[HELP] Charging problems - Zenfone 5 Q&A, Help & Troubleshooting

In a beautiful day, when I forget my charger at school, I used my PC to charge my cellphone ( just 2 days like that) and the cellphone was detecting like usual: If connected to pc it shows charging over USB, If connected to AC it shows AC. Ok then, so What is the problem? After One week, when I was travelling using the phone as usual the battey ended and cellphone turned off at 0% (perfectly normal), as soon as I was travelling I used car charger to charge my Zenfone (It is an 2A car adapter). When I connected the cellphone (I was on Stock ROM) it take more time to detect charger than usually (like when you connect it the phone instantly shows the battery icon when off) it takes over 20s connected to charger to show the battery logo, the phone was saying that 1/4 of battery has been charged (WTF it was totally discharged from 100% to 0% and when I put 20s it charge that much? This is not possible I tought). When I turn the phone on it was showing 30% OF BATTERY, I wondered how that could happen. (I alreay saw this bug on my friend's cellphones from other brands like Samsung & Motorola). Anyway, when I saw those 30% I saw the battery graph (wich shows if is on AC or USB) and it was showing charging over USB. BUT HOW THAT COULD BE USB, ITS A FRRAKING 2A CHARGER WTF ZENFONE. I tested on my sister's phone with same cable and same charger, it was showing charging over AC as well. When I finally get home I let it charging, after 1h30m it just charged 15% with Asus AC charger & at the battery graph still showing charging over USB, when I tried to connect it to computer the phone was showing charging over USB (btw it was ok because it was on PC) but windows doesn't said nothing was connected, no USB mismatch, NOTHING. I was on panic. WTF HAPPENED TO MY CELLPHONE. This day I decided to go to Marshmallow, soon as I have root and TWRP pre-installed (when I still have usb connection {3 months ago when I made root}) So I downloade RR zips, upgraded, everythig was ok, Marshmallow Running successfully. But one thing wasn't ok, the freaking charger detect. It was still saying "over USB" but it was on AC. Tried to go o bootloader, no answers from the phone either from windows. I bought an USB-OTG adapter, not working too. I bought an new microusb sub board, replaced it to the new one. No success, still saying charging over USB, no pc connection. Just one thing chaned: OTG before SubBoard change it doesn't even gave energy to "feed" the pen drive, mouse doesn't work too. This night was when I became freaking mad, I let it charging, when I turn the phone on it has just 25%. 6h Charging and 25%. I said to myself, this couldn't be possible, no way dude. I don't know what to do anymore, I'm desperate, is the only android phone that I have, already tried many chargers, many cables, many different computers, no clue of what happened with this cellphone. So is not an hardware issue (as soon I already had this issue, but it get back to normal by itself last time, I didn't do anything) but now it has been 1 month charging "over USB with short battery life. What am I suposed to do now? I tried repair battery life PRO, app from an XDA member. It says everything OK with battery, screenshot below: (translate: No problems founded). And another screnshot of the USB problem. As you guys can see my battery graph is sh*tty, never get to 100% in one day because of this issue.
@gadmei.tw @TecnoTailsPlays (New thread that I was saying).
Please anyone help me, I don't know what to do anymore . I always helped guys with other issues on RR and other rom's issues, now please I need you guys to help me.
Sorry for my bad english, I'm from Brazil and I'm nervous now.
Thanks XDA :crying:

I half read your story .I think your battery is miscalibrated.You need root and a app to calibrate it.
Say thanks if it helped.

