Related
Hello,
I install z4mod, and I patch kernal, and it's fine, after that I don't what I do , I do convert to filesystem, after that open till galaxy s come the shutdown.
I use froyo 2.2
please help me?
I can not open phone in download mode or recovery by using 3 buttons.
All I can say is that if you cannot access download mode you're in trouble. :/
so what can I do,
any idea
If you can't get into download mode you may have bricked your phone, the only way to fix it is to make a homemade jig or put your phone in the oven. I'm not sure what your preference may be...
EDIT: In future please do not post in this section just to get your thread more attention .
I use
Z4mod over in I9000 converts data to ext2
and it's not open download mode from begening when it normal mode,
any news,,,,
PaulForde said:
If you can't get into download mode you may have bricked your phone, the only way to fix it is to make a homemade jig or put your phone in the oven. I'm not sure what your preference may be...
EDIT: In future please do not post in this section just to get your thread more attention .
Click to expand...
Click to collapse
NEVER do that nonsense.
dnsp said:
NEVER do that nonsense.
Click to expand...
Click to collapse
yeah, not with the oven
but the trick with the hair blower works and also just recently has rescued another unfortunate soul (not me)
Isn't it possible to get into download mode by adb? I did it a few times, but i can find the tutorial only on a german forum called android-hilfe.de.
It worked for me a few times:
1: Install Kies (probably you did already)
2. install adb for windows ( don't know where to get it, sorry)
3. install odin 1.3
4. open command line and navigate to adb folder
5. start odin
6. place command line-window and odin window so, that you can see both.
7. write in command line: "adb reboot download" and press enter ( starts daemon)
8. remove battery
9. connect the phone to pc using usb cable
10. put the battery in the phone again
11. write in command line: "adb reboot download", DO NOT PRESS ENTER
12. wait until it shows the battery symbol on your phone, indicating that its loading. press power button
13. now look at odin. when the Com-Port becomes yellow, press the enter button in command line, where you wrote "adb reboot download" before.
Now you are in DL-Mode.
Hope it works and someone maybe can give you a better written tutorial with a link to adb. Like i said, it worked for me.
eeegamer said:
Isn't it possible to get into download mode by adb? I did it a few times, but i can find the tutorial only on a german forum called android-hilfe.de.
It worked for me a few times:
1: Install Kies (probably you did already)
2. install adb for windows ( don't know where to get it, sorry)
you mean adbRecovery
3. install odin 1.3
4. open command line and navigate to adb folder
you mean by command prompt, can give me simple,
5. start odin
6. place command line-window and odin window so, that you can see both.
7. write in command line: "adb reboot download" and press enter ( starts daemon)
8. remove battery
9. connect the phone to pc using usb cable
10. put the battery in the phone again
11. write in command line: "adb reboot download", DO NOT PRESS ENTER
12. wait until it shows the battery symbol on your phone, indicating that its loading. press power button
13. now look at odin. when the Com-Port becomes yellow, press the enter button in command line, where you wrote "adb reboot download" before.
Now you are in DL-Mode.
Hope it works and someone maybe can give you a better written tutorial with a link to adb. Like i said, it worked for me.
Click to expand...
Click to collapse
thanx bro,,
Plz plz don't do stuff to your phone if you don't have 3button working.
I beg you.
Apply the 3button patch to get it working then proceed.
thanx eeegamer
but give me
error: device not found
I do what you said
Daneshm90,
the 3 butons not work with me, before the I got this problem, it's from the factory,
almuhajir said:
Daneshm90,
the 3 butons not work with me, before the I got this problem, it's from the factory,
Click to expand...
Click to collapse
Yes but there are patches on this forum that fix that.
Research and the world is yours
Daneshm90 said:
Yes but there are patches on this forum that fix that.
Research and the world is yours
Click to expand...
Click to collapse
please help, my head was broken, from morning I research,
Well firstly your original post is very confusing.
Im assuming english isn't your first tongue, if not plz use something like google translate which might do a better job.
Is ur situation that you want to flash something and don't know how ? Or you flashed something and can't boot into the os and have neither download mode / recovery mode at ur dispense ?
I assume you are saying that now when you are switching on your phone you are not getting startup screen of I9000 and you are getting a small icon showing broken connection with phone and PC.
If this is the case, you can try doing following trick
1. switch off phone and remove battery
2. Plug your USB with phone and PC
3. Start ODIN V3
4. Now press vol down + menu (Centre button) and power on
5. Insert your battery
6. If Odin will show your phone connected you are safe
7. if not try it again (do it 10 times)
Once Odin will detect your phone...flash any stock ROM from forum.
If unfortunately this does not work, then use hot-blower option.
1. Switch off your phone take out battery
2. use hot blower (hair dryer or something else) on the part where battery is placed.
3. Heat till the time you can tolerate...dont worry nothing will happen to Galaxy
4. Now press vol down + menu (Centre button) and power on
5. Insert your battery
6. Your phone should show yellow screen of downloading
Above trick seems insane but believe me it saved me (Thank God)
Galaxy S can not be unbricked (at least easily by any RM) I have faced this situation many times and come over it.
Let me know how it goes.
Before all of these I install OneClickLagFix v2.2, but I got same problem, and I use adbRecovery and I solve the problem.
