Database Users

Why do I get this icon when trying to root my N4 ?

So I followed the instructions in this link so I could root my N4:
http://www.androidrootz.com/2012/11/how-to-root-nexus-4-on-mac.html
I get this when I reach the point in the video where he instructs me to enter recovery mode.. why ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You aren't flashing your recovery properly in bootloader mode.
fastboot flash recovery <nameofrecovery>.img
Choose either: Clockwork Recovery of Team Win Recovery Project (TWRP) as your recovery. Put the .img file in the same folder as fastboot.exe.
I recommend TWRP.
So for example,
http://teamw.in/project/twrp2/129 Scroll down to recovery image method
Place the .img file in the same as fastboot
go into bootloader mode on your phone
fastboot flash recovery openrecovery-twrp-2.3.3.2-mako.img
it should say sending.... then done!
then use vol keys and you should be able to get into bootloader and the android with red ! isnt there.
And thank you for not using the toolkit <3

zephiK said:
You aren't flashing your recovery properly in bootloader mode.
fastboot flash recovery <nameofrecovery>.img
Choose either: Clockwork Recovery of Team Win Recovery Project (TWRP) as your recovery. Put the .img file in the same folder as fastboot.exe.
I recommend TWRP.
So for example,
http://teamw.in/project/twrp2/129 Scroll down to recovery image method
Place the .img file in the same as fastboot
go into bootloader mode on your phone
fastboot flash recovery openrecovery-twrp-2.3.3.2-mako.img
it should say sending.... then done!
then use vol keys and you should be able to get into bootloader and the android with red ! isnt there.
And thank you for not using the toolkit <3
Click to expand...
Click to collapse
This did not work

You have the latest version of Android Fastboot Binary? Bootloader unlocked?
.img file in the fastboot-mac folder
The error is pipe properties. Whatever that is.

BLL00 said:
This did not work
Click to expand...
Click to collapse
Check my post (#13) in this thread. http://forum.xda-developers.com/showthread.php?t=1997684
If you received an ota you have to delete a couple files to get the recovery to stick.
Edit: the pic I quoted didn't show up in the app. I'm not sure what that error means.
Sent from my Nexus 7 using Tapatalk HD

my problem is that after i flash recovery-clockwork-6.0.1.9-mako.img, it refuses to enter cmw and shows the icon I showed in my picture.

BLL00 said:
my problem is that after i flash recovery-clockwork-6.0.1.9-mako.img, it refuses to enter cmw and shows the icon I showed in my picture.
Click to expand...
Click to collapse
When you type fastboot-mac devices... your device shows up right?

zephiK said:
When you type fastboot-mac devices... your device shows up right?
Click to expand...
Click to collapse

BLL00 said:
Click to expand...
Click to collapse
Hmm okay well I don't know how a mac works. I know that you don't need drivers. I'm going to say that it's something wrong with the fastboot binary file. It's the error that you're seeing there. On the guide you used, the error is nonexistant in his picture. Bootloader is unlocked right?
You have the latest version of Android Fastboot Binary? Bootloader unlocked?
.img file in the fastboot-mac folder
The error is pipe properties. Whatever that is.
Click to expand...
Click to collapse
ensure USB debugging is enabled as well.

zephiK said:
Hmm okay well I don't know how a mac works. I know that you don't need drivers. I'm going to say that it's something wrong with the fastboot binary file. It's the error that you're seeing there. On the guide you used, the error is nonexistant in his picture. Bootloader is unlocked right?
Click to expand...
Click to collapse
-Yeah I unlocked my bootloader.
-The pipe properties error is gone, it was just a matter of switching usb ports!
I need to mention that when I flashed the cmw img and hit start on the fastboot menu, IT DID in fact enter cmw, but somewhere in there, I think I've done something wrong and my phone restarted normally. Now, I upload the zip file into the sdcard path and restart my phone into fastboot again, when I hit recovery mode, it then shows that icon!