Related

Qtek 2020 - Can't recharge the battery

Hello,
I bought a second hand Qtek 2020. The seller didn't have a cradle, but he gave me a USB sync/charge cable and a AC plug with USB slot. So I insert the one end of the cable to the PDA, one end to the plug and I recharge.
The device came with 90% charge and I could easily charge it to 100%. Today, I ran it down to 0% and now I can't recharge it!! Every time I turn the device off and plug everything in, it starts to recharge. The led on top shows red. It charges for about a minute and the device wakes up. The red light turns yellow. It says on the screen that the device is still charging but the meter is stuck at 0%!!!
I've been trying for hours but I can't even get to 1%. Maybe it would be better if I had a cradle but that's not an option now. Besides, it recharged beatifully yesterday.
I have a feeling that if I can stop the device from waking up automatically when charging, I can recharge fully, but I don't know how.
Any help will be very appreciated.
Update
Here's a quick update. It's gone from bad to worse. Now I only have a blinking red light and the device doesn't come on at all!!
Any advice please?
Have you made sure that the plug is connected tightly to the PPC? If the charge isn't being held, then the battery might be the culprit.
li-ion batts have a limited number of times it can be recharged before it's lifespan is over
maybe your batt's time is up ?
Follow-up
OK. I bought a new battery and everything works fine now. So if you're having a similar situation, a new battery may solve your problem too.
same problem
I had the same problem as you. When the battery was on 30% to 90% it could be easily charged via USB from PC or via usb adapter. Once the battery fall under appr. 20% I was unable to charge it. I wanted to throw to the garbage. I have done many upgrades many resets. While the qtek was without any software (nothing was installed on it) tha battery successfully charged. So used the qtek as ussual and tried to charge it before 20%. BUt now it fall again under 20% and it's happening the same, I can't charge it. The other strange think is, that I have tried 5 computers with USB.1 and USB.2 but is didn't help. Only one computer can charget from 0% to 100% and this one is in my work.. very strange and don't know what couse this... Normaly the battery holds power for two and half days, so don't wan't to buy new one now. If anyone has any explanation why it can be charge only with "one computer" or what can that couse, I really appreciate it.
Thank you

Wizard not working -- battery or phone???

Hi everyone!
I have just recently acquired an old imate k-jam that was not working
I managed to resurrect it for a wile by connecting 5v to the battery for a minute and then it was working for bout half a day and ten it just stopped working.
Now i need to use a 9v batter to get it to start and after 2mins it will just stop and the battery will be at 0v again.
Now do you guys think this is my battery being stuffed or is it the phone?
Stupid Question:
Is this the only way you're charging the battery? =-O
The connection wires to the battery is an "emergency jump start only" procedure. It's only used because the Wizard won't charge unless it can first boot.
You should connect your Wizard to a charging source as soon as (or before) it boots.
The AC wall charger is the best. Lacking that, use a USB cable that fits or a car charger, if you have one. The USB / car charger methods will take many hours longer. Also, avoid using the Wizard while it's charging. Just let it charge until the LED goes from orange to green. THEN if you get just a couple of minutes, it's new battery time.
If the Wizard boots, it's very unlikely that it's the Wizard/k-jam.
My Brother-in-law gave me his "old" Cingular 8125 when he "upgraded his phone", he said it was "too heavy and clunky and hard to use". Battery was deader than the proverbial doornail. After the "jump start", it took a full 8 hours of charging via the car charger and computer USB cable to get it to green. (He left the wall charger in South America somewhere.) The battery has been working fine for the last 8 months.

HELP > Battery Is Not Charging at all (Via WallCharger / Computer USB)

