CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0.1(Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important information:
This thread is for Unofficial CyanogenMod 13.0 builds for chagallwifi (SM-T800). The following will not be supported here:
Custom kernels
Mods
Xposed
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Installation:
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Make sure you are on the latest bootloader (5.0.2 version)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Install the Banks Gapps (I used this) (Optional)
Reboot
Other issues?:
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/d....tortel.syslog
Downloads
Cyanogenmod:
18/05/2016 Build
https://www.androidfilehost.com/?fid=24533103863142006
Gapps package:
https://www.androidfilehost.com/?w=files&flid=41020
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Source:
Kernel: https://github.com/CM-Tab-S/android_kernel_samsung_klimtwifi
Source: https://github.com/DarkExistence/android_device_samsung_chagallwifi/tree/CM-13
Credits:
@deadman96385 (For helping along the way, Providing the kernel and the manifest)
@Prophentes (For helping along the way)
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits - the base @Barracuda77777 and @nvertigo67 started of from)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
Please Donate
If you like my ROMs please donate by pressing the "Donate to Me" button below my name on the left side. Building ROM's aint easy and this particular one took me around 4 days to build due to countless issues! Everything is appreciated and of course you dont have to!
Known Bugs
DRM content in Google Play Movies does not play
Mic is quiet
Camera Doesn't Open
No FP Scanner
Now On Tap
Reserved
Thanks ill test right now!
OMG i was wainting for this for a long time. When more of the bugs are fixed i will install it. Great work!!!!!!!!!
Enviado desde mi SM-T800 mediante Tapatalk
ciberworm said:
OMG i was wainting for this for a long time. When more of the bugs are fixed i will install it. Great work!!!!!!!!!
Enviado desde mi SM-T800 mediante Tapatalk
Click to expand...
Click to collapse
The bugs which I see at the moment aren't actually that bad. Unless you can't live without the camera on your tab s or now on tap then lag is nearly non existant and I have been testing for a few days
DarkExistence said:
The bugs which I see at the moment aren't actually that bad. Unless you can't live without the camera on your tab s or now on tap then lag is nearly non existant and I have been testing for a few days
Click to expand...
Click to collapse
Just wondering were you planning to fix the fingerprint and or camera thing ? I have been waiting for this for a bit as well , and would like to to know if I should just wait untill that time to install this. ty
DBCAB said:
Just wondering were you planning to fix the fingerprint and or camera thing ? I have been waiting for this for a bit as well , and would like to to know if I should just wait untill that time to install this. ty
Click to expand...
Click to collapse
CM changed the way the fingerprint sensor worked in a recent update so we are trying to find out how to get it working but we will do it asap. As for the camera, trying to figure it out but when it fixes ill post an update . Planning to do weekly updates if I have time (coming up to exams). Have you installed the ROM? What do you think so far if you have Feedback is great
Downloading now!
Sent from my SM-T800 using Tapatalk
localceleb said:
Downloading now!
Sent from my SM-T800 using Tapatalk
Click to expand...
Click to collapse
Awesome! Let me now know how it is!
DarkExistence said:
CM changed the way the fingerprint sensor worked in a recent update so we are trying to find out how to get it working but we will do it asap. As for the camera, trying to figure it out but when it fixes ill post an update . Planning to do weekly updates if I have time (coming up to exams). Have you installed the ROM? What do you think so far if you have Feedback is great
Click to expand...
Click to collapse
wow just installed runs silky smooth will monitor battery life etc and provide more feedback as I use this more , very nice rom tyvm.
installed with no issues, it seems very nice. is there an option somewhere for an on screen navigation bar? i can't find build.prop either to add it in myself manually
edit: found build prop but qemu.hw.mainkeys=0 doesn't seem to have worked
edit 2: never mind, it worked after all
Rooted my Tab S for the first time and am running this rom. It was the rom I was able to successfully add the nav bar and disable the capacitive buttons without an issue. So far so good.
rey_1178 said:
Rooted my Tab S for the first time and am running this rom. It was the rom I was able to successfully add the nav bar and disable the capacitive buttons without an issue. So far so good.
Click to expand...
Click to collapse
How did you do this, if you dont mind me asking? Successfully add the nav bar and disable the capacitive buttons.
Glad that people are finding it runs silky smooth! Im hoping to do weeklies so there should be another one up next wednesday (If I have time ;-; Exams ;-; )
Installed this last night. Very easy and runs very good. Props!
I'm dual booting my T800 with Schischu's Android 6 ROM. He's managed to fix the camera and fingerprint reader problems.?
Sent from my SM-T800 using Tapatalk
biffenli said:
How did you do this, if you dont mind me asking? Successfully add the nav bar and disable the capacitive buttons.
Click to expand...
Click to collapse
Sure I can share. First make sure you have root file manager like root explorer or the root browser in rom toolbox.
To enable the navigation bar
Open "/system/build.prop" and add this line at the bottom of the file.
Code:
qemu.hw.mainkeys=0
Hit save.
BEFORE THE NEXT STEP PLEASE REBOOT NOW TO MAKE SURE THE NAVIGATION BAR SHOWS UP.
After you've confirmed the navigation bar is enabled, open up root file manager.
To disable the capacitve buttons;
Open "system/usr/keylayout/sec_touchkey.kl"
If you're asked to open the file as, choose text. Add a pound sign # in front of the 158 and 254 keys like this;
Code:
# key 158 BACK
# key 254 APP_SWITCH
Hit save. Reboot and now the back and app switch buttons should do nothing. They will still light up so turn that off in the settings menu.
I left the home button enabled as this is a button you really have to push unlike the capacitive buttons. Also I don't know if it would affect the finger swipe feature for unlocking the device.
If you would still want the home button disabled open the file "system/usr/keylayout/Generic.kl" and look for key 172 and add # in front like this ;
Code:
# key 172 HOME
That's it.
Here's video of it : https://www.youtube.com/watch?v=qWXEDLVJn10
Here are pics :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rey_1178 said:
Sure I can share. First make sure you have root file manager like root explorer or the root browser in rom toolbox.
To enable the navigation bar
Open "/system/build.prop" and add this line at the bottom of the file.
Code:
qemu.hw.mainkeys=0
Hit save.
BEFORE THE NEXT STEP PLEASE REBOOT NOW TO MAKE SURE THE NAVIGATION BAR SHOWS UP.
After you've confirmed the navigation bar is enabled, open up root file manager.
To disable the capacitve buttons;
Open "system/usr/keylayout/sec_touchkey.kl"
If you're asked to open the file as, choose text. Add a pound sign # in front of the 158 and 254 keys like this;
Code:
# key 158 BACK
# key 254 APP_SWITCH
Hit save. Reboot and now the back and app switch buttons should do nothing. They will still light up so turn that off in the settings menu.
I left the home button enabled as this is a button you really have to push unlike the capacitive buttons. Also I don't know if it would affect the finger swipe feature for unlocking the device.
If you would still want the home button disabled open the file "system/usr/keylayout/Generic.kl" and look for key 172 and add # in front like this ;
Code:
# key 172 HOME
That's it.
Here's video of it : https://www.youtube.com/watch?v=qWXEDLVJn10
Here are pics :
View attachment 3759079View attachment 3759080View attachment 3759081
Click to expand...
Click to collapse
Huge thanks mate!
Works pretty smooth so far..
