Hello all,
I got the latest update OTA and it appears to have bricked my phone. It looks like it is stuck on the boot screen and won't go further. I went into Recovery and tried to clear cache, but no dice. I also tried to factory reset and no dice either. Now, I'm stuck. I don't have an unlocked bootloader to flash factory images, nor did I ever enable OEM unlocking.
When sideloading the OTA from Google's site, the Android N OTAs don't work, so I tried Marshmallow. Those do work, however, I hit a roadblock and have no idea how to solve it. It starts installing the update when I get the following:
Warning: No file_contextsThis package is for "angler" devices; this is a " ".
E:Error in /sideload/package.zip
(Status 7)
Installation aborted.
How do I fix this? Anyone?!
UserDemos said:
Hello all,
I got the latest update OTA and it appears to have bricked my phone. It looks like it is stuck on the boot screen and won't go further. I went into Recovery and tried to clear cache, but no dice. I also tried to factory reset and no dice either. Now, I'm stuck. I don't have an unlocked bootloader to flash factory images, nor did I ever enable OEM unlocking.
When sideloading the OTA from Google's site, the Android N OTAs don't work, so I tried Marshmallow. Those do work, however, I hit a roadblock and have no idea how to solve it. It starts installing the update when I get the following:
Warning: No file_contextsThis package is for "angler" devices; this is a " ".
E:Error in /sideload/package.zip
(Status 7)
Installation aborted.
How do I fix this? Anyone?!
Click to expand...
Click to collapse
Try this out.
1. Download TOOL ALL IN ONE
2. Download Drives
3. Check if device is recognize
4. Then UNLOCK to unlock bootloader
5. Verify if Bootloader is unlock
6. Flash a stock firmware.
If for some reason that application doesnt work do it manually
1. Install Minimal ADB and Fastboot
To get CMD working just click on the Minimal ADB and Fastboot application program
To flash a .img file place the files inside the Minimal ADB and Fastboot folder located in your program folder
2. Unlock Bootloader ( follow this guide)
3. Then follow the section [ How To Flash The Factory Images]
UserDemos said:
Hello all,
I got the latest update OTA and it appears to have bricked my phone. It looks like it is stuck on the boot screen and won't go further. I went into Recovery and tried to clear cache, but no dice. I also tried to factory reset and no dice either. Now, I'm stuck. I don't have an unlocked bootloader to flash factory images, nor did I ever enable OEM unlocking.
When sideloading the OTA from Google's site, the Android N OTAs don't work, so I tried Marshmallow. Those do work, however, I hit a roadblock and have no idea how to solve it. It starts installing the update when I get the following:
Warning: No file_contextsThis package is for "angler" devices; this is a " ".
E:Error in /sideload/package.zip
(Status 7)
Installation aborted.
How do I fix this? Anyone?!
Click to expand...
Click to collapse
Having the exact same problem this OTA has also bricked my phone.. It just shows boot animation forever. I've tried factory resetting, clearing cache and side-loading the OTA which succeeded but still didn't change anything. I didn't have OEM unlocking enabled so I can't even flash stock again I think I'm screwed
peaconut, I never selected the OEM unlock option whenever I had the N Preview. Just didn't expect to have it get totally messed up from an OTA.
Any additional thoughts based on my errors produced?
I had the bootloop issue as well. I fixed it by:
booting into recovery
wiping cache
wiping data
wiping cache
reboot
Booted into N just fine. Sucks I lost data, but was a quick fix.
Note: I never unlocked bootloader ever with phone. Was a bone stock 6 install with May security patch that was OTA updated that broke.
major97702 said:
I had the bootloop issue as well. I fixed it by:
booting into recovery
wiping cache
wiping data
wiping cache
reboot
Booted into N just fine. Sucks I lost data, but was a quick fix.
Note: I never unlocked bootloader ever with phone. Was a bone stock 6 install with May security patch that was OTA updated that broke.
Click to expand...
Click to collapse
Or, you can let it bootloop for about 15 mins, and it fixes itself...that's what mine did, scared the crap out of me at first, thank goodness I've learned patience....
You don't need it unlock. I was just explain the process to unbrick it in case you had a soft brick
---------- Post added at 10:05 PM ---------- Previous post was at 10:04 PM ----------
UserDemos said:
peaconut, I never selected the OEM unlock option whenever I had the N Preview. Just didn't expect to have it get totally messed up from an OTA.
Any additional thoughts based on my errors produced?
Click to expand...
Click to collapse
I'm in the same boat. Took the OTA and it bootlooped for at least an hour or 2. I did the adb sideload ota and still bootlooping. Tried factory reset and cache wipe and has been trying to boot for 10 mins without any luck. Hoping it just boots because I have no other ideas.
Imacellist said:
I'm in the same boat. Took the OTA and it bootlooped for at least an hour or 2. I did the adb sideload ota and still bootlooping. Tried factory reset and cache wipe and has been trying to boot for 10 mins without any luck. Hoping it just boots because I have no other ideas.
Click to expand...
Click to collapse
I'm in the exact same position as you! Let me know if anything changes
can anyone help me please? i did the ota update and i am stuck on the boot animation. i dont even have access to adb sideload since i didnt enable usb debugging and i also didnt enable oem unlocking
Ame123 said:
can anyone help me please? i did the ota update and i am stuck on the boot animation. i dont even have access to adb sideload since i didnt enable usb debugging and i also didnt enable oem unlocking
Click to expand...