First I install z4root and i root my device, then I install z4mod and I patch device kernel, after that, I choose converts data to filesystem, then the device rebooted automatically, until show logo GALAXY S, then the screen come black and vibrate allways,
The problem also when I connect it to USB my computer does not get the device,
But in the problem I have it now the adbRecovery not do any thing
Oh you are safe then...
Press vol up + menu + power button
once it shows Samsung logo leave the power button but keep pressing menu + vol up. After 4 seconds leave these button also.
Your phone should go to recovery mode.. then flash any rom..
If this does not work then use below:
1. switch off phone and remove battery
2. Plug your USB with phone and PC
3. Start ODIN V3
4. Now press vol down + menu (Centre button) and power on
5. Insert your battery
6. If Odin will show your phone connected you are safe
7. if not try it again (do it 10 times)
Once Odin will detect your phone...flash any stock ROM from forum.
almuhajir said:
thanx eeegamer
but give me
error: device not found
I do what you said
Click to expand...
Click to collapse
C:\android-sdk-windows\tools>adb ls
Android Debug Bridge version 1.0.26
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this ocmmand with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] <file> - push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-s' means install on SD card instead of internal storage)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb help - show this help message
adb version - show version num
DATAOPTS:
(no option) - don't touch the data partition
-w - wipe the data partition
-d - flash the data partition
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.
C:\android-sdk-windows\tools>
C:\android-sdk-windows\tools>adb devices
List of devices attached
1000efxxxx758 device
C:\android-sdk-windows\tools>
Updated ADB and Fastboot from Androiod SDK (Pkg.Revision=24.0) dd 11/07/2016
ADB - version 1.0.36
Revision fd9e4d07b0f5-android
Download: fastboot_adb(1.0.36)_110716_r24.0.rar
The last SDK Platform-Tools for Win, Linux and Mac you can always find here - https://developer.android.com/studio/releases/platform-tools
Arhive:
ADB and Fastboot from Androiod SDK (Pkg.Revision=21, 16 Oct 2014)
*Updated ADB to version 1.0.32
*Updated Fastboot to latest version
Download:
fastboot_adb(1.0.32)_071114_r21.rar
sorry for being a noob and asking for another device in a different forum,
but will these adb drivers also work with nexus 4???
need them to sideload 5.0.1
IS this for android 5.0 GPE?
http://forum.xda-developers.com/htc-one/general/guide-windows-8-1-fastboot-adb-t2970692
i have anaged to get it working after expereincing the problems stated here by others ... follow my steps here for those who still have trouble
lewonsky said:
IS this for android 5.0 GPE?
Click to expand...
Click to collapse
Yes, this for all version. It' latest update from official Android SDK Platforms.
See link in OP.
Golv said:
ADB and Fastboot from Androiod SDK (Pkg.Revision=21, 16 Oct 2014)
*Updated ADB to version 1.0.32
*Updated Fastboot to latest version
Download:
fastboot_adb(1.0.32)_071114_r21.rar
Click to expand...
Click to collapse
I think you forgot to mention that this is only for Windows. So it does not work for Linux or Mac.
Quick, fast, no frills, just the necessary files itself. Hopefully this thread gets updated whenever a new release comes up
thanks, nice share bro :good:
how to use those files
I thank you for the files but... how are we supposed to use them. I ask since I'm new to adb. And need this vision of adb to sideload to my fire hd6
[email protected] said:
I thank you for the files but... how are we supposed to use them. I ask since I'm new to adb. And need this vision of adb to sideload to my fire hd6
Click to expand...
Click to collapse
open a command window and change directory to the folder where adb.exe is installed. Then you can use adb commands. Commands syntax is as follow:
Code:
adb [target] <command>
You only need to specify the [target] if you have more than 1 android device or emulator connected simultaneously, otherwise the command will be directed to the only connected device, so the syntax will be:
Code:
adb <command>
So if you want to sideload a rom to your device, boot in your custom recovery and start the "sideload" mode.
In the command window:
Code:
adb sideload my_rom.zip
Don't forget that the rom.zip must be in the same folder where adb.exe is
If you want to use "adb push" instead of "adb sideload" then boot in custom recovery (not in sideload mode) and use the following command:
Code:
adb push my_rom.zip /sdcard
You can read more about adb commands here: http://developer.android.com/tools/help/adb.html#issuingcommands
adb sideload explained here: http://android-revolution-hd.blogspot.in/2013/12/ow-to-use-adb-sideload.html
If you have more question about what file to sideload or push a rom to your device, you should ask in the correct forum, Amazon Fire HD 6 forum is here: http://forum.xda-developers.com/fire-hd
thank u
save my day
How do you install the new adb 1.0.32 over the old version and will it work with the moto X 2014?
its dosnt work for me
and i need it ((
every phone i want use sideload , its say me , use adb 1.0.32 or newer
and when i want use adb 1.0.32 , show me this error in all adb commands :
adb server is out of date. killing...
ADB server didn't ACK
* failed to start daemon *
error: unknown host service
what should i do ?
update adb
[email protected] said:
I thank you for the files but... how are we supposed to use them. I ask since I'm new to adb. And need this vision of adb to sideload to my fire hd6
Click to expand...