I enabled the soft keys like above, but is there any way to get it to auto-hide, like on the nexus?
Hi,
Im experiencing a few issues and not sure if its related to this ROM or not.
Samsung Galaxy Tab S T-800
1 - I cannot see any 5ghz wifi connections any longer.
2 - my 2.4ghz wifi connections intermittently drop out for no reason, i.e. i could be playing a game and it will just drop the wifi connection and reconnect 20-30 seconds later.
3 - Not sure if related but the game Hearthstone (Blizzard) does not open for me any longer, it will crash almost instantly with an error.
4 - The home screen usable space has significantly reduced (possible launcher/setting issue, will get a picture for this)
I will mention here that none of the above were an issue prior to flashing from stock/factory.
Related
***ATTENTION IF YOU ARE COMING FROM A 4349+ STOCK ROM or MOD based off that PLEASE VISIT THE FOLLOWING LINK TO DOWNGRADE YOUR BOOTLOADER AND TNT VERSION BEFORE FLASHING CWM AND THIS OR ANY OTHER ROM****
http://forum.xda-developers.com/showthread.php?t=1036956
LINK TO NEWEST DEVELOPMENT: VEGAn-TAB GINGEREDITION: http://forum.xda-developers.com/showthread.php?t=1031250
VEGAn 1.00 beta 5.1.1 supplement - Thanks Roebeet for staying on top of it!
Link: http://www.mediafire.com/?jhq1cnu5wgkg3j5
md5sum: 7f3920a3ef2dabf264bfc8550d8f6d00
List of fixes / enhancements in this supplement:
- Maps 5.1 with the rotation fix
- Market 2.2.11
- Updated drivers that should bump up Quadrant slightly, and significantly improves Nenamark scores
- Frame rate change from 50 to 60
- Replaced the Froyo keyboard with the Gingerbread keyboard
- Added Adam Sniffer app, and their keyboard as an option
Quick instructions: This is a supplement, not a full firmware. You would run this like any other update.zip, but since the changes are small you shouldn't have to wipe data. You'd want beta 5.1 as your baseline, before running this, download link is further below for the full install of beta 5.1.
I know that the VEGAn users probably haven't been "feeling the love" the last few weeks, so we wanted to at least bump you up to some of the latest changes ported to TNTL. I have been plugging away hard on CM7 and VEGAn-TAB GingerEdition and rothnic's expertise with a lot of the these enhancements are the reason why they exist right now. The Nenamark bump actually originated from our Adam testing, believe it or not.
As Per usual USE THIS ROM AT YOUR OWN RISK. We highly recommend clockworkmod recovery as a pre-req. We are only testing for cwm users.
I would also recommend a full data wipe between updates, at least for now when we reach STABLE RELEASE stage this may not be always necessary. There is a great tool out there you can use if you don't know about it already called Titanium Backup it is on the market and there is a free version. It allows you to backup/restore all your apps and even save/restore data for those apps... the only caveat I will say is do not restore any system apps (ie. apps preloaded with our roms) this can cause issues.
****The First Boot after installing BETA 5.1 will take a few minutes to catch up and will feel "laggy" this depends on how much media you have on your device for it to scan in the first time****
**If you are having issues with the new market telling you you don't have enough space to download then your SD Partitions are incorrect and need fixed** -Boot Clockworkmod, select advanded, then partition SD, 2048 for first option, and 0 for second. process will take ~10 mins ******WARNING THIS WILL DELETE EVERYTING ON SDCARD (internal) MAKE A BACKUP!!!!******
Now that we are nearing a STABLE Release here are some new links you may not be aware of:
Build URL: http://vegantab.gojimi.com/
Downloads section: http://vegantab.gojimi.com/downloads
ON TO THE ROM:
***UPDATE***
1.0.0 Beta5.1 Link: http://vegantab.gojimi.com/download/gtab.VEGAn.1.00.beta5.1.user.final.zip
md5sum: a01171d77f25444088ecc884c793d105
This is an update.zip formatted file. You'd run this like you'd run any other update.zip file.
-----------------------------------------------
ONLY DO THIS IF YOU DO NOT CARE ABOUT G-SENSOR BEING RIGHT FOR MOST G-SENSOR GAMES & WOULD RATHER HAVE MOUSE SUPPORT BACK -- *****PATCH TO REMOVE G-SENSOR FIX AND RESTORE MOUSE SUPPORT***** - ONLY INSTALL THIS AFTER BETA 5: http://vegantab.gojimi.com/download/patch.VEGAn.BETA5.remove.Gsensor.zip **Flash this like you do the roms in clockwork**
This is a collaboration between myself, Roebeet, and Rothnic - The G-TabDevs Team.
BETA 5 changes:
* NEW KERNEL **Thank you Rothnic** We have compiled alot of new features in to this with more on it’s way at some point.
* LAG on WAKE FIX! woo hoo! no more laggy tablet after sleeping.
* CIFS support (allows mounting shared folders over a network) – search CIFS in the android market for apps
* NTFS support (this gives us the ability to mount drives formatted NTFS which is popular on Windows machines…. Larger File Support)
* Ethernet on DOCK Support (This will only work right now if the device is booted while connected to the dock to activate the port)
* ***UPDATED EVEN BETTER****G-Sensor Fix (this has been long awaited by many! Fixes most games that use the g-sensor for controls, etc.) **this is a DIRTY FIX but it works… only issue is it does mess up mouse usage… so if you are a mouse user and don’t care about the g-sensor being right for games there is a patch below that you can apply ***AFTER*** you install BETA 5.
* REBOOT OPTION has now been added to the power menu. Remember that popup menu is a scrollable menu so if you don’t see it all use your finger and scroll on down!
* I increased the DELAY for the LONGPRESS Power button to bring up the menu… it is now a full second. This has dramatically decreased the number of time the power menu has accidentally popped up when trying to wake the device.
* Added the Tablet Compatible Stock Calendar that I dropped on you guys at Christmas on the Website.
No Major theme changes, nor some of the other fixes that I have been having issues with. The next release should include those. This is the LAST BETA I believe. The next release will take some time so settle in for a bit while we work on Release Candidate 1.
-------------------------------------------------------------------
Benefits to us
- Soft buttons, like TnT. But no TnT UI layer getting in our way. So, for example, keyboard replacements should work.
- Just as fast as the new builds we have if not FASTER.
- Vega build has a bootup script where we can install user-based apks, after a data wipe. So, for example, Flash is now added to the build.
- Vega firmware development is probably more active than the official TnT development, at least from the little I've seen so far (though TnT have been fairly active lately).
Known issues
- Videos are not being automatically scanned on the EXTERNAL SDCARD.
*****FIXED**** Weird orange bar is showing up in the stock Calendar app *****FIXED****
- The newest Market apk seems to have issues with any device that's been re-partitioned outside of the default of 2048. The "fix" is to re-partition your SD back to the default of 2048, in clockworkmod. Thanks to proengin for informing us of this.
Changelog
- (a2) We are using alpha1 as our "base" image, and then a modular format on top of that. So, alpha2 is a full update.zip package.
- (a2) VOLD should be fixed using a hack. 30 seconds after bootup, SDCARD2 should start working. Or, it may not work. It's an alpha.
- (a2) Vega user apk script has been added, which is supposed to add Flash on a newly wiped system. But it's spotty at best.
- (a2) Camera should be fixed.