Click to collapse
You didn't need to do that, and side load will still work. Just boot into recovery, and choose update from adb. You may just need to install drivers on your PC but it should work.
I was unable to resolve my issue, and got on chat with Google support. They are replacing it for me, so if you can't fix it try chatting with them.
Imacellist said:
You didn't need to do that, and side load will still work. Just boot into recovery, and choose update from adb. You may just need to install drivers on your PC but it should work.
I was unable to resolve my issue, and got on chat with Google support. They are replacing it for me, so if you can't fix it try chatting with them.
Click to expand...
Click to collapse
my nexus 6p is connecting via fast boot but its not connecting via adb can you help me? and where should i go to chat with google? can you give the link?
Imacellist said:
You didn't need to do that, and side load will still work. Just boot into recovery, and choose update from adb. You may just need to install drivers on your PC but it should work.
I was unable to resolve my issue, and got on chat with Google support. They are replacing it for me, so if you can't fix it try chatting with them.
Click to expand...
Click to collapse
Did you buy your phone through Google? I'm still having the issue however I bought my phone through Carphone Warehouse in the UK, gonna go down this weekend and see what they say
For Google chat just go to the play store on your PC and click help. As for adb, did you choose recovery, then update from adb? If so adb should be working fine. If not then it's a driver issue on your PC.
---------- Post added at 01:06 PM ---------- Previous post was at 01:04 PM ----------
AlfexOmega said:
Did you buy your phone through Google? I'm still having the issue however I bought my phone through Carphone Warehouse in the UK, gonna go down this weekend and see what they say
Click to expand...
Click to collapse
Yes I bought it through Google. This has always provided the best customer service from my experience. Did you at least get Nexus protect? If so at least you can pay to replace it.
Mine got in a bootloop. I entered recovery mode and performed a reset/wipe and it worked.
Sent from my Nexus 6P using Tapatalk
mkouk said:
Mine got in a bootloop. I entered recovery mode and performed a reset/wipe and it worked.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
you are lucky mate i have wiped so many times but it still gets stuck on the boot animation forever. also adb isnt working the since i never connected it to the pc. now i dont have a phone :crying::crying::crying:
UserDemos said:
Hello all,
I got the latest update OTA and it appears to have bricked my phone. It looks like it is stuck on the boot screen and won't go further. I went into Recovery and tried to clear cache, but no dice. I also tried to factory reset and no dice either. Now, I'm stuck. I don't have an unlocked bootloader to flash factory images, nor did I ever enable OEM unlocking.
When sideloading the OTA from Google's site, the Android N OTAs don't work, so I tried Marshmallow. Those do work, however, I hit a roadblock and have no idea how to solve it. It starts installing the update when I get the following:
Warning: No file_contextsThis package is for "angler" devices; this is a " ".
E:Error in /sideload/package.zip
(Status 7)
Installation aborted.
How do I fix this? Anyone?!
Click to expand...
Click to collapse
checkout my thread http://forum.xda-developers.com/nexus-6p/help/help-unbricking-nexus-6p-t3382895
Ame123 said:
checkout my thread http://forum.xda-developers.com/nexus-6p/help/help-unbricking-nexus-6p-t3382895
Click to expand...
Click to collapse
You are a life-saver my friend! I'm going to post this thread in so many places for other people who are having the same issues as I did. You literally saved me a $500 headache. Amazing!
So here's an interesting change. So after reading the advice of others to flash the ota that you receive to revert from N, I was able to get M to boot normally. I unlocked the bootloader, and then tried updating back to the N beta. Didn't work. No problem, I'll just flash the factory image, still nope. Basically I can consistently get it to boot to M, but once I try to upgrade it to N, I get nothing. I've had it on N before, but moved off it due to stability. Any thoughts?
hey all, i was on developer preview 4 when this happened. however, I never flashed manually, always OTA. I cannot access recovery. any option besides "barcodes" results in a bootloop. I can fastboot and unlock, push an image, and relock, but it still bootloops. any thoughts?
Related
After attempt at installing software update to Nexus 10 tablet will not boot. Have wiped Cache and even then did a factory reset. Nothing. Google appears and then twirling colorful dots and nothing. For hours just twirling dots., Samsung and Google and Best Buy geeks says nothing they can do. No longer under warranty but very upset since tablet was working great until update. I am not very tech savvy but can anyone help or do I just have a new paperweight? Thanks for any advice.
I have not made any modifications to the tablet.
Just flash the newest factory image. Get it and the instructions to flash it from here:
https://developers.google.com/android/nexus/images
yes flash the newest image
After getting a notification of the latest update I went and rebooted for the update to install but it went to the twrp recovery and nothing happens, is there a way to install the update?
VivaErBetis said:
Just flash the newest factory image. Get it and the instructions to flash it from here:
https://developers.google.com/android/nexus/images
Click to expand...
Click to collapse
Gibbothegreat said:
After getting a notification of the latest update I went and rebooted for the update to install but it went to the twrp recovery and nothing happens, is there a way to install the update?
Click to expand...
Click to collapse
Still having proble? what is your recovery ? stock? did you update the bootloader? depending on your answer I should be able to help you out, thx
Khaon said:
Still having proble? what is your recovery ? stock? did you update the bootloader? depending on your answer I should be able to help you out, thx
Click to expand...
