Hey, yesterday i tried to clean flash RR ROm (already was using it) and when i flashed the rom zip file, it showed patching system image uncondtionally , and flashing file 1 of 1 for like 30 min then i turned off my device. And from then, i have been stuck with oneplus logo, sometime twrp sometime oneplus recovery https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Tried this method bcz i thought my device was bricked but the last step failed. No i again got back to twrp through fastboot method
https://forums.oneplus.net/threads/...-custom-recovery-root-efs-backup-more.345478/
And one more thing, when i am copyingthe rom files from pc to device, the progress bar goes well upto like 50% and then suddenly closes. But copied file size is same as of original. Is this the main problem?
file not getting copied properly?
Now i am in twrp and cant even start the flash proces as it now says E: error executing updater binary in zip ' ROM Name' error flashing zip.
What should i do now? Just want to turn on my phone, no matter if its RR ROM or OOS rom . Please help.
Also again went to oneplus recovery using that unbrick method and then tried to install OOS 2.2.1 using adb sideload method, but it stops at 47% everytime. What could be the reason? Should i go to service center tomorrow because from wednesday i will be having my exams and i want my phone up and running by tomorrow evening. Please help me . It's an emergency. Also asked for help at xda RR ROm forum but no such help yet .
And is my motherboard damaged ? No, right?
Related
Please help needed!!
I'm stuck here for 3 days
Ok I'm going to tell everything I did,,
My Gionee E7 is indian version.
First I rooted my phone with kingo Root.
Than I flashed CWM chinese version.
I upgraded my system to kitkat and changed the recovery to stock.
I used it for a week than some how my music player and gallery were corrupted.
I don't have any rom so I download one but it was in chinese, flashed it to my gionee. than after rooting,,
I flashed the CWM, same I flashed weeks ago
Here my problem started :crying:
The CWM is not starting. I used recoery tool to boot into recovery after boot up it shows black screen. I used every method holding Vol+ and power button but the same result.
than I tired to get back to my stock recovery but it does the same.
flashed many times both recoveries but didn't worked.
I searched a lot and find a TWRP. I flashed it and wow it worked Finally I can boot into recoery mode.
Now I find the Nandroid backup of indian version. I made it a zip and flashed it through twrp.
My phone is back to indian version but its slow, not too much but its slow; camera, gallery and other apps take some time to open. I can't make or rcv phone calls. Now what i did is download the update form System update.
Now i got kitkat rom.zip but twrp failed to install it.
Some one on the internet was saying that its the problem with my Kernel. I have the latest kernel so CWM won't work cuz it uses old kernel and display drivers.
My
android version is 4.2.2
Kernel version is 3.4.0-svn2155
I also got TWRP for lolipop,
and I patched binary_update in my kitkat rom too but TWRP can't flash it
Thats my whooooolllleeeee story. "
I got stuck with this for almost 3 days now I'm damn tired can't do it anymore plz help :crying::crying::crying:
I figured it out by myself
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
AkashX4686 said:
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
Click to expand...
Click to collapse
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
No its not, it is working on 64bit windows very well.
In TWRP factory reset and format system and data, than install
Chinese 4.2 ROM. After that boot it and try it again.
It should work!
bllkarv said:
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
Click to expand...
Click to collapse
For me...problem!
there´s a cwm recovery that flashes over the kernel...
i flashed it and than i was unable to go to recovery, every time i tried the phone power off
Solution: Flash the stock boot.img
Use the file according to the Android version...
Help
I just rooted my gionee elife e7. Flashed the chinese recovery which seemed to be the only one which would be compatible. But, while changing a few setting using pimp my rom, the software just stopped working. Errors keep showing up on the screen - "system.ui is not working", "android app is not working", I cannot even go the settings because "settings is not working". Third party apps still seem to work, so, whatsap and stuff continue to function. Doing a factory reset or flashing firmware again seem to be the only viable option.
But, when I try to load up the bootloader using the power and volume keys, it gets stuck on the screen showing the gionee logo and it reads 'fastboot mode' in the bottom left hand side corner. So,
a. can you offer any advice which may be useful ?
b. can you share the link from where you got a TWRP recovery which will work on the Elife ?
c. do you have any idea what exactly went wrong here ?
Any help you can provide will be appreciated because, it's my mausi's phone and I will have a very tough time explaining what really went down here.
Regards,
Well, let me tell you, I DID see the other threads before posting this one about the topic, but believe me, none of the topics met my condition, and none solved my problem. :crying:
I have a Galaxy A5 (SM-A500G), and tried to flash CM12.1 unofficial TEMASEK version by @mygalaxya . I followed EVERY single step correctly, but when I tried to flash the ROM using TWRP, it said "Error executing updater binary in script."