- (a2) We're deleting some of the unneeded system apps like Twitter, Facebook, the Htc stuff in gapps and talkback. You can always add these back via the Market. The reason is to keep the image a little cleaner.
- (a2) Audio fix added.
- (a3) Added changes to the framework for smaller status bar and VEGAn boot screen.
- (a3) Added Gingerbread keyboard.
- (b1) SSL bug fixed. Also, added the latest YouTube and Gmail apps. Removed the user apk script for now, as it's really buggy.
- (b2) VOLD post-boot replaced with a mount commend. Should be more stable and might fix the disappearing apps, I hope. New Gmail, adhoc wireless support added, adfree hosts file removed (get "adfree android" app in the market to get it back), removed the Phone apks which should improve battery life.
- (b3) Mounting issues should be completely corrected, audio issues are corrected, new rothnic theme added, new Gmail and Voice apps, new Settings app with advanced Wifi (and policy is set to "never sleep" by default).
- (b4) A New Cleaner Base System Image with the addition of files from new Advent Vega Release (we can finally get rid of the hacked together Image That I originally created for VEGAn)
- (b4) New Kernel (from latest unreleased TNT Update kernel version #15)
- (b4) New Boot Logo(replaces G-Tablet on white background)
- (b4) New VOLD Binary and MediaProvider(allows media to be seen from External SD Card as well as internal)(videos are not being automatically found on SDCARD2 ATM I am working on that)
- (b4) Settings app no longer has Call Settings option or mobile networks as it is not a phone
- (b4) New Market (We have got it showing even more apps... but still not all. Still need to do the market hack.)
- (b4) Some Graphics and Performance Improvements reduces video tearing issue among other improvements (G-TabDevs Performance Pack)
- (b4) New Music Player(pulled the one from CM6.1 and got it running on VEGAn)
- (b4) framework laid for bluetooth HID(not sure if it is fully functional yet please let us know if it work for you)
- (b4) laid the framework for POSSIBLE OPENVPN support(not fully functional yet sure if I can get it to work yet)
- (b4) New Theme Improvements - Switched to a more Cyan color highlights (the previous green may be available as a small update at a later date.
- (b4) Flash now auto installs on first boot up usually after about 15 secs so the tablet can finish booting
1.0.0 Beta 5:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
------------------------------------------------------------------
Archives:
1.0.0 Beta3 Link: http://www.mediafire.com/?tt3n3njojetnscx
Alternate link: http://www.megaupload.com/?d=3KJ799TZ
md5sum: fea915609ab56aa233fabcfff3bcc2a3
1.0.0 Beta2 Link: http://www.mediafire.com/?c9a1c11zz1wgza9
Alternate link: http://www.megaupload.com/?d=MKKNTZP1
md5sum: 1b16d0cf7f02702a6796914195d8339b
1.0.0 Beta1 Link: http://www.mediafire.com/?5hr09gj53ut1208
Alternate link: http://www.megaupload.com/?d=Y9NR34AD
md5sum: 2906ed4fd5ae4fc1954b7b5e766f1507
1.0.0 Alpha3 Link: http://www.mediafire.com/?tzhc7vtstdl128x
Alternate link: http://www.megaupload.com/?d=9SPCOMPY
md5sum: 148a7bf52458cbedc9d859e91281a6c8
1.0.0 Alpha2 Link: http://www.mediafire.com/?bdurosaclrp4r3i
Alternate link: http://www.megaupload.com/?d=H264QQRH
md5sum: 2541fccfb01fb8b398fc38beaa5b3355
1.0.0 Alpha1 : http://forum.xda-developers.com/show...5&postcount=57
Stuck thread
I hope you have a lot of bandwidth on that server, gojimi, because you're about to get hammered. Might want to consider uploading through multiupload.com, the service roebeet's been using.
Downloading and getting ready to flash here, btw.
Downloading now! thanks for all the fast updates!!
Thanks for the hard work!!!!!! Downloading now
Ahh! didnot bring Gtab to work !
Will D/L after work.
Thank you Santa Clause ('s)
LOL.
And I just got done loading up the new latest VS ROM. It's much better, but it still ain't Vegan.
Oh well, I got no problem swapping out ROMS. Thanks for the hard work guys.
Thank You!!Just updated then did the TnT Kb + Live WP + Gapps..Formatted SD 2048 / 0 ..Did Market Fix and Im In....
Love the new Image instead of the gtab image.....
Can't decide on the bios or this boot logo..
Quadrant 2463
Thanks Again!!
looking sexy downloading now!!!
Is there any way to have the Home button bring up the launcher instead of the Clock app? Or am I experiencing a unique issue?
HID Testing
How do I enable the bluetooth HID? I am trying to connect to my keyboard, but I don't see any option for it?
It does bring up the generic message to try "0000" or "1234" however it did not work, or do I mis understand? is this something I need to do at the command line hidd --connect etc?
Everything else seems to work great, at least what I have tested.
Thanks !
Wiped everything before install. Runs well, but noticed a few issues.
First, my power button stopped putting the device to sleep. I could hold and get the shutdown menu. Reboot fixed this.
Second, if you use the lock screen feature and try to log in before the device finishes starting up (after a power on or reboot) the touchscreen becomes unresponsive. You have to hold down the power button for 10 seconds to force shutdown. Noticed this with beta 3 as well.
Third, hacked TSCalibration doesn't appear to be proloaded to find INI file on root of /sdcard instead of /sdcard2.
Seems great other than that!
So far so good! Wiped data, cache, and dalvik then installed. Got TB and restored my Pro license, then selected apps with data (no system data) to restore. Entered in Gmail account, tested Market. Applied Swype install/hack and rebooted. Running smooth, Quadrant in the 2400+ range.
The only problem I have is I can't sync my Facebook account under Accounts. I don't need this per se, but I'd like to have them.
-=Sent from my Droid 2 (Fission 2.4.3) using Tapatalk=-
schauerd said:
How do I enable the bluetooth HID? I am trying to connect to my keyboard, but I don't see any option for it?
It does bring up the generic message to try "0000" or "1234" however it did not work, or do I mis understand? is this something I need to do at the command line hidd --connect etc?
Everything else seems to work great, at least what I have tested.
Thanks !
Click to expand...
Click to collapse
I wasn't totally sure I had bluetooth HID licked this round or not... I don't have a bluetooth keyboard to test with... looks like we are part way there maybe by the next build we'll have a better understanding of what needs done.
ehunyadi said:
Is there any way to have the Home button bring up the launcher instead of the Clock app? Or am I experiencing a unique issue?
Click to expand...
Click to collapse
Ehunyadi: you are one of only two people experiencing this issue. I would like to know what the model number of your tablet is. On the back starts with UPC3*** etc. It seems this may be linked to a specific run of devices but we are not sure. Let me know so I can track down the root cause of this.
gojimi said:
Ehunyadi: you are one of only two people experiencing this issue. I would like to know what the model number of your tablet is. On the back starts with UPC3*** etc. It seems this may be linked to a specific run of devices but we are not sure. Let me know so I can track down the root cause of this.
Click to expand...
Click to collapse
Model: UPC300-2.2
ehunyadi said:
Model: UPC300-2.2
Click to expand...
Click to collapse
I have the same model number and my home buttons work fine.
Thanks for the response !
ehunyadi said:
Model: UPC300-2.2
Click to expand...
