Hi,
my ZE551ML (4G-32G) doesn't boot after rooting try
after updating to MM I try to root it. after many try to do it, my asus doesn't boot to any mode (fastboot, recovery....) and never boot.
I try to fix it by xFSTK-Downloader it fail to boot to the OS I change 0×8000008 to 0×80008 with 4 zero not 5.
then it succeed to boot to fastboot.
then I try many raw file as .194 and WW_ZE551ML_2.20.40.139_sal358-amtech.vn.raw but it didn't finish flashing
I wait about 30 min but doesn't finish and in my device screen ( result: OKAY )
plz help me my zenfone 2 doesn't boot.
what I should to do??
thanks for all
bahaa87 said:
Hi,
my ZE551ML (4G-32G) doesn't boot after rooting try
after updating to MM I try to root it. after many try to do it, my asus doesn't boot to any mode (fastboot, recovery....) and never boot.
I try to fix it by xFSTK-Downloader it fail to boot to the OS I change 0×8000008 to 0×80008 with 4 zero not 5.
then it succeed to boot to fastboot.
then I try many raw file as .194 and WW_ZE551ML_2.20.40.139_sal358-amtech.vn.raw but it didn't finish flashing
I wait about 30 min but doesn't finish and in my device screen ( result: OKAY )
plz help me my zenfone 2 doesn't boot.
what I should to do??
thanks for all
Click to expand...
Click to collapse
after step try following guide. if works hit thanks and post in the following thread.
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Hi, since I tried to install CM 13 ZE500KL for my phone, I have a problem even with flashing stock rom. Can flash correctly. At the end it is written okay.
However, after the restart is the same or ERROR can not load invalid boot image! Thanks in advance for your help.
Hello,
I tried to root my Zenfone 2 ZE500KL but i didn't see that the method don't work with Android 6. Now, when I start my phone i have the message "ERROR: Can't load invalid boot image" with the ASUS Logo.
I tried a lot of things using ADB, like go to the recovery mode for format, installing from the ROM again from my SD. But the message stay...
I need your help now, car I don't find anything... Thanks !
i was using software Image: V13.1010.1612.53
HassanMahmoud said:
Hello,
I tried to root my Zenfone 2 ZE500KL but i didn't see that the method don't work with Android 6. Now, when I start my phone i have the message "ERROR: Can't load invalid boot image" with the ASUS Logo.
I tried a lot of things using ADB, like go to the recovery mode for format, installing from the ROM again from my SD. But the message stay...
I need your help now, car I don't find anything... Thanks !
i was using software Image: V13.1010.1612.53
Click to expand...
Click to collapse
Flash unlockbootloader.zip or boot.img (from rom) using twrp
https://drive.google.com/file/d/0B1pErR_Eg7cXdDdUNGQxQ0xqYms/view?pref=2&pli=1
HassanMahmoud said:
Hello,
I tried to root my Zenfone 2 ZE500KL but i didn't see that the method don't work with Android 6. Now, when I start my phone i have the message "ERROR: Can't load invalid boot image" with the ASUS Logo.
I tried a lot of things using ADB, like go to the recovery mode for format, installing from the ROM again from my SD. But the message stay...
I need your help now, car I don't find anything... Thanks !
i was using software Image: V13.1010.1612.53
Click to expand...
Click to collapse
Its easy to root asus ze551kl and unlock bootloader..contact me in inbox..
Hello.
I tried to root my zenfone 2 laser z00ed but something went wrong and when i booted up my phone it showed ERROR " can't load invalid boot image!
can u help, please?
When I booting my phone she is in ERROR MODE.
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
I can't go to recovery too the result is same normal booting but I still can boot into fastboot mode and I try to flash stock recovery or TWRP but it doesn't work.
What should I do now? :crying:
Thanks.
you need copy sdcard dload-> update.app your firmware stock
you need battery drain 0% if dead battery still hold power more than 2 mins then plug charging less than 1% and final hold both vol up+down power charging ac
Gamkutopolowk said:
you need copy sdcard dload-> update.app your firmware stock
you need battery drain 0% if dead battery still hold power more than 2 mins then plug charging less than 1% and final hold both vol up+down power charging ac
Click to expand...
Click to collapse
I'll try that If any progress I'll update soon.
