hello gud day,
im using AdityaROM V2.1, i carefully followed the instructions. But suddenly after two days, my PC cannot detect my phone through usb but its charging. no response, even device manager doesn't have any yellow "!". I tried restarting, flashing the rom all over again but nothing fix the problem. Then i tried to shut down the phone, take off the battery, and after few secs i put it back and turn it on. And now it won't even charge unless i clean flash the rom. But still my PC won't detect my phone. Any solution to my problem
thanks
wintermelonjay said:
hello gud day,
im using AdityaROM V2.1, i carefully followed the instructions. But suddenly after two days, my PC cannot detect my phone through usb but its charging. no response, even device manager doesn't have any yellow "!". I tried restarting, flashing the rom all over again but nothing fix the problem. Then i tried to shut down the phone, take off the battery, and after few secs i put it back and turn it on. And now it won't even charge unless i clean flash the rom. But still my PC won't detect my phone. Any solution to my problem
thanks
Click to expand...
Click to collapse
try any of these methods- (i had the same prob, i tried everything, lastly my prob got solved by step 4)
1. change cable to see if it works.
2. try another computer.
3. reinstall samsung drivers.
4. (do it carefully) lift-up charging pin of mobile gently and slightly.
Anubhav001 said:
try any of these methods- (i had the same prob, i tried everything, lastly my prob got solved by step 4)
1. change cable to see if it works.
2. try another computer.
3. reinstall samsung drivers.
4. (do it carefully) lift-up charging pin of mobile gently and slightly.
Click to expand...
Click to collapse
thanks but i already did all of that, none works. My cable and PC is fine, any phone i connect using my cable is fine, only my phone is not connecting. i tried using a laptop. but still the problem exists.
Related
As in my earlier post I had mentioned that my atom is not charging in on mode. It only charges when i remove the battery and again put it in and put it for charging. If i turn it on then the charging stops. Same happens when i put the USB cable of my computer.
Secondly the device never syncs nor does the computer recognise any device when i connect via usb (as above it also does not charge).
I tried a lot of ways via buetooth but still it does not sync at all.
Please somebody help.
I recommend hard reset your Atom if that does'nt work then reflash rom
homer285 said:
I recommend hard reset your Atom if that does'nt work then reflash rom
Click to expand...
Click to collapse
But it doesn't sync with the pc then how do i reflash it ?
first backup everything to memcard, you should be able to enter bootloader to flash rom.
homer285 said:
first backup everything to memcard, you should be able to enter bootloader to flash rom.
Click to expand...
Click to collapse
Can you help with this info that whether i can update to the latest ROM by downloading the same from my device itself and installing in on the device (without the use of any computer).
Thank you
swordfish99 said:
As in my earlier post I had mentioned that my atom is not charging in on mode. It only charges when i remove the battery and again put it in and put it for charging. If i turn it on then the charging stops. Same happens when i put the USB cable of my computer.
Secondly the device never syncs nor does the computer recognise any device when i connect via usb (as above it also does not charge).
I tried a lot of ways via buetooth but still it does not sync at all.
Please somebody help.
Click to expand...
Click to collapse
I had a similar problem, it turned out to be a mother board fault and i sent my Atom back to O2 for a warranty repair. Try nipping up the USB mini plug so that it is a tight fit when pushed in to the Atom, that worked for me for a while.
I have HTC HD2,I was trying to upgrade to Android, I think I made a mistake I installed “MAGLDR113” before upgrading my Radio to version 2.15.50.14. After I installed MAGLDR113 I connected my phone to my computer and the telephone was stuck in boot mode and was never able to see USB connection. Now my computer does not recognize my phone anymore and I can’t flash a new Radio version since I have no connectivity to my computer. I tried several things but all was useless. Can anyone help me telling me how I can have a USB connection to my computer??
Thank you.
do you have tried to start and hold volume button... than connect to usb and simply install a stock rom (for example from your provider) - this must work... if not - you have bigger problem.
muhanad said:
I have HTC HD2,I was trying to upgrade to Android, I think I made a mistake I installed “MAGLDR113” before upgrading my Radio to version 2.15.50.14. After I installed MAGLDR113 I connected my phone to my computer and the telephone was stuck in boot mode and was never able to see USB connection. Now my computer does not recognize my phone anymore and I can’t flash a new Radio version since I have no connectivity to my computer. I tried several things but all was useless. Can anyone help me telling me how I can have a USB connection to my computer??
Thank you.
Click to expand...
Click to collapse
Answered so many times. turn your phone off then turn it on "while holding volume down.It will then take to bootloader(rainbow screen).It suppose to have a cotulla written above the rainbow screen.Now flash it with a stock rom came from HTC site..No need to sync your phone to your PC..Just flash it..Start all over again..Now you can search before doing somehing with your phone.If that didn't help you. You have a bigger problem..