Click to collapse
go to this website: https://fl1.androidfilehost.com/dl/...803384/minimal_adb_fastboot_v1.3.1_setup.exe?
download and install it to your computer, then try to sideload it through there.
if that doesn't work just download the stand alone SDK from the android studio website and after its downloaded, open the .rar file and extract it to a new folder to your desktop. after that open it and search for a folder that says platform tools and look for the ADB .exe file and copy it, then go to your C drive and go to programs and try to find the android studio folder, when you have located it open it and look for a folder named platform tools, then delete the adb.exe in that folder and paste the new one in there or you can probably just copy the whole platform tools folder and replace the other one in the C drive.
I hope this helps, if it doesnt just message me and im sorry for the late reply.
alishadlou said:
* failed to start daemon *
error: unknown host service
what should i do ?
Click to expand...
Click to collapse
this usually means the phone is not communicating with your PC.
- either your phone is corrupt
- the connection is corrupt
- or the cable is bad
Tip: add the path of ADB.exe to your system Environment Variables, so you can call it w/out first navigating to it.
- Right click Computer > Properties > Advanced system settings
- Environment Variables ... > edit "Path" by adding the path to ADB.exe.
ie.
Windows 10 x64, i simply add: D:\PortableApps\ADB
for other Windows, you may have to add to the end of "Path", click edit > scroll to the end > add ;D:\PortableApps\ADB;
(don't forget to add the semicolon at the end)
Now you can simply launch Command Prompt and enter: ADB sideload *file*
Updated ADB and Fastboot from Androiod SDK (Pkg.Revision=24.0) dd 11/07/2016
ADB - version 1.0.36
Revision fd9e4d07b0f5-android
Download: fastboot_adb(1.0.36)_110716_r24.0.rar
Not working on Android 6.0
This and older versions will not work on Samsung S7E for system backup and restore.
It accepts the commands, but the confirmation popup supposed to open on the device never does. For a few 6.0 users on other devices, it opened up but the backups were not really completed.
thanks bro. nice share :good:
Thanks, you save me too much time!!
my adb was working fine for my Note 4. I followed the instructions to upgrade bootloader
https://forum.xda-developers.com/no...t/howto-bootloader-unlock-upgrade-to-t3398144
Now, I keep getting device offline when used adb devices command. Do you think, upgrading ADB will solve this? thank you
Please note, I can only speak with any degree of certainty about devices bought from Play / Moto. I cannot attest to the accuracy of this information for US carrier versions etc. Anything you do is at your own risk
Contents / Thread overview
Introduction
What is Fastboot?
What is adb?
How to install adb and fastboot
How to test adb and fastboot work
OK Gimme some useful fastboot commands please!
OK Gimme some useful adb commands please!
A little more about using Windows command prompt
Myth Busters
Introduction
adb and fastboot are very useful command line tools. They can be used from Windows, Linux or Mac to carry out tasks on your android device, such as moving and backing up files, rooting and restoring your phone to it's factory state. Understanding how to use these tools could save your phone when you get yourself in trouble. This is especially true of rooted users. Particularly those of you who are "new to the scene". You definitely should read and understand this thread before you do ANYTHING root related.
This thread is not intended to be a non-exhausted reference. It is merely here to give an overview of the most basic of basics
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is fastboot?
Fastboot comprises of 2 components.
1) Fastboot mode on the phone (The Bootloader)
2) Fastboot tool on your computer
Fastboot is a small command line tool that you can use from your computer whilst the phone is connected via USB and you are booted into the bootloader. The most common uses for fastboot are:
Unlocking the bootloader - needed as part of the rooting process
Flashing a custom recovery to the device - needed as part of the rooting process
Flashing factory images - used for saving / trestoring your device back to stock
Being able to do these 3 things are essential before rooting. Many new users skip learning these and use a toolkit to root. As a result, when they mess up and we try to explain what they need to do to fix their issues, it becomes very difficult for us to help as fastboot is not understood. It is YOUR responsibility to understand these things BEFORE you mess up.
What is adb?
adb is another small command line tool that stands for "Android Debugging Bridge". Again, it can be used from a computer connected via USB to your android device. It can be used whilst the device is booted into Android or (if you have a custom recovery), it can be used in recovery too, unlike fastboot (yes, adb and fastboot are NOT the same thing) which can only be used in the bootloader.
adb can be used to push files to (or pull files from) your phone. It can also be used to execute many of the commands available in Linux terminals (Or Android terminal emulators) on the device itself. We're not here to cover all these commands however. We just want to cover the basics.
How to install adb and fastboot
adb and fastboot are very easy to install and can be installed on Windows, Linux and MAC computers. The Windows install can be a little bit more complicated than the other 2 and may need additional drivers installing too.
Windows.
There is a very handy tool that can install adb and fastboot in 15 seconds. It is recommended that you use this to install adb and fastboot. Please see the link immediately below for that tool:
ADB, Fastboot and Drivers - 15 seconds ADB Installer - Really quick and easy way to install adb and fastboot (by @Snoop05). Download links are at the bottom of post 1.