BLL00 said:
-Yeah I unlocked my bootloader.
-The pipe properties error is gone, it was just a matter of switching usb ports!
I need to mention that when I flashed the cmw img and hit start on the fastboot menu, IT DID in fact enter cmw, but somewhere in there, I think I've done something wrong and my phone restarted normally. Now, I upload the zip file into the sdcard path and restart my phone into fastboot again, when I hit recovery mode, it then shows that icon!
Click to expand...
Click to collapse
Did you read my post?
From efrants android 101 sticky:
I just flashed CWM, but every time I try to boot into CWM, I keep seeing the stock recovery. Why?
If you updated your Android build using an OTA update file (either manually or over-the-air), the update placed two files on your device that re-flash the stock recovery every time you reboot your device. These two files are:
/system/etc/install-recovery.sh <== this is the script that installs the patch file
/system/recovery-from-boot.p <== this is the patch
You have to rename (or delete) one or both of them, then re-flash your custom recovery. Now it will stick.
Click to expand...
Click to collapse

El Daddy said:
Did you read my post?
Click to expand...
Click to collapse
yes i did and if you noticed in the photo i uploaded, there's an iphone under my nexus 4 so I'm VERY new to this. I couldn't find the system path ???

BLL00 said:
yes i did and if you noticed in the photo i uploaded, there's an iphone under my nexus 4 so I'm VERY new to this. I couldn't find the system path ???
Click to expand...
Click to collapse
You have to use a app that has root functionality. Go outside of the /sdcard/ folder and go into /system/
So basically here's what you want to do. By the way good job at switching USB port and having that work.
- Flash CWR
- Flash the superuser zip file to obtain root
- download a file manager that lets you go outside /sdcard/ and then go to the path el daddy mentioned and delete those files.
https://play.google.com/store/apps/...yLDEsImNvbS5qcnVtbXkucm9vdC5icm93c2VyZnJlZSJd here is a file manager you can use.
basically press "..." and go into /system/etc/ find file install-recovery.sh
and/or /system/ and find file recovery-from-boot.p
You have to rename (or delete) one or both of them, then re-flash your custom recovery. Now it will stick.
@El Daddy: He's just a little new. Don't be so harsh (you probably weren't and thought he didn't see it), I mean after all he didn't use the toolkit so, I have respect for him.

the first path is /system/etc/ delete install-recovery.sh
the path to the other file is /system/ find recovery-from-boot.p and delete that
You'll need root access first.
So basically, flash the custom recovery then boot into recovery.
Flash the su.zip file.
Boot into the OS and use a file explorer and delete those files.
Then the custom recovery will stick.
---------- Post added at 06:52 PM ---------- Previous post was at 06:50 PM ----------
zephiK said:
@El Daddy: He's just a little new. Don't be so harsh (you probably weren't and thought he didn't see it), I mean after all he didn't use the toolkit so, I have respect for him.
Click to expand...
Click to collapse
I didn't mean to come off harsh. Sometimes demeanor doesn't translate well through text.

El Daddy said:
the first path is /system/etc/ delete install-recovery.sh
the path to the other file is /system/ find recovery-from-boot.p and delete that
You'll need root access first.
So basically, flash the custom recovery then boot into recovery.
Flash the su.zip file.
Boot into the OS and use a file explorer and delete those files.
Then the custom recovery will stick.
---------- Post added at 06:52 PM ---------- Previous post was at 06:50 PM ----------
I didn't mean to come off harsh. Sometimes demeanor doesn't translate well through text.
Click to expand...
Click to collapse
Yeah agreed. Same goes with sarcasm in text. Just takes some patience with the new people, but I honestly don't mind as this is the Q&A section after all. As long as they're not using the toolkit I won't be upset hehe

zephiK said:
Yeah agreed. Same goes with sarcasm in text. Just takes some patience with the new people, but I honestly don't mind as this is the Q&A section after all. As long as they're not using the toolkit I won't be upset hehe
Click to expand...
Click to collapse
Yep. I'm willing to help anyone, (for as long as it takes) who wants to put the time in and learn. Anyone not using a toolkit is a win for me. :laugh:

El Daddy said:
Yep. I'm willing to help anyone, (for as long as it takes) who wants to put the time in and learn. Anyone not using a toolkit is a win for me. :laugh:
Click to expand...
Click to collapse
Amen, amen. Free training for these people to help others the non-toolkit way so people like us can take a break and relax

Thanks everybody for helping out. I managed to root my phone and this is what I have done to bypass that android logo with it chest open and a "!" floating on top of it:
1-Restarted phone into fastboot mode
2-Flashed CWR's .img
3-Went straight into recovery mode after flashing and was able to enter CMW and complete the procedure.