Yes I tried this also but it doesn't work.
What didn't work? Can you boot into bootloader - ie switch off, press and hold vol down button and switch phone on.
You should then boot into a multi-coloured screen and should see "serial" at the bottom of the screen.Then connect device to usb port (preferably one at back of your pc and a different one that you haven't used before if possible) - let the drivers install if applicable - does "serial" change to "usb"?
Do wat d above posters have suggested then try different usb ports or even a different windows pc...For all we know, your usb cable might be faulty....Also did u perform HARDSPL before anything else?
I've started experiencing this very same thing. HD2 wont regognize usb connection while in bootloader screen. I get the usb connection sound but never says usb at bottom of screen like it used to. I've been trying android builds via sd but wanted to try my first flash but cant even instal MAGLDR cos it just fails at bootloader cos of no connection. Has been driving me wild for 3 days now.
try plugging the phone into a different USB port it should work then...
Tried that all day and it said couldn't install drivers, then just tried the same ports now and its worked. I think it was mobile device center had 2 set-ups for my phone, i deleted the older one and all seems fine now.
This is crazy, now i'm stuck on magldr and won't find usb.
I'm leaving nand now cos i'm close to smashing my phone to pieces, magldr usb flasher will not find the connection no matter what i try, so i'm staying with ****ty windows mobile. Not happy but i've been trying for days now.
Smoke74 said:
I've started experiencing this very same thing. HD2 wont regognize usb connection while in bootloader screen. I get the usb connection sound but never says usb at bottom of screen like it used to. I've been trying android builds via sd but wanted to try my first flash but cant even instal MAGLDR cos it just fails at bootloader cos of no connection. Has been driving me wild for 3 days now.
Click to expand...
Click to collapse
I am experiencing this exact same problem. Bootloader wont recognize the USB stays in SERIAL. Tried different ports, cord is fine. What is the problem.
Before this, my HTC HD2 would just hard reset on its own ONCE A DAY! Why was it doing this?
Now it gets stuck on the white HTC loading screen. Wont get passed it. I used to be able to hard reset by doing the volume keys down and reset but NOPE... still wont load past that white screen.
HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Have you guys tried deleting the drivers using a utility like USBDeview? Try deleting anything that relates to HTC OR HD2, replug the phone in, re-install the drivers.
h.nocturna said:
Have you guys tried deleting the drivers using a utility like USBDeview? Try deleting anything that relates to HTC OR HD2, replug the phone in, re-install the drivers.
Click to expand...
Click to collapse
IDK what USBDeview is.
Im in Safemode so no drivers load up... because it didnt work in Normal mode. Still nothing
taha23 said:
IDK what USBDeview is.
Im in Safemode so no drivers load up... because it didnt work in Normal mode. Still nothing
Click to expand...
Click to collapse
Of course it won't work without drivers. The computer needs drivers to communicate with the phone. In normal mode, unplug the phone, Google the application, download it, open it, click everything that has HTC or HD2 in it and click uninstall. Plug the phone in, let the drivers install themselves again. Try again.
h.nocturna said:
Of course it won't work without drivers. The computer needs drivers to communicate with the phone. In normal mode, unplug the phone, Google the application, download it, open it, click everything that has HTC or HD2 in it and click uninstall. Plug the phone in, let the drivers install themselves again. Try again.
Click to expand...
Click to collapse
Ok... i rebooted into Normal mode, downloaded the utility, did a search for "HTC" found nothing, did a search for "HD" found nothing. So i am now installing windows mobile center for windows 7 which should have the appropriate drivers.
Install Windows mobile device center 6.1, problem solved.
Sent from my HTC HD2 using XDA Premium App
I'm able to view through USBDeview that my HD2 is connected, however I'm unable to view/open it.. I screwed up by naming the 'temp' folder to 'copy_to_sd_root'..
The instructions confused me. I figured this was the folder that needed to be copied to the sd root... however when i rebooted the phone, I was unable to access it. Any recommendations?
SOLVED
I was overlooking the USB Flash option.
If you are still having problems, let your phone turn on(no multi-color screen), select: USB Flash, click the DAF.exe installation file, follow the prompts.
You're done.
I had this problem and I solved it disabling an option in activesync. I can't remember what was exactly the checkbox, but was in "options" and it said something like "allow usb connections" or something like this.
I just disabled it and rebooted the device holding volume down.
Good luck!