I tried to rename 'a5lte' to 'a5ltedd' in updater-script in zip/META-INF/com/google/android
But, it didn't work.
Also, my stock firmware had stopped working a few days ago. The phone automatically switched off after running out of charge although I kept the charger connected throughout the night (if you understand what I'm saying ) And then, when I switched on the phone, it booted into TWRP. I chose Reboot and then System, but it just won't boot normally... It kept on rebooting into recovery mode..!! So, I finally gave up, and tried to flash CM12.1 into the phone. And, the above error came up.
What do I do? HELP...
Here's the link to the post by @mygalaxya ..
http://forum.xda-developers.com/sam...ev-help-to-create-cm12-rom-galaxy-a5-t3153129
Need help Urgent!!!!!!!!
I had rooted my phone successfully 1 year ago but while installing xposed privacy it asked unlock bootloader and changed to twrp recovery 2.8.7.0 but some problem occured i can not go after asus logo so i visited customer care and he installed kitkat 2.22.40.54 version with out locking that bootloader. After succesful usage of 1 year my settings option not opened it always show "unfortunately. com.android settings has stopped" so i tried to flash a new rom i wiped cache and data unfortunately system also.
so that im not able to flash new rom errors occurs are
1. E:unknown file system: 'osip'
E:unknown file system: 'osip'
E:unknown file system: 'osip'
E: Invalid block device on '/dev/block/zram0one......................................
2. E: Unable to locate page (system_readonly)
3. no MD5 file found even i downloaded the firmware from asus support (2.22.40.540 as well as 2.21.40.44)
4. assert failed: getprop("ro.build.asus.sku")=="ww" return code 8
5. E: Error executing updater binary in zip '/external_sd/.....................zip
(** note: i had not enabled usb debugging
when i try to flash rom using adb sideload it is not showing in the list even it is connecting as media transfer
through otg also not going i dont know it is not showing in the recovery)
thats the problem guys please help me out of this
ajay019 said:
Need help Urgent!!!!!!!!
I had rooted my phone successfully 1 year ago but while installing xposed privacy it asked unlock bootloader and changed to twrp recovery 2.8.7.0 but some problem occured i can not go after asus logo so i visited customer care and he installed kitkat 2.22.40.54 version with out locking that bootloader. After succesful usage of 1 year my settings option not opened it always show "unfortunately. com.android settings has stopped" so i tried to flash a new rom i wiped cache and data unfortunately system also.
so that im not able to flash new rom errors occurs are
1. E:unknown file system: 'osip'
E:unknown file system: 'osip'
E:unknown file system: 'osip'
E: Invalid block device on '/dev/block/zram0one......................................
2. E: Unable to locate page (system_readonly)
3. no MD5 file found even i downloaded the firmware from asus support (2.22.40.540 as well as 2.21.40.44)
4. assert failed: getprop("ro.build.asus.sku")=="ww" return code 8
5. E: Error executing updater binary in zip '/external_sd/.....................zip
(** note: i had not enabled usb debugging
when i try to flash rom using adb sideload it is not showing in the list even it is connecting as media transfer
through otg also not going i dont know it is not showing in the recovery)
thats the problem guys please help me out of this
Click to expand...
Click to collapse
Ok so as per my understanding , you have unlocked bootloader .
You also have custom recovery twrp 2.8.7 installed . Right ?
Since you wipe system , your phone is without any os right now .
So now what you do is download any stock modified rom for your device .
Download latest twrp by xanwar . Flash the twrp zip (by xanwar)from twrp 2.8.7 (already installed ).
Voila ! Now you can flash any custom rom or stock based modified roms .
I don't know this is what you asking
Boomshiva said:
Ok so as per my understanding , you have unlocked bootloader .
You also have custom recovery twrp 2.8.7 installed . Right ?
Since you wipe system , your phone is without any os right now .
So now what you do is download any stock modified rom for your device .
Download latest twrp by xanwar . Flash the twrp zip (by xanwar)from twrp 2.8.7 (already installed ).
Voila ! Now you can flash any custom rom or stock based modified roms .
I don't know this is what you asking
Click to expand...
Click to collapse
yes i unlocked bootloader and i have custom recovery twrp 2.8.7.0 installed but here the problem is i didnt enabled usb debugging mode so that i'm not able to flash and the errors are as above mentioned. modified rom you are saying means i'm using 2.22.40.54 kitkat so may i able to install lollipop or higher version.one more thing i dont know what these errors mean..
ajay019 said:
yes i unlocked bootloader and i have custom recovery twrp 2.8.7.0 installed but here the problem is i didnt enabled usb debugging mode so that i'm not able to flash and the errors are as above mentioned. modified rom you are saying means i'm using 2.22.40.54 kitkat so may i able to install lollipop or higher version.one more thing i dont know what these errors mean..