Damn it..... i dont know what happened
it is still working perfectly yesterday
i did not drop the phone or battery, today the battery is still at 40% and as usual, before i went to sleep, i plug my phone on the USB Cable connected to my computer... but it is not charging.. and here i thought the error comes from my USB Cable , so i plug it into my wall charger ... but it is not charging at all!!!
and i thought, perhaps i have installed something , or some os faulty issue ... so i reset the phone via SETTINGS > About > Reset Phone
and after the reset.. it is still not charging...
argh what should i do... please help... anyone
i purchased this phone from singapore.. and i am indonesian.... the battery is currently at 30% , i am so afraid after it runs out of its juice, it will go away forever (because i cant charge it) T.T
what should i do....
(Is this battery and the one used on Galaxy S is the same? My sister has Galaxy S, should i try using her battery and try to charge it from my phone? .... ARGHHHH the omnia 7 is not even available yet in indonesia) T.T
Anyone help T.T
Get another charger it will charge get a new 1
Sent from my Nexus One using XDA App
you sure it is the charger?
You are talking about the wallcharger right?
usually it already charging via USB Connected to a computer.. but this time... the computer does not even detect if anything is connected.... (nothing happened when i plug this phone to my pc, usually there is a notification sound playing and my zune will autorun)...
damn it ... why this happened.. yesterday it is just fine (
damn it .. i am sleepy already..
i will go and sleep for now.. and left my phone turned off and plugged in the WallCharger
and hopefuly.... sigh.. it is still charing although no indication whatsoever is showing that
MAN... should i just try bang the damn battery hard onto the table... perhaps some of the chip inside the battery is misplaced by whatever unknown forced?!
damn it.. i never dropped the phone.... ARGHHHHHHHHHHHHH
this is so frustrating
Relax
Relax man your charger is bad.
I have the same problem but my girlfriend have a Wave and start using his charger and everything works fine.
Buy a new charger
question
can i use any charger from any phone for this Omnia 7?
(the one that has USB Output of course, such as xperia1 charger)
if we can, then it is also not working.... and why suddenly it wont do anything when i plugged it in my Computer USB
the very same computer works perfectly yesterday, and suddenly it is not working..
I suspect either one of these is the problem :
1. the micro USB Connector in the Phone is broken somehow , hence the when we plugged it on, it does nothing
2. the Battery (which if i am not mistaken has a chip inside) is broken, hence explain why it is not charging at all (which a bit does not make any sense, if it is just not charging at least when i plug it on the computer, it should still detect this device...)
I am from indonesia, i can ask my friend who is returning from melbourne to purchase a new battery and new charger hopefuly
Okay to make things simpler.. i have a sister who own a Galaxy S
can i use the galaxy s wallcharger to charge my omnia 7? ah hell,i will try it anyway...
okay according to this
http://www.samsung.com/us/mobile/cell-phones/SGH-I917ZKAATT
it goes great with galaxy s standard battery...
so i suspect, i can use my sister galaxy s standard battery and try to charge it using my cellphone
and i can also try to use my sister galaxy s wallcharger to charge my battery...
okay lets try ... hopefuly.... it is only the battery.. i can easily purchase a new battery... if it is the USB Connector on the phone... damn, how on this green earth can i charge my battery? OH we can use the kickstand battery charger?
hmm suddenly it is working now :O
thanks God... hopefuly it will never ever happened again T.T
Great it is working again
Any possibility that there is a way that the device forces a full recharge cycle to calibrate the battery?
Honestly i guess so.
I have the same problem...i can t charge my i8700 at all...what did you do to charge again???...i use a universal charger where i put my battery ...this happens for two weeks now..
cody28 said:
I have the same problem...i can t charge my i8700 at all...what did you do to charge again???...i use a universal charger where i put my battery ...this happens for two weeks now..
Click to expand...
Click to collapse
Try allowing the phone to run out of battery and turns off, then plug it into the charger, i would love to know if this is a failure or be design behavior.
Put the battery in the phone,
Wait untill the phone goes completely off.
Plug the phone to the wall charger.
write back here
i tryed this but the same problem it turns on but only while the charger is pluged in when i pull it out the phone turns off...i try to hard reset nothing..there is no update to work with non retail devices...the phone is from three uk...i m from romania there is no way to return there to an service..(
Having the same problem. Been working flawlessly.Plugged it in a couple of hours ago,but it doesnt appear to be charging.
When I use the USB charger on the PC, it is recognised, and Zune opens up fine and Phone shows up.
Have tried two Mains chargers, the Omnia 7 one and the one that came with my Galaxy S, same problem.
EDIT:
Left it plugged in overnight and it charged fine.Used phone, going down to about half battery.Plugged it in and seems to be charging without a problem!
I've got the same problem as you guys for a couple of days now.
Thanks for your reactions i will try everyone of them untill my omnia 7 charges again
knetsooj said:
I've got the same problem as you guys for a couple of days now.
Thanks for your reactions i will try everyone of them untill my omnia 7 charges again
Click to expand...
Click to collapse
Do you have a bit of battery left?
Windows Phone 7 devices power up when you plug them in. Maybe the OS is not booting and because it is S-AMOLED display we cannot tell if it is on or not.
Try Hard Resetting without booting WP7
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Omnia_7
Make sure you have a bit of power though, you don't want that to stop in the middle of the proccess
This has happened to me a couple of times. I think it's just a reporting bug, the battery is actually charging. I just have to restart the phone and it magically has charge
battery is charging too long
How long does take to fully charge the battery? For me it's about 4-5 hours with wall charger. Should not it be faster?
Mine is about the same for a full charge and I have also noticed my Omnia 7 not charging properly when I plug it into my MacBook Air however it does seem to charge fine on my Dell laptop for work.
Maybe the Omnia 7 is very sensitive for charging over USB on a laptop and needs a certain voltage for it to charge properly?
What works for me:
1. Original charger
2. iPhone 4 charger
3. iPhone 3GS charger
4. Blackberry Curve charger
Not tried any other micro-usb cables yet but will do at some point in the future.
I had the same problem too. The battery was suspiciously showing high levels for the last three days (went without a charge!). In the morning, the alarm did not go off, and I realised the battery was dead dead! Charged (wall charger) for 1.5 h without any use -- would turn off if I unplugged. Tried with the USB cable too (connecting to computer) and no use.
I read this post, and tried with the wall charger again, and it shows me ~60% battery, and seems to be charging normally!
Will post an update, but really seems like a forced discharge cycle to me too!!
Thanks for this thread, and I am interested in seeing if any more ppl are seeing such issues!
At least once, but sometimes twice a week, my battery keeps discharging while my Omnia 7 is attached to USB. And even the icon shows it should be charging.
The solution I use is taking the battery out for 10-15 seconds, put it back in, switch the device on, and charging works like it should be.
I hope they come up with a solution, because it's quite annoying.
Willem
Netherlands