Make Sure Phone is not connected to PC
Goto cotrol panel in windows
Uninstall HTC BMP USB Driver
Uninstall HTC Driver Installer
Uninstall HTC Sync
Unisntall Windows Mobile Device Center
Restart the PC
start the phone holding power and vol dn and now connect the phone to PC. should detect and install the drivers and you should be able to see USB on phone screen.
if this does not work
Delete all the USB root HUB but keep as last option in device manager.
PS: This will cause ALL the USB devices to redetect.
Let me know if this works
I tried to reinstall an android rom on it and for some reason it keeps looping and the computer will not recognize it. I am able to get on MGLDR but the computer will not find my phone. Please I need hel I've been trying to fix it for the last 5 hrs.
If you still can have acces to th MAGLDR, just do the process again and re-flash your ROM... Do a full wipe before and all is gonna be fine
The problem is that the computer don't find my phone. I've tried everything I've found on the forum and still can get it to find it.
mtorr69 said:
The problem is that the computer don't find my phone. I've tried everything I've found on the forum and still can get it to find it.
Click to expand...
Click to collapse
Maybe you need the ADB drivers. Does it detect the phone in USB storage mode? Flash mode? Have you installed clockwork recovery? Can it detect the phone in that USB storage mode? Did it work before you made changes to the phone or is this your first Android flash?
Why don't you task29 your phone, install MAGLDR, throw a 150MB recovery image on, stick a recovery ROM on your SD card and flash again?
the computer does not detect the phone at all. It did work before I made the changes. It is my 2nd flash. and the problem is that the phone keeps looping after I boot from nand, iget the 123 and the gogogo and then reboots again
mtorr69 said:
the computer does not detect the phone at all. It did work before I made the changes. It is my 2nd flash. and the problem is that the phone keeps looping after I boot from nand, iget the 123 and the gogogo and then reboots again
Click to expand...
Click to collapse
Try to boot by pressing volume down and power. Then you will get to the tri-color screen. Plug in the USB cable and wait for a connection. If your computer doesn't even recognize it there, then you're really f***'d up, I would mean..
Edit: Or you didn't install the active sync drivers that SPL and your computer need to communicate.
JanssoN said:
Edit: Or you didn't install the active sync drivers that SPL and your computer need to communicate.
Click to expand...
Click to collapse
His suggestion of this being his second flash lead me to believe he's done that bit already.
I would have to say at this point it's either your desktop PC/Laptop or the cable.
I have a dodgy cable, sometimes when I "think" my phone is charging it actually isn't, even though the LED and OS tell me it should be.
Also my Laptop point blank refused to detect my HD2 a while ago.
Recommendations:
Try same cable in a different PC.
Try new cable in same & different PC.
If your work computers are on lockdown, you can at least take the cable there with you and see if the Administrator policy window pops up to tell you you're not allowed to install new hardware. That way you know the phone and cable are fine.
dkl_uk said:
His suggestion of this being his second flash lead me to believe he's done that bit already.
Click to expand...
Click to collapse
Yeah, you're right
Maybe it is also the port on his device, my port seems to have a loose connection too as it is not the most stable anyway..
Thanks everyone. I downloaded a recovery program on my SD card , rebooted and flashed again. Thank You very much for all your help.
Hi guys,
Im actually using samsung galaxy s GT-9001 and have recently ran into a serious problem. actually two
Problem 1 : Usb cable malfuction
Im unable to connect my phone to pc, windows reports unrecognised device (was able before, tried few PC, cables) , furthermore im unable to charge my device unless i remove the battery, connect the charger then put the battery back up. Also noticed if i just put the charger on turned off device it boots instantly (skiping the option to charged as turned off), it does charge over USB, but does not recognise it.
Problem 2 : How to return to stock recovery and rom without USB
In regards to my problem number 1 , i have decided to give a shot at warranty, unfortunately cannot get rid of my CWM and custom ROM without ODIN. Any ideas how i could go back to stock rom + stock recovery without USB cable?
ps: Only created this thread as my last resort, after countless hours of browsing and testing. Please help
furthermore im unable to charge my device unless i remove the battery, connect the charger then put the battery back up. [/QUOTE]
Have you tried cleaning the contacts on battery and phone?
MogiMogi said:
Problem 2 : How to return to stock recovery and rom without USB
Click to expand...
Click to collapse
You can try Mobile Odin and also these to resolve connection problems
I am trying to connect my Grand 2 [SM-G7102] with my pc, but unfortunately, its not detecting my phone. And I don't even have a clue whether it happened because of me or not..
I've already tried several steps to solve my prob but none of them worked.