Next thing you wanna do is GET RID OF THAT TASK MANAGER! Let android work its magic... Enjoy !
Sent from my Nexus 4 using Tapatalk 2

Just to mention when you fastboot flash or use goo manager for twrp recovery it will automatically add .bak to the recovery- from-boot.p file
Sent from my Nexus 4

GUIDE - Install TWRP Recovery and Root MOTO E Phone

WARNING!
Your warranty is void if you follow the given instruction in this guide. Read all the instruction very carefully and Perform everything at your own risk.
This guide is only for the MOTO E android smartphone. Don’t try this method on any of other Android devices, It may hard brick your device. So, first confirm your phone model number in your android phone settings. To do this Go the Settings page of your device and check out the “About Device” option.
PRE-REQUISITES AND REQUIREMENTS
1. BACKUP YOUR ANDROID DATA
2. INSTALL MOTO E DRIVERS
3. ENABLE USB DEBUGGING MODE
4. CHARGE YOU ANDROID
If your device switched off during this process, it could damage or brick the device. Make sure that your Android battery is full charge or near about 50-70% battery level.
HOW TO INSTALL TWRP & ROOT MOTO E
Step 1. Download the Fastboot files for MOTE E and extract the folder on your desktop.
Step 2. Download The TWRP recovery from here (Rename the file to recovery.img) and extract in the same folder as of step 1.
Step 3. Download The SuperSU from here and copy it into the root of your internal memory,
Step 4. Now all the important files are with your. First you have to unlock the bootloader of your device. Read here.
Step 5. Connect your phone to PC and Reboot to bootloader by pressing VolumeDown + Power button for about 6-7 seconds.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 6. Go to the Fastboot folder in step 1, Do Shift + RightClick in empty space in the folder without selecting anything, Select Open a command window here.
Step 7. Now you will see the command prompt window on your screen. In the command prompt window, you need to enter the below mentioned command;
fastboot flash recovery recovery.img
Step 8. Press Volume Down to select recovery on fastboot menu, then press Volume Up to confirm your choice to boot into recovery
Step 9. Now touch doesn’t work in recovery straight away, so wait 60 seconds without touching the phone, The phone screen will go blank.
Step 10. Press power button and do swipe to unlock to get your touch working again! Select Install, scroll down and find the SuperSU Zip downloaded in step 3.
Step 11. Swipe to confirm, wait untill the flash is complete and then select reboot. First reboot will take some time, so no need to worry.
Now check your MOTO E app drawer, There should be SuperSU installed. Congratulations you are rooted!
via @howtorootmobile

I think so this guide is already available!!

TheStrix said:
I think so this guide is already available!!
Click to expand...
Click to collapse
Yeah I did that guide earlier!

recovery flash error
hey dude, i was trying to flash twrp n root but i have got an error. i have posted a ss, pls do help. thanks

5644red said:
hey dude, i was trying to flash twrp n root but i have got an error. i have posted a ss, pls do help. thanks
Click to expand...
Click to collapse
Write
Code:
mfastboot flash recovery recovery.img
it will work!

deej_roamer said:
Write
Code:
mfastboot flash recovery recovery.img
it will work!
Click to expand...
Click to collapse
Thanks for the help buddy but still it isnt working.

5644red said:
Thanks for the help buddy but still it isnt working.
Click to expand...
Click to collapse
Download another version of mfastboot, or simply just fastboot, or try from scratch again!
I saw earlier your mfastboot folder has recovery.img, so cannot be a misplace error!
Still check again it is there! Otherwise, do what i wrote in first line!

deej_roamer said:
Download another version of mfastboot, or simply just fastboot, or try from scratch again!
I saw earlier your mfastboot folder has recovery.img, so cannot be a misplace error!
Still check again it is there! Otherwise, do what i wrote in first line!
Click to expand...
Click to collapse
tried like 5 or 6 times buddy.. still no use.. i was able to unlock bootlocker without any trouble so i hope there is no trouble with moto drivers, i feel it might be due to fastboot file.. ill try again soon.. thanks

Can you please tell me if i will be able to install the 4.4.3 update after flashing custom recovery. Thanks in advance

Ccceenu said:
Can you please tell me if i will be able to install the 4.4.3 update after flashing custom recovery. Thanks in advance
Click to expand...
Click to collapse
No you need stock recovery!
But its alright you can revert back to custom recovery from here
So go back and enjoy custom recovery,
And if you still prefer not to change your recovery, you can try this guide!

