Verizon Galaxy S5 Rom install problems Safestrap - Verizon Galaxy S 5 Q&A, Help & Troubleshooting

Ok So everywhere i looked for the SM-G900V says i need to use safestrap to install roms on my verizon s5 cause of the locked bootloader.
Installed busybox, SuperSu, got root access and installed safestrap.
Everytime i seem to install any rom (AllianceRom) it takes me straight back to Stock Recovery and then i have to reboot into safestrap. Once i see the Safestrap screen for 10 seconds after that it is just a black screen. Other people seem to be installing roms fine . Im not sure if im doing something wrong but if anyone has any help it would be much appreciated.

GardenST8Wonder said:
Ok So everywhere i looked for the SM-G900V says i need to use safestrap to install roms on my verizon s5 cause of the locked bootloader.
Installed busybox, SuperSu, got root access and installed safestrap.
Everytime i seem to install any rom (AllianceRom) it takes me straight back to Stock Recovery and then i have to reboot into safestrap. Once i see the Safestrap screen for 10 seconds after that it is just a black screen. Other people seem to be installing roms fine . Im not sure if im doing something wrong but if anyone has any help it would be much appreciated.
Click to expand...
Click to collapse
Read the section of "Fixing a Bricked Phone" here: http://forum.xda-developers.com/verizon-galaxy-s5/general/guide-painiacs-essential-guide-to-t3319848

painiac said:
Read the section of "Fixing a Bricked Phone" here: http://forum.xda-developers.com/verizon-galaxy-s5/general/guide-painiacs-essential-guide-to-t3319848
Click to expand...
Click to collapse
I can go into download mode and restore to Stock NCG. The only problem im having is when i try to install any touch-wiz based rom it goes to black screen then it boots into stock recovery forcing me to flash stock recovery again.

GardenST8Wonder said:
I can go into download mode and restore to Stock NCG. The only problem im having is when i try to install any touch-wiz based rom it goes to black screen then it boots into stock recovery forcing me to flash stock recovery again.
Click to expand...
Click to collapse
BUMP

GardenST8Wonder said:
BUMP
Click to expand...
Click to collapse
Can you Odin back to NCG and start from scratch. That's the only thing that I can think of doing and that's if you haven't taken any OTA's passed OD5.

al50 said:
Can you Odin back to NCG and start from scratch. That's the only thing that I can think of doing and that's if you haven't taken any OTA's passed OD5.
Click to expand...
Click to collapse
Honestly im kinda new to rooting and what not. Ive rooted a non-verizon phone before, but i understand its different on verizon and at&t due to the locked bootloader. Ive tried to Odin back to NCG. Everything installs fine up to the point when i install a rom, it soft-bricks the phone. It loads back into stock recovery.
Now i thought it would be better if i update my Phone to OA8 5.0 Not sure if that is the newest update from verizon cause i dont get ota updates on my s5. Any help i can get would be much much appreciated. If i can i will try and odin back down to NCG.

GardenST8Wonder said:
Honestly im kinda new to rooting and what not. Ive rooted a non-verizon phone before, but i understand its different on verizon and at&t due to the locked bootloader. Ive tried to Odin back to NCG. Everything installs fine up to the point when i install a rom, it soft-bricks the phone. It loads back into stock recovery.
Now i thought it would be better if i update my Phone to OA8 5.0 Not sure if that is the newest update from verizon cause i dont get ota updates on my s5. Any help i can get would be much much appreciated. If i can i will try and odin back down to NCG.
Click to expand...
Click to collapse
Did you read that section and try it? It contains the procedure for clearing the cache after a ROM install, which almost always resolves the very issue you are having.
The other thing is, lollipop ROMs take around 10 minutes to boot up the first time.

Did you figure it out yet?
Sent from my stang5litre Edition 5.0 using XDA-Developers mobile app

Related

[Q] SGS4 Stock Rooted. KitKat Update OTA failure (using triangle away.)