This tool asks if you want to install adb and fastboot (to which you should answer Y) and then creates c:\adb\adb.exe and c:\adb\fastboot.exe
It then asks if you want to install it system wide .. This is asking to install for all windows users. < 15 second installer needs updating to SDK 23, which is required for latest Android versions.
Download the latest SDK (adb and fastboot) versions here: https://developer.android.com/sdk/index.html (Scroll down to SDK tools only) then download the Windows *Installer*.
Open the installer and select "Platform-tools" and install the packages. This should create "C:\Program Files (x86)\Android\android-sdk\platform-tools"
Now we want to set this path as a Windows Environment variable PATH to make the executables work system wide:
right-click computer > properties > advanced > environment variables.
under system variables click "path" and click "edit"
at the end of the line, add the below:
Code:
;C:\Program Files (x86)\Android\android-sdk\platform-tools
Please note, the semi-colon ; is VERY important.
You may also need to install drivers.
Here is a link to the Google USB Driver: DOWNLOAD THIS
Code:
To install on Windows 7:
- Ensure existing drivers are uninstalled first*
- Extract the zip to c:\adb (created earlier by the installer)
- Right-click "Computer" > Manage in windows and choose "Device Manager"
- Boot the Nexus 6 to the bootloader (Volume down + Power) and connect the USB Cable
- Watch for any new devices with exclamation marks appearing
- Right-Click the new device > Update driver software
- Choose the "browse" method and browse to c:\adb, find teh folder you extracted then follow the wizard to the end - using amd6 64 if you're on a 64 bit system and i386 if you're on a 32 bit system.
*To uninstall existing drivers, boot into Android and connect the USB cable. Monitor device manager for the device showing up. To uninstall the device, right-click it to uninstall it. At the prompt, ensure you also choose to delete the driver. Repeat this for bootloader and recovery.
Code:
To Install on Windows 8, you may need to additionally disable driver enforcement
- From the Metro Start Screen, open Settings (move your mouse to the bottom-right-corner of the screen and wait for the - -- pop-out bar to appear, then click the Gear icon).
- Click ‘More PC Settings’.
- Click ‘General’.
- Scroll down, and click ‘Restart now’ under ‘Advanced startup’.
- Wait a bit.
- Click ‘Troubleshoot’.
- Click ‘Advanced Options’
- Click ‘Windows Startup Settings’
- Click Restart.
Once that is done, your Windows computer is configured for adb and fastboot.
In device manager, the device should show up as below, depending whether you are booted into recovery or bootloader...
Recovery - Android Device > Google Nexus 4 ADB Interface
Bootloader - Android Device > Google Nexus 4 Bootloader Interface
If it shows as something different, either you have existing drivers in the way or something went wrong.
Linux and Mac
Here is a really simple tool to install adb and fastboot on the above OS. The only expectation is you know how to open and run a terminal command. Please see the link immediately below:
Nexus Tools 2.2 (Featured by XDA) - adb and fastboot installer for Linux and Mac (by @corbin052198)
Once you have installed adb and fastboot from the above link, you're ready to go.
How to test adb and fastboot work
As previously mentioned, adb and fastboot are both command line tools. That means you must run these tools from command prompt (cmd in Windows) or Terminal (Linux and Mac).
Remember earlier, I mentioned that fastboot can only be used in bootloader? and adb can only be used in Android (or custom recovery - lets cover that later)? We can use the command "fastboot devices" and "adb devices to see if we have adb and fastboot working correctly.
Lets try it.
Boot your phone into android
Connect it to your computer via USB
Open cmd (start > type "cmd" on Windows) or Terminal (Mac/ Linux
Type in the windows "adb devices" and press enter
Here is what we don't want to see:
Notice how there is nothing underneath where it says "List of attached devices" That means it cannot see any device
Here is what we DO want to see:
We can see that there is now a device listed.
OK lets test fastboot. Unplug the USB and turn off the phone. When it is off, hold down Volume down + power until you feel the vibrate. You will now be in the bootloader. Reconnect the USB cable.
In the same window (cmd or terminal) we're going to now type "fastboot devices".
Again, here is an example of what we don't and do want to see:
If in both modes, you can see your devices "Serial Number", then you know they are both working.
Please note that if you cannot get adb and fastboot to work "system wide", you can open the command prompt to the location of the adb and fastboot executables exist and try from there.
OK Gimme some useful fastboot commands please!
Here are some of the most useful fastboot commands you will come across. Fastboot is used mostly for flashing images to the devices partitions on the internal memory.
Code:
fastboot oem unlock
This unlocks your bootloader and allows you to flash a recovery to root. WARNING, this will wipe your device. Rooting the N6 is essentially unlocking the bootloader, flashing a recovery and then putting the SuperSU zip on your sdcard and flashing it via the recovery. This thread covers rooting: [HOW-TO] The Nexus 6 All-In-One Beginner's Guide by @xBeerdroiDx
Code:
fastboot flash recovery recovery.img
This will flash a recovery.img to the recovery partition. The command is broken down into "fastboot flash" (what to do) "recovery" (where to flash to) "recovery.img" what to flash there. In the terminal or command prompt, you cannot just type "recovery.img" though. It has to be the path to where the recovery image is. For example, if my recovery image is on my desktop, I would have to type:
Code:
fastboot flash recovery c:\users\rootsu\desktop\recovery.img
It is worth noting, that it IS case sensitive, meaning if your file is called Recovery.img, you must type the capital R...
