuming that the hardware (antenna) used for 4G and 3G is the same, it may not be a hardware problem, but a problem with the software having a hard time knowing which band/signal it should connect to. It seems that in my case it prioritizes 4G signal and the cost of a VERY unstable cellphone service. This is also assosiated with the fact that when it connects to 3G (incredibly rare), the phone goes inmediately from 1/2 bars to 4/5 bars. I also changed the SIM configuration to leave LTE out, but either for a visual bug or a software bug, it keeps connecting only to 4G. So could this be the problem that me and a lot of people in low 4G signal zones are having? Is there anyway i can force the phone to connect exclusivly to the 3G signal to test if that is indeed the problem?
Regards!
Nehuen said:
Hello, i live in a relatively small town where my service provider has very poor 4G signal. but pretty good 3G signal. With the Axon 7 i have a lot of signal problems that i didnt have with any of my previous phones, where outdoor signal is pretty bad and indoor signal is almost unusable. It also connects almost exclusively to 4G, and in contrast all of my previous phones connected almost exclusively to 3G. Over the last weekend i traveled to a major city where my service provider has very strong 4G signal, and the signal problem was almost non existant. I even had signal in places where other people with the same service provider did not. So my theory is the following, assuming that the hardware (antenna) used for 4G and 3G is the same, it may not be a hardware problem, but a problem with the software having a hard time knowing which band/signal it should connect to. It seems that in my case it prioritizes 4G signal and the cost of a VERY unstable cellphone service. This is also assosiated with the fact that when it connects to 3G (incredibly rare), the phone goes inmediately from 1/2 bars to 4/5 bars. I also changed the SIM configuration to leave LTE out, but either for a visual bug or a software bug, it keeps connecting only to 4G. So could this be the problem that me and a lot of people in low 4G signal zones are having? Is there anyway i can force the phone to connect exclusivly to the 3G signal to test if that is indeed the problem?
Regards!
Click to expand...
Click to collapse
Without knowing which model Axon 7 you are using, where you are using it, and who your provider is, there is little anyone can do to help you. All I can say is that it helped me A LOT to go into settings and turn off
VoLTE.
tabletalker7 said:
Without knowing which model Axon 7 you are using, where you are using it, and who your provider is, there is little anyone can do to help you. All I can say is that it helped me A LOT to go into settings and turn off
VoLTE.
Click to expand...
Click to collapse
U model last update, using it from Argentina, and the provider is Claro. I have LTE disabled in SIM confg as i already said and VoLTE turn of as well but the phone keeps connecting to 4G no matter what i do, even if i configure it to only GSM
I don't think its a matter of position or provider (version could be if different software is provided), but a general issue with the phone and band/signal interpretation coupled with the apparent innability to go off 4G
Refards!
Nehuen said:
U model last update, using it from Argentina, and the provider is Claro. I have LTE disabled in SIM confg as i already said and VoLTE turn of as well but the phone keeps connecting to 4G no matter what i do, even if i configure it to only GSM
I don't think its a matter of position or provider (version could be if different software is provided), but a general issue with the phone and band/signal interpretation coupled with the apparent innability to go off 4G
Refards!
Click to expand...
Click to collapse
ok when it connects to LTE it says "4G LTE". The 4G that you are getting is probably HSPA or something. And we had someone on here a few months back using Claro in Argentina and they had to seek answers from their Claro
tabletalker7 said:
ok when it connects to LTE it says "4G LTE". The 4G that you are getting is probably HSPA or something. And we had someone on here a few months back using Claro in Argentina and they had to seek answers from their Claro
Click to expand...
Click to collapse
If "4G LTE" is 4G and "4G" is HSPA, when only a "G" appears, what band am i connecting too? Its still pretty weird that im having major signal issues in my town, but when i go to a big city my signal is even better than other phones, it seems inconsistent with the whole "bad hardware" theory. I talked to Claro and it seemed like from their end it was a non issue, can you point me to the thread to see if he got it fixed somehow?
Regards!
Nehuen said:
If "4G LTE" is 4G and "4G" is HSPA, when only a "G" appears, what band am i connecting too? Its still pretty weird that im having major signal issues in my town, but when i go to a big city my signal is even better than other phones, it seems inconsistent with the whole "bad hardware" theory. I talked to Claro and it seemed like from their end it was a non issue, can you point me to the thread to see if he got it fixed somehow?
Regards!
Click to expand...
Click to collapse
/Trolling a bit/
I'm always LMAO when I hear US people talking about that 4G scam (which is H+ for real btw)
G is for 2G
E is for 2G+
3G is 3G
H is 3G+
H+ is 3G++ (an intermediary protocol up to 42MBps)
4G is LTE (up to 150Mbps in the EU most of the time)
4G+ is LTE-A (which is available in most of the EU, SK & JP) - up to 600Mbps, 200MBps in most tests
I've not heard of an app that could modify the way the phone "clings" to 4G LTE, since that might likely be the modem firmware doing it on its own.
RedWave31 said:
/Trolling a bit/
I'm always LMAO when I hear US people talking about that 4G scam (which is H+ for real btw)
G is for 2G
E is for 2G+
3G is 3G
H is 3G+
H+ is 3G++ (an intermediary protocol up to 42MBps)
4G is LTE (up to 150Mbps in the EU most of the time)
4G+ is LTE-A (which is available in most of the EU, SK & JP) - up to 600Mbps, 200MBps in most tests
I've not heard of an app that could modify the way the phone "clings" to 4G LTE, since that might likely be the modem firmware doing it on its own.
Click to expand...
Click to collapse
Then this is even weirder, because is G is not 3G, but 2G it means that the phone NEVER connects to the major band that all of my previous phones and Claro users connect to. Is there anyway to force to only connect to 3G?
Regards!
i have the G european model, in my town i have bad lte signal 1/2bar, when with my previously xiaomi mi4c was got 4/5 bars (maximum). In the big town i have got in the most of cases 4/5 bars. I think the "signal problems" are relatives of a lack of somehow software. i told this because i've read with the china model with the last updates an improvement of the signal reception of the phone.
Nehuen said:
Then this is even weirder, because is G is not 3G, but 2G it means that the phone NEVER connects to the major band that all of my previous phones and Claro users connect to. Is there anyway to force to only connect to 3G?
Regards!
Click to expand...
Click to collapse
You can however force a specific protocol indeed, but you will lack the ability to autoswitch networks. Just download 4G LTE Switch (here) which is a glorified secret code dialer. Just click on prefered network and change at your convenience (4G LTE only, WCDMA only - H+ - and so on). Remember that if you force 4G LTE in an area in which you have no coverage, you won't have internet, and no 2G/3G fallback (so no texts, no calls)
I don't know if this is the same problem, but my wife has an iPhone 6+ and I have an A2017U on B29 stock root. We both use the same network (Movistar Mexico) and while her iPhone often registers LTE, my A7 often registers 4G or even E in the same place. The A7 is receiving the same bands but appears to be "choosing" or locking into the slower protocols more often.
EDIT: NEVER MIND… an xposed module was messing with my network settings. Fixed it. Now I get LTE right away.
nuserame said:
EDIT: NEVER MIND… an xposed module was messing with my network settings. Fixed it. Now I get LTE right away.
Click to expand...
Click to collapse
Which module?
What if flash any Custom OS?Would it give better signal ?