X10i not turning on / charging

Hi guys,
Suddenly facing a strange problem since last night.
My x10i was running out of charge & i connected to the comp to charge while i was working. I noticed the charging speed was extremely low, so i restarted the phone to see if it would help. Did not.
Thought there is some problem with the cable, used a different cable as well, but no use.
The slow charging had stopped and eventually the phone died.
Tried connecting to the socket & charging, still no use.
The red led blinks when i connect the phone to a charger via the usb or the socket.
needless to say the phone does not even boot up now, obviously for no charge...
any ideas wat maybe wrong or wat i could do ?
please advice
Have you tried to let it charge for some time in off mode? As long as your battery is not dead, and the phone get the right voltage through the USB connector it should charge in an "emergency mode". This is a slow way of charging, but allows for charging without any electronic circuits to monitor it, it is not the same as the charging screen that usually displays when you connect the phone while it is powered off. Usually when a phone is completely discharged it needs to be connected at least 15 min, sometimes a lot longer, before the electronics kicks in, and starts the speedcharging.
My best advise would be to connect it to the mains charger, or a USB port you KNOW supplies power. Some laptops cut down on the powersupply to the USB ports when they run on battery. Let it be connected for a long time (several hours), and then try to power it on again.
If that does not help three things can be wrong
1. Somewhere the USB connection is broken, either in the cable or in the connector on your phone (or on the PC's connector, but that is less likely).
2. The battery is dead, modern batteries contain circuits that actually disables the battery when any given parameters gets outside the defined limits. This is to prevent the battery catching fire. On some batteries this renders the battery useless, and you need a new battery.
3.) The mainboard of your phone is dead, and hence nothing works, can be ruled out if you can borrow a battery from someone to test if your phone works then.
I hope a good and long charge can sort out your problem, that is the easiest fix, and it is free.
Hi O_K,
well, i have been charging (or trying to) the phone since it died last night.
i have used different chargers & different modes of charge (through the system & the wall socket) - no joy at all.
the LED blinks red a couple of times when connected.
Very occasionally, the SONY ERICSSON logo (startup) shows on the screen & it switches off again, back to the blinking.
So charging for a long time & through different chargers has not helped.
gonna try a different battery now to see if that can help.
Thanks for your response!
well, tried switching chargers & batteries.
The problem seems to be with the charging unit on the phone (USB)
with any charger or battery, wen connected the led blinks (like wen the phone is charging), but there is no charge happening.
eventually the phone dies, even if charging
any ideas?
There is a thread some where in this forum for fixing the same problem you have...I don't remember the exact name of the thread..if I find it I'll post the link here..Anyways what the guy did was
-Pull the battery out and connect the charger till the led turns green.
-put in the battery now and charge the phone...
and I think that was it.
Hope it helped..
EDIT: Found the link.
http://forum.xda-developers.com/showthread.php?t=944322