Other things you would flash:
Code:
fastboot flash system system.img
fastboot flash boot boot.img
These will flash the system image (ROM) and boot image (kernel) as you would if you were returning to stock.
A full guide to returning to stock can be found here: [TUTORIAL][GUIDE][HOW TO] Flash Factory Images || Unroot || Relock bootloader by @Mr hOaX
You can also boot into a recovery.img without flashing it...
Code:
fastboot boot c:\users\rootsu\desktop\recovery.img
which is "fastboot boot" (what to do) "c:\users\rootsu\desktop\recovery.img" what to do it with. As you may have noticed, we did not define the recovery partition in this command, that's because we're not flashing it....
OK Gimme some useful adb commands please!
At the moment, we are going to assume you have a custom recovery and you have booted into recovery. The reason for this is using adb in recovery can be much simpler.
Here are some useful scenarios for using adb.
Backup your sdcard to your PC
Code:
adb shell
mount data
exit
adb pull data/media/0 c:\MyBackup
**Please note, some recoveries may "mount data" automatically on boot, so don't be disheartened if you get an error stating device or resource busy. This probably just means you can't mount what is already mounted**
/data/media/0 is the real location of /sdcard for your information. Also referred to as "The mount point". What we have done here is "adb pull" (what to do) "data/media/0" (what to move) "c:\MyBackup" (where to move it to)
Push a zip file from your PC to your sdcard (useful if you wiped your sdcard and rom)
Code:
adb shell
mount data
exit
adb push c:\rom.zip data/media/0
What we have done here is "adb push" (what to do) "c:\rom.zip" (what to move) "data/media/0" (where to move it to)
You can of course also use adb to push and pull files to and from /system too. You just need to:
Code:
adb shell
mount system
exit
I mentioned earlier that using custom recovery is much easier for adb than whilst booted into Android. You need to ensure you have a kernel that allows insecure adb before you do anything with system and data partitions. You also need to ensure that USB debugging has been enabled in developer options.
For example, to mount system to pull files whilst android is running you have to:
Code:
adb root
adb shell
mount -o rw,remount /dev/block/platform/msm_sdcc.1/by-name/system /system
...which is clearly a little bit more involved, so I recommend you use recovery for adb push and pull. You can find more detailed information on adb here: http://developer.android.com/tools/help/adb.html
A little more about using Windows command prompt
One thing to understand is that like Windows, command prompt (cmd.exe) works with directories (or folders if you like). The Linux and Mac terminals are the same, but most linux users, we expect you would already know this.
Here you will see I have downloaded a recovery image that I want to flash using fastboot.
As you can see, the recovery.img is located in C:\users\rootSU\Desktop
Usually when you open the command prompt from the start menu, or run command, the command prompt will default to your user location as seen below:
So lets try and fastboot flash recovery recovery.img...
It fails with a not-too-accurate error message. It has failed because you have not told it where the recovery image is. It assumes it is in the directory as listed in the prompt
So, how do we deal with this? Well, there are 3 ways.
1) We tell the command prompt where the recovery.img actully is in the command itself
Success! As you can see, we have told the command that the location for the file is Desktop\recovery.img
2) We can change the directory in command prompt to the directory where the file is. In this example, we change directory to "Desktop". The change directory command is "cd " or in this case "cd Desktop"
3) ...and possibly the simplest method. We hold shift whilst we right-click on the folder we want to change directory to, and directly open a command prompt there:
Another point to make with command prompt or terminals, is if you do a particular command, it is "pre-programmed" to "expect" a particular format of that command.
For example, we know that adb push as a command expects after it . This means the command is actually
Code:
adb push
BUT if you put something AFTER , for example -
Code:
adb push somethingelse
, it will assume that the "somethingelse" is a bad parameter, and the command will fail. It will probably display (or "print" which is the technical term in a terminal) a helpful guide of how the command should be used instead of trying to run the command which it does not understand.
You're probably wondering why I am telling you this. Well quite simply, it is a warning about folder names. Imagine you have c:\users\rootSU\My Documents as a folder. You assume the command is then
Code:
adb pull /data/media/0 c:\users\rootSU\My Documents
but it is not... There is a space in between My and Documents. What you have actually done is
Code:
adb pull Documents
because it uses a space to signify the end of a command or parameter. It is best to avoid using folders with spaces in them. Avoid as much as you can. In the event it is unavoidable (Although when is it ever>) then please surround the path with quotation marks,
Code:
adb pull /data/media/0 "c:\users\rootSU\My Documents"
so that way, it sees everything between the " " as a single parameter.
Myth Busters
Myth 1: You need USB debugging on to use adb and fastboot
If you cannot boot into Android, it doesn't matter. You DO NOT need USB Debugging turned on to use adb outside of android. USB Debugging is an Android ONLY setting. Fastboot obviously also does not need debugging either as this too is outside of Android
Myth 2: to adb push or fastboot flash files, they must be in the same folder as adb or fastboot executables. Sorry but this is rubbish. You can pass the full path of the image you're flashing or file you're pushing in the command and fastboot / adb can be called system wide if you've set them as an environment variable or used the 15 second installer
thanks(im out of thanks). but ill be back to leave one here!!!!!
simms22 said:
thanks(im out of thanks). but ill be back to leave one here!!!!!