Click to collapse
Hi Khaon, I have stock lollipop version 5.1.1 . (LMY47V) and latest twrp version. When upgrading it restarts and goes to recoverys main screen.
BTW how can I check which version my bootloader is?
same problem
VivaErBetis said:
Just flash the newest factory image. Get it and the instructions to flash it from here:
as a newbie .I'm not allowed to reference your link !!
I rooted my nexus 10 using xda instructions., installed CWM. All good. I tried backup and recovery and screwed something up in recovery. Got stuck in recovery mode reboot loop. Many gyrations, no fix, so I tried factory reset. Still no fix.
I decided to install a new version of the OS using the Mantaray tar you reference above. UBS connecting and fastboot. All messages look good. Now I have the problem reported in this thread. Stuck with flying balls and no boot. Very interested in any suggestions you may have.
Click to expand...
Click to collapse
Gibbothegreat said:
Hi Khaon, I have stock lollipop version 5.1.1 . (LMY47V) and latest twrp version. When upgrading it restarts and goes to recoverys main screen.
BTW how can I check which version my bootloader is?
Click to expand...
Click to collapse
So you keep just boot looping into twrp, right ?
Did you try installing a custom ROM through adb or just connecting your device?
If it keeps boot looping you gotta to wipe the full storage.
Khaon said:
So you keep just boot looping into twrp, right ?
Did you try installing a custom ROM through adb or just connecting your device?
If it keeps boot looping you gotta to wipe the full storage.
Click to expand...
Click to collapse
No, on a normal reboot or a shutdown/restart it's fine no problems there but when I try to install the update via system update it reboots into twrp. I attach a pic of my system.
Gibbothegreat said:
No, on a normal reboot or a shutdown/restart it's fine no problems there but when I try to install the update via system update it reboots into twrp. I attach a pic of my system.
Click to expand...
Click to collapse
Oh I see, well, you should just flash a custom ROM or if you want to stay with official factory images, you should just follow instruction there:
https://developers.google.com/android/nexus/images
What you do need is just have fastboot executable once you are into the bootloader.
You can easily access the bootloader from twrp : shutdown > reboot into booatloader
Cool thx for your continued help :good:
The problem is due to your attempting an OTA update with a custom recovery (TWRP). You can only do OTA with stock recovery. Once you are in this situation, your easiest way out of it is to simply apply the latest factory image using "fastboot", but this will also wipe your user data so backup any photos, music, etc. before you start. You will also have to reload programs from Playstore once the new image is installed.
*** NOTE: Please excuse my English.
*** WARNING: I'm not responsible if anything happens to your device, I'm just sharing my experience and what I did to fix my own phone. Proceed at your own RISK.
I bought my Nexus 6p 64gb and as soon as I took it out of the box, I went directly and followed the guide here. So i unlocked the bootloader, flashed TWRP as a custom recovery, flashed CM13 + OpenGapps.
I noticed that every time I boot my device I get this warning:
Your device is corrupt. It can’t be
trusted and may not work properly.
Visit this link on another device:
go.co/ABH
and it does not seem to be a normal warning because when my OS boots up it shows me this
"Android system:
There’s an internal problem with your device. Contact your manufacturer for details"
Later on when I updated to the latest nightly image my camera crashes and doesn't function properly. I also already has an issue with Bluetooth and "Bluetooth share" crashing but that was unrelated. Anyways I was crippled in my day to day usage. Then I thought that I need to fix this asap because it might cause performance/security/hardware problems in the future.
So basically the fix is you should flash the latest bootloader image and radio image. Personally I wanted to start clean and make sure I have no corrupted files so here is what I did,
1. What i did is erase all boot, system, kernel & recovery files by typing the below command using fastboot just incase they were corrupted,
(Note: YOU DONT NEED TO DO THIS STEP, but i prefer starting clean incase i had some corrupted files. YOU WILL ALSO LOSE ENCRYPTION DOING THE FIRST STEP)
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
Source: http://devs-lab.com/...i-nexus-6p.html
2. Then i flashed the latest factory images in this sequence using fastboot, which can be found here: https://developers.g...s/images#angler
(Note: 6.0.1 (MMB29M) was latest image at the time i did this. For people who are doing this for the first time, then you just need to download the image then extract the needed files from it)
fastboot flash bootloader bootloader-angler-angler-xx.xxx.img
fastboot reboot-bootloader
fastboot flash radio radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash cache cache.img
fastboot flash vendor vendor.img
fastboot format userdata
fastboot reboot
Source: http://forum.xda-dev...operly-t3268407
3. From there i reflashed TWRP using fastboot, then flashed the latest beta SuperSU v2.62 at the time, and then CM13, then OpenGapps, then again reflashed SuperSU v2.62 just incase, lol. (Do not flash the version of SuperSU that TWRP offers to flash for you in order to give you root, it is not compatible and will cause problems. When using TWRP before you've actually flashed SuperSU 2.50+, when you attempt to reboot out of TWRP it will tell you that it's detecting that you don't have root and it will offer to root for you, skip past this.)
What got fixed ?
-FIXED, this won't show up anymore:
Your device is corrupt. It can’t be
trusted and may not work properly.
Visit this link on another device:
go.co/ABH
-FIXED, this won't show up anymore:
Android system:
There’s an internal problem with your device. Contact your manufacturer for details.