deej_roamer said:
No you need stock recovery!
But its alright you can revert back to custom recovery from here
So go back and enjoy custom recovery,
And if you still prefer not to change your recovery, you can try this guide!
Click to expand...
Click to collapse
Thanks for your reply..I read that somewhere that during updates it checks for stock recovery..so i refrained from flashing custom recovery ... there is another question if you can answer...will the procedure of rooting will change in the 4.4.3 version. Thanks in advance

Ccceenu said:
Thanks for your reply..I read that somewhere that during updates it checks for stock recovery..so i refrained from flashing custom recovery ... there is another question if you can answer...will the procedure of rooting will change in the 4.4.3 version. Thanks in advance
Click to expand...
Click to collapse
No it wouldn't

moto e
i unlocked my bootloader can i directly install supersu from recovery without flashing custom recovery?

I guess....
5644red said:
hey dude, i was trying to flash twrp n root but i have got an error. i have posted a ss, pls do help. thanks
Click to expand...
Click to collapse
Did you make sure that you actually 'Opened' the 'fastboot' folder and then press shift and right click....?

having same problem
5644red said:
Thanks for the help buddy but still it isnt working.
Click to expand...
Click to collapse
Hey did u problem got sorted as I am having the same problem as u, kindly help me if anyone can

I tried to install twrp recovery but in cmd its shows an error
Error while loading recovery.img

Can I change my recovery from cwm to twrp
Sent from my Moto E using XDA Free mobile app

I am getting "partition size mismatch" error when i try to flash the TWRP recovery.

[Q] Cant enter factory reset mode (devide turned off)

Got an LG G2 D802 which recently was stuck in fastboot only,no download mode not anything at all,
after many tries and errors i managed to boot to download mode and flash an apropriate version.
The thing is from that moment i cant seem to get in factory reset screen through Power Down + Power button as it used on the beginning i press the is im supposed and the phone just normaly boots,never get on factory reset or recovery,I can only enter the recovery via application from playstore called Reboot Recovery.
I can still factory reset from settings but i want to know why i cant enter with the other way and i think it a necessary function to have just in case.
How can i fix this in order to get in factory reset when the device is turned off?
How can i install twrp without autorec because this was the problem which bricked my phone?(download zip and install from current recovery?)which twrp do i need for the following device?
Any info on dorimanx kernel?
Android version 4.4.2
Build Number KOT49I.D80220h
kernel version 3.4.0
Model LG G2 D802

Did you use a kdz file or tot file?

scuzzo500 said:
Did you use a kdz file or tot file?
Click to expand...
Click to collapse
kdz file was it,should i reflash with a .tot file?
also my device was locked to tmobile uk and the got unlock via pin from the carrier,if i reflash it will need again to be unlocked?

watanabe32 said:
How can i fix this in order to get in factory reset when the device is turned off?
Click to expand...
Click to collapse
You're running 4.4.2 which is KitKat. KitKat Recovery is accessed by holding PWR + VOL DWN, then when the LG logo appears, switching to VOL DWN + VOL UP. You are trying the old method for Jellybean Recovery.
watanabe32 said:
How can I install TWRP without AutoRec?
Click to expand...
Click to collapse
BEFORE FOLLOWING THIS MAKE SURE YOU HAVE WORKING ADB DRIVERS INSTALLED AND CAN CONFIRM COMMUNICATION WITH YOUR PHONE VIA ADB COMMANDS!
You can install TWRP without autorec, which will result in keeping your KitKat bootloader. This method is also called BUMP. Follow my steps:
1. Download your KDZ from here. If you are already running Stock KitKat, no need.. just continue to step 2. I like to do everything from a clean/fresh installation that's all.
2. Root your stock KK with StumpROOT.
3. Download Bumped TWRP from here.
Extract the recovery.img file from the downloaded TWRP .rar archive.
4. Next we need your boot.img file currently on your phone. We can extract your boot.img to your sdcard by running the following command:
Code:
dd if=/dev/block/platform/msm_sdcc.1/by-name/boot of=/sdcard/boot.img
Once your boot.img is on your sdcard, move it to your computer via usb or adb, your choice.
5. Download Windows BUMP Tool.
6. Bump your boot.img file with the Windows BUMP Tool. This will result in a newly created bumped.img file. Delete your original boot.img and rename bumped.img to boot.img
7. Next we need to force your phone into fastboot mode (as much as that might scare you!), we can do that by running the following command via adb/shell.
Code:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/boot
8. BEFORE WE GO ANY FURTHER, You should have 2 files on your computer: recovery.img, and your newly renamed boot.img (bumped with the Windows BUMP Tool). Next we need to reboot the phone in order to get into fastboot mode. So, REBOOT.
9. When your device reboots it will boot into fastboot as we nullified the boot partition. We now need to connect our device via adb and run the following commands,
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
These commands require your recovery.img and boot.img to be in the same folder as your fastboot.exe file.
(See the image below for an example)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Once successfully flashing your bumped recovery and bumped boot.img, run the following command:
Code:
fastboot reboot
.
That's it! You now installed TWRP without AutoRec, and kept your KitKat bootloader.
watanabe32 said:
Which TWRP do I need?
Click to expand...
Click to collapse
ALWAYS A BUMPED TWRP RECOVERY FROM HERE.
watanabe32 said:
Any info on dorimanx kernel?
Click to expand...
Click to collapse
Dorimanx Kernel works great with a KK Bootloader, BUT YOU NEED TO HAVE A BUMPED VERSION OF THE DORIMANX KERNEL. All versions of Dorimanx above 9.1 are BUMPED.