Transformer Wont charge!!

ive had it for a month and a half and now its doing this, plug in the charger to the tablet and nothing. ive tried with different outlets aswell ive checked my power adapter to see if its one of the effected ones but mine was a pre assembled one. ive also restarted the tablet with no luck. time to call asus?
Do you have another device that charges by usb, that you could plug in to see if it sees anything for power? Not sure on the usb pinout for our chargers, but if someone knows, you could use a voltmeter to probe it and see if it has any output.
k got it charging now, hooked it up to my pc with the usb cord to see if the cord or the socket is shot, still connected to my pc....but it reinstalled device drivers as if i never used it on my pc. i turned usb debugging on then off, then i unplugged it and put the cable back into the power adapter and its charging
this is concerning, seems like a usb driver issue that effects the port not sure if i should call asus and do something about it
Sorry to bring this up but I started noticing this today too. I've had mine for about a month and everything's been fine. I noticed that the battery was in the 30s so I plugged it in via the a/c adapter and neither my battery widget nor the system battery icon change to the "charging state". I shut the device off to see if it would charge quicker and left it off for what must have been an hour and the battery has only increased by about 7%. I'm timing it now to see how long it takes.
This happened to me this morning. I couldn't get the tablet or the dock to charge. The dock was at 3% and the tablet at around 75%. Neither would charge either singly or together. I tried using a normal 5v USB charger for a few minutes, but without success. Then I fiddled with the charger and uncoupled the 3 pin UK adaptor. It then started charging. I'm not sure if it was coincidence or not, but at the moment it's working.
B50K tablet and B50K dock.
I have a B50 also running the newest firmware via Revolver 1.1.1, I just booted up my TF after an hour of it being off and connected to the A/C outlet to see how much it had charged. It increased 2% in the past 70 minutes. Something's Fishy here.
did u guys try method of hookin to your pc, then turn on usb debugging.
i havnt had any issues recharging since this thread was made
I connected it to the computer a few times and USB Debugging was already on, I just turned it off and I'll try and connect it again but I'm currently backing up stuff with CWM.
Edit: I just cycled USB Debugging a few times while it was connected to my PC. XP (virtualized through Arch Linux) recognized it each time, but still no change in the charging status. I'm going to unroot and go back to the stock 3.1 to see if it's a software or hardware problem.
Edit: seems to be a hardware problem considering I reflashed it back to stock (unrooted) and it's still doing it. Awesome.
Same problem here. All of a sudden I didn't see any status from the dock battery (dual battery widget). Tablet charges just fine, but the dock won't charge. even left it connected to charger overnight but the dock led just keeps blinking orange (/red). I'm afraid the dock will have to go RMA.
Just got an email back from Asus and they told me to fill out an RMA. It'd be nice if I got one out of the B70 batch as a return
edit: sadly, that didn't fix it. I re-rooted, let the battery drain down until it turned off and wouldn't turn back on, then let it charge for 2 hours. I turned it back on and the battery was at 5%

Categories

Resources