What is the best recommended settings to SETCPU??
thanks
http://forum.xda-developers.com/showthread.php?t=985752
http://forum.xda-developers.com/showthread.php?t=828572
http://forum.xda-developers.com/showthread.php?t=976775
I would not mess with the settings if I were you.
I have mine on conservative at all times. If you have ever burned up the cpu or underclocked it too far then you know what I mean.
Set cpu? Lol. Why pay for what your droid can do on its own?
Hmm the words foot in mouth come to mind lol see comment below. £:0 ← €≥√
Still I like cpu Tuner.. its a nice app if you don't have one ur attached to.
Sent from my HTC Magic using Tapatalk
A)Set to Smartass governor.
B)Clock MAX speed to anything you want to (make sure its below 1870MHZ or you will have crashes
C)Set/leave MIN at 245MHZ
Make sure you get a custom kernel ( Lee's Is good with his ROM - LEEDROID)
Also have a look at the links CitizenLee posted -Especially the last one about the governors.
Good Luck!
P.S. Avid Droidery : SetCPU Is available FREE to all XDA members
why dont i have option of smartass ect?? also i cant set it as high as anyone else
snowwhite007 said:
why dont i have option of smartass ect?? also i cant set it as high as anyone else
Click to expand...
Click to collapse
As someone mentioned above, you need a custom kernel.
snowwhite007 said:
why dont i have option of smartass ect?? also i cant set it as high as anyone else
Click to expand...
Click to collapse
You need to flash a custom kernel - have an exploration around the Desire HD Android Development Board.
As I mentioned earlier - have a look at Leedroid's Kernel in conjunction with his ROM - Fantastic.
Cheers guys missed that mite flash his new gb rom tom
Sent from my Desire HD using XDA App
Buy What is the best recommended settings to SETCPU????
What to write ?
See all those links I posted? It wasn't just for ****s and giggles... read them and you'll see this question has been answered over and over
To the attention of all ROM/Kernel devs I would like to introduce the one and only RAM solution for android
Developed and updated by zeppelinrox, the V6 Supercharger Script:
http://forum.xda-developers.com/showthread.php?t=991276
Some may have heard about it, some may have read/written a thread about it, but I want it to become more popular, at least here in the SGS community.
The ROM I'm on has this ram script integrated, but I feel that there is more that could be achieved for both ROM and Kernel related Ram management.
If you reed carefully you will notice that latest update of the script has included a 'hard to kill launcher' and 'kernel tweaks' options in the installation. And since I have no idea about code I would like the devs of this community to try, think and maybe open an united project for proper integration of this script on our device.
Since my time on the XDA I have come to realize after countless flashing how many people do real and hard work and share it here on this forum. I humbly bow before you all in respect and ask you as a fan, as one looking upwards filled with hope , to consider.
I thank you for your spend time in advance.
Cheers from Bulgaria and again props for all hardworking people in this forum
moe
The opinions of people using the Supercharger script in their systems would also be very appreciated for making this script more popular.
Free RAM levels with integrated Supercharger in Simplicity ROM
- Multitasking Ram levels: 50s/60s
- Normal Free Ram levels (with excluded widgets): 90s/110s
- Gaming Free Ram levels: 140MB +
This is on GalaxianEE Kernel with 334MB Free Kernel Ram
Really .. no interest ...
The developer of this script wants people to be leaded to original page of the script, he does not want developers to intergrate it to their rom.
Edit: ignore what i said...
Sent from my GT-I9000 using xda premium
its very useful
i use customized settings(option 10)：10 16 24 48 56 72
no launcher redraw,no memory leak,everything smooth
sun8ross said:
its very useful
i use customized settings(option 10)：10 16 24 48 56 72
no launcher redraw,no memory leak,everything smooth
Click to expand...
Click to collapse
This is exactly the feedback I was looking for. Thanks sun8ross!