Click to expand...
Click to collapse
Ok . I understand now .
1)donwlaod latest twrp by xanwar . And flash it. So now you have latest recovery installed on your device .:fingers-crossed:
2)download gecko premium rom from Android development section here on xda . Place it on SD card .
3)reboot to recovery , wipe everything except SD card . (You will lose everything from your phone .)
4)if step 3 gives error then format data not wipe .
5)repeat step 3
6)reboot to recovery now .
Flash the rom that you downaoded (gecko premium )
7)reboot system .
8) do this first then report back .
Boomshiva said:
Ok . I understand now .
1)donwlaod latest twrp by xanwar . And flash it. So now you have latest recovery installed on your device .:fingers-crossed:
2)download gecko premium rom from Android development section here on xda . Place it on SD card .
3)reboot to recovery , wipe everything except SD card . (You will lose everything from your phone .)
4)if step 3 gives error then format data not wipe .
5)repeat step 3
6)reboot to recovery now .
Flash the rom that you downaoded (gecko premium )
7)reboot system .
8) do this first then report back .
Click to expand...
Click to collapse
one more mistake bro i didnt find xanwar twrp 3.0.2.0 so i browsed for another one which is 3.0-m-4.0 and flashed it successfully but reboot in recovery is not going then powered off the phone and started to go into recovery mode but in recovery mode touch is not working so only hanged i repeatedly switched off and on but same result. so what to do now.....? i think im having no other choices than using droidboot but adb side load is not working bz i didnt enabled usb debugging mode. in pc it is showing connected to pc until i started adb when i started it disappearing.
ajay019 said:
one more mistake bro i didnt find xanwar twrp 3.0.2.0 so i browsed for another one which is 3.0-m-4.0 and flashed it successfully but reboot in recovery is not going then powered off the phone and started to go into recovery mode but in recovery mode touch is not working so only hanged i repeatedly switched off and on but same result. so what to do now.....? i think im having no other choices than using droidboot but adb side load is not working bz i didnt enabled usb debugging mode. in pc it is showing connected to pc until i started adb when i started it disappearing.
Click to expand...
Click to collapse
I don't understand the logic behind not enabling usb debugging !
No need for all that .
If using windows then make sure the all driver shows up when you enter into fastboot mode .
Check from control panel of your PC . If not then reinstall the drivers . It must show asus composite ...........Blah Blah blah ...Android bridge interface .(well i use Linux so dont recall properly ).
Once the desired drivers are present you are good to go ahead .And flash proper twrp .And do the rest .
Bottom line :check drivers
Flash the latest twrp (24 July build) link below
https://www.androidfilehost.com/?w=files&flid=52033
Boomshiva said:
I don't understand the logic behind not enabling usb debugging !
No need for all that .
If using windows then make sure the all driver shows up when you enter into fastboot mode .
Check from control panel of your PC . If not then reinstall the drivers . It must show asus composite ...........Blah Blah blah ...Android bridge interface .(well i use Linux so dont recall properly ).
Once the desired drivers are present you are good to go ahead .And flash proper twrp .And do the rest .
Bottom line :check drivers
Flash the latest twrp (24 July build) link below
https://www.androidfilehost.com/?w=files&flid=52033
Click to expand...
Click to collapse
thank you bro successfully flashed new rom GECKO-premium-ROM-3.24.40.87-v1.0. problem solved. may i know how to install and activate xposed installer for this version and one more thing may i change the recovery any time with out disturbing os?
ajay019 said:
thank you bro successfully flashed new rom GECKO-premium-ROM-3.24.40.87-v1.0. problem solved. may i know how to install and activate xposed installer for this version and one more thing may i change the recovery any time with out disturbing os?
Click to expand...
Click to collapse
Flash xposed zip . Sdk21 v86 works flawlessly ,
Then download the apk for xposed and install it as normal apk you can change recovery anytime but be sure that you flash your devices twrp only not others .
Hello, i decided to open new thread because I nowhere find solution. My problem is that after flashing my moto g2 with omni 6.0.1 it get stuck on warning message (about unlocked bootloader). Now I can only get into bootloader menu, connect phone to PC (it's showing dewice as motorola dadb interface),I can only flash twrp using fastboot (fastboot boot twrp.img) and that's it. I can not flash anything permanently to the phone: any custom recovery, any rom,can't fix it with logofix.It just look like phone doesn't accept any flash. I tried also to change boot and other img but with no succes, always after any operation when I reboot phone it's get to warning message.
