After Flashing stock ROM of canvas A120 and after making the internal memory upto 2 GB by SP flash tool also from XDA now when i tried to install a new ROM so before that i tried to clear the delvik cache and wipe data as well as full factory reset from TWRP recovery it says failed, cant clear delvik cache....now what to do pls guys help me...i want to install other ROM
jayprakash56287 said:
After Flashing stock ROM of canvas A120 and after making the internal memory upto 2 GB by SP flash tool also from XDA now when i tried to install a new ROM so before that i tried to clear the delvik cache and wipe data as well as full factory reset from TWRP recovery it says failed, cant clear delvik cache....now what to do pls guys help me...i want to install other ROM
Click to expand...
Click to collapse
Which ROM do you want to install? Does it comes with a specific recovery,to be flashed, before flashing the rom?
Stock Kitkat of canvas A120
I have installed stock Kitkat from this site and now when i flash TWRP recovery and tried to clear dalvik cache or wipe data it shows error like failed....dont know what to do to install another cleankat custom ROM
speedracer426 said:
Which ROM do you want to install? Does it comes with a specific recovery,to be flashed, before flashing the rom?
Click to expand...
Click to collapse
I have installed stock Kitkat from this site and now when i flash TWRP recovery and tried to clear dalvik cache or wipe data it shows error like failed....dont know what to do to install another cleankat custom ROM
jayprakash56287 said:
After Flashing stock ROM of canvas A120 and after making the internal memory upto 2 GB by SP flash tool also from XDA now when i tried to install a new ROM so before that i tried to clear the delvik cache and wipe data as well as full factory reset from TWRP recovery it says failed, cant clear delvik cache....now what to do pls guys help me...i want to install other ROM
Click to expand...
Click to collapse
CTR recovery working very well iam using CTR recovery ( it is based on CWM recovery ) in my canvas A120
Use other recoveries
Try installing other compatible recoveries. Follow http://forum.xda-developers.com/showthread.php?t=2777619 and try your luck.
Most of the custom ROMs require WIKO base firmware so you have to download WIKO Rainbow stock Kit Kat and flash it (don't worry WIKO rainbow is just a clone of 2 colors so it's fully compatible).
Related
Hi i installed custom rom to my samsung note 3 with cwm recovery it was working good.After a time later i need to format it.I opened cmw recovery and
-formatted system
-formatted cache
-formatted data
after that i installed custom rom it installed succesfully.I restarted the phone,sound and note 3 writed and it stacked at the "Samsung"writings.I waited a lot but it doesnt opened.How can i solve this problem.
I tried wipe
dalvik wipe cache
wipe cache
but not solved my problem.
I can still reach the cmw recovery 6.0.4.7.
Thanks.
try to flash this file and let me know if it works
btw wrong section to talk about problems
baba17 said:
Hi i installed custom rom to my samsung note 3 with cwm recovery it was working good.After a time later i need to format it.I opened cmw recovery and
-formatted system
-formatted cache
-formatted data
after that i installed custom rom it installed succesfully.I restarted the phone,sound and note 3 writed and it stacked at the "Samsung"writings.I waited a lot but it doesnt opened.How can i solve this problem.
I tried wipe
dalvik wipe cache
wipe cache
but not solved my problem.
I can still reach the cmw recovery 6.0.4.7.
Thanks.
Click to expand...
Click to collapse
Probably tried to flash a KK rom if you where running JB before.
Or the other way around, trying to flash a JB rom on a KK device.
Sent from my SM-N9005 using Tapatalk
I'm using Philz Touch Recovery to flash new ROMs, I wipe data/factory reset, cache and dalvik and then install new ROM, any other steps I should do before flashing new ROM? I want it to clean everything related to old ROM
Lither said:
I'm using Philz Touch Recovery to flash new ROMs, I wipe data/factory reset, cache and dalvik and then install new ROM, any other steps I should do before flashing new ROM? I want it to clean everything related to old ROM
Click to expand...
Click to collapse
All is ok. You can start to flash new custom roms :highfive:
Joku1981 said:
All is ok. You can start to flash new custom roms :highfive:
Click to expand...