Please, any other users feedback will be also greatly appreciated.
hmm i tried it, but it seems like the improvement is negligible... is it because our SGS already has plenty of RAM? The script was made for low-RAM phones in the first place right?
sun8ross said:
its very useful
i use customized settings(option 10)：10 16 24 48 56 72
no launcher redraw,no memory leak,everything smooth
Click to expand...
Click to collapse
So i was playing more with the settings, and finally mine are:
/sys/module/lowmemorykiller/parameters/minfree
[2560, 4096, 6144, 11264, 13312, 16384] [ 10, 16, 24, 44, 52, 64]
/data/SuperChargerMinfree
[2048, 4096, 12288, 18432, 24579, 30720] [ 8, 16, 48, 72, 96, 120]
and, wow!
I'd wish it would be integrated in roms or kernels. it's simply the best. but it's to complicated, for doing it every time i change the rom (or/and kernel?)
moegrave said:
So i was playing more with the settings, and finally mine are:
/sys/module/lowmemorykiller/parameters/minfree
[2560, 4096, 6144, 11264, 13312, 16384] [ 10, 16, 24, 44, 52, 64]
/data/SuperChargerMinfree
[2048, 4096, 12288, 18432, 24579, 30720] [ 8, 16, 48, 72, 96, 120]
and, wow!
Click to expand...
Click to collapse
Sorry for the noob question, but why do you list two sets of parameters? I can only set one when running supercharger...
ZioGTS said:
Sorry for the noob question, but why do you list two sets of parameters? I can only set one when running supercharger...
Click to expand...
Click to collapse
As far as I get it, the supercharger script overwrites the stock OS LMK settings, but with that it works on demand and chooses how to act (before and instead of the stock os one)
The values in /sys/module/lowmemorykiller/parameters/minfree are the stock ones, I think..
The ones in /data/SuperChargerMinfree are the ones which the script uses to overwrite.
I listed the two values, because we have a safe backup for playing with the values as far as I understand from reading in the original thread.
That's why I listed this thread in General, because I need more opinions. And on the thing if it's only for low RAM phone, I do not agree. This script have massively improved all RAM management that I have ever wanted.
Please feel free to share settings and opinions on those settings in this thread!
P.S.
ZioGTS, not a noob question, but a good remark for me not being clear enough. Thanks
one with failed l' to have on Rom GingerReal but damage
moegrave said:
ZioGTS, not a noob question, but a good remark for me not being clear enough. Thanks
Click to expand...
Click to collapse
Thanks to you! I'm currently testing MegaRam 1 setting, but I think it's a little bit unbalanced on sgs... Maybe needs some tweaking.
Sent from my GT-I9000 using XDA App
ZioGTS said:
Thanks to you! I'm currently testing MegaRam 1 setting, but I think it's a little bit unbalanced on sgs... Maybe needs some tweaking.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
UPDATE: I tried your settings (8, 16, 48, 72, 96, 120) and I feel they are much better than MegaRam 1!!! I'm sticking with these values for some time and see what happens. Thanks!
ZioGTS said:
UPDATE: I tried your settings (8, 16, 48, 72, 96, 120) and I feel they are much better than MegaRam 1!!! I'm sticking with these values for some time and see what happens. Thanks!
Click to expand...
Click to collapse
I played around and found out that these settings work really nice for me. Not too aggressive and yet I have a lot of free RAM for multi or single tasking. Thanks for the feedback!!
Hi,
I just thought that I will share my settings for SGS as well. I've already played around with various settings like: Agressive (option 1); Balanced 1.2.3 (options: 4,5,6); MegaRam 1 and 2 and a few my customized settings.
With every setting I had a bulletproof launcher (it was not restarting at all), but I found that after a day of using a phone the applications started to start slower.
Again I made some customized settings and now use the following numbers:
6,8,30,60,80,100
Maybe it will work for some one as well.
vitoski said:
Again I made some customized settings and now use the following numbers:
6,8,30,60,80,100
Click to expand...
Click to collapse
Nice, actually my initial settings were: 8, 12, 40, 60 ,80, 100.
I have two questions for you: 1) what is your normal free ram values
2) have you tried my settings
moegrave said:
Nice, actually my initial settings were: 8, 12, 40, 60 ,80, 100.