I'll try your steps when i go home,
i've got installed the minimal adb driver which i found in my search for fixi g the fastboot problem of g2 i think this will be enough right?
for the twrp recovery cant i install it via sideload?from the recovery that it has now which is not twrp/cwm,its something else i dont know what but it has wipe cache install from cache install fro sideload

watanabe32 said:
I'll try your steps when i go home,
i've got installed the minimal adb driver which i found in my search for fixi g the fastboot problem of g2 i think this will be enough right?
Click to expand...
Click to collapse
That should be okay. As long as you can use the fastboot command and fastboot.exe is present.
watanabe32 said:
for the twrp recovery cant i install it via sideload?from the recovery that it has now which is not twrp/cwm,its something else i dont know what but it has wipe cache install from cache install fro sideload
Click to expand...
Click to collapse
I have no idea, I've never used sideload before. I'm just giving you my solution to installing TWRP without AutoRec from the facts stated in your original post. We both have the D802 model and my methods above have worked flawlessly for me multiple times after reflashing a compatible KDZ. Good luck and take it slow.

[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo]

[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo]
Reboot to EDL mode from FASTBOOT!
No more Test Point Method needed ​
Technical Details:
Redmi Note 3 support rebooting to EDL in Android Bootloader aboot module (the "reboot-edl" command) but fastboot utility doesn't recognize "reboot-edl" in the command line and refuses to sent the command to the device. Since FastBoot command protocol is simple and text-based, it is enough to send a packet containing "reboot-edl" text over USB. The simplest way to do that is to patch Windows fastboot.exe file, replacing "reboot-bootloader" text with "reboot-edl". As "reboot-bootloader" string is found in the command line, fastboot.exe sends the same constant string to the device. So if "reboot-bootloader" is replaced with "reboot-edl", you can specify "reboot-edl" in the command line and the same text will be sent to the device.
New Update: Fastboot updated to latest version.
Tutorial:
1. Download the Fastboot_edl-v2.zip from Here.
2. Extract the zip in your desktop
3. Open the folder and double Click on Reboot.bat
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Reboot your device to Fastboot Mode by pressing
Vol Down + Power button and connect your device with PC and Press Enter.
5. Your Device will be rebooted to EDL!
6. Now flash your Fastboot Rom with Mi Flash Tool to Unbrick your Mi Note 3. ​
Proof:
Thanks to @emuzychenko for the Idea!

This is AWESOME!! Just tested and worked amazingly.
Thank you!
Edit: the included command prompt didn't work for me though, launched standard and traversed to this folder

It would've been better if the source of this guide is also mentioned, just my thoughts
Sent from my Redmi Note 3 using XDA-Developers mobile app

Harish_Kumar said:
It would've been better if the source of this guide is also mentioned
Click to expand...
Click to collapse
Especially since most of text had been copied "as is".

Please add this to op
=> https://youtu.be/-6uErg52nKs

kaushal64 said:
Please add this to op
=> https://youtu.be/-6uErg52nKs
Click to expand...
Click to collapse
I have updated the fastboot.exe and the method also. Update your video with this and I will add it to OP.

I had replaced link for modified fastboot file please add it to op.