Click to expand...
Click to collapse
No worries. Just putting it here for info. It's not a new work, just a slightly amended version of my N5 thread. No need for thanks
rootSU said:
No worries. Just putting it here for info. It's not a new work, just a slightly amended version of my N5 thread. No need for thanks
Click to expand...
Click to collapse
it was up in the n5 threads before, and was needed here. but its here now as well, so thank you
Good guide. Needs to be a sticky. In fact, I think every device general forum should have a sticky like this. Would have saved me a lot of grief back when....
Excellent update.
Very good to see. I'm sure lots of people will be sending noobs here for the basics.
Up to your usual helpful, good work I see.
rootSU said:
This tool asks if you want to install adb and fastboot (to which you should answer Y) and then creates c:\adb\adb.exe and c:\adb\fastboot.exe
It then asks if you want to install it system wide (to which again, you should answer Y)... This then allows you to type adb commands in the command prompt without having to open a particular directory first. You may or may not understand what I mean when I say that, but take it from me, its much more convenient and easier to use this way.
Click to expand...
Click to collapse
Y option = System-wide = install to "C:\adb" and add path for system variable - This mean you can use it by any account on your pc.
N option = Current user only = install to "C:\Users\[YOUR USERNAME]\adb" and add path for user only - Only user account used for installation can actually use it.
So if you say Y or N you will be still able to use it from any directory with cmd.
rootSU said:
It will also ask if you want to install device drivers. Actually, say N to this as we're going to cover that next, using the google USB drivers
Here is a link to the Google USB Driver: DOWNLOAD THIS
Click to expand...
Click to collapse
Drivers in my installer are the one from the link you posted here. I'm not using any modified drivers, just the one that come with SDK. And they are also digitally signed.
I hope you will fix these But still nice work, beginners should understand it :good:
Snoop05 said:
Y option = System-wide = install to "C:\adb" and add path for system variable - This mean you can use it by any account on your pc.
N option = Current user only = install to "C:\Users\[YOUR USERNAME]\adb" and add path for user only - Only user account used for installation can actually use it.
So if you say Y or N you will be still able to use it from any directory with cmd.
Drivers in my installer are the one from the link you posted here. I'm not using any modified drivers, just the one that come with SDK. And they are also digitally signed.
I hope you will fix these But still nice work, beginners should understand it :good:
Click to expand...
Click to collapse
Thanks for the info. I thought system wide meant it was putting it as a path environment variable. Reason I didmt use the drivers from your tool originally is (well I wrote this thread for N5 originally) they didnt work so had to install the universal naked driver. But if yours are the same as the ones linked, I can update that.
rootSU said:
Thanks for the info. I thought system wide meant it was putting it as a path environment variable. Reason I didmt use the drivers from your tool originally is (well I wrote this thread for N5 originally) they didnt work so had to install the universal naked driver. But if yours are the same as the ones linked, I can update that.
Click to expand...
Click to collapse
Path is added in both cases.
Sooo I need a little help here. I followed the directions to unlock the bootloader and everything went good. I did the CF auto-root, and the phone booted back up as normal. Now, I was trying to flash the M preview, and all of a suddon now my phone isn't recognized in adb. You posted a pic of what we don't want to see when testing for adb, but you don't say how to fix it if we run into the problem. Any way to get it to recognize my phone again so I can get this build on?
papeshfoo said:
Sooo I need a little help here. I followed the directions to unlock the bootloader and everything went good. I did the CF auto-root, and the phone booted back up as normal. Now, I was trying to flash the M preview, and all of a suddon now my phone isn't recognized in adb. You posted a pic of what we don't want to see when testing for adb, but you don't say how to fix it if we run into the problem. Any way to get it to recognize my phone again so I can get this build on?
Click to expand...
Click to collapse
Can you be very specific with your issue please?
papeshfoo said:
Sooo I need a little help here. I followed the directions to unlock the bootloader and everything went good. I did the CF auto-root, and the phone booted back up as normal. Now, I was trying to flash the M preview, and all of a suddon now my phone isn't recognized in adb. You posted a pic of what we don't want to see when testing for adb, but you don't say how to fix it if we run into the problem. Any way to get it to recognize my phone again so I can get this build on?
Click to expand...
Click to collapse
Android M no like root, you'll either have to live with stock or wait for chainfire to do his thing.
This all worked well until I had to find my device in the cmd prompt. It listed no devices when I typed in "ADB Devices". The issue I found was with the ADB Interface Driver. I uninstalled it and reinstalled it thinking it might've been a driver issue, but it still wouldn't work. I tried the "Uninstall driver" then "scan for hardware changes" but that didn't work. Finally I found the universal ADB driver and tried using that. STILL nothing. I figured that, because I don't have my device's driver installed, it might've been that, so I tried to DL it and yet again, nothing. I have a Kyocera Hydro Life, if that helps. Also, I tried looking through the "update driver manually" in order to update the driver software by looking through the different ADB interfaces that it had but my Kyocera driver wasn't there. Is it supposed to be there or do I just use one of the ones provided?