Click to collapse
Now that's weird... I guess it is not model specific then... It seems like something is telling it the tablet is docked when it clearly is not. Just to clarify did you do a full data/cache wipe in Clockwork Mod after installing BETA 4?
Just trying to run through the troubleshoot list.
Was loudness increased? Seems louder. Also seems a tad quicker.
*Photo by jzen*
First and foremost there is a huge amount of credit that goes to Cyanogen(mod) for getting us Android booting up on the Touchpad. There are some small tweaks made to it to give a speed boost.
For those having issues with wifi, please click HEREor HERE for information regarding the HP Touchpad connectivity issues. PLEASE DON"T COMMENT IN THREAD OVER ALREADY KNOWN ISSUES...
Please read this page before you decide to ask a questions in the thread. While we are all willing to help, please understand that it may have been asked many times before. READ HERE
LINK
This is debloated and fast...
Changelog 1/3/2012
* Fixed Browser install
* Fixed Terminal install
* Fixed HP Printer app
* Fixed Quickpic
* Added Sportscaster (cool tablet app)
* Added ICS Launcher
* Added weather widget
* Updated all apps in Market
* This is a system pull from my touchpad with everything working. If anything doesn't work please report so we can address them. This is slightly bloated but look at reverendkjr's YouTube video in post 2 for a how to uninstall.
If you are coming from vB2.9 deodex, you simply wipe cache and dalvik, flash and reboot.
If you are coming from Odex you have two options.
* Factory reset and wipe cache/dalvik, reboot recovery and flash rom. Preferred.
or
* Using root explorer app, goto system/app and delete the browser odex and terminal odex files then you can wipe cache/dalvik, reboot recovery, and flash ROM.
It's known that the system may reboot a couple times after you set it up. Let it settle in and the reboots should stop. It's still organizing the system some. If it continues, please report it.
This is smooth as butta.....
Changelog 1/1/2012
You must factory reset and wipe all for vB2.9. Too many edits to flash on top. Also, its best to reinstall apps one by one not use backup for optimal experience. The more you wipe, the better you will be. Reboot after you set up to activate the sq mods.
Changelog 12/25/2011
* This has bloat. either deal with it, or don't download...please don't ask anymore how to debloat. This has been covered many many times.
* For some, after you set up gmail, market app icon will apear, if not, reboot and should take care of it.
* Odex app (allows you to odex it yourself)
* Google Music built for the tablet
* ICS google search
* Syndicate ICS launcher (additional)
* DolphinHD Browser
* Wifi Buddy and wifi toggle widget
* Removed Stock Browser
* Remove Gallary3D replace with Quickpic
* Odexed now
* ICS menu soft keys (stock sdk)
* Different keyboard (blue and better in my oppinion)
* New battery icons (thanks to HO!NO! CM7 rom)
(also thanks to jbird for pointing this rom out to me, team syndicate for making a sweet rom)
* Zipalign system, data, and framework on boot FINALLY!
* Increased Net buffer tweaks
* Read ahead sets to 3072
* Moved Dalvik-cache to /cache now on boot
* Updated all apks
* Market 3.4.4
* Internet Speed Tweaks
* Disabled IO Stats
* Defrags database files
* ICS Nexus bootanimation
* Tweak build.prop
* Added File Manager to support apps in system
* Tweaked media.profile more for better response
* 1% battery mod (thanks hurtz777)
* Flashable thru recovery now
* Fix SOD issue
* Default allow unknown apps to install
* Opted pngs
**Huge props to MiSfit for helping me understand and getting these tweaks working right.
Screen Shots belows
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Special Thanks
==================================================================================================
To all those who donate Thank you!, CM team, TMartin, Myn, Virus, Misfit, tommytomatoe, dalgarin, hurtz777, ickna11, Chubbzlou, zone23, Team Syndicate, jzen
==================================================================================================
For those who choose to continue and use this fine ROM, its at your risk. It has been tested over and over.
There has been an over whelming amound of emails, PM, requesting the link to be brought back. So now that you have it, enjoy it please. Just remember, tons of hours were invested.
For those who would like to donate, it's greatly appreciated. if you don't, hit the thanks button. well over 35,000 downloads happened in a couple short weeks so we know it's popular. I love my TP and will continue to work on this. Just remember, if you are here to complain about why I included Apps you don't use, move on! If you are here to b*tch, move on! If you are here to help, you are welcome to stay for the long haul
MD5 Matches and Installation instructions
vB2.9.1 ODEX MD5 a4215ee386e41bebfa3275eaf3615b50
vB2.9 MD5 efeaf1ef30d449c51c8b4ddec3197f7e
vB2.8 Odexed(bloat) MD5 a847b65681be7c938ae3c891d25bc689
vB2.7 Odexed MD5 5a8a79fdff580886658d96e356837039
vB2.6 Debloated MD5 332106236cfe0dde197079e51d60e081
vB2.5 MD5 af46f82032570bc7209f2b0205bcf46f
vB2.2. MD5 32515d750cd9bcd8a1f80550b28e48f8
vB2.1 MD5 bbb1276a71e3c3cfaecda4098dc66f76
vB2 MD5 e60b94c2a47ce420fff255f4c01b94db
vB1.3 MD5 a0ba756a7d1b975f92bab04aab889926
vB1.2 MD5 03133cd42a35a8d14b56acace3188bd5
vB1.1 MD5 1ae6f193cdd5bc01e90be3551b326c4c
vB1.0 MD5 ba668ff0406abee58a818655c9599284
v3.3.2 MD5 ec248f582a3ba2b092274781d5174d8a
v3.3.1 MD5 5b736410e76d8653b43849b3da7b9160
v3.3 MD5 80f9c448f0b9dd78c8243312b68b3f15
Thanks to Krunk for making a very nice Q&A section. Please refer to this before asking any questions that may be covered by his thread found HERE
Video from our favorite YouTube specialist...Reverendkjr
Video how to remove bloat from specialist....Reverandkjr
Installation instructions:
1) Download the latest version either on your Touchpad or computer
2) If you already have CM7 or XRONified installed, place the above zip on the root directory of your Touchpad
3) Reboot in to recovery
4) Wipe cache AND dalvik cache (under advanced menu option)
5) Flash zip. (if you are coming from CM7 you MUST wipe factory reset/cache/dalvik first)
If you do not have Android on your Touchpad you will need to do this.
1) Make sure you have novacom drivers installed on your computer
2) Download the ROM of your choosing and rename to update-cm-xronified.zip
3) Boot your Touchpad in to webOS and mount the USB port
4) Create a folder called cminstall (do not capitalize0
5) Put moboot 0.3.5 inside cmintall folder (Download HERE)
6) put update-cwm-tenderloin-1012.zip inside cminstall folder
7) Place the renamed ROM inside cminstall folder
8) Download ACMEInstaller and ACMEUninstaller from HERE
9) unmount USB and reboot, hold volume up key and power button at the same time until it gets to bootloader mode (USB symbol)
10) go to where you have your novacom drivers and folder (usually c://program files (x86)/HP webOS/SDK/bin and open command window by holding yoru shift key and right click in that window, select open command window here option.
11) type the following at the command prompt
novacom boot mem:// < ACMEInstaller
It will install the latest ROM via acmeinstaller...
Please read and use this method before you PM me or flood the thread with how to install questions.
