Hi I've been trying to root my S5 on Marshmallow 6.0.1 with little success. Having tried more than several times with Odin 3 as instructed in several guides, but all I've managed to achieve is a the addition of a boot message indicating that I've tripped KNOX; TWRP and ROM Manager tell me I'm not root!
I've rooted earlier versions of the Galaxy S, but to be fair I'm a little out of the loop. Could some kind soul help me out?
Uncheck "Auto Reboot" in ODIN
Copy SuperSU 2.71 beta to your phone/SD
Code:
https://mega.nz/#!2N4kECQb!Tjj5Q1VcQMU7TJ83MaTrtzdUeZsXBPZqgAtyl4qDXD8
Flash TWRP 3.0.0.0 or 3.0.2.0 with ODIN 3.10.7 (Newer versions of TWRP are broken)
TWRP 3.0.2.0
Code:
https://dl.twrp.me/klte/twrp-3.0.2-0-klte.img.tar.html
ODIN 3.10.7
Code:
https://mega.nz/#!vcIGmBTQ!Yr00OrGvUslQouU9E-zPf4SmpyVwL7mwIjeSG-0EAZg
When it's finished flashing, disconnect USB and pull the battery to power off
Replace battery and Boot immediately into TWRP and flash SuperSU
Reboot (Say no to any offer of rooting by TWRP if asked after already flashing manually)
*Detection* said:
Uncheck "Auto Reboot" in ODIN
Copy SuperSU 2.71 beta to your phone/SD
Code:
https://mega.nz/#!2N4kECQb!Tjj5Q1VcQMU7TJ83MaTrtzdUeZsXBPZqgAtyl4qDXD8
Flash TWRP 3.0.0.0 or 3.0.2.0 with ODIN 3.10.7 (Newer versions of TWRP are broken)
TWRP 3.0.2.0
Code:
https://dl.twrp.me/klte/twrp-3.0.2-0-klte.img.tar.html
ODIN 3.10.7
Code:
https://mega.nz/#!vcIGmBTQ!Yr00OrGvUslQouU9E-zPf4SmpyVwL7mwIjeSG-0EAZg
When it's finished flashing, disconnect USB and pull the battery to power off
Replace battery and Boot immediately into TWRP and flash SuperSU
Reboot (Say no to any offer of rooting by TWRP if asked after already flashing manually)
Click to expand...
Click to collapse
Hi Detection, thanks for the advice and links. I've done as instructed but still no root!
Installing SuperSu from the Play store reports no SU binary installed, if that helps.
Any advice?
Try again, that is the exact method myself and many others with G900F use, and it works fine
Double check it does say it is a G900F in download mode
List exactly what ODIN says after the flash, and what happens after the flash and you try booting into recovery
Just saying "Still no root" isn't explaining much
*Detection* said:
Try again, that is the exact method myself and many others with G900F use, and it works fine
Double check it does say it is a G900F in download mode
List exactly what ODIN says after the flash, and what happens after the flash and you try booting into recovery
Just saying "Still no root" isn't explaining much
Click to expand...
Click to collapse
My apologies, for not being particularly verbose. I shall try again and report more detailed results. I am very appreciative of your help!
sawest said:
Hi Detection, thanks for the advice and links. I've done as instructed but still no root!
Installing SuperSu from the Play store reports no SU binary installed, if that helps.
Any advice?
Click to expand...
Click to collapse
Don't add steps I haven't listed, no need to install anything from the play store, remove what you installed and follow the steps to a T
*Detection* said:
Try again, that is the exact method myself and many others with G900F use, and it works fine
Double check it does say it is a G900F in download mode
List exactly what ODIN says after the flash, and what happens after the flash and you try booting into recovery
Just saying "Still no root" isn't explaining much
Click to expand...
Click to collapse
In Download Mode it currently states:
ODIN MODE
PRODUCT NAME: SM-G900F
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
However, upon flashing the zip file, TWRP reports "Failed to mount 'data' invalid argument"! In red, perhaps this is the reason I'm failing. Possibly it is because the internal storage was encrypted, though I though that I had unencrypted it already.
*Edit: After I had performed all of the steps, exactly as described, I tried some apps to check if I had root that is all.
Sounds like the encryption is causing the problem then, try TWRP 3.0.0.0 instead too
Otherwise factory reset and don't encrypt, then root
*Detection* said:
Sounds like the encryption is causing the problem then, try TWRP 3.0.0.0 instead too
Otherwise factory reset and don't encrypt, then root
Click to expand...
Click to collapse
Thanks, yes I had forgotten that encryption was irreversible. I wondered why removing the backup password seemed to 'unencrypt' the device a bit quickly