Ok, so last OTA worked. Here is what i did:
I used triangle away's feature to hide system modified warning
i downloaded the OTA update
I disabled the triangle away fix before installing OTA (like it says to do in triangle away)
Phone rebooted and installed the OTA in CWM
Done.
I tried this today to upgrade from 4.3 to whatever is being pushed by my carrier (kitkat)
this time, when i install the OTA, it reboots to CWM and CWM says "install untrusted zip?" I hit yes, it says install aborted. I hit no, it says same thing.
I have heard others mention this, and were told to restore a stock recovery. I have found instructions to do that here:
http://www.android.gs/how-to-install-stock-recovery-for-the-samsung-galaxy-s4-i9500-i9505/
But i dont have a i9500, i have the canadian model, the i337m
Can i still flash the stock recovery image from an i9500? or will i brick something.
also not understanding why i have to do any of this when it worked last time and nothing has changed....maybe because its jumping from 4.3 to 4.4 ... i dunno..
Any advice appreciated, id love to get this OTA. I just dont want roms anymore, only stock. but i want to stay up to date with my android version, and that is becoming tough for me.
thanks.
luke318is said:
Ok, so last OTA worked. Here is what i did:
I used triangle away's feature to hide system modified warning
i downloaded the OTA update
I disabled the triangle away fix before installing OTA (like it says to do in triangle away)
Phone rebooted and installed the OTA in CWM
Done.
I tried this today to upgrade from 4.3 to whatever is being pushed by my carrier (kitkat)
this time, when i install the OTA, it reboots to CWM and CWM says "install untrusted zip?" I hit yes, it says install aborted. I hit no, it says same thing.
I have heard others mention this, and were told to restore a stock recovery. I have found instructions to do that here:
http://www.android.gs/how-to-install-stock-recovery-for-the-samsung-galaxy-s4-i9500-i9505/
But i dont have a i9500, i have the canadian model, the i337m
Can i still flash the stock recovery image from an i9500? or will i brick something.
also not understanding why i have to do any of this when it worked last time and nothing has changed....maybe because its jumping from 4.3 to 4.4 ... i dunno..
Any advice appreciated, id love to get this OTA. I just dont want roms anymore, only stock. but i want to stay up to date with my android version, and that is becoming tough for me.
thanks.
Click to expand...
Click to collapse
Thats exactly because you're upgrading from 4.3 to kk and yeah bootloaders differ probably that's the reason recovery and roms should be flashed if they are specifically for your model i9300 cabt have a rom which is for i9505 it bricks your phone same with recovery and yeah better make a clean flash via odin!
I guess i want to know what to do now. How do i get the Ota? How do i get stock recovery back
These are basic questions that have been anwsered 1000 times already. There is a search button you know.
First of all this is not the i1337m forum.
Second flashing stuff on your phone that is not for you phone is the dumbest thing to do. You should know that before you start messing with your phone.
Go to your forum and use the search button.
Lennyz1988 said:
These are basic questions that have been anwsered 1000 times already. There is a search button you know.
First of all this is not the i1337m forum.
Second flashing stuff on your phone that is not for you phone is the dumbest thing to do. You should know that before you start messing with your phone.
Go to your forum and use the search button.
Click to expand...
Click to collapse
Ill do just fine without you're attitude, take it elsewhere

how to go from NC4 to NC2 on Verizon Note 3???

Ok I have been trying for a week to install and run roms, I was able to get 1 rom working, don't remember which on at the moment.
I have Rooted the phone, installed Safestrap 3.75, also in the process of messing with it over the week I have tripped Knox, But no Big deal.
I have have tried to install nc2 using the instructions in http://forum.xda-developers.com/showthread.php?t=2543386 the one that says "IF YOU ARE ON NC4 (Official VZW OTA) Follow The Below Instructions" with NO Luck, All I got was the boot screen before the safestrap screen and then Nothing, Black screen!
What I am trying to do is get it to where I can use the rom slots in the Safestrap and run Hyperdrive rom in a rom slot along with other roms in the other slots
So far I have tried so many things I lost track and I have had to use ODIN about 5 times to re-install the Stock roms because I messed it up so bad it would not even go into safestrap
Any help would be appreciated.
Update: I guess i did not stand on my head the right way or something like that! LOL
All I had to do was follow this thread http://forum.xda-developers.com/showthread.php?t=2787627 and got things going
Zenman2010 said:
Ok I have been trying for a week to install and run roms, I was able to get 1 rom working, don't remember which on at the moment.
I have Rooted the phone, installed Safestrap 3.75, also in the process of messing with it over the week I have tripped Knox, But no Big deal.
I have have tried to install nc2 using the instructions in http://forum.xda-developers.com/showthread.php?t=2543386 the one that says "IF YOU ARE ON NC4 (Official VZW OTA) Follow The Below Instructions" with NO Luck, All I got was the boot screen before the safestrap screen and then Nothing, Black screen!
What I am trying to do is get it to where I can use the rom slots in the Safestrap and run Hyperdrive rom in a rom slot along with other roms in the other slots
So far I have tried so many things I lost track and I have had to use ODIN about 5 times to re-install the Stock roms because I messed it up so bad it would not even go into safestrap
Any help would be appreciated.
Update: I guess i did not stand on my head the right way or something like that! LOL
All I had to do was follow this thread http://forum.xda-developers.com/showthread.php?t=2787627 and got things going
Click to expand...
Click to collapse
I was just about to send there, glad you got it going...