My phone is motorola 2G xt1068, 8gb, bootloader ver 48.87. Once I tried to flash it with retail rom from sd card via twrp 3.8.0.1 it shows that previous system was omni-titan 6.0.1 and retaildsdsall can not be flash,always shows error 7.
I wonder if I can flash it with upper version of omni: 7.0.1 to fix the problem with booting the phone.
If You could give me any advise how to solve the problem, I would be very appreciate.
Waitng for your reply Guys.
After a lot of tryes I found that anythig I do on the phone after restart it's getting to the same state, even if I manually deleted folder "Firmware", after reboot it's going back. When I prepared Moto for installing new rom using Philz recovery, all the data stay on it's place ( I mean private data like thumbnails in DCIM folder etc), nothing dissapeared. It's look like it have some copy of the system in internal storage and always after rebooting it's recovering it back, even if the system is flashed by new rom.
Have U any idea what's wrong with this phone?
Additinally I found that a lot of internal memory is busy: over 4500MB and free is only 780MB. Even after wiping everything, also formatting system.Should it be like this?
Edit: 2018-02-15
Ok, if noone could help me let's treat it as a blog.
Digging in google I found spanish site with a lot of custom roms for motorola. Now I'm trying one by one till I found the right one.
It's a pitty that Father's of the omni rom leaving me lonely in that situation, I think that they are the best of source of informations about that rom.
2018.02.19
I tried to install OmniRom 6.0.1 Homemade but on the beginning I had the infothat installation failed with error 7. So I found the solution to change the information in meta-info folder.I did it but when instalation started after "symlinkig" it stopped with error: some symlinks failed, error 7. And again I stucked.I feellike I'm very close of the solution but I need help. I'm using twrp 3.2.1.0 running via fastboot (boot twrp.img).
Hello,i tried to root my phone.after flashing twrp if I try to reboot the system it just shows asus logo for like 15 seconds and then switch off.i can't switch on my phone.i can go to twrp recovery mode but that's that.
Plz help.
Indransu said:
Hello,i tried to root my phone.after flashing twrp if I try to reboot the system it just shows asus logo for like 15 seconds and then switch off.i can't switch on my phone.i can go to twrp recovery mode but that's that.
Plz help.
Click to expand...
Click to collapse
Hey, I faced the same issue 2days ago and yup I found a solution...
So, the first step you will need to follow is to flash the stock recovery via fastboot and then download the stock firmware zip file from Asus site and copy the zip file to SD Card. Now go to the recovery and then select "Apply update from Sdcard" and select the zip file and let the process complete .
In my case it took about 20-25 minutes so don't get tensed regarding the time...
facing same prblm..cant i use any custom rom?
Rishabh.Kashyap said:
Hey, I faced the same issue 2days ago and yup I found a solution...
So, the first step you will need to follow is to flash the stock recovery via fastboot and then download the stock firmware zip file from Asus site and copy the zip file to SD Card. Now go to the recovery and then select "Apply update from Sdcard" and select the zip file and let the process complete .
In my case it took about 20-25 minutes so don't get tensed regarding the time...
Click to expand...
Click to collapse
im using asus zenfone max 2016 sd 615.i hv successfully flash twrp nd i hv taken the stock back up.bt whenever i tried to flash a custom rom it shows error 7.thn i edited the script thn i flashed the rom..this time it successfully flashed but i treid to rebbot to system it shows asus logo thn get swtich off.pls help if u knw anything
Kaustav365 said:
im using asus zenfone max 2016 sd 615.i hv successfully flash twrp nd i hv taken the stock back up.bt whenever i tried to flash a custom rom it shows error 7.thn i edited the script thn i flashed the rom..this time it successfully flashed but i treid to rebbot to system it shows asus logo thn get swtich off.pls help if u knw anything
Click to expand...
Click to collapse
Yeah I have also faced this issue and the only way to get your device working again is by flashing your stock ROM again either via Asus flash tool or via your stock recovery.
To flash using Asus flash tool...
Download the stock recovery file and flash it.
To flash with recovery...
Find and download stock recovery and flash it to your device via ADB
And then download the zip file for your device for your device from Asus official site and put it on your SD card.
And then select apply update from SD card and let the process complete...
For more help join my WhatsApp group...
https://chat.whatsapp.com/85ioy72WO3kHqeaWqxFXfZ
So i can not use any other rom except the stock rom?
Though i took backup of the stock rom befor wipe out data.. So i recover it..
Btw thnx bro
After done flash twrp img file through adb on asusu z010d by pressing vol up and power key i cant go to twrp . My screen goes of the exact time twrp open. What should i do? Still i can use my phone by rebooting. But cant reach twrp. Any solution?