I checked my programs and apps and it says that the Kyocera usb driver was installed. Did I do something wrong?
ScottyChaos said:
This all worked well until I had to find my device in the cmd prompt. It listed no devices when I typed in "ADB Devices". The issue I found was with the ADB Interface Driver. I uninstalled it and reinstalled it thinking it might've been a driver issue, but it still wouldn't work. I tried the "Uninstall driver" then "scan for hardware changes" but that didn't work. Finally I found the universal ADB driver and tried using that. STILL nothing. I figured that, because I don't have my device's driver installed, it might've been that, so I tried to DL it and yet again, nothing. I have a Kyocera Hydro Life, if that helps. Also, I tried looking through the "update driver manually" in order to update the driver software by looking through the different ADB interfaces that it had but my Kyocera driver wasn't there. Is it supposed to be there or do I just use one of the ones provided?
I checked my programs and apps and it says that the Kyocera usb driver was installed. Did I do something wrong?
Click to expand...
Click to collapse
Try a different USB port. If that doesn't work try a different USB cable. If that also doesn't work, you could try disabling driver signature checking for Windows.
If those don't work, try this thread > http://forum.xda-developers.com/showthread.php?t=1583801
cam30era said:
Try a different USB port. If that doesn't work try a different USB cable. If that also doesn't work, you could try disabling driver signature checking for Windows.
If those don't work, try this thread > http://forum.xda-developers.com/showthread.php?t=1583801
Click to expand...
Click to collapse
EDIT: I also forgot to mention that the error code that came up while I was in the dev manager was compatibility error code (28) when I clicked on "Device ADB interface".
ScottyChaos said:
EDIT: I also forgot to mention that the error code that came up while I was in the dev manager was compatibility error code (28) when I clicked on "Device ADB interface".
Click to expand...
Click to collapse
Error 28 means drivers not installed. Try the driver help thread that I linked above.
---------- Post added at 12:33 PM ---------- Previous post was at 12:04 PM ----------
cam30era said:
Error 28 means drivers not installed. Try the driver help thread that I linked above.
Click to expand...
Click to collapse
@ScottyChaos,
Just a fundamental question: I assume you have enabled "Developer Options" in Settings, and then checked "enable USB debugging"?
---------- Post added at 12:39 PM ---------- Previous post was at 12:33 PM ----------
[/COLOR @ScottyChaos,
Here is a thread that you might find interesting > http://forum.xda-developers.com/android/help/metro-pcs-kyocera-hydro-life-rooted-t2870678
Windows 10 device driver management is even more locked down then windows 8. I got two of the three drivers loaded but when going into adb mode on the phone through recovery it just disappeared out of the device manager. I had to unplug and plug in while in that mode to trigger a unloaded driver in the device manager. Once there I had to force the adb driver manually with the nasty windows driver warning and all. Once I did that I could see the device in adb mode and sideload my marshmallow OTA. woot!
I decided to drop a thanks bomb...
ADB is good.
But that fastboot.
Seriously, its ONE command. OK, a few different arguments to use.... But it is so easy, and so powerful. People are afraid to mess up on command line, but its actually way harder to type the wrong thing out then to click the wrong thing.
LEARN IT. Forget your toolkit.
You can fix almost anything, Its not too hard for you. It may be new... YOU CAN DO IT.
Also, I have to say it... Its not going to help anyone, but it will keep me from punching something. ADB and Fastboot... Not the same. You don't ADB a new system image....
So I've come across a quirk that I haven't been able to resolve and haven't noticed before getting my G5. When I run
Code:
adb devices
on my computer with my phone connected, it shows my device but says unauthorized. I cannot seem to authorize my device. I have tried:
Revoke USB Debugging Authorizations (option not available in Developer Options)
Delete adb_keys in /data/misc/adb/ (No adb_keys file in the folder)
Create adb_keys file on my computer using the computers public key (Phone deletes this file on boot)
I realize this is more of a general Android question, but as it hasn't happened to me on any other phone, I wanted to see if anyone else was having this trouble.
Same boat here, haven't been able to fix the issue. I believe there's a testboot3.img floating around that fixes it. I downloaded it awhile ago as I keep a eye on everything for this device. But I don't know if it does and if you flash a new boot.img I'd think it would override it. I've tried your method as well.
I am also having this issue. Does anyone have a solution?
To update this for those that need it; this toolkit worked to fix this issue for me in Linux. I just hit the red block in the upper left that says "unauthorized device" when the phone was plugged in. Not sure what the kit did but then my phone finally asked if I wanted to allow the computer access. After doing that I finally got "authorized" when running "adb devices" in ubuntu.
https://forum.xda-developers.com/g5-plus/development/toolkit-moto-g5-plus-toolkit-root-t3605203
A fix if you are running Windows (or Linux)
I just found a fix that worked for me.
(Although i got the "unauthorized" status with the phone running as usual, I didn't get the same problem when in recovery mode.)
I followed instructions from this site but needed to change Linux commands to simliar Windows commands: http://www.neuraldump.com/2017/05/how-to-fix-adb-unauthorized-error/
If you are using Windows, you'll need to follow the commands below:
- First things first:
- Phone: Check if you have a file called adb_keys located at: /data/misc/adb/adb_keys. If you have it, i would recommend you to backup the file. (I didn't have it.)