I messed up :(

So I am trying to reset my Verizon Galaxy S5 to BS_FREE_Lolipop but I messed up and now my phone won't boot up, it says Software Update failed... So what I did was download the files he provided and tried to load https://www.androidfilehost.com/?fid=24052804347776876 and it didn't work and I am where I am now. I just want to get root access to be able to install BS_FREE_Lollipop on my phone someone please help
http://forum.xda-developers.com/ver...w-to-update-to-g900voe1-5-0-keeproot-t3149784 go there and downgrade to NCG then reroot
Veid71 said:
http://forum.xda-developers.com/ver...w-to-update-to-g900voe1-5-0-keeproot-t3149784 go there and downgrade to NCG then reroot
Click to expand...
Click to collapse
Thanks I'll try that I hope it works
Griingo said:
Thanks I'll try that I hope it works
Click to expand...
Click to collapse
np lemmi know how it goes and if it helps
Veid71 said:
np lemmi know how it goes and if it helps
Click to expand...
Click to collapse
Okay so I just around to looking at that thread but that won't work, my phone is bricked right now I can't turn it on without it saying I need to repair it I can only put the phone in download mode :/
Griingo said:
Okay so I just around to looking at that thread but that won't work, my phone is bricked right now I can't turn it on without it saying I need to repair it I can only put the phone in download mode :/
Click to expand...
Click to collapse
yup thats what you do you put it into download mode flash Full Wipe G900V_Downgrade_to_NCG.tar (its located on step 4 in the notes section) using odin on your computer (you connect your phone to computer) then you redownload towelroot super su busy box and safestrap and youre rooted then you can choose to upgrade to whatever version or thing you want in your case bsfreelollipop
Griingo said:
So I am trying to reset my Verizon Galaxy S5 to BS_FREE_Lolipop but I messed up and now my phone won't boot up, it says Software Update failed... So what I did was download the files he provided and tried to load https://www.androidfilehost.com/?fid=24052804347776876 and it didn't work and I am where I am now. I just want to get root access to be able to install BS_FREE_Lollipop on my phone someone please help
Click to expand...
Click to collapse
You wrote you want to reset your phone to the BS free ROM, but then at the end you write you want to get root access. What state was your phone in when you started to try this? Was your phone already rooted? Was your phone already rooted and on BS free ROM and just needed to clean up your phone and get back onto the BS free ROM? If you were not already rooted and had taken the Verizon OTA updates to Lollipop, chances are good you cannot root your phone, and therefore you cannot run the BS Free ROM. Let us know what state your phone was in when you started this so we can help you better.
Griingo said:
So I am trying to reset my Verizon Galaxy S5 to BS_FREE_Lolipop but I messed up and now my phone won't boot up, it says Software Update failed... So what I did was download the files he provided and tried to load https://www.androidfilehost.com/?fid=24052804347776876 and it didn't work and I am where I am now. I just want to get root access to be able to install BS_FREE_Lollipop on my phone someone please help
Click to expand...
Click to collapse
What software version you're on and did you have root before you tried to reset to Verizon Galaxy S5 to BS_FREE_Lolipop??
To reply to everyone the only thing I ever did with the phone was update to 5.0 If I can't get root no big deal but I really want to install something that gets rid of all the Verizon junk apps :/
Griingo said:
To reply to everyone the only thing I ever did with the phone was update to 5.0 If I can't get root no big deal but I really want to install something that gets rid of all the Verizon junk apps :/
Click to expand...
Click to collapse
If you never rooted your phone and you took all of the Verizon OTA updates to 5.0 you are most likely on OG5 and cannot root your phone. If you took an OTA update in the past few days before trying this, you may have been on the latest OK3 security patch update. Your best bet would probably be to find the OG5 full factory tar file and flash it in ODIN to get your phone back to a working state. I think there is a thread in the general section where you can find the file you need.
landshark68 said:
If you never rooted your phone and you took all of the Verizon OTA updates to 5.0 you are most likely on OG5 and cannot root your phone. If you took an OTA update in the past few days before trying this, you may have been on the latest OK3 security patch update. Your best bet would probably be to find the OG5 full factory tar file and flash it in ODIN to get your phone back to a working state. I think there is a thread in the general section where you can find the file you need.
Click to expand...
Click to collapse
Okay I'll try that, and what about after I get it working, can I install any new ROM or whatever to get rid of all the verizon junk?
Griingo said:
Okay I'll try that, and what about after I get it working, can I install any new ROM or whatever to get rid of all the verizon junk?
Click to expand...
Click to collapse
No. No root means no custom ROMs.
landshark68 said:
No. No root means no custom ROMs.
Click to expand...
Click to collapse
Well I was able to repair it finally using the tool, I'm still on 5.0 so I'm guessing I'm screwed... What about downgrading and then doing root / custom ROM? Or am I just screwed all together LOL I'd just sell the phone at this point since I no longer have Verizon (they're ****) but still have the phone.
Griingo said:
Well I was able to repair it finally using the tool, I'm still on 5.0 so I'm guessing I'm screwed... What about downgrading and then doing root / custom ROM? Or am I just screwed all together LOL I'd just sell the phone at this point since I no longer have Verizon (they're ****) but still have the phone.
Click to expand...
Click to collapse
Sorry to keep saying no, but if you are on OE1, OG5, or the new OK3 you cannot downgrade. You are stuck where you are.