Thanks for ANS
H4ckzTh said:
When I booting my phone she is in ERROR MODE.
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
I can't go to recovery too the result is same normal booting but I still can boot into fastboot mode and I try to flash stock recovery or TWRP but it doesn't work.
What should I do now? :crying:
Thanks.
Click to expand...
Click to collapse
Same thing happened to me and i solved this problem by using hwota method. If you were in 7, you can use this topic:
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page13
If you were in 8
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
Good luck
Gamkutopolowk said:
you need copy sdcard dload-> update.app your firmware stock
you need battery drain 0% if dead battery still hold power more than 2 mins then plug charging less than 1% and final hold both vol up+down power charging ac
Click to expand...
Click to collapse
@Gamkutopolowk Ok, I use this method and I'm stuck at "Your device is booting now".
Mr.Legend said:
Same thing happened to me and i solved this problem by using hwota method. If you were in 7, you can use this topic:
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page13
If you were in 8
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
Good luck
Click to expand...
Click to collapse
@Mr.Legend Yeah I'm in 8 and I run Replace_Recovery.bat to flash TWRP successfully but like I said I can't boot into recovery I don't know why.
I think if recovery work it'll be easier to bring she back.
It possible to flash entire rom via fastboot like nexus phone?
H4ckzTh said:
@Gamkutopolowk Ok, I use this method and I'm stuck at "Your device is booting now".
@Mr.Legend Yeah I'm in 8 and I run Replace_Recovery.bat to flash TWRP successfully but like I said I can't boot into recovery I don't know why.
I think if recovery work it'll be easier to bring she back.
It possible to flash entire rom via fastboot like nexus phone?
Click to expand...
Click to collapse
Stuck at the same point
@H4ckzTh did you manage to fix your phone?
tarekeldeeb said:
Stuck at the same point
@H4ckzTh did you manage to fix your phone?
Click to expand...
Click to collapse
Not yet, but I have already bought the new one.
And I find the solution using this program, link here. Maybe It's work.
Goodluck
H4ckzTh said:
Not yet, but I have already bought the new one.
And I find the solution using this program, link here. Maybe It's work.
Goodluck
Click to expand...
Click to collapse
Mm.. I cannot afford to buy a new one .. still struggling to bring it back.
I installed the Huawei Multi Tool >> Unbrick , added 4 images (skipping userdata.img), the tool states that all images are flashed successfully.
When I rebooted, got the same error
When I booting my phone she is in ERROR MODE.
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
Click to expand...
Click to collapse
How can I re-flash the eRecovery? I need to try the dload method with Update.app
Any help is appreciated.
tarekeldeeb said:
Mm.. I cannot afford to buy a new one .. still struggling to bring it back.
I installed the Huawei Multi Tool >> Unbrick , added 4 images (skipping userdata.img), the tool states that all images are flashed successfully.
When I rebooted, got the same error
How can I re-flash the eRecovery? I need to try the dload method with Update.app
Any help is appreciated.
Click to expand...
Click to collapse
you have different model region? or rebrand ?
H4ckzTh said:
When I booting my phone she is in ERROR MODE.
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
I can't go to recovery too the result is same normal booting but I still can boot into fastboot mode and I try to flash stock recovery or TWRP but it doesn't work.
What should I do now? :crying:
Thanks.
Click to expand...
Click to collapse
Use this method:
https://forum.xda-developers.com/p10-plus/how-to/unbrick-upgrade-huawei-p10-plus-android-t3818725
Gamkutopolowk said:
you have different model region? or rebrand ?
Click to expand...
Click to collapse
No, it's Europe/Middle East. Not changed.
I was trying to apply HWOTA when it brick. The HWOTA script seems to have corrupted partitions 30 and 33. Do you know what images should be flashed on those?
tarekeldeeb said:
No, it's Europe/Middle East. Not changed.
I was trying to apply HWOTA when it brick. The HWOTA script seems to have corrupted partitions 30 and 33. Do you know what images should be flashed on those?
Click to expand...
Click to collapse
Try Huawei MultiTool select tab unbrick check all
Gamkutopolowk said:
Try Huawei MultiTool select tab unbrick check all
Click to expand...
Click to collapse
I've done that, and the tool displayed success. But the problem persists.
Even double tried it, rebooted, same symptoms.
Any clue?