-FIXED, Camera is working !
-NOT FIXED, "Bluetooth share" still crashes but I think its unrelated to this issue.
Hope this helps everyone as it helped me, thanks.
Sent from my Nexus 6P using Tapatalk
\*O / Thank you !!
Thanks, but better option? Don't reboot.
Sent from my Nexus 6P using Tapatalk
bob_mord_les said:
\*O / Thank you !!
Click to expand...
Click to collapse
Ur welcome [emoji1]
Sent from my Nexus 6P using Tapatalk
Followed your guide, thanks, but the message "Your device is corrupt. It can’t betrusted and may not work properly." still appears during a CM boot.
The message "There’s an internal problem with your device. Contact your manufacturer for details" appears when I boot into recovery (TWRP)
The camera is working now.
Also, before I was able to flash CM-13 I had to do "WIPE >> Format Data" from TWRP, otherwise CM was exiting with error 7.
The following packages were used:
original 6.0.1 (MMB29P) factory image
BETA-SuperSU-v2.66-20160103015024.zip
cm-13.0-20160115-NIGHTLY-angler.zip
open_gapps-arm64-6.0-micro-20160115.zip
twrp-2.8.7.2-angler.img
I also noticed that when rebooting into factory image, the same warning message appears as well.
Any way to fix it or did I do something wrong?
Why are people trying to fix an non issue? To get rid of the message you need to relock the bootloader which is more of a risk if your rooted. Its a message that only appears for a few seconds when you reboot and you don't need to do anything to get past it.
There is no corruption and the phone is trusted by YOU as you unlocked it and nothing else cares. Where is the issue?
g_kos said:
Followed your guide, thanks, but the message "Your device is corrupt. It can’t betrusted and may not work properly." still appears during a CM boot.
The message "There’s an internal problem with your device. Contact your manufacturer for details" appears when I boot into recovery (TWRP)
The camera is working now.
Also, before I was able to flash CM-13 I had to do "WIPE >> Format Data" from TWRP, otherwise CM was exiting with error 7.
The following packages were used:
original 6.0.1 (MMB29P) factory image
BETA-SuperSU-v2.66-20160103015024.zip
cm-13.0-20160115-NIGHTLY-angler.zip
open_gapps-arm64-6.0-micro-20160115.zip
twrp-2.8.7.2-angler.img
I also noticed that when rebooting into factory image, the same warning message appears as well.
Any way to fix it or did I do something wrong?
Click to expand...
Click to collapse
It's just telling you what you already know. You modified your system partition yourself so don't worry about it.
https://support.google.com/nexus/answer/6185381?hl=en
XxMORPHEOUSxX said:
It's just telling you what you already know. You modified your system partition yourself so don't worry about it.
https://support.google.com/nexus/answer/6185381?hl=en
Click to expand...
Click to collapse
Thanks. I read it in the original Heisenberg's unlock guide and was surprised when I read this post that it was possible to get rid of the warning message without locking the bootloader .
I'm new here in the forum's..I usually just read and carry on..the one think I'd like to say is..I don't understand why people got to say 'why you doing that for, ya don't need to' far as I know..this an educational site to learn..if he wants learn how to get rid of the warning..I don't see any problems in that whatsoever.
The message "There is an internal problem with your device..." seems to be related to the security patch version. This was my biggest issue, the message I get when booting the phone was annoying and I knew it was not a big deal, but having an internal problem warning was concerning, flashing the vendor image was the solution for me. But if you like to start clean then I have the steps written, but if you update then again you'll get the warning when booting up.
Sent from my Nexus 6P using Tapatalk
zooman31 said:
I'm new here in the forum's..I usually just read and carry on..the one think I'd like to say is..I don't understand why people got to say 'why you doing that for, ya don't need to' far as I know..this an educational site to learn..if he wants learn how to get rid of the warning..I don't see any problems in that whatsoever.
Click to expand...
Click to collapse
I think what people are trying to say is the risk/reward for getting rid of the message is not worth it. Especially since its just a brief warning you only see during boot. Just flashing twrp recovery will give the red message. SuperSU will help get rid of it which is why the OP was able to remedy it. It will not work for everyone though. Modifying the bootloader is the only sure fire way to snuff it out for good and you would be a fool to try and mess with your bootloader for something aesthetic. That's how most real bricks happen, is when a bootloader gets corrupted.
XxMORPHEOUSxX said:
I think what people are trying to say is the risk/reward for getting rid of the message is not worth it. Especially since its just a brief warning you only see during bouot. Just flashing twrp recovery will give the red message. SuperSU will help get rid of it which is why the OP was able to remedy it. It will not work for everyone though. Modifying the bootloader is the only sure fire way to snuff it out for good and you would be a fool to try and mess with your bootloader for something aesthetic. That's how most real bricks happen, is when a bootloader gets corrupted.
Click to expand...
Click to collapse
I assume that most people know the drill..you proceed to test at your own risk..the how to in the first post seemed to have worked after it was tested by the author.
zooman31 said:
I assume that most people know the drill..you proceed to test at your own risk..the how to in the first post seemed to have worked after it was tested by the author.
Click to expand...