Download Unsuccessful MSG - KK to N910VVRU1BOAF

I'm trying to root, then unlock my Retail phone. I heard it can be done on BOAF 5.0.1. I downgraded my phone to KK ANJ5 (details on what steps I took, here)
I actually did a Factory Data Wipe twice before beginning, although the instructions said I only needed to do it once (doing it twice shouldn't hurt).
When I tap the System Updates button, it appears to start downloading, then after a few minutes, I'll get an error message saying "Download Unsuccessful". I've done this several times. Why is this happening now? I've cleared everything. Could Verizon have pulled the update? Can I install the two files manually? If so, please point me to the right direction. Thanks.
Flash N910VVRU2BOG5_StockRestore.tar.md5 using Odin. It will upgrade you and you will be able to convert your phone to developer mode using the steps in the thread.
Sizzlechest said:
Flash N910VVRU2BOG5_StockRestore.tar.md5 using Odin. It will upgrade you and you will be able to convert your phone to developer mode using the steps in the thread.
Click to expand...
Click to collapse
I took the latest safe upgrade, I think it's BP1 or something like that., to 5.1.1. THAT worked.
So basically we have to be on 5.1.1 ??
Sent from my SM-N910V using XDA Premium HD app
rrjskj said:
So basically we have to be on 5.1.1 ??
Sent from my SM-N910V using XDA Premium HD app
Click to expand...
Click to collapse
I'm just saying that's what for sure worked for me. KK didn't work at all. I don't know if you "have to" be on it or not.
JOSHSKORN said:
I'm just saying that's what for sure worked for me. KK didn't work at all. I don't know if you "have to" be on it or not.
Click to expand...
Click to collapse
I might give it a whirl if fix doesn't come soon. In the meantime could u point me in the right direction for the safe upgrade files and what Odin version ?? Thanks in advance.
Sent from my SM-N910V using XDA Premium HD app
http://forum.xda-developers.com/not...nt/firmware-safe-upgrade-to-lollipop-t3313224
read everything!
Rom-Addict said:
http://forum.xda-developers.com/not...nt/firmware-safe-upgrade-to-lollipop-t3313224
read everything!
Click to expand...
Click to collapse
Already did it I appreciated.
Sent from my SM-N910V using XDA Premium HD app
I've had it work on boaf, bpa, bog5. kk wouldn't work for me. using king root 4.0,.all unlocks (n4.n4.bin. n4.fix) worked for me. bpa (5.1.1)required the emotion kernel to boot. also returned my original Cid to use kies to restore all apps & data, then odined back again, unlocked, rooted ect. be patient
Rom-Addict said:
http://forum.xda-developers.com/not...nt/firmware-safe-upgrade-to-lollipop-t3313224
read everything!
Click to expand...
Click to collapse
What confused me and a few other people in that thread is that you NEED to flash that kernel before the SuperSU linked there if you want to root 5.1.1 firmware. I thought it was just if you had taken the OTA 5.1.1.
Sizzlechest said:
What confused me and a few other people in that thread is that you NEED to flash that kernel before the SuperSU linked there if you want to root 5.1.1 firmware. I thought it was just if you had taken the OTA 5.1.1.
Click to expand...
Click to collapse
This is what I did (I think). Kinda hard to remember everything. For more information, read through the HOWTO thread. I think I started posting at about page 9.
went ahead and did the safe upgrade via Odin
Swapped out my MicroSD card for a different one I had laying around
Unlocked my phone
Powered Down (If I could, or remove the battery)
Removed the MicroSD card (otherwise it would boot loop)
Connected to My Computer
Boot to Download Mode (DOWN ARROW+HOME+POWER BUTTON)
Flashed TWRP using Odin
Reinserted the original MicroSD Card (Different SD card than what was used during the unlock process, the same one I was using prior to unlocking)
Booted into TWRP (UP ARROW+HOME+POWER BUTTON)
It prompted me to install SuperUser, so I did, it caused a bootloop, so I pulled my battery.
Removed MicroSD Card, plugged it into my computer and put SuperSU.zip and a kernel (See this post) zip file on it, re-inserted the MicroSD into my phone
Booted to TWRP (UP ARROW+HOME+POWER BUTTON)
Flashed the two files I'd just put on my MicroSD (Not sure if a reboot is required or if they could be done at the same time, I rebooted each time)
I did not clear cache/dalvik. Not sure if that was necessary.
This is all what got me to where I'm at, now.
JOSHSKORN said:
This is what I did (I think). Kinda hard to remember everything. For more information, read through the HOWTO thread. I think I started posting at about page 9.
...
This is all what got me to where I'm at, now.
Click to expand...
Click to collapse
For 5.0.1, you don't need to flash a new kernel, so that's why it works. If you want to upgrade to N910VVRU2BPA1:
Download N910VVRU2BPA1_StockRestore.tar.md5.7z and uncompress with 7-zip.
Flash with Odin.
Reboot phone back into Download Mode and flash TWRP with Odin.
Copy MultiSystem-Kernel_LP-5.1.1.zip and BETA-SuperSU-v2.67-20160203160253-TruncatedBoot-Fix.zip to the phone's internal memory. (Include xposed-v75-sdk21-arm-arter97-snapdragon.zip if you want XPosed.)
Reboot to recovery and flash all three in the above order.
Wipe cache and Davlik cache. Reboot to system.
Sizzlechest said:
Flash N910VVRU2BOG5_StockRestore.tar.md5 using Odin. It will upgrade you and you will be able to convert your phone to developer mode using the steps in the thread.
Click to expand...
Click to collapse
I'm on 4.4.4 is this what I need to do a lot of other people are having the problem of getting the commands to work on 4.4.4 and are asking the question of do we need to upgrade some aren't getting answered and some are being told different things I'm sorry for asking but I need to know so I can unlock my bootloader thank you
Jimmy8 said:
I'm on 4.4.4 is this what I need to do a lot of other people are having the problem of getting the commands to work on 4.4.4 and are asking the question of do we need to upgrade some aren't getting answered and some are being told different things I'm sorry for asking but I need to know so I can unlock my bootloader thank you
Click to expand...
Click to collapse
There seems to be a bug in the detection routine on the program that changes the bootloader to developer when run on 4.4.4. If you want to follow the original directions, upgrade (first) to a 5.0.1 firmware since that is known to work with the unlocker and no new kernel needs to be flashed. If you get it to work for 5.0.1, then you can always upgrade to 5.1.1 or flash another rom.
If you want to try to go straight to 5.1.1 by flashing through Odin, you can try it. I'm almost positive you could downgrade to 5.0.1 if that doesn't work. (If you take the software upgrade through Verizon, you will have problems downgrading AFAIK.)
Sizzlechest said:
There seems to be a bug in the detection routine on the program that changes the bootloader to developer when run on 4.4.4. If you want to follow the original directions, upgrade (first) to a 5.0.1 firmware since that is known to work with the unlocker and no new kernel needs to be flashed. If you get it to work for 5.0.1, then you can always upgrade to 5.1.1 or flash another rom.
If you want to try to go straight to 5.1.1 by flashing through Odin, you can try it. I'm almost positive you could downgrade to 5.0.1 if that doesn't work. (If you take the software upgrade through Verizon, you will have problems downgrading AFAIK.)
Click to expand...
Click to collapse
Thanks I just upgraded through Verizon to 5.0.1 and I'll give that a try and see if it works if not I'll safe upgrade to 5.1.1 thanks
Jimmy8 said:
I'm on 4.4.4 is this what I need to do a lot of other people are having the problem of getting the commands to work on 4.4.4 and are asking the question of do we need to upgrade some aren't getting answered and some are being told different things I'm sorry for asking but I need to know so I can unlock my bootloader thank you
Click to expand...
Click to collapse
If that doesn't work, I recommend you rollback to 4.4.4 (you should be able to if you're on BOAF), then take the safe upgrade to BP1. Once you do that, you should be good to go. That is, I wasn't able to convert to developer mode on KK, but after taking the safe upgrade, I was. Maybe it had to do with the BOAF bootloader, and if that's the case, "maybe' you're ok doing it as is. Good luck. I'm sure you'll be back if it doesn't work, but if it DOES work, can you report back? In fact, I also have a thread in Q&A titled Root Survey. Please post there as well ONLY if you were able to successfully convert. I wanted to compile a list of users that were able to convert, where they were before they started, what worked, what didn't, and so far, all what I'm seeing is, is that starting from KK doesn't work, although we were told all along to keep KK. I also heard one user said that he had taken all OTAs to 5..1.1., still made the conversion process work, BUT, his phone was a developer phone to begin with but he accidentally locked it with a Retail ROM. I'm kind of a noob, myself, but from what I do know, I don't recommend taking any OTAs anyway past BOAF, otherwise the conversion "might not" happen, but there are a lot of people who have taken all OTAs so we'll see what happens with them.
JOSHSKORN said:
If that doesn't work, I recommend you rollback to 4.4.4 (you should be able to if you're on BOAF), then take the safe upgrade to BP1. Once you do that, you should be good to go. That is, I wasn't able to convert to developer mode on KK, but after taking the safe upgrade, I was. Maybe it had to do with the BOAF bootloader, and if that's the case, "maybe' you're ok doing it as is. Good luck. I'm sure you'll be back if it doesn't work, but if it DOES work, can you report back? In fact, I also have a thread in Q&A titled Root Survey. Please post there as well ONLY if you were able to successfully convert. I wanted to compile a list of users that were able to convert, where they were before they started, what worked, what didn't, and so far, all what I'm seeing is, is that starting from KK doesn't work, although we were told all along to keep KK. I also heard one user said that he had taken all OTAs to 5..1.1., still made the conversion process work, BUT, his phone was a developer phone to begin with but he accidentally locked it with a Retail ROM. I'm kind of a noob, myself, but from what I do know, I don't recommend taking any OTAs anyway past BOAF, otherwise the conversion "might not" happen, but there are a lot of people who have taken all OTAs so we'll see what happens with them.
Click to expand...
Click to collapse
I can't even get king root to root it constantly reboots my phone during rooting process I've tried different versions and it doesn't matter do you have any suggestions or point me in the direction to roll back to 4.4.4 I've been out of the game for a while so I've forgotten a lot of stuff on how to do this thank for all your help so far
Jimmy8 said:
I can't even get king root to root it constantly reboots my phone during rooting process I've tried different versions and it doesn't matter do you have any suggestions or point me in the direction to roll back to 4.4.4 I've been out of the game for a while so I've forgotten a lot of stuff on how to do this thank for all your help so far
Click to expand...
Click to collapse
Believe me, I'm with you right there, as well, been out of the game for so long. Thanks Verizon Retail locking. Anyway....
Where are you right now? Your Android version/Build Number.
joshskorn said:
believe me, i'm with you right there, as well, been out of the game for so long. Thanks verizon retail locking. Anyway....
Where are you right now? Your android version/build number.
Click to expand...
Click to collapse
5.0.1 / n910vvru1boaf