Harish_Kumar said:
It would've been better if the source of this guide is also mentioned, just my thoughts
Click to expand...
Click to collapse
emuzychenko said:
Especially since most of text had been copied "as is".
Click to expand...
Click to collapse
Thumbs up!

This is great
My problem solved
Many thanks

not working for me...redmi note 3 pro sd, rom 7.2.7.0.0. it says something like "your phone enter edl mode successfully", but it simply restarts and enter Android OS...

Zarko007 said:
not working for me...redmi note 3 pro sd, rom 7.2.7.0.0. it says something like "your phone enter edl mode successfully", but it simply restarts and enter Android OS...
Click to expand...
Click to collapse
Send me your current emmc_appsboot.mbn and I will check what is happening wrong there.

BRoy_98 said:
Send me your current emmc_appsboot.mbn and I will check what is happening wrong there.
Click to expand...
Click to collapse
Where to find it?

Zarko007 said:
Where to find it?
Click to expand...
Click to collapse
You can find it in the fastboot rom. Or if you have recovery rom, then go to the firmware-update folder in the zip there you will find it.

BRoy_98 said:
You can find it in the fastboot rom. Or if you have recovery rom, then go to the firmware-update folder in the zip there you will find it.
Click to expand...
Click to collapse
Maybe stupid question, but wouldn't phone go to edl mode (with red led flashing) before flashing rom and what then mbn file has to do? According to your manual it is the last step?
thanks

Zarko007 said:
not working for me...redmi note 3 pro sd, rom 7.2.7.0.0. it says something like "your phone enter edl mode successfully", but it simply restarts and enter Android OS...
Click to expand...
Click to collapse
Is your device bricked or you want to flash an official miui rom? Since your rom looks like a distributor rom not an official rom.
Sent from my kenzo using Tapatalk

sator02 said:
Is your device bricked or you want to flash an official miui rom? Since your rom looks like a distributor rom not an official rom.
Sent from my kenzo using Tapatalk
Click to expand...
Click to collapse
No, my device is not bricked, it has locked bootloader. I received code from xiaomi to unlocked bootloader but it constantly stops at 50%, and I found out that it can't be unlocked without china dev rom, but no rom can be installed with locked bootloader I only want to flash an official miui rom to be able to receive updates...Xiaomi really made this too complicated....

Zarko007 said:
No, my device is not bricked, it has locked bootloader. I received code from xiaomi to unlocked bootloader but it constantly stops at 50%, and I found out that it can't be unlocked without china dev rom, but no rom can be installed with locked bootloader I only want to flash an official miui rom to be able to receive updates...Xiaomi really made this too complicated....
Click to expand...
Click to collapse
Don't use this tool if your device is not bricked, your rom is a distributor rom that's why you cannot unlock your device, you have to flash miui rom prior to unlocking, you can do it thru edl mode using adb, search on miui forums and you'll find it.
Edit: check this out: http://en.miui.com/thread-235865-1-1.html
Sent from my kenzo using Tapatalk

Zarko007 said:
No, my device is not bricked, it has locked bootloader. I received code from xiaomi to unlocked bootloader but it constantly stops at 50%, and I found out that it can't be unlocked without china dev rom, but no rom can be installed with locked bootloader I only want to flash an official miui rom to be able to receive updates...Xiaomi really made this too complicated....
Click to expand...
Click to collapse
If your device is not bricked, then you can reboot to EDL mode from adb. Do this to reboot to edl from adb:
1. Connect your device to PC.
2. Open adb and type: adb devices and press enter to see your device if it is connected properly.
3. When you can see your device ID, type: adb reboot edl and press enter. It will reboot your device to EDL mode.
4. Now flash your rom with Mi Flash.

BRoy_98 said:
If your device is not bricked, then you can reboot to EDL mode from adb. Do this to reboot to edl from adb:
1. Connect your device to PC.
2. Open adb and type: adb devices and press enter to see your device if it is connected properly.
3. When you can see your device ID, type: adb reboot edl and press enter. It will reboot your device to EDL mode.
4. Now flash your rom with Mi Flash.
Click to expand...
Click to collapse
I have tried it already many Times but no success...

Zarko007 said:
I have tried it already many Times but no success...
Click to expand...
Click to collapse
This must be driver problem. Install MI PC suite and it will install all necessary drivers. Then try it again.