Click to collapse
Basically just flash SuperSU last in whatever sequence, and as long as it boots,the red message will be gone. But change anything after and it will probably come back. I have nothing negative to say about this thread. I originally posted the nexus link just so people can rest assured that it is not an actual problem and a normal, albeit annoying, side effect of modifying the Nexus 6p. Happy Flashing
XxMORPHEOUSxX said:
Basically just flash SuperSU last in whatever sequence, and as long as it boots,the red message will be gone. But change anything after and it will probably come back. I have nothing negative to say about this thread. I originally posted the nexus link just so people can rest assured that it is not an actual problem and a normal, albeit annoying, side effect of modifying the Nexus 6p. Happy Flashing
Click to expand...
Click to collapse
all i did was flash twrp and unlocked the bootloader and still got the red message. so all i have to do is flash supersu and root? to get rid of it?
TechMillz93 said:
all i did was flash twrp and unlocked the bootloader and still got the red message. so all i have to do is flash supersu and root? to get rid of it?
Click to expand...
Click to collapse
Yes. The SuperSU beta 2.66 is what I use.
XxMORPHEOUSxX said:
Yes. The SuperSU beta 2.66 is what I use.
Click to expand...
Click to collapse
so i just reflashed the vendor and now im in bootloop ;(
TechMillz93 said:
so i just reflashed the vendor and now im in bootloop ;(
Click to expand...
Click to collapse
Why did you flash vendor? Try clearing caches and then reboot. Let it sit for 10 min too while starting up.
XxMORPHEOUSxX said:
Why did you flash vendor? Try clearing caches and then reboot. Let it sit for 10 min too while starting up.
Click to expand...
Click to collapse
im good now i just reflashed all the images im good.
but i have to feflash twrp now, what would u recommend
systemless or traditional ?
TechMillz93 said:
im good now i just reflashed all the images im good.
but i have to feflash twrp now, what would u recommend
systemless or traditional ?
Click to expand...
Click to collapse
Systemless unless you want to use xposed otherwise it doesn't matter. Systemless just makes it so you can use root apps like android pay. I use the 2.66 systemless. The instructions are a little all over the place on that thread. You no longer need a modified boot.IMG. the SuperSU zip patches whatever boot.IMG you have. So all you need to flash is the supersu2.66 for systemless or the traditional zip if going that route.
XxMORPHEOUSxX said:
Systemless unless you want to use xposed otherwise it doesn't matter. Systemless just makes it so you can use root apps like android pay. I use the 2.66 systemless. The instructions are a little all over the place on that thread. You no longer need a modified boot.IMG. the SuperSU zip patches whatever boot.IMG you have. So all you need to flash is the supersu2.66 for systemless or the traditional zip if going that route.
Click to expand...
Click to collapse
so i dont need gapps etc?
its all in there?
Hi,
So quick summary of what happened. I went to make coffee, came back to desk and my N6P has been stuck in boot loop.
It was running the latest Android 7.1.1 build (NPF26F)
I can access fastboot and recovery fine. However, I can't flash anything from fastboot as the device wasn't unlocked.
I tried wiping data / factory & cache from fastboot and recovery with no difference in result.
I also can't seem to sideload anything as all the OTA's from google come back with 'Can't install this package (%Date of build%) over newer build.
The latest OTA i can find is: 7.1.1 NMF26F (angler-ota-nmf26f-61b4a915.zip)
I also tried the official 7.0 NBD91K (angler-ota-nbd91k-32c2eac8.zip) with the same result.
Is there a different OTA I can use or can I force it to sideload an older version or any other suggestions?
I really don't want to have to deal with my telco. I'll be without a phone for weeks if I have to :'(
I have a phone with the same problem. Haven't gotten an answer yet. I am starting to wonder if it's an issue with the build.
bkgovols said:
I have a phone with the same problem. Haven't gotten an answer yet. I am starting to wonder if it's an issue with the build.
Click to expand...
Click to collapse
When you say haven't gotten an answer yet.... you posted it somewhere? I bet an easy fix for google would be to release a newer full OTA... but unless they respond in a day, i'll be returning phone...
gunigugu said:
Hi,
So quick summary of what happened. I went to make coffee, came back to desk and my N6P has been stuck in boot loop.
It was running the latest Android 7.1.1 build (NPF26F)
I can access fastboot and recovery fine. However, I can't flash anything from fastboot as the device wasn't unlocked.
I tried wiping data / factory & cache from fastboot and recovery with no difference in result.
I also can't seem to sideload anything as all the OTA's from google come back with 'Can't install this package (%Date of build%) over newer build.
The latest OTA i can find is: 7.1.1 NMF26F (angler-ota-nmf26f-61b4a915.zip)
I also tried the official 7.0 NBD91K (angler-ota-nbd91k-32c2eac8.zip) with the same result.
Is there a different OTA I can use or can I force it to sideload an older version or any other suggestions?
I really don't want to have to deal with my telco. I'll be without a phone for weeks if I have to :'(
Click to expand...
Click to collapse
You can unlock bootloader if you have fast boot. The computer needs to recognise your phone. Then just follow the steps in the beginner's guide.
tropical cactus said:
You can unlock bootloader if you have fast boot. The computer needs to recognise your phone. Then just follow the steps in the beginner's guide.
Click to expand...
Click to collapse
No, unfortunately, you can no longer unlock nexus devices from just the bootloader. You need access to Android OS.
gunigugu said:
No, unfortunately, you can no longer unlock nexus devices from just the bootloader. You need access to Android OS.