WIFI not working - tried everything - very frustrated

Hi all,
I have a AT&T Galaxy S4 i337. The WIFI doesn't work. It seems to be a very common problem as there are many fixes on the internet. I have tried them all and I don't know what to do now. It is running V. 4.3 and my baseband version is i337ucugoc4.
- Rooted. Installed Rom Manager, Terminal Emulator, SuperSU, and Reverse Tether so I could use the internet (because no wifi).
- Tried to install a new modem but could not find the exact modem file. I saw a list at http://forum.xda-developers.com/showthread.php?t=2496517 but didn't know which was good for my phone. I saw I337_UCUGOC3_Modem_RockRatt.zip but it ends in a 3 not a 4 as required for my modem.
- tried to update using the AT&T Software update. It stayed at "Checking for software updates...." and then said "Software update interrupted. No updates available. Check back in 24 hours". Don't know if that would have solved the WIFI problem anyhow.
- Tried again to install to 5.0 thru USB. Downloaded and installed it but when I rebooted, it was still 4.3
- Downloaded FXR wifi and ran it - no luck there.
- downloaded the modem file ATT_OC4_modules.zip and flashed it to the phone. It said SUCCESSFUL but there was no wifi afterwards.
- Adjusted the source code with terminal emulator as I saw in a youtube video. No success and I changed it back to the original.
- Downloaded wifi manager and tried turned off-then-on wifi.
- probably more things I have forgotten in the last three days.
I have tried everything I can find to try. It has been 3 days of trying - very frustrated. I would very much appreciate direction on this. To recap, I need to get wifi working and want to upgrade to lolipop.
Thanks so much,
Amber
amberblossom said:
Hi all,
I have a AT&T Galaxy S4 i337. The WIFI doesn't work. It seems to be a very common problem as there are many fixes on the internet. I have tried them all and I don't know what to do now. It is running V. 4.3 and my baseband version is i337ucugoc4.
- Rooted. Installed Rom Manager, Terminal Emulator, SuperSU, and Reverse Tether so I could use the internet (because no wifi).
- Tried to install a new modem but could not find the exact modem file. I saw a list at http://forum.xda-developers.com/showthread.php?t=2496517 but didn't know which was good for my phone. I saw I337_UCUGOC3_Modem_RockRatt.zip but it ends in a 3 not a 4 as required for my modem.
- tried to update using the AT&T Software update. It stayed at "Checking for software updates...." and then said "Software update interrupted. No updates available. Check back in 24 hours". Don't know if that would have solved the WIFI problem anyhow.
- Tried again to install to 5.0 thru USB. Downloaded and installed it but when I rebooted, it was still 4.3
- Downloaded FXR wifi and ran it - no luck there.
- downloaded the modem file ATT_OC4_modules.zip and flashed it to the phone. It said SUCCESSFUL but there was no wifi afterwards.
- Adjusted the source code with terminal emulator as I saw in a youtube video. No success and I changed it back to the original.
- Downloaded wifi manager and tried turned off-then-on wifi.
- probably more things I have forgotten in the last three days.
I have tried everything I can find to try. It has been 3 days of trying - very frustrated. I would very much appreciate direction on this. To recap, I need to get wifi working and want to upgrade to lollipop.
Thanks so much,
Amber
Click to expand...
Click to collapse
May I ask why is your bootloader is lollipop but your OS rom is still Jelly bean ( you said 4.3). It appears that you might have jelly bean kernel which will not work with lollipop modem and bootloader. Majority of the wifi problem is caused by the kernel and bootloader mismatched, assuming that your radio (modem) has no physical damage. Try to flash the OC4 kernel and see you still have the wifi problem.
If you want to upgrade to lollipop from Jelly bean, there are several guides on this forum explaining step by step.
I flashed the OC4 kernal - no change in wifi
sway8966 said:
May I ask why is your bootloader is lollipop but your OS rom is still Jelly bean ( you said 4.3). It appears that you might have jelly bean kernel which will not work with lollipop modem and bootloader. Majority of the wifi problem is caused by the kernel and bootloader mismatched, assuming that your radio (modem) has no physical damage. Try to flash the OC4 kernel and see you still have the wifi problem.
If you want to upgrade to lollipop from Jelly bean, there are several guides on this forum explaining step by step.
Click to expand...
Click to collapse
Thanks sway8966,
I flashed the OC4_update_from_OC3.zip file but there was no change - still no wifi. I wonder if I were to upgrade to lollipop would it automatically fix the problem because it would have the matching bootloader and OS rom? Do you think this might solve the problem?
Thanks again.
amberblossom said:
Thanks sway8966,
I flashed the OC4_update_from_OC3.zip file but there was no change - still no wifi. I wonder if I were to upgrade to lollipop would it automatically fix the problem because it would have the matching bootloader and OS rom? Do you think this might solve the problem?
Thanks again.
Click to expand...
Click to collapse
I do not know what included in the oc4 update from oc3.zip file. As I said before you could try flashing the OC4 kernel file and see whether your wifi is working or not.
Here is the link for the OC4 kernel. You need to flash it via odin.