Thanks,
~leo
Edit.
link to clear out moboot menu
Flash this link to clear moboot ics and cyanogenmod option...
Here is the link to method2madness YouTube video
You Tube SPB 3d Shell LINK
Thank him plenty for putting this up there...
I will definitely give this a try. Are you the same guy doing work over in 3VO? You devs make it hard for me to kick my flash habit
Downloading now.
*Edit* dead battery.
Sent from my Nexus S 4G using XDA App
tsalate said:
I will definitely give this a try. Are you the same guy doing work over in 3VO? You devs make it hard for me to kick my flash habit
Click to expand...
Click to collapse
HAHA, thanks man...Yup, the same one.
Awesome. I'll definately flash this tomorrow. Thanks!
Sent from my HTC ThunderBolt using Tapatalk
Flashed it, wifi is pwnt, and the animation screen is kind of cheesy. Flashing back to CM2.1.
Thanks for the try though.
Wi-fi problem still exists for me...
*edit* ...tried wi-fi with encryption; no go, and with out encryption...no go. Tried shortening the host name- no go. Tried all of the work-arounds posted and wi-fi still will not connect.
Sent from my PG86100 using XDA Premium App
Same issue. Won't connect to WIFI. Looks good however. Going to let it sit and see if I get SOD.
Sent from my PURE MATR1X Nexus S 4G using XDA app.
After sitting for over an hour...still doesn't connect. Sucks for me because I was so sure this was it that I didn't Nand Bluetooth's still an issue as well.
Sent from my PG86100 using XDA Premium
Code:
This has been tested many times with out issues
same here. WI-FI does not work and i have installed complete new with this rom.
And Superuser does not work? I have installed Root Explorer and have no access to the Filesystem.
No SOD after 5 hours of sitting with screen off.
Sent from my PURE MATR1X Nexus S 4G using XDA app.
biggboii said:
After sitting for over an hour...still doesn't connect. Sucks for me because I was so sure this was it that I didn't Nand Bluetooth's still an issue as well.
Sent from my PG86100 using XDA Premium
Click to expand...
Click to collapse
Found the issue. Uploading the fixed one now. Sorry about that gang.
Edit: I think the issues with this are the symlinking. After testing it again last night, it seems to have fixed the WiFi and super user issues.
As far as the bootanimation, replace it...lol. pretty easy fix.
Sod issue, really sounds like its an issue with your particular touchpad. Suggestion would be to go in to webOS and delete everything and restore it back to factory then move forward trying this again.
Bluetooth seems to be a hit and miss with the alpha version. One minute I connect, the next it won't read the computer or vice versa so hope to start nailing this down.
And reflex, this has been tested many times. A quick change to the updater script may have caused the WiFi issue. Its all good now.
Thanks for the quick feedback and looks to be good moving forward.
Sent from my PG86100 using Tapatalk
got some screenshots?
Ok, link has been updated to correct wifi and superuser.
Stroid01 said:
got some screenshots?
Click to expand...
Click to collapse
check the 3rd post. I will get more up later tonight.
Looks ok, wouldn't mind using as an every day, of course until the next CM update, but wifi doesn't connect. Tried rebooting several times, but no go. Doesn't seem to be able to obtain my ip. Going back to CM alpha.
EDIT:
Wifi is working. I may have downloaded the old file right before it was replaced.
Thanks for this
Good to see you over here, too, Leo. I'm happy to see the TP is getting a little dev lovin', too.
crs77 said:
Looks ok, wouldn't mind using as an every day, of course until the next CM update, but wifi doesn't connect. Tried rebooting several times, but no go. Doesn't seem to be able to obtain my ip. Going back to CM alpha.
EDIT:
Wifi is working. I may have downloaded the old file right before it was replaced.
Thanks for this
Click to expand...
Click to collapse
Sweet. Of there are any updates with cm, I will be keeping this updated as well. Also, talked to MYN, and he's ready to jump on board with me.
Sent from my PG86100 using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This ROM is a combination of all Super ROMs Available
Paranoid + AOKP+ Cyanogen = SCHIZOID
SCHIZOID is based on AOSP+CM source codes, stock kernel, and has all
the stability of CM, the ROM control of AOKP, and the UI customization of PA..
FEATURES
FULLY compiled from source with custom kernel.
Hardware Acceleration
Color-splash for nav-bar and apps!
Backup and Restore of PA settings
Expanded Desktop
AOKP ROM Control
Latest Android gesture (swype-like) keyboard
LMT Pie Control Launcher in Settings
Battery Statistics
Current with CM10 repo
Contains all features of CM10 and PA 2.55 and some of AOKP
Why Choose When You Can Have It All-In-One !!
SCREENSHOTS
[
INSTRUCTIONS TO FLASH
- Make A Backup
- First time users only: If you're currently running a non-CM10 ROM, do a full wipe (factory reset & system)
- Wipe cache and dalvik
- Flash ROM And Gapps
- Reboot
USER NOTES/BUGS
Everything works including camera, gyroscope, sound, accelerometer, battery stats, etc.!
You should expect conflicts between the various ROM controls, especially the UI controls between AOKP and PA.
For first time users after bootup:
Settings > System > Navigation Bar >Tablet UI soft buttons, check
Settings > Rom Control > General UI > Show Menu UI Overflow (otherwise there is no way to enable MTP, open browser settings, wifi settings, etc)
Settings > Storage> Menu (three-buttons at top right)-> USB Computer Connection > Media device (check MTP)to make sure your TP usb charges properly. I had to go into portrait to see the three buttons. It should already be checked
To get softkey buttons in navbar, go to Settings->System->Navigation bar->Tablet UI soft buttons (check)
AOKP tablet UI setting overrides PA's.
To set phablet or phone mode, first uncheck AOKP's setting:
Settings->ROM Control->General UI->Force Tablet UI
then
Launch option at Settings->Paranoid Settings, pick your UI
Use the Pie Launcher in phone mode
PA UI reboots may shutdown or hang. Just reboot, i.e. hold power key to restart if shutdown, power and menu keys if hung.
tbob's WebOS Switcher app works.Updated WebCM10 for Schizoid 01/12/13 but you will have to reconfigure the systemui.apk each time you change modes.
LMT Pie Control in settings allows PA 2.99-like pie launcher (with permission noname81)
Using the Touchstone charger is funky. If you have problems with the tablet not charging, go to Settings > Storage > Menu (three-buttons at top right)-> USB Computer Connection > Media device (MTP), disable MTP, enable camera mode, then re-enable MTP. This also works with usb charging problems.
If you don't want my SCHIZOID bootanimation, get AFAinHD's Beautiful Boot! here..
Complete guide to ParanoidAndroid Preferences
Guide to AOKP ROMControl
Pie Control Tutorial
Tell me!
Roll Your Own ROM
SCHIZOID Build Instructions
Click to expand...
Click to collapse
Download Link
SCHIZOID 06MAR: Latest Build Link
FOR TESTING ONLY!!! If you want the overclocked kernel, Read this post first. Download and flash the OC'd kernel from there
Mirrors:
http://www.filefactory.com/file/5nrreg41zalx/n/skz_tenderloin-1_20_jb-06MAR2013-jcsullins-220954_zip
Gapps: http://goo.im/gapps/gapps-jb-20121011-signed.zip
CREDITS
CM, PAC, AOKP and PA Team Members
-SGA- for lots of encouragement and help
tbob for his work in fixing the ParanoidPreferences application
nicsptl for his work in porting camera
and power fixes
jcsullins for his continuing support to us troglodytes
Dorregaryfor his work on improving the device capabilities
noname81 for his LMT Pie Launcher
mateorod who has been my mentor.