I have two questions for you: 1) what is your normal free ram values
2) have you tried my settings
Click to expand...
Click to collapse
Sorry but do not remember what settings I had before I applied V6supercharger. Nevertheless my free memory was something around 50 MB. Now with current V6sett I have around 70-80.
What I found is that every time I start "Cut the rope" game, both contacts and dialer get killed.
If I go with balanced settings, there is a high chance they will stay in memory, but the apps start slower after a day or two.
So the best compromise would be to have the settings that prevent our most willing apps to be killed and the other not.
Best of the best solutions would be to have a chance to decide which app is running on each slot of Lowmemkiller. This case we could have our contacts and dialer untouched even with low memory...
Now we can only guess. Somewhere I read that most apps run in slot 3 therefore giving this too high value will cause them to be closed by any further app start.
There is no point to have more free ram if android needs to load the same app over and over again cause it got killed already...
Sorry for making it so long
EDIT:
I had to modify my settings, because when I played high resources consuming game it closing after a short while and I was left with home screen...
Now I have the following values:
6,8,26,34,60,80
They were already tested with same game and other things. So far so good, however I think apps start a little bit slower.
Just to make everything straight, I am on Galixian GT.
Anyone has some other good configuration? Maybe you use SuperchargerBeta3 with kickasskernel?
Sent from my GT-I9000 using xda premium
vitoski said:
Sorry but do not remember what settings I had before I applied V6supercharger. Nevertheless my free memory was something around 50 MB. Now with current V6sett I have around 70-80.
What I found is that every time I start "Cut the rope" game, both contacts and dialer get killed.
If I go with balanced settings, there is a high chance they will stay in memory, but the apps start slower after a day or two.
So the best compromise would be to have the settings that prevent our most willing apps to be killed and the other not.
Best of the best solutions would be to have a chance to decide which app is running on each slot of Lowmemkiller. This case we could have our contacts and dialer untouched even with low memory...
Now we can only guess. Somewhere I read that most apps run in slot 3 therefore giving this too high value will cause them to be closed by any further app start.
There is no point to have more free ram if android needs to load the same app over and over again cause it got killed already...
Sorry for making it so long
EDIT:
I had to modify my settings, because when I played high resources consuming game it closing after a short while and I was left with home screen...
Now I have the following values:
6,8,26,34,60,80
They were already tested with same game and other things. So far so good, however I think apps start a little bit slower.
Just to make everything straight, I am on Galixian GT.
Anyone has some other good configuration? Maybe you use SuperchargerBeta3 with kickasskernel?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
can you run kickasskernel with galaxian GT? i can't. If you get boot loops try flashing speedmod kernel t10
Hawkeye1103 said:
can you run kickasskernel with galaxian GT? i can't. If you get boot loops try flashing speedmod kernel t10
Click to expand...
Click to collapse
Same here... Bootloops with galaxian and kak... :-(
Sent from my GT-I9000 using XDA App
Just wondering if it's possible to overclock the CPU or GPU of the Tegra Note 7?
It's obviously a fast device anyway, but just out of interest.
Thanks in advance!
sure you can overclock.
cars10k said:
sure you can overclock.
Click to expand...
Click to collapse
What software do you recommend?
I am using trickster mod
cars10k said:
I am using trickster mod
Click to expand...
Click to collapse
Thanks are you just overclocking CPU or do you overclock GPU also?
never needed gpu for now, so just cpu =)
Nvidia already released source..?
Sent from my SGH-I317 using xda app-developers app
I have installed trickser mod and rooted the device but the maximum allowable frequency is 1.8ghz. How should I allow higher options to be selected?
Thanks again
Edit
Do I need to install a different kernel? If so please could you advise which one to use and if possible a brief instruction of how to install. Thank you!
jp7152 said:
I have installed trickser mod and rooted the device but the maximum allowable frequency is 1.8ghz. How should I allow higher options to be selected?
Thanks again
Edit
Do I need to install a different kernel? If so please could you advise which one to use and if possible a brief instruction of how to install. Thank you!