Like-
1. Rebooting the phone, clearing cache n dalvik cache. (Didn't worked)
2. Uninstalled all its drivers from computer and reinstalling latest one's. (Tried old and new versions, none worked)
3. Installed Kies3 to check its discoverable or not. (Tries to discover but says not recognized)
4. Changing modes from mtp to ptp to adb. (Useless)
5. Cleaning off the pins and using its original data cable. (Switched several cables)
After these steps what I found out is that after fresh installed drivers it attempts to install its own driver which takes too long but after installing it does not get detected in my computer but rather it shows up in device manager with name "SAMSUNG_Android".
I know it cant be rom issue or anything like that, but also I believe its not pin broken issue as it is charging plus when i uninstalled all its drivers the device tries to reinstall its own driver taking 5 minutes but in end it shows "Installing SAMSUNG_Android" and closes.
So please help me out and suggest something .
Thanks in advance .
Are you using Mukulsoni's cm12.1 AIO 2 ROM?
Anubhav001 said:
I am trying to connect my Grand 2 [SM-G7102] with my pc, but unfortunately, its not detecting my phone. And I don't even have a clue whether it happened because of me or not..
I've already tried several steps to solve my prob but none of them worked.
Like-
1. Rebooting the phone, clearing cache n dalvik cache. (Didn't worked)
2. Uninstalled all its drivers from computer and reinstalling latest one's. (Tried old and new versions, none worked)
3. Installed Kies3 to check its discoverable or not. (Tries to discover but says not recognized)
4. Changing modes from mtp to ptp to adb. (Useless)
5. Cleaning off the pins and using its original data cable. (Switched several cables)
After these steps what I found out is that after fresh installed drivers it attempts to install its own driver which takes too long but after installing it does not get detected in my computer but rather it shows up in device manager with name "SAMSUNG_Android".
I know it cant be rom issue or anything like that, but also I believe its not pin broken issue as it is charging plus when i uninstalled all its drivers the device tries to reinstall its own driver taking 5 minutes but in end it shows "Installing SAMSUNG_Android" and closes.
So please help me out and suggest something .
Thanks in advance .
Click to expand...
Click to collapse
Hav u tried USB debugging in Developer options?
VigneshS007 said:
Hav u tried USB debugging in Developer options?
Click to expand...
Click to collapse
yes
Anubhav001 said:
yes
Click to expand...
Click to collapse
hav u tried installing USB driver from the internet?
Same issue
Anubhav001 said:
I am trying to connect my Grand 2 [SM-G7102] with my pc, but unfortunately, its not detecting my phone. And I don't even have a clue whether it happened because of me or not..
I've already tried several steps to solve my prob but none of them worked.
Like-
1. Rebooting the phone, clearing cache n dalvik cache. (Didn't worked)
2. Uninstalled all its drivers from computer and reinstalling latest one's. (Tried old and new versions, none worked)
3. Installed Kies3 to check its discoverable or not. (Tries to discover but says not recognized)
4. Changing modes from mtp to ptp to adb. (Useless)
5. Cleaning off the pins and using its original data cable. (Switched several cables)
After these steps what I found out is that after fresh installed drivers it attempts to install its own driver which takes too long but after installing it does not get detected in my computer but rather it shows up in device manager with name "SAMSUNG_Android".
I know it cant be rom issue or anything like that, but also I believe its not pin broken issue as it is charging plus when i uninstalled all its drivers the device tries to reinstall its own driver taking 5 minutes but in end it shows "Installing SAMSUNG_Android" and closes.
So please help me out and suggest something .
Thanks in advance .
Click to expand...
Click to collapse
a while back I faced the same issue..
if you have already tried uninstalling drivers and reinstalling them, also tried kies and switching cables..
then here is what you do..!
Take a non-metallic, non-conductive slim object (a toothpick can do just fine)..
you have to insert it into the connector end of your phone, gently place it below the tongue of the connector, and lift that tongue-like thing up a little bit..
don't apply extra pressure, or don't try to force things, easy does it just fine..!
all you have to do is push it upwards just a little and then try connecting again..should do it.!
VigneshS007 said:
hav u tried installing USB driver from the internet?
Click to expand...
Click to collapse
Tried every different versions from old to newest
Parantap said:
a while back I faced the same issue..
if you have already tried uninstalling drivers and reinstalling them, also tried kies and switching cables..
then here is what you do..!
Take a non-metallic, non-conductive slim object (a toothpick can do just fine)..
you have to insert it into the connector end of your phone, gently place it below the tongue of the connector, and lift that tongue-like thing up a little bit..
don't apply extra pressure, or don't try to force things, easy does it just fine..!
all you have to do is push it upwards just a little and then try connecting again..should do it.!
Click to expand...
Click to collapse
Thanks but did not work
I was able to connect my phone with PC by choosing it connected as a Camera and then I switched it back to MTP, then it recognised mine. Hope my suggestion helps you
Sent from my SM-G7102 using Tapatalk