CHANGELOG
Code:
-> 19MAR2013
- Kernel recompiled with up to 2157MHz overclocking frequencies,
and more efficient SHA1 encryption algorithms to reduce boot time.
- Merge upstream
-> 06MAR2013
- Recompiled with jcsullins wifi and standby power fixes
- Merge upstream
-> 04MAR2013
- Fixed PA modes
-> 18FEB2013
- add line to build.prop to enable MTP on boot
- update skz power_profile.xml with some of Dorregary's parameters
- add Dorregary's sensor mod's to forked tenderloin device source
- apply Dorregary's sensor mod to stock kernel
-> 11FEB2013
- hide LMT Pie Control in drawer to prevent inadvertent uninstall
- apply urandom entropy mod to stock kernel
-> 09FEB2013
- provide LMT Pie Control in Settings
-> 07FEB2013
- Include LMT1.9 as pre-installed pie control
- Change default images to skz
- Merge upstream
-> 01FEB2013
- Fixed battery statistics display in Settings->Battery
- Merge upstream
-> 22JAN2013
- Fixed ParanoidPreferences and Performance Control applications.
- Merge upstream.
-> 12Jan2013 Revisions to paranoid preferences to stop systemUI FC
-> 10Jan2013
- Fully functional ROMControl package app
- Added init.d script to create frequency table in /data/local
- Power draw in standby fixed
-> 09Jan2013 Modified ROMControl package fix setting of CPU frequencies
-> 07Jan2013 Fully compiled code with working camera and Android gesture keyboard.
-> 14Dec2012 Add link to ported camera ROM (Many thanks to [URL="http://forum.xda-developers.com/member.php?u=4444163"]nicsptl[/URL]
-> 13Dec2012 Faulty compiled ROM removed. Previous good port restored
-> [COLOR="Silver"]12Dec2012 Fully compiled from sources. Merge with ParanoidAndroid. Miscellaneous bug fixes[/COLOR]
-> 10Dec2012: Add flashable custom bootanimation download
-> 03Dec2012: Replace DeskClock.apk with working apk to stop FC's
-> 02Dec2012: Initial upload
Way too cool! I am gonna try this asap!
Also, you should set up a donations button
Sent from my SAMSUNG-SGH-T989 using xda premium
Awesome bro... more roms... thank you guys for your hard work... Im downloading it
Sent from my cm_tenderloin using XDA Premium HD app
Very interesting! Downloading now. I'll report in later.
Thank you!
For someone who just a little over a month ago said "I'm just a furniture mover", you've certainly come a long way in development.. Thanks for keeping it exciting to own a TP. Nexus 10...what's that?
Mike T
Is wifi pretty solid on here? I'm still having a little bit of wifi issues.
Mine is as good as it's ever been, if not better.
Sent from my skz_tenderloin using XDA Premium App
Btw guys how to I enable the on screen keys(IE the back, home and menu button on the lower left hand corner)?
Wow, awesome! Works great so far.
Edit: The way the app switcher works in tablet mode is more like 4.1, not like in PA/4.2.. I don't think I'll be able to port WebCM10 for now.
islubio said:
Btw guys how to I enable the on screen keys(IE the back, home and menu button on the lower left hand corner)?
Click to expand...
Click to collapse
Go into Paranoid settings and convert System UI from Phablet to Tablet UI.
Then, go into AOKP settings and enable "Force Tablet UI" to enable the on-screen buttons.
(At least that's what I did.)
tbob18 said:
Wow, awesome! Works great so far.
Edit: The way the app switcher works in tablet mode is more like 4.1, not like in PA/4.2.. I don't think I'll be able to port WebCM10 for now.
Click to expand...
Click to collapse
I was afraid of that, but I suspect it will be different when it's fully compiled.
shumash said:
I was afraid of that, but I suspect it will be different when it's fully compiled.
Click to expand...
Click to collapse
Cool, well maybe the next version.. It'd be possible to port, but probably more trouble than it's worth and portrait would be broken again. I'd guess it has to do with some of the AOKP bits in there.
Updated ROM and OP
The OP link has updated info. and a link that fixes the clock FC's. If you don't want to reflash, you can copy the DeskClock.apk from a working ROM (I used PA 2.99, but jcsullins CM10 should work) and replace the one in system/app. Reboot and the FC's are gone.
how did you manage to have transparent status bar/nav bar? When I try to set the color of the status bar, there are no buttons to confirm changes
I know what I'm flashing on my tp when I get home
Sent from my EVO using xda premium
Does thia rom support connecting a USB stick for a 3G network connection ?
If not, can it be included in the next update ?
c19932 said:
how did you manage to have transparent status bar/nav bar? When I try to set the color of the status bar, there are no buttons to confirm changes
Click to expand...
Click to collapse
Turn it portrait style when applying the changes.
:good:
Stryeguy said:
Turn it portrait style when applying the changes.
:good:
Click to expand...
Click to collapse
thanks. 2 more questions...
1) anyone got dolphin browser beta working on this rom? mine closes itself immediately after I open it.
2) the status bar seems to cover whatever app is open at the moment. For example, if you open settings, you can see that part of the top is covered by the status bar. is anyone else experiencing the same?
kpyhere said:
Does thia rom support connecting a USB stick for a 3G network connection ?
If not, can it be included in the next update ?
Click to expand...
Click to collapse
Connect it and find out.
Stryeguy said:
Go into Paranoid settings and convert System UI from Phablet to Tablet UI.
Then, go into AOKP settings and enable "Force Tablet UI" to enable the on-screen buttons.
(At least that's what I did.)
Click to expand...
Click to collapse
I tried this and it didn't work for me. Have tried rebooting a few times, enabling and disabling again etc etc, no dice. Anyone got any other suggestions?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 6 (marshmallow), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
Touch
RIL [Calls, Mobile Data]
Wi-Fi
Wi-Fi Hotspot
Bluetooth
Camera
Audio
Sensors
Fingerprint
Flash
GPS
NFC
Known issues:
VoLTE doesn't work.
LED.Note: You can use LED with this awesome method: https://forum.xda-developers.com/lenovo-p2/themes/lenovo-p2-rooted-custom-led-t3589859
This is the one of the first builds for p2a42, so minor bugs are expected.Please report them if any.
Instructions :
Flash Twrp :- LINK
Download the latest build and GApps
Reboot to recovery
Flash the latest build and GApps
Reboot
Downloads :
Latest build [19/06/2017]: https://mega.nz/#!KgcS1boY!f1veK_D-kw_8WYDMD9Id0qytacZuHVN3xvQzB7t0SP0
Google Apps: http://opengapps.org/
Credits :
One Team Forum
XDA:Rom Information
LineageOS 14.1,p2a42, ROM for the Lenovo P2
Contributors
wzedlare
ROM OS Version: 7.1.x Nougat
Version Information
Status: Stable
Created 2017-03-18
Last Updated 2017-06-19
#rezerved for me
How to install Root for Apps on Android Nougat Custom Rom
Download and transfer the Lineage SU addon zip file from the download link above to your device’s storage.