Click to expand...
Click to collapse
Install Android SDK or find adb mini bundle. Download latest factory images from Google's website. Run this command to sideload the factory image. You DON'T need unlocked bootloader for this command.
HTML:
adb sideload yourFactoryImagesFile
gunigugu said:
Hi,
...I can access fastboot and recovery fine. However, I can't flash anything from fastboot as the device wasn't unlocked....
Click to expand...
Click to collapse
You never went into Developer Options and toggled the "allow OEM Unlock"? If not, you will not be able to unlock bootloader via fastboot.
And are you positive you did a proper "factory reset" from recovery? From stock, this should get you out of a boot loop. The naming convention Google used for DP2/Public Release was screwed up and I've seen others reporting the inability to flash OTA's but the solution was to flash the full Google image. As someone else suggested, until a new OTA hits with a newer (higher) number, you may be out of luck. Maybe someone with more experience can help with perhaps altering the OTA signature?
fapste said:
Install Android SDK or find adb mini bundle. Download latest factory images from Google's website. Run this command to sideload the factory image. You DON'T need unlocked bootloader for this command.
HTML:
adb sideload yourFactoryImagesFile
Click to expand...
Click to collapse
Unfortunately as mentioned in original post 'I also can't seem to sideload anything as all the OTA's from google come back with 'Can't install this package (%Date of build%) over newer build'
v12xke said:
You never went into Developer Options and toggled the "allow OEM Unlock"? If not, you will not be able to unlock bootloader via fastboot.
And are you positive you did a proper "factory reset" from recovery? From stock, this should get you out of a boot loop. The naming convention Google used for DP2/Public Release was screwed up and I've seen others reporting the inability to flash OTA's but the solution was to flash the full Google image. As someone else suggested, until a new OTA hits with a newer (higher) number, you may be out of luck. Maybe someone with more experience can help with perhaps altering the OTA signature?
Click to expand...
Click to collapse
Yup never did it :'(
Didn't think I needed to unlock / root my devices anymore since I can get all the functionality out of stock android these days. Though now I feel like I'm being punished for not unlocking it :'(
I'm positive I did a factory reset from recovery. I do believe flashing a full google image would fix the issue, but im unable to from fastboot as device is locked and sideload images appear to be older :'(
Really sorry to hear this, and I know being without the phone even for a day or two is inconvenient at best. Could be critical for your work or school. Most every bootloop I have encountered, I've been able to fix by re-flashing the kernel. Either stock or custom... like EX Kernel. Have you ever played with WugFresh's NRT? You can temp flash TWRP and maybe temp flash or flash the kernel? This probably won't work with a locked bootloader If you could just start the OS, you could toggle the OEM unlock. At a minimum, TWRP will give you a file manager, MTP file transfer, wiping and other tools. If you have time, it may be worth a try. Other than that, successfully altering the signature of the OTA may work, but I've not seen any work on this, but have never had to look. I'd keep searching for ppl having the difficulty of going from DP2 to Public Release (older/newer) and see if there was another solution other than flashing the full image, which obviously you can't do right now. Good luck, and let us know if you make any progress.
Edit : Read here for possible help. This may work in conjunction with getting TWRP installed via NRT.
gunigugu said:
Unfortunately as mentioned in original post 'I also can't seem to sideload anything as all the OTA's from google come back with 'Can't install this package (%Date of build%) over newer build'
Click to expand...
Click to collapse
How can flashing the latest factory images released on 6 December can give this error? Make sure you download the 6 December factory images
fapste said:
How can flashing the latest factory images released on 6 December can give this error? Make sure you download the 6 December factory images
Click to expand...
Click to collapse
Many ppl have had problems sideloading the OTA coming from DP2 to Public Release NPF26F->>NMF26F and not just the 6P. Because the Public release numerically is "older" the OTA will not flash. When unlocked, the solution was to flash the full Google image, rather than the OTA. Why in their infinite wisdom Google did this I have no idea. Options are very slim when your bootloader is locked and you are stuck in a boot loop. OP cannot flash a full image when the NMF26F OTA is parsed as being "older".
fapste said:
How can flashing the latest factory images released on 6 December can give this error? Make sure you download the 6 December factory images
Click to expand...
Click to collapse
I believe it's because the latest OTA on https://developers.google.com/android/ota is 7.1.1 (NMF26F) and my phone is already running 7.1.1 build (NPF26F).
v12xke said:
Many ppl have had sideloading OTA coming from DP2 to Public Release NPF26F->>NMF26F and not just the 6P. Because the Public release numerically is "older" the OTA will not flash. When unlocked, the solution was to flash the full Google image, rather than the OTA. Why in their infinite wisdom Google did this I have no idea. Options are very slim when your bootloader is locked and you are stuck in a boot loop. OP cannot flash a full image when the NMF26F OTA is parsed as being "older".
Click to expand...
Click to collapse
This guy gets it!!! Yeah, I've unlocked a lot of my older devices and am comfortable with 'messing' my devices, but I didn't with the 6p as the stock experience is great now. But now I feel like I'm being punished because my device is dead with no recourse for action. Unless google release a newer full OTA.
If you haven't given up yet and gone back to the carrier with the phone, try the NRT toolkit to temp flash TWRP, and then FORMAT each partition, then try to reflash OTA with TWRP. Under "Advanced Utilities".
v12xke said:
If you haven't given up yet and gone back to the carrier with the phone, try the NRT toolkit to temp flash TWRP, and then FORMAT each partition, then try to reflash OTA with TWRP. Under "Advanced Utilities".
Click to expand...
Click to collapse
This will work on a locked device? I'll give it a crack and report back.
v12xke said:
If you haven't given up yet and gone back to the carrier with the phone, try the NRT toolkit to temp flash TWRP, and then FORMAT each partition, then try to reflash OTA with TWRP. Under "Advanced Utilities".
Click to expand...
Click to collapse
Yeah failed :'( (remote: unlock device to use this command)
[Guide] Fool/Noob proof way to do clean installs on Nexus Devices
http://forum.xda-developers.com/nexu...talls-t3518311
try this clean install should work i encountered a problem like this too
boxguy1 said:
[Guide] Fool/Noob proof way to do clean installs on Nexus Devices
http://forum.xda-developers.com/nexu...talls-t3518311
try this clean install should work i encountered a problem like this too
Click to expand...
Click to collapse
Firstly your link is broken: It's http://forum.xda-developers.com/nexus-6p/general/guide-fool-noob-proof-to-clean-installs-t3518311
Secondly as I've mentioned a few times including the OP. The device is locked. You need access to Android OS to unlock. It can not be done just from bootloader. So this does not work, but thanks for posting the suggestion anyway.
Deleted
---------- Post added at 05:53 AM ---------- Previous post was at 05:34 AM ----------
gunigugu said:
Firstly your link is broken: It's http://forum.xda-developers.com/nexus-6p/general/guide-fool-noob-proof-to-clean-installs-t3518311
Secondly as I've mentioned a few times including the OP. The device is locked. You need access to Android OS to unlock. It can not be done just from bootloader. So this does not work, but thanks for posting the suggestion anyway.
Click to expand...
Click to collapse
Sorry I thought it would have worked you should wait until the January security patch as all the other users said best of luck
Here is how you fix it.
Step 1. download OnePlus3t toolkit (note: don't attach the phone to PC yet)
step 2. reboot your phone into bootloader (if in twrp hit restart -> bootloader) if not in twrp try turning phone on and as you see the oem unlock screen hit volume up and down and choose fastboot (or bootloader)
step 3. open oneplus3t toolkit
step 4. choose option 8 (flash stock recovery)
step 5. hit enter and when it says waiting 4 devices attach your device to pc
step 6. let it finish
step 7. when recovery comes up, hold power button for 10 seconds or hit exit (if you can choose it) and reboot into system
step 8. if it keeps rebooting into a stock recovery and you cant decrypt... then when your phone first boots and goes into oem-unlock error hit volume up and click restart.
step 9. Reflash TWRP and SuperSU if needed
Step 10. Enjoy!
Did not work for me. Stock recovery, stock nougat, locked bootloader and I still have dm-verity error.
Skwerl23 said:
Here is how you fix it.
Step 1. download OnePlus3t toolkit (note: don't attach the phone to PC yet)
step 2. reboot your phone into bootloader (if in twrp hit restart -> bootloader) if not in twrp try turning phone on and as you see the oem unlock screen hit volume up and down and choose fastboot (or bootloader)
step 3. open oneplus3t toolkit
step 4. choose option 8 (flash stock recovery)
step 5. hit enter and when it says waiting 4 devices attach your device to pc
step 6. let it finish
step 7. when recovery comes up, hold power button for 10 seconds or hit exit (if you can choose it) and reboot into system
step 8. if it keeps rebooting into a stock recovery and you cant decrypt... then when your phone first boots and goes into oem-unlock error hit volume up and click restart.
step 9. enjoy!
Click to expand...
Click to collapse
Can TWRP be installed afterwards or will it come back when TWRP is installed?
Michalko5896 said:
Did not work for me. Stock recovery, stock nougat, locked bootloader and I still have dm-verity error.
Click to expand...
Click to collapse
Try flashing TWRP and back to stock recovery.
If all keeps happening you may need to follow the guide to unbrick the phone.
I'd personally keep flashing different things if data is important. Sorry to hear this happened. Sounds like dm-verity should never have been a thing. So frustrating. Please update us on what you find. You can always erase system and all then reflash image.
Skwerl23 said:
Try flashing TWRP and back to stock recovery.
If all keeps happening you may need to follow the guide to unbrick the phone.
I'd personally keep flashing different things if data is important. Sorry to hear this happened. Sounds like dm-verity should never have been a thing. So frustrating. Please update us on what you find. You can always erase system and all then reflash image.
Click to expand...
Click to collapse
I have tried everything. DM-verity error every fricking time.. Tbh, I really hate oneplus. They are not releasing factory images, with factory images I could fix every issue in 5 minutes.
I feel your frustration. There is this forum
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
Michalko5896 said:
I have tried everything. DM-verity error every fricking time.. Tbh, I really hate oneplus. They are not releasing factory images, with factory images I could fix every issue in 5 minutes.
Click to expand...
Click to collapse
Go to TWRP>Wipe>Advanced Wipe>Select system>Repair or change file system>Change filesystem>EXT4>Flash your ROM
That fixed it for me
Michalko5896 said:
I have tried everything. DM-verity error every fricking time.. Tbh, I really hate oneplus. They are not releasing factory images, with factory images I could fix every issue in 5 minutes.
Click to expand...
Click to collapse
I used the hard brick fix to go back to 3.5.1? I let the system update to 3.5.4. Go into developer settings and check allow oem unlock. Went into bootloader and oem unlocked. It will erase everything. Downloaded and put the OTA patch(940gb~not full) and supersu 2.79 on the device somewhere and did a local update with the patch through stock recovery. Went into bootloader and flashed TWRP 3.0.2.0(not 3.0.3.0). Do not exit bootloader. In bootloader I fastboot BOOT the 3.0.2.0 TWRP(3.0.3.0 would not boot up and screwed the dm-verity). If it(3.0.2.0) doesn't want to boot then quickly hold the power button in and wait till it starts rebooting and go into recovery menu option). Swipe to allow modifications and flash the supersu 2.79 that was placed on the device somewhere. This worked for me and no dm-verity error with f2fs.
Long process but it worked.
does dm-verity error mean anything? I have it also currently but nougat seems to be running fine...
PaKii94 said:
does dm-verity error mean anything? I have it also currently but nougat seems to be running fine...
Click to expand...
Click to collapse
https://source.android.com/security/verifiedboot/
In a nutshell, extra security on the boot partition to "ensure chain of trust" one of the possible requirements for Android Pay backend.
********EDIT***********
This method didn't work on the newest beta, and the OP3T ToolKit way has never worked for me on any version of OOS.
card13 said:
https://source.android.com/security/verifiedboot/
In a nutshell, extra security on the boot partition to "ensure chain of trust" one of the possible requirements for Android Pay backend.
********EDIT***********
This method didn't work on the newest beta, and the OP3T ToolKit way has never worked for me on any version of OOS.
Click to expand...
Click to collapse
I see thanks. I guess it doesn't matter to me cause I haven't started using android Pay and since I'm rooted currently
What causes the dm-verity issue in the first place?
guys if my device is unlocked will i still get the ota updates?
how about root ? if my device rooted willi still get ota updates?
saberzaid said:
guys if my device is unlocked will i still get the ota updates?
how about root ? if my device rooted willi still get ota updates?
Click to expand...
Click to collapse
Yes to first. No to second, It will try but will fail.
Sent from my ONEPLUS A3000 using Tapatalk
Mine is unlocked and rooted. The update failed. Then it redownloaded the full 1.4gb. That's how I found the URL. Then it flashed fine but brought recovery to stock and wiped root. Had to use the toolkit to get TWRP and root back.
So yes, even rooted gets the update
noahvt said:
Go to TWRP>Wipe>Advanced Wipe>Select system>Repair or change file system>Change filesystem>EXT4>Flash your ROM
That fixed it for me
Click to expand...
Click to collapse
I did a system restore previously and it set system to ext4. Maybe that's why I didn't have issues.
This dm-verity issue could be showing the instability of f2fs. Hmmm
Hello, just reset original rom under 6.0.1 and the problems and then twrp then flash rom custom
jejemc said:
Hello, just reset original rom under 6.0.1 and the problems and then twrp then flash rom custom
Click to expand...
Click to collapse
Hi guy, I followed your instruction, however, it still has the problem.
When I use the stock recovery to flash the beta1 package, it could not be flashed in.
lanbingxuanyi said:
Hi guy, I followed your instruction, however, it still has the problem.
When I use the stock recovery to flash the beta1 package, it could not be flashed in.
Click to expand...
Click to collapse
Hello, I am going under the beta with the message in red dm-verity for the removed I returned under original rom then I handed twrp then rom custom
card13 said:
https://source.android.com/security/verifiedboot/
In a nutshell, extra security on the boot partition to "ensure chain of trust" one of the possible requirements for Android Pay backend.
********EDIT***********
This method didn't work on the newest beta, and the OP3T ToolKit way has never worked for me on any version of OOS.
Click to expand...
Click to collapse
PaKii94 said:
I see thanks. I guess it doesn't matter to me cause I haven't started using android Pay and since I'm rooted currently
Click to expand...
Click to collapse
I'm running 7.0 stable, unlocked bootloader and dm-verity warning. Android Pay still functions with the workaround.
I attempted to apply the Oreo OTA using the guide here however it ended in a bootloop. I used fastboot to boot into TWRP (I don’t have it flashed) and switched to slot A and booted into it, where I got a message saying that decryption was unsuccessful (example). I used this to perform a reset, which worked so I guess this is a way to recover from a failed OTA, but does this reset both partitions and will I now be able to successfully apply the Oreo OTA? I have no interest in getting root back...
Thank you!
jglass071 said:
I attempted to apply the Oreo OTA using the guide here however it ended in a bootloop. I used fastboot to boot into TWRP (I don’t have it flashed) and switched to slot A and booted into it, where I got a message saying that decryption was unsuccessful (example). I used this to perform a reset, which worked so I guess this is a way to recover from a failed OTA, but does this reset both partitions and will I now be able to successfully apply the Oreo OTA? I have no interest in getting root back...
Thank you!
Click to expand...
Click to collapse
Same here. I am trying to solve this issue.
Mahbub Supriyo said:
Same here. I am trying to solve this issue.
Click to expand...
Click to collapse
After I got this message I reset the phone using the prompt on the "decryption unsuccessful" screen, then later I could apply Oreo OTA when it arrived. It seems to reset everything.