Click to collapse
The steps I mentioned above will be more than enough for a fresh install? I don't want old files to conflict with new ROM
Lither said:
The steps I mentioned above will be more than enough for a fresh install? I don't want old files to conflict with new ROM
Click to expand...
Click to collapse
Factory reset, dalvik cache + data wipe will be enough to install fine with no conflicts
Hello,
actually I'm using a SGS4 I9505 with cm-12-20150304-NIGHTLY-jfltexx and CWM 6.0.5.1.
I've tried to flash several TW Lollipop firmware wich i found in the I9505 forum:
1. Kushan+Touchwiz+Lollipop+Lite+Rom+v.1.2
2. S4_Echoev42_EchoePop2_020315
3. OA7-2.1F
4. XXUHA07-v2.01
Before flashing any oft this firmwares i made a factory reset, wiped both caches and installed the modem Firmware via Odin.
After flashing firmware # 1 and 2 my phone was stuc in a bootloop (only Samsung Galaxy S4 Logo appears).
Flashing firmware #3 and 4 fails and cwm reports error 7.
Flashing cm12 afterwards isn't a problem and runs fine.
I think the wipe fails or doesn't work properly. Is it enougth to select factory reset in cwm and wipe the dalvik cache manualy?
What can I do?
With besteht regard
Mirko (NemesisMF)
What if it is a recovery problem?
Thought about that too.
Should i try twrp or philz?
I switched to Philz Recovery and flashed S4 Echoe Rom v42 without any Problems.
CWM seems to have a problem to falsh TW Lollipop images ower an existing CM12 an the I9505.
You need to do full wipe not just cache.
ranger4740 said:
You need to do full wipe not just cache.
Click to expand...
Click to collapse
As I wrote above I did a factory reset before flashing and wiped the caches with cwm. If that is not enougth it would be nice to explain what else I have to wipe or post a link.
While using philz recovery the factory reset for clean system is enougth and the new System is working fine.
Factory wipe is not full wipe, you need to do a full wipe as in format to install new rom, phillz recovery has this feature can't remember exactly where, I think its under advanced.
Just have a look in the sub menus.
Just to explain it better when you do a full wipe it deletes every part of the existing
Rom including the system, data and cache and some other stuff completely removing the android operating system, so unless the rom you install does a wipe before install parts of the existing system will remain and can cause boot issues. For example as you've already discovered you are trying to install a tw rom over an existing cyanogenmod 12 installation which Will cause it to hang on boot.
NemesisMF said:
As I wrote above I did a factory reset before flashing and wiped the caches with cwm. If that is not enougth it would be nice to explain what else I have to wipe or post a link.
While using philz recovery the factory reset for clean system is enougth and the new System is working fine.
Click to expand...
Click to collapse
Do you mean a factory reset from within Android itself? If so, then that's a complete obsolete step. When before flashing a rom you should perform a factory reset, then they always mean a full wipe from the recovery. You need to do a full wipe from the recovery. That means the /system partition is being wiped. You will see it in the screen during the wipe if it wipes /system.
But it also could have been a problem of CWM. I don't think it is being updated anymore, so better use TWRP or Philz.
I use Micromax A120 8 gb stock kitkat , rooted my phone with kingroot and installed recovery CTR in my phone . I made a backup in my CTR recovery Then I flashed Cleankat Agua based custom ROM I wanted to extend my app storage I tried to repartition my internal memory using mlp rio partition tool ..stuck in a boot loop
Then I did a factory reset wiped chase and Dalvik ...wiped storage from mounts and recovered my backup lost my IMEI ...
when I tried to install cleankat again today its not working after installing only stuck on Cleankat logo
When I tried to restore my backup
can't mount/open cache error
I can't delete system from mounts ..I can't restore my backup either
(WILL FLASHING STOCK ROM USING SP FLASH TOOLS WILL WORK )
HELP ME PLZZZ...
Thank you.....