Boot your device into TWRP recovery.
Tap on Install and select the Lineage SU addon zip file that you transferred to your device in Step 1.
After selecting the .zip file, do Swipe to Confirm Flash on the bottom of screen to begin the flashing process.
Once Lineage SU addon is flashed, you’ll get Reboot System option, select it.
How to Enable Root for Apps on Lineage OS
Once you’ve installed the Lineage SU addon zip, do the following to enable root for Apps on Lineage OS:
Enable Developer options: Go to Settings » About phone » Tap seven times on Build number.
Go back to Settings main menu and open Developer options from there.
Look for Root access setting, and set it to Apps and ADB or Apps only, as per your need.
That’s all. Your Android device running on Lineage OS should have full root access for apps now.
If you ever need to disable root access, just go to Settings » Developer options » Root access and select the Disabled option from there.
Download;
addonsu-arm64-signed.zip
Great job, no idea how you build new kernel 3.18.31 for lineage14.1
Thank You!
i want to Root LOS 14.1
is it the same way?? or should i do anything more??? !!
i am thinking of SystemRoot..
please give your suggestions ..
nandakis4 said:
i want to Root LOS 14.1
is it the same way?? or should i do anything more??? !!
i am thinking of SystemRoot..
please give your suggestions ..
Click to expand...
Click to collapse
LineageOs AdeenSu
Download And Flashing
Developer Setting>Root
@wzedlare kindly you fix framework folder, it look so ugly with boot oats and boot arts, i have file folder framework to manage throw thems, but make home button not wake up the screen light when it pressed, i hope it will be fix for next release
Thanks! Very good job. It may be crazy but I think I stay with Android 6, because I love the led notifications.
But maybe I will flash it, because who give a F?
Do you need to format as ext4 or other filesystem?...
Will my SD work, it's exfat??
---------- Post added at 13:27 ---------- Previous post was at 13:16 ----------
hendibudi said:
@wzedlare kindly you fix framework folder, it look so ugly with boot oats and boot arts, i have file folder framework to manage throw thems, but make home button not wake up the screen light when it pressed, i hope it will be fix for next release
Click to expand...
Click to collapse
Why not fix it yourself?
hendibudi said:
@wzedlare kindly you fix framework folder, it look so ugly with boot oats and boot arts, i have file folder framework to manage throw thems, but make home button not wake up the screen light when it pressed, i hope it will be fix for next release
Click to expand...
Click to collapse
They(boot.oat) are being generated automatically if you compile any custom rom.Home button wakes up the device, I won't disable that feature.It is useful for everyone.
ilmervanhattem said:
Thanks! Very good job. It may be crazy but I think I stay with Android 6, because I love the led notifications.
But maybe I will flash it, because who give a F?
Do you need to format as ext4 or other filesystem?...
Will my SD work, it's exfat??
---------- Post added at 13:27 ---------- Previous post was at 13:16 ----------
Why not fix it yourself?
Click to expand...
Click to collapse
You don't have to format anything.Just make your wipes and flash it.
ilmervanhattem said:
Thanks! Very good job. It may be crazy but I think I stay with Android 6, because I love the led notifications.
But maybe I will flash it, because who give a F?
Do you need to format as ext4 or other filesystem?...
Will my SD work, it's exfat??
---------- Post added at 13:27 ---------- Previous post was at 13:16 ----------
Why not fix it yourself?
Click to expand...
Click to collapse
I am sorry, i just junior member on xda, i didn't mean that, i just want to give little contribution to revive our community user p2 experience
WiFi is not working here...
When I turn on WiFi it turns off instantly...
Fawk
I've used the 'super' version of gapps for 7.1 (64bits) btw. Also tried it with TWRP 3.0.2.0 and the aroma installer of gapps, same WiFi error.
Hi there, i am thinking of buying this device for my gf because she needs something with a ****load of battery power. So this device seems the obvious choice. But i have a question:
i noticd that on every rom there is no led and no fingerprint. Is this something that will be added in the future or is it not possible due to unavailabe firmwares?
Kind regards
DDQW said:
Hi there, i am thinking of buying this device for my gf because she needs something with a ****load of battery power. So this device seems the obvious choice. But i have a question:
i noticd that on every rom there is no led and no fingerprint. Is this something that will be added in the future or is it not possible due to unavailabe firmwares?
Kind regards
Click to expand...
Click to collapse
I couldn't fix them, that's my fault.It is not caused by firmware or something.I don't know what will happen in the future.
ilmervanhattem said:
WiFi is not working here...
When I turn on WiFi it turns off instantly...
Fawk
I've used the 'super' version of gapps for 7.1 (64bits) btw.
Click to expand...
Click to collapse
Flash stock rom and use it for ten minutes, wipe data,system,cache,dalvik cache (don't wipe your internal storage, wiping it causes bugs.), then flash the rom.
wzedlare said:
Flash stock rom and use it for ten minutes, wipe data,system,cache,dalvik cache (don't wipe your internal storage, wiping it causes bugs.), then flash the rom.
Click to expand...
Click to collapse
OK my friend.
Got some error and passcode error when restoring. Will try some things and talk to you later.
UPDATE: wifi is working but have to root.
UPDATE: Rooted with version 2.79
UPDATE: Now restoring 484 apps with Titanium Backup
UPDATE: ROM is working smooth af, for how much I experienced by now
i was wondering why i couldnt get gapps to install , then realised i was trying to install the wrong version lol
The Mero said:
i was wondering why i couldnt get gapps to install , then realised i was trying to install the wrong version lol
Click to expand...
Click to collapse
7.1 > arm64 > choose whatever you want, pico is the smaller zip.
cpu-z is saying governor is stuck on performance .. constantly running at 2016mhz on all cores .
Is it possible to change it to dynamic ?
The Mero said:
cpu-z is saying governor is stuck on performance .. constantly running at 2016mhz on all cores .
Is it possible to change it to dynamic ?
Click to expand...
Click to collapse
Use a kernel editor?
which one would be safe / recommend to use ilmervanhattem ?
I wouldnt have a clue where to start ,
Replaced with official builds.
Go here: https://forum.xda-developers.com/galaxy-s4/unified-development/official-lineageos-16-0-t3954912
LineageOS is a free, community built, aftermarket firmware distribution of Android 9.0 (Pie), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
LineageOS 16.0 Install Guide
Note: LineageOS for Galaxy S4 Active is provided with no warranty. You are installing this software at your own risk. You may be violating your warranty.
Download LineageOS and gapps zips and put in /sdcard
Latest build: http://www.mediafire.com/file/nxgfl6b9z545ql2/lineage-16.0-20190723-UNOFFICIAL-jactivelte.zip/file
Builds Archive
Google Apps (MindTheGapps is recommended. Pick ARM, not ARM64)
Before you install LineageOS: Preparation (Optional. If you want to start fresh, these can be skipped)
Install Easy Backup & Restore from Market, run it and backup your stuff.
Boot into recovery. Make a full backup. You will need this backup later if you decide to go back to your previous ROM and data.
I suggest using this TWRP: http://www.mediafire.com/file/18vo85kssa8caqq/twrp-3.2.3-0-jactivelte.img.tar.md5/file
WARNING: Many apps will Force Close crash if you restore data from a previous ROM.
Install
Boot into recovery.
Wipe data and cache.
Flash lineage-16*.zip.