If you do not have any particular reason to stick with Jelly bean you should upgrade to Lollipop or at least to Kit-kat.
Hi! I had an s4 variant with your problem the same, the wifi nope in none routers.
I gave this device to trash , because i discovered what "happened"
Some stock app, from samsung, masked as anything that i skipped to search (i have much precious time to loose, instead loose really, lost time BRITISH DEVICES IN EXT4 filesystem) what app exactly, is receiving data from samsung server to delete the /system/etc/wifi/bcmdhd.cal
I was obligated to reinstall this file 4 times, changed permission to r--r--r--T untill resolve. But was not sufficient, after this, my wifi, fixed again, but the phone at 8ยบ reboot, after , received a remote conmand again to turn the phone ridiculously slower, i lost my head and crashed this device on the wall, and nevermore i will use this name. Sorry,
All this happened just exactly, after install cwm and root sucessfully, without touch anything on the firmware. Something from samsung inc, is programmed to "detect" these 2 events, and send a "tick" to begin the hell in fire on this devices GT S-Xx
Sent from my XT687 using xda premium
won't boot past the SAMSUNG screen
sway8966 said:
I do not know what included in the oc4 update from oc3.zip file. As I said before you could try flashing the OC4 kernel file and see whether your wifi is working or not.
Here is the link for the OC4 kernel. You need to flash it via odin.
If you do not have any particular reason to stick with Jelly bean you should upgrade to Lollipop or at least to Kit-kat.
Click to expand...
Click to collapse
I flashed the OC4 kernel and it won't boot past the SAMSUNG screen.
amberblossom said:
I flashed the OC4 kernel and it won't boot past the SAMSUNG screen.
Click to expand...
Click to collapse
Your phone is probably in soft-brick now. You need to flash the 4.3 firmware via odin or You need to update to full kit-kat.
If you want to go kit-kat flash this NB1 firmware via odin. It is NB1 but the kernel is NC1 so that you can use towel root to root the phone. Anyway flash that firmware and see the phone is normally booting and wifi is working.
IT WORKED!!!
sway8966 said:
Your phone is probably in soft-brick now. You need to flash the 4.3 firmware via odin or You need to update to full kit-kat.
If you want to go kit-kat flash this NB1 firmware via odin. It is NB1 but the kernel is NC1 so that you can use towel root to root the phone. Anyway flash that firmware and see the phone is normally booting and wifi is working.
Click to expand...
Click to collapse
Thank you so much. It worked. I got my phone back and the wifi is working. Pretty nice. Thanks again. Now to figure out towel root (is that the best for my phone?). You are awesome.
couple more questions
sway8966 said:
Your phone is probably in soft-brick now. You need to flash the 4.3 firmware via odin or You need to update to full kit-kat.
If you want to go kit-kat flash this NB1 firmware via odin. It is NB1 but the kernel is NC1 so that you can use towel root to root the phone. Anyway flash that firmware and see the phone is normally booting and wifi is working.
Click to expand...
Click to collapse
I rooted with towelroot (verified with root checker). I installed superuser but didn't see how to remove bloatware. There are no apps in the apps list. How do I do that? Also, now that it is rooted, is it possible to upgrade it to lollipop? Thanks again.
amberblossom said:
I rooted with towelroot (verified with root checker). I installed superuser but didn't see how to remove bloatware. There are no apps in the apps list. How do I do that? Also, now that it is rooted, is it possible to upgrade it to lollipop? Thanks again.
Click to expand...
Click to collapse
I am glad to hear that it fixes your problem. The NB1 firmware (cooked by muniz_ri) is a live saver. Keep that one. Down the line if your phone screwed up used that one to revive your phone.
Majority of bloatware are system app as such they will not show up in the app bar To remove those you need an admin rights (root) hence we need to root the phone.
To remove the bloatware there are many bloatware remove apps. However they are not written to the specific phone and OS version as such you need to be very careful when you are using them.
I use titanium backup pro to either freeze or remove the bloatware one by one. You can find the list of bloatware for each version on the net. Another way is to install the lean custom rom.
If you want to upgrade to Lollipop you can do it. If somethings screws up you can use that NB1 to come back to Kitkat.
The latest lollipop for the sgh-i337 is OK2 but OK2 gave me some problem that I could not live with it so I stay at OC4.
If you want to upgrade to OK2 or OC4 do let me know. I will point you the guide and necessary files.
CyanogenMod
sway8966 said:
I am glad to hear that it fixes your problem. The NB1 firmware (cooked by muniz_ri) is a live saver. Keep that one. Down the line if your phone screwed up used that one to revive your phone.
Majority of bloatware are system app as such they will not show up in the app bar To remove those you need an admin rights (root) hence we need to root the phone.
To remove the bloatware there are many bloatware remove apps. However they are not written to the specific phone and OS version as such you need to be very careful when you are using them.
I use titanium backup pro to either freeze or remove the bloatware one by one. You can find the list of bloatware for each version on the net. Another way is to install the lean custom rom.