Click to expand...
Click to collapse
I don't think development has reached that point yet. As far as I'm aware, there are no custom ROMs or kernels available. I'm personally a little worried that there isn't enough interest in this device to where we'll ever see those things, but I'm keeping my fingers crossed for a beautiful CM11/Shield hybrid ROM brought to our beloved tabs!
That's why I was confused as cars10k has been overclocking I think.
Maybe it's something from the Shield forum ?
jp7152 said:
I have installed trickser mod and rooted the device but the maximum allowable frequency is 1.8ghz. How should I allow higher options to be selected?
Thanks again
Edit
Do I need to install a different kernel? If so please could you advise which one to use and if possible a brief instruction of how to install. Thank you!
Click to expand...
Click to collapse
Tonight shaky 156 will release his kernel.
Sent from my TegraNote-P1640 using Tapatalk
Hello,
I'm a Senior-Moderator in the biggest german speaking Android community. A user has discovered a way how you can optimize the RAM management and multitasking on the LG G3 2GB RAM version. More and more users are reporting about apps, that are closed to fast. Also for me, this was very depressing.
We are not responsible for any damages to you, your device or your data!!!!
Of course you will ned root for this.
When you look at a Nexus you can see, that multitasking works much better. This isn't only the fact, that on Nexus devices don't runs any OEM software. The main problem is, that the 3GB and 2GB versions often run with the same ROM. When you start the G3 about 1.3 GB of RAM is used. When you start the Nexus 5 for example, only about 800-900MB is used.
LG defines these values, how much RAM should be used by the system, in the "build.prop". If we change these values, we can reduce force closes at multitasking.
You have to change following values:
"ro.sys.fw.mOomMinFree1"
....
...
"ro.sys.fw.mOomMinFree6"
To change these values, you can use this tool for example: https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor
When you use Lollipop klick on the PENCIL right on the bottom! Don't edit it with the UI you get presented first!
These are the recommended values (the values are given in KB):
Code:
ro.sys.fw.mOomMinFree1=49152
ro.sys.fw.mOomMinFree2=61440
ro.sys.fw.mOomMinFree3=65000
ro.sys.fw.mOomMinFree4=70000
ro.sys.fw.mOomMinFree5=80000
ro.sys.fw.mOomMinFree6=100000
NOTE!!!! These values are not final and you can test other values. We would appreciate that! So we could find the perfect values for our G3!
Credits:
The analysis and the recommended values goes to this user here: @systemstress
Translation by me
tried but seems not working never ending reboot...
Same config :laugh: http://forum.xda-developers.com/showpost.php?p=56228170&postcount=1259
Important!
This is not working on Lollipop, phone will restore defult valute after reboot (if you are unluckey bootloop?)
Settings stick for me on AN 3.3. Dont know if they are better or not at the moment
The values remained after reboot for me, so I guess does work on Lollipop
robalm said:
Important!
This is not working on Lollipop, phone will restore defult valute after reboot (if you are unluckey bootloop?)
Click to expand...
Click to collapse
It works just fine on mine (2GB D855) and I'm on Chupachubs Lollipop rom. I used the suggested tool and no bootloop and changes are persistent.
---------- Post added at 08:28 PM ---------- Previous post was at 08:12 PM ----------
Okay this REALLY makes a huge difference on my phone!!
I have debloated the rom as much as I could, but it still wasn't good.
With this fix it's simply perfect!!
Like my good ol' Nexus 5!
Thank you sooooo much!
Running Facebook, Maps, Chrome and Google Inbox and no apps close down on 2 GB version!
i have 3gb G3. will these settings work? thanks
Sent from my LG-D855 using xda premium
robalm said:
Same config :laugh: http://forum.xda-developers.com/showpost.php?p=56228170&postcount=1259
Click to expand...
Click to collapse
As I said. I took the settings from a user in our german speaking board.
It works definitely on Lollipop. I have configured my build.prop like this and more RAM is available for multitasking now.
will this drain battery faster if apps aren't closed?