Rohithdrpl said:
I use Micromax A120 8 gb stock kitkat , rooted my phone with kingroot and installed recovery CTR in my phone . I made a backup in my CTR recovery Then I flashed Cleankat Agua based custom ROM I wanted to extend my app storage I tried to repartition my internal memory using mlp rio partition tool ..stuck in a boot loop
Then I did a factory reset wiped chase and Dalvik ...wiped storage from mounts and recovered my backup lost my IMEI ...
when I tried to install cleankat again today its not working after installing only stuck on Cleankat logo
When I tried to restore my backup
can't mount/open cache error
I can't delete system from mounts ..I can't restore my backup either
(WILL FLASHING STOCK ROM USING SP FLASH TOOLS WILL WORK )
HELP ME PLZZZ...
Thank you.....
Click to expand...
Click to collapse
your problem is solved. iam also face this problem 2 months ago
you made backup in CTR recovery
CWM recovery can't restore CTR recovery backup
flash kitkat stock rom & flash CTR recovery in SPflashtool
then restore your old rom from CTR recovery
your IMEI also recovers, your all data in that backup also recovers in this step
Thank you very much ....yesterday...I flashed stock kitkat with sp flash tool
My phone is now working fine
Sent from my Agua Rio using Tapatalk
I flash Philz Recovery then when I go to recovery mode it says can't open/mount cache/recovery_log
i need help.. all expert, please... i try to flash darklord v3 for SM-N9005 using CMW 6.0.4.6... it stuck on the aroma installer... then i restore to my backup. now it stuck at boot loop.
1. My phone already rooted.
2. Nandroid backup on SD card.
3. downloaded darklord v3 stable version and MD5 match.
4. wipe / format all, wipe cache, wipe darlvick cache and flash darklord. Stuck at Aroma installer.
5. Reboot, do the same but still stuck at aroma installer.
6. Decided to restore back to stock lollipop. Restore from SD card.
7. Stuck at samsung logo. wipe/ format all, wipe cache, wipe darlvic cache and restart.
8. Still stuck at samsung logo. Restore again. Restore complete.
9. still stuck at samsung logo...
any idea guys????
Are you using twrp 3 ? The last version of twrp has problems with aroma!! Flash the rom again with twrp version 2.8...
Markofree said:
Are you using twrp 3 ? The last version of twrp has problems with aroma!! Flash the rom again with twrp version 2.8...
Click to expand...
Click to collapse
i used clockwork 6.0.4.6... but i already restore to backup from SD card.. the stock rom backuped before flashing darklord. Could it be the aroma installer?? but i think the aroma installer didnt even started when i flashing darklord. It stuck at Aroma Installer V..... then nothing happen.. Bcos of this, i restore back to stock (nandroid backup).
Try to flash the rom again with twrp ( 2.8....) Wipe data, system, cache, dalvik and internal storage If something goes wrong you have the nandroid...https://dl.twrp.me/hlte/twrp-2.8.7.0-hlte-4.4.zip.html
Markofree said:
Try to flash the rom again with twrp ( 2.8....) Wipe data, system, cache, dalvik and internal storage If something goes wrong you have the nandroid...https://dl.twrp.me/hlte/twrp-2.8.7.0-hlte-4.4.zip.html
Click to expand...
Click to collapse
ok will try and get back to you... Thanks!!
So? How did it go?
Cheifwhat said:
So? How did it go?
Click to expand...
Click to collapse
sorry unable to try. Company assign me to outstation. Can't to anything without my pc. Back to my note 2 first. I will get back as soon as possible and post the result. Thanks!
akuma238 said:
sorry unable to try. Company assign me to outstation. Can't to anything without my pc. Back to my note 2 first. I will get back as soon as possible and post the result. Thanks!
Click to expand...
Click to collapse
sorry guys... i am back from work... i manage to download the stock and flash it. Now will stuck with stock first. will try to flash when finish my work. Thanks for all the help.. cheers
Markofree said:
Are you using twrp 3 ? The last version of twrp has problems with aroma!! Flash the rom again with twrp version 2.8...
Click to expand...
Click to collapse
oh..... So that is the reason I was unable to install phonesis rom. Please give me the link of TWRP 2.8 for n9005.
Update: I have downloaded and flashed it from twrp website. Thanks