[Tutorials] How To Root Lenovo K8 Note & Install TWRP(UnOfficial) + Stock Rom

Warning
Before Proceeding backup your data
TRY at OWN risk I'm NOT Responsibe if you BRICK YOUR DEVICE
Update- This method is tested & working with latest ota update NMB26.54-74
[/CENTER][/B][/SIZE][/COLOR]
IF ANYTHING GOES WRONG Download & Flash Stock ROM
Stock ROM link
SPFlashTool link
Updated Stock ROM 54-74 GDrive - here
New Oreo 27.43-20 Link
Old version Stock ROM Google Drive Link Stock Rom
nvram backup file by @peacelover94 - here
Solution For
>Tool img DL fail
Just check/tick these option in spflashtool settings & Flash stock rom again
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Video Guide For Stock Rom Flashing - Youtube
How to Flash Stock Rom via Fastboot Method -
1. Open CMD by Shift + Right Click in Folder where your stock firmware .img files are.
2. Reboot to Fastboot Mode by using cmd command
adb fastboot reboot​Or
Switch off then Press & Hold Vol Up + Power button for while once menu appeared Select fastboot by using Vol Up key & confirm by pressing Vol Down Key
3. In fastboot type following command in CMD Window
For checking devices is connected in fastboot enter
fastboot devices​If Connected then proceed following commands
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot flash system system.img​ flashing system takes 10+ mins
fastboot flash data userdata.img
fastboot reboot​
Download & Install ADB from here
First Unlock your bootloader
1. First of all, enable the Developer Option
To Enable the Developer Option, Go to your Settings -> About -> Software Information -> More -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled"
2. Go back to settings -> Now you need to enable the OEM Unlock by going to Settings -> Developer Option and Enable OEM Unlock and USB Debugging
3. Now connect your phone to Computer using USB Cable.
4. When you connect your Phone to Computer, please wait until all the drivers get installed.
5. Open a command prompt window by pressing Shift Key + Right Mouse Click.
6. Now type the command below to reboot your phone to bootloader
adb reboot bootloader​7. If you see a pop up to allow USB Debugging on your phone, Click OK.
8. proceed to unlock the bootloader with the following command:
Remember that this step will wipe EVERYTHING off the phone
fastboot oem unlock​Say Yes to unlock bootloader and then it will some time format your data
9. Reboot Your Device , You will see Orange Status bla bla bla Don't panic Its normal thing now setup your device but do not restore backup yet
Flashing TWRP and ROOT
Updated Black Screen Fix TWRP - Download
Old Download TWRP
Download latest Magisk zip from here
Or
SuperSu zip from here
Flahed & Tested SuperSU v2.82 works fine but SafetyNet Fails
Sock Recovery if needed Link
1. Connect your device to PC
2. Open CMD by Shift+Right click open cmd where your TWRP_3.1.1.0.img is downloaded.
3. Reboot to Bootloader by
adb reboot bootloader​4. Now enter following command in fastboot
fastboot flash recovery TWRP_3.1.1.0.img​5. DO NOT USE fastboot reboot
Use "vol up + down + power button" to manually switch off you k8 note, otherwise twrp will restore to stock if you use fastboot reboot command.
6. After Switch Off Press & hold vol up + power button then select recovery by vol up & press vol down key to enter in recovery.
7. Now Wait for 30 Sec/ till phone vibrates, Then press power button + vol up simultaneously until you see twrp lock screen.
8. Just Cancel if It asks for Enter password to decrypt and Allow modification by swipe.
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
10. GoTo install browse and select Magisk.zip or SuperSU.zip & flash.(optional if needed install Busybox for Android NDK by osm0sis magisk module for busybox)
11. Reboot Enjoy.
Known bug in TWRP-
Battery always shows 50% in TWRP
Video Guide https://youtu.be/HrbppEWlOhs
Join Lenovo K8 Note Development Group on Telegram for direct Conversation Link
WhatsApp Group Link
Enable Wireless Display/MiraCast Magisk Module - Video
Thanks to:
@andy_zhang - for stock rom post link
and me @ysalunke007 for TWRP
NEXT CUSTOM ROM

Big Thanks for the Tutorial. If anything happens wrong while rooting like boot loop or something worse, is there stock rom or firmware to flash or push through adb ?