Sent from my LG-D855 using xda premium
Nope. RAM is always under voltage. It is doesn't matter if the RAM is full or not.
@ phankhi ....you dont need this settings with 3gb ram
@systemstress Discovered something. When you use the build.prop Editor App, you have to click on the pencil right on the bottom. Then it will be saved after a reboot. Otherwise there can be problems.
You can also use any app that lets you change OOM values, like tricksterMOD or 'memory manager' by JRummy.. This will change the value just after boot and leave the build.prop unchanged.
Works!
Can feel and see it directly.
There is a big difference with those values :
http://forum.xda-developers.com/lg-g3/general/guide-build-prop-tweaks-free-ram-t2825693
What will it change and what is supposed to be the best?
Rafael1000 said:
There is a big difference with those values :
http://forum.xda-developers.com/lg-g3/general/guide-build-prop-tweaks-free-ram-t2825693
What will it change and what is supposed to be the best?
Click to expand...
Click to collapse
The values in that thread are just plain idiotic, even on the 3GB model. You need to free up sufficient RAM so that any app can run, but not so much that you close everything.
Not working for me... D851 3gb version.
Reposted thread
I already make this thread on July 2014
See here
http://forum.xda-developers.com/lg-g3/general/guide-build-prop-tweaks-free-ram-t2825693
I'm on 2gb ram 16gb roms..
The ram usage is very very iritating
spiderio said:
Reposted thread
I already make this thread on July 2014
See here
http://forum.xda-developers.com/lg-g3/general/guide-build-prop-tweaks-free-ram-t2825693
I'm on 2gb ram 16gb roms..
The ram usage is very very iritating
Click to expand...
Click to collapse
Your 'tweaks' are the exact opposite to this. As has already been said, we dont want more free RAM, we want less, we want the RAM to actually be used, which is the point of it being there..
Hi there guys
As always I am the hard gamer back with a new guide
So basically most of us have questions about kernels and what are governors doing
Kernel is basically connecting your system. Apps to the hardware, without kernel your hardware will not know what to do when any input is provided.
Governors are different CPU throttle controllers they have been created with thresholds containing how and when to online or offline a core depending on its usage
Let's talk about Alucard governer- one of my favorite
Alucard basically on our phones acts as balanced governed it mostly clubs all the work in one core you can see the parameters defined in settings as to when to online another core it just focuses on clubbing more work in less cores with lowest frequencies
Ondemand--quite outdated governer now replaced by interactive on demand is quite some to understand it just on lines the core as soon as inputs are received which is quite dumb as it costs battery
ZZmove---Another powersaver i have seen its throttling it basically tries to club work in all cores which are at their lowest frequencies this governed causes a bit lag till it settles with your usage
So Go on and ask any doubts about governers
I myself monitor the throttle and report here
Queries are welcomed
Queries will be answered as fast as possible
I will add more governers soon
Anyone wants a porting guide
I will add pics when I get my PC back
The Hard Gamer said:
Anyone wants a porting guide
Click to expand...
Click to collapse
I want if your guide is easier than mshoaib
Sent from my Lenovo A6000 using Tapatalk
Prince153 said:
I want if your guide is easier than mshoaib
Sent from my Lenovo A6000 using Tapatalk
Click to expand...
Click to collapse
Nothing is easy
And shoaib is the one who taught me
The Hard Gamer said:
Nothing is easy
And shoaib is the one who taught me
Click to expand...
Click to collapse
Then what's the difference between your and shoaib's guide ?
Sent from my Lenovo A6000 using Tapatalk
Prince153 said:
Then what's the difference between your and shoaib's guide ?
Sent from my Lenovo A6000 using Tapatalk
Click to expand...
Click to collapse
He has not mentioned editing of boot.IMG
And he has not mentioned how to port Nougat
The Hard Gamer said:
He has not mentioned editing of boot.IMG
And he has not mentioned how to port Nougat
Click to expand...
Click to collapse
Okay than bring a guide
Sent from my Lenovo A6000 using Tapatalk