If you want to upgrade to Lollipop you can do it. If somethings screws up you can use that NB1 to come back to Kitkat.
The latest lollipop for the sgh-i337 is OK2 but OK2 gave me some problem that I could not live with it so I stay at OC4.
If you want to upgrade to OK2 or OC4 do let me know. I will point you the guide and necessary files.
Click to expand...
Click to collapse
I guess I will pass on lollipop if there was a problem with it. I looked around for a rom and saw CyanogenMod. It looked pretty good but they discontinued the installer. Can I download it on my PC, move it to the ext card on the S4 and install it from there? Without any changes to my current configuration of the S4? Thanks again.
amberblossom said:
I guess I will pass on lollipop if there was a problem with it. I looked around for a rom and saw CyanogenMod. It looked pretty good but they discontinued the installer. Can I download it on my PC, move it to the ext card on the S4 and install it from there? Without any changes to my current configuration of the S4? Thanks again.
Click to expand...
Click to collapse
I did not say lollipop has a problem, what I meant was I had some problem with lollipop OK2 as such I stay with lollipop OC4.
I took it as you are talking about the CyanogenMoD for the locked bootloader .
You can install that one. You need to install the safestrap first to flash that rom, as mentioned on that link. However, the link also mentioned that you can not make a phone call with that rom as such they stop developing that rom.
sway8966 said:
I did not say lollipop has a problem, what I meant was I had some problem with lollipop OK2 as such I stay with lollipop OC4.
I took it as you are talking about the CyanogenMoD for the locked bootloader .
You can install that one. You need to install the safestrap first to flash that rom, as mentioned on that link. However, the link also mentioned that you can not make a phone call with that rom as such they stop developing that rom.
Click to expand...
Click to collapse
Oh, I didn't understand. I think I would like to try to get up to lollipop. Can you point me to the kernel for that? Also, I have been trying to install CyanogenMod but am running into roadblocks. I think I might have succeeded finally because I now have a yellow triangle and a notice about non-AT&T system software (with a tiny notice - secure fail: kernel). I also had a difficult time installing TWRP as the installer was asking for a file format that the installer didn't download. From what I gather, CyanogenMod looks like a good all around OS and was easy to install when the installer was in play. But if there is another that would suffice but is easier to install, I think that might be a better idea. Could you suggest one?
Sorry about all these questions. I don't know why this is so difficult for me. I feel like an idiot. Thanks again.
amberblossom said:
Oh, I didn't understand. I think I would like to try to get up to lollipop. Can you point me to the kernel for that? Also, I have been trying to install CyanogenMod but am running into roadblocks. I think I might have succeeded finally because I now have a yellow triangle and a notice about non-AT&T system software (with a tiny notice - secure fail: kernel). I also had a difficult time installing TWRP as the installer was asking for a file format that the installer didn't download. From what I gather, CyanogenMod looks like a good all around OS and was easy to install when the installer was in play. But if there is another that would suffice but is easier to install, I think that might be a better idea. Could you suggest one?
Sorry about all these questions. I don't know why this is so difficult for me. I feel like an idiot. Thanks again.
Click to expand...
Click to collapse
SGH-i377 has locked bootloader as such we can not install custom recovery like TWRP or CWM. The only installers we have are safestrap and flashfire. When I was in Kit-kat I used safestrap. It is very troublesome to work with safestrap in lollipop so when I upgrade to lollipop I use falshfire instead.
I have two devices that are on cyanogen mod. I like cyanogen mod but I prefer touch-wiz rom over AOSP though.
The only cyanogen mod you can install is the one that I mentioned in my previous message. You need to use safestrap to install it.
For SGH-I337 you can only install the touch-wiz rom which are written for either safestrap or flashfire. I do not see any AOSP rom written for safestrap or flashfire.
What I did was flash NB1 via odin. root with towl root and install the flashfire. Flash the OC4 rom via flashfire and flash the OC4 bootloader via odin. After my phone boot to lollipop OC4, Installed flashfire and flash the Albe95 S6 port rom. I like to use the S6 features and that custom rom is a stable one. Do you think the process is easy enough?
To upgrade to Lollipop,
I assumed that you are back on NB1 and rooted. If not do that process first. (you mentioned that you installed the cyanogenmode)
Here is the guide telling you step by step how to install lollipop from NB1.
The guide was originally written for OC4 but when OK2 came out it was updated with OK2. So if you want to go to OK2, use the files that mentioned on the guide. If you want to go to OC4 use the file I posted below instead.
I337_OC4_Stock_Rooted_ROM.zip
I337_OC4_Stock_Rooted_Deodexed_ROM
I337_OC4_Bootloader.tar.md5
The choice between using normal and deodexed_rom is your call.

Categories

Resources