- Windows:You'll need to have a file called adbkey.pub located at C:\users\UserAccount\.android\
- Boot into recovery mode.
- Plug your phone into PC.
- Open cmd and run adb devices. It would show "recovery" instead "unauthorized".
- Create a new file called adb_keys file on your PC:
Code:
type NUL > adb_keys
- Now you need to copy the contents from the adbkey.pub to adb_keys, the new file you just created:
adbkey.pub is located at C:\users\UserAccount\.android\
(Needless to say you need to replace "UserAccount" when running the command)
Code:
type c:\users\UserAccount\.android\adbkey.pub > adb_keys
- Upload the adb_keys file to your phone:
Code:
adb push adb_keys /data/misc/adb/adb_keys
- Reboot and run adb devices. It should be working now.
(Thanks to Tony, the guy who posted this fix in his blog).
need help please. Cant do it. I have that problem on my moto g5 plus. Dont understand this. Windows 10 pro computer.
Edit: I solved using the adb_keys from my xperia and using root explorer on my moto g5 plus and paste on data/misc/adb/adb_keys
Awesome! You may need to change permissions like I did from using root user within a debian chroot. Just like ssh keys....
From twrp recovery console.
chmod 0644 /data/misc/adb/adb_keys
chown -u shell /data/misc/adb/adb_keys
That got me authorized and running a root shell to spoof fingerprint before getting past first Hello page of setup
Yep, it works on my side as well on a Samsung galaxy Note 3, RROS 8.6.1, very good tip!:good:
@mnoguti
thank you, this fix my Verizon Note 4 issue with Smali Patcher not detecting my phone.
Thank you! My Galaxy S4 GT-i9505 also had this issue and your guide let me succesfully use adb normally again!
mnoguti said:
A fix if you are running Windows (or Linux)
I just found a fix that worked for me.
(Although i got the "unauthorized" status with the phone running as usual, I didn't get the same problem when in recovery mode.)
I followed instructions from this site but needed to change Linux commands to simliar Windows commands: http://www.neuraldump.com/2017/05/how-to-fix-adb-unauthorized-error/
If you are using Windows, you'll need to follow the commands below:
- First things first:
- Phone: Check if you have a file called adb_keys located at: /data/misc/adb/adb_keys. If you have it, i would recommend you to backup the file. (I didn't have it.)
- Windows:You'll need to have a file called adbkey.pub located at C:\users\UserAccount\.android\
- Boot into recovery mode.
- Plug your phone into PC.
- Open cmd and run adb devices. It would show "recovery" instead "unauthorized".
- Create a new file called adb_keys file on your PC:
Code:
type NUL > adb_keys
- Now you need to copy the contents from the adbkey.pub to adb_keys, the new file you just created:
adbkey.pub is located at C:\users\UserAccount\.android\
(Needless to say you need to replace "UserAccount" when running the command)
Code:
type c:\users\UserAccount\.android\adbkey.pub > adb_keys
- Upload the adb_keys file to your phone:
Code:
adb push adb_keys /data/misc/adb/adb_keys
- Reboot and run adb devices. It should be working now.
(Thanks to Tony, the guy who posted this fix in his blog).
Click to expand...
Click to collapse
Thank you so much, you saved my life
Hi Guys,
Is there a way to uninstall system app or maybe android auto without ROOT?
Yes.
You need adb and do
Code:
adb shell
pm uninstall com.myApp
See
Code:
pm help
for more infos after you entered your shell.
What you should know: This only removes the app from the given user. If you create a new user, this new user still has this app. If you factory reset your device, the app returns back for every user. (This only applies to system apps. User apps will be deleted normally using this command)
User699 said:
Yes.
You need adb and do
Code:
adb shell
pm uninstall com.myApp
See
Code:
pm help
for more infos after you entered your shell.
What you should know: This only removes the app from the given user. If you create a new user, this new user still has this app. If you factory reset your device, the app returns back for every user. (This only applies to system apps. User apps will be deleted normally using this command)
Click to expand...
Click to collapse
[OFFICIAL][TOOL][WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
15 seconds ADB Installer v1.4.3 ADB, Fastboot and Drivers What is this? This is All-in-One installer for 3 most needed PC tools for Android. No need to download big SDK for 3 small things. I originaly made it for my Kurdish friend AnGrY DuDe in...
forum.xda-developers.com
IT SAY DEVICE OFFLINE
k44mos said:
[OFFICIAL][TOOL][WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
15 seconds ADB Installer v1.4.3 ADB, Fastboot and Drivers What is this? This is All-in-One installer for 3 most needed PC tools for Android. No need to download big SDK for 3 small things. I originaly made it for my Kurdish friend AnGrY DuDe in...
forum.xda-developers.com
IT SAY DEVICE OFFLINE
Click to expand...
Click to collapse
That's interessting.
What I found on the net are two things:
1) Do
Code:
adb kill-server
adb devices
.
Your device should give you a popup message. Accept that and also hit the "always allow fom this computer" check box.
2) Use another adb toolkit. I don't use windows, but when I did, I used googles offical adb toolkit. I never have had any problems with that one.