Flash gapps*.zip.
Reboot phone.
After you setup your Google account, reinstall Easy Backup & Restore from Market in order to restore most of your apps, call log and SMS history.
Warning: Do not restore backup data of system apps!
If you restore a bad backup with cached settings in telephony.db in data/data/com.*.*.telephony it can break MMS.
It seems that restoring backups can also break Calendar sync.
Upgrades
Upgrades from previous builds of LineageOS 16.0 are the same process as install, except you do not need to wipe anything. Contrary to popular belief, you do not need to even wipe cache and dalvik-cache when upgrading between LineageOS 16.0 versions. You only need to wipe if you are doing a major upgrade, switching to a different ROM entirely, or attempting to fix bugs caused by bad backups or corrupt app data.
Useful Links:
Source repos:
https://github.com/LineageOS/android_device_samsung_jactivelte
https://github.com/LineageOS/android_device_samsung_jf-common
https://github.com/LineageOS/android_kernel_samsung_jf
https://github.com/TheMuppets/proprietary_vendor_samsung/tree/lineage-16.0/jactivelte
https://github.com/TheMuppets/proprietary_vendor_samsung/tree/lineage-16.0/jf-common
FAQ
Q: How the heck do I get root?
A: Goto Settings and About Phone. Tap Build number 7 times. Go back and enter
Developer options. Change Root access to desired method.
Other Issues?
Use this for obtaining logs.
This ROM should be fully working, as in there's currently no known broken things.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
arco68 said:
This ROM should be fully working, as in there's currently no known broken things.
Click to expand...
Click to collapse
thank you for creating these I9295 ROMs and keeping our devices alive! testing it later.
Jim__boy said:
thank you for creating these I9295 ROMs and keeping our devices alive! testing it later.
Click to expand...
Click to collapse
as of now i noticed that the device's temperature rose, could be my problem, also wifi doesn't work on first boot, with a little shutdown, it worked on the second boot
Jim__boy said:
as of now i noticed that the device's temperature rose, could be my problem, also wifi doesn't work on first boot, with a little shutdown, it worked on the second boot
Click to expand...
Click to collapse
also for some reason, Error 31 appears when i message my tablet, dialer code *#*#4636#*#* doesn't work either.
arco68 said:
This ROM should be fully working, as in there's currently no known broken things.
Click to expand...
Click to collapse
Thank you much for keeping this device alive .Everything works fine on my S4 active without any lags .
Does camera works, is there any trouble with phoning or messaging, how does wi-fi and bluetooth woks?
Jim__boy said:
as of now i noticed that the device's temperature rose, could be my problem, also wifi doesn't work on first boot, with a little shutdown, it worked on the second boot
Click to expand...
Click to collapse
Jim__boy said:
also for some reason, Error 31 appears when i message my tablet, dialer code *#*#4636#*#* doesn't work either.
Click to expand...
Click to collapse
No problems with wifi on first boot here. Also dialer code works fine here.
May I ask what gapps you used? If you used OpenGapps, I don't recommend any other packages than pico or nano. OpenGapps are known for replacing critical system files in Lineage with their own, thus causing all sorts of issues. That's why I stick with MindTheGapps personally.
Evgen_17 said:
Does camera works, is there any trouble with phoning or messaging, how does wi-fi and bluetooth woks?
Click to expand...
Click to collapse
Yes everything is working, including camera.
arco68 said:
No problems with wifi on first boot here. Also dialer code works fine here.
May I ask what gapps you used? If you used OpenGapps, I don't recommend any other packages than pico or nano. OpenGapps are known for replacing critical system files in Lineage with their own, thus causing all sorts of issues. That's why I stick with MindTheGapps personally.
Click to expand...
Click to collapse
I used pico gapps, wifi and sim problem aside, everything is working fine on the phone.
I've installed it today without gapps - everything is working fine, but sometimes I encount freezes of systemUI, and if I try to mod anything in system folder or to clear the system with SDMaid then sometime Wi-Fi (sometimes Bluetooth or mobile internet) do not launch. This bugs fixes with the phone reboot.
Also "Led notifications" for apps (even stok one, such as messaging or missed phones) do not work, but work for battery.
But, however, thanks a lot for this android!
I wonder what is SisUI in the quick settings, can anyone explain it?
PS: sorry for my English a lot.
arco68 said:
Yes everything is working, including camera.
Click to expand...
Click to collapse
Can you tell me about magisk and Xposed..
Evgen_17 said:
I wonder what is SisUI in the quick settings, can anyone explain it?
Click to expand...
Click to collapse
SisUI? Do you have a screenshot of it, as I don't know what that is.
dragon kingdom said:
Can you tell me about magisk and Xposed..
Click to expand...
Click to collapse
Not really, as I've never used them.
arco68 said:
SisUI? Do you have a screenshot of it, as I don't know what that is.
Click to expand...
Click to collapse
Here the screen
I find one small bug:
If, during phone call, I turn on loud speaker, then microphones do not work till the next call.
Evgen_17 said:
Here the screen
Click to expand...
Click to collapse
Looks to be related to debugging, so not something a normal user should be concerned with.
@arco68
Could you test:
1. Audio Mod from @wilsonhlacerda that improves speaker and mic,more info:
https://forum.xda-developers.com/showpost.php?p=79522919&postcount=798
And maybe you can even use it to replace default file ()when building new releases? (example: mixer_paths-LOS2019-IncreaseDualSpk_IncreaseBothMic_Fix-byWilsonhlacerda.xml)
2. whether there is a bug with bluetooth (when you turn it on you call log will be cleared) observed in earlier versions of LineageOS sources (14.1)
thanks in advance
dziubson said:
@arco68
2. whether there is a bug with bluetooth (when you turn it on you call log will be cleared) observed in earlier versions of LineageOS sources (14.1)
Click to expand...
Click to collapse
No, there are no such bugs.
The only one i found is with microphones on loud speaker during call.
Hi @arco68 thanks for this new updated LOS for our devices!
Good to see you building it! I already know your good work to S4 Mini (my girlfriend's backup device; thanks!) and thus I also know how good you can contribute to S4 Active community.
I myself have an S4 Active I9295 as my daily device (currently with LOS14.1, thanks to @_JaSoN_ and @tsvetkov_vlad and old developers of it) and sure I'll try your LOS16 now!
By the way, my girlfriend main device is also an I9295 but unfortunately last week it started to fail SIM phone calls audio (I did some tests and it seems the audio hardware is dead....thru bluetooth audio works fine). Then she is currently using the I9192 with your LOS16 for SIM calls.
---------- Post added at 02:19 AM ---------- Previous post was at 01:32 AM ----------
I've just seen that you suggest to use your own (really yours?) TWRP v3.2.3 on OP. Why it and not the official TWRP v3.3.1? Or even the official v3.2.3?
Have you detected any problems with v3.3.x? Or with official TWRP in general?
Hi, just re-flashed this rom cause of SMS not working and unfortunately something happened weird.
Reddit, Twitter and other apps including XDA Labs doesn't let me sign in and doesn't sync i think? Both twitter and reddit works on my TB3-850M while my I9295 doesn't, i did a restore of my stock rom and both apps let me in and refresh the feed.On my first install of this ROM everything works fine except for SMS, i've been doing re-flashes and wipes all over again however the problem doesn't persist, I hope someone helps me on this matter.