Yes
peacelover94 said:
Big Thanks for the Tutorial. If anything happens wrong while rooting like boot loop or something worse, is there stock rom or firmware to flash or push through adb ?
Click to expand...
Click to collapse
yes, there is stock ROM
link also provided in this post end.
btw here's direct link Stock ROM
FlashTool link

ysalunke007 said:
yes, there is stock ROM
link also provided in this post end.
btw here's direct link Stock ROM
FlashTool link
Click to expand...
Click to collapse
Thank you very much. The flash tool link does not seems to work. Hope its SP flash tool you are talking about.

flash via adb fastboot methoad i have succesfully flash adb method
peacelover94 said:
Big Thanks for the Tutorial. If anything happens wrong while rooting like boot loop or something worse, is there stock rom or firmware to flash or push through adb ?
Click to expand...
Click to collapse

Nice Job
Finally rooting tutorial for Lenovo K8 Note has become available.

Does SuperSu work fine?

Anas Rahman said:
Does SuperSu work fine?
Click to expand...
Click to collapse
Not tested by me but some user says in original rom post that he flashed superSU from old twrp also works fine.

peacelover94 said:
Thank you very much. The flash tool link does not seems to work. Hope its SP flash tool you are talking about.
Click to expand...
Click to collapse
Yes it's SP flash tool but you can use adb fastboot also

ysalunke007 said:
Not tested by me but some user says in original rom post that he flashed superSU from old twrp also works fine.
Click to expand...
Click to collapse
I'll confirm it tomorrow

ysalunke007 said:
Yes it's SP flash tool but you can use adb fastboot also
Click to expand...
Click to collapse
Please tell me how to flash firmware.Im new to this device firmware flashing

lenrussel said:
Please tell me how to flash firmware.Im new to this device firmware flashing
Click to expand...
Click to collapse
It's easy bro check this guide
https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Fastboot Guide
http://www.stupdroid.com/2016/08/flash-stock-rom-via-fastboot-on-android.html?m=1

Does the rom link given here unzips perfectly?
Because i saw in another thread of Lenovo K8note titled firmware, users unable to unzip due to error in system img. Also downloading from baidu needs a user id. If its possible could you or anyone else reading this upload it in some other online storage drive. Im little bit worried about getting a worse situation while rooting. Even if it goes wrong i can use the stock firmware to make it back.

peacelover94 said:
Does the rom link given here unzips perfectly?
Because i saw in another thread of Lenovo K8note titled firmware, users unable to unzip due to error in system img. Also downloading from baidu needs a user id. If its possible could you or anyone else reading this upload it in some other online storage drive. Im little bit worried about getting a worse situation while rooting. Even if it goes wrong i can use the stock firmware to make it back.
Click to expand...
Click to collapse
There is mega download link available too
https://forum.xda-developers.com/an...8note-original-firmware-t3679499/post73946000

lenrussel said:
There is mega download link available too
https://forum.xda-developers.com/an...8note-original-firmware-t3679499/post73946000
Click to expand...
Click to collapse
Thanks for the reply. Anyhow got a work around for downloading from baidu using chrome extension, without account. Just wanted to confirm whether the firmware zip is working fine. If some one used it and been successful, please do tell me.

ysalunke007 said:
It's easy bro check this guide
https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Fastboot Guide
http://www.stupdroid.com/2016/08/flash-stock-rom-via-fastboot-on-android.html?m=1
Click to expand...
Click to collapse
Do i have to unlock bootloader again after flashing the firmware in order to root the device?

lenrussel said:
Do i have to unlock bootloader again after flashing the firmware in order to root the device?
Click to expand...
Click to collapse
Yes, I think so. Anyhow there is no need to unlock oem again if you are flashing the rom via TWRP. Anyhow let someone confirm about it.

peacelover94 said:
Yes, I think so. Anyhow there is no need to unlock oem again if you are flashing the rom via TWRP. Anyhow let someone confirm about it.
Click to expand...
Click to collapse
There is a error while extracting zip file of the firmware .just checked, I downloaded it from mega.i want to confirm if its the same for baidu also

lenrussel said:
Do i have to unlock bootloader again after flashing the firmware in order to root the device?
Click to expand...
Click to collapse
No need to unlock bootloader again if you use fastboot method to flash stock firmware , & for spflashtool I'm not sure but I think it remains unlocked

lenrussel said:
There is a error while extracting zip file of the firmware .just checked, I downloaded it from mega.i want to confirm if its the same for baidu also
Click to expand...
Click to collapse
No error while extracting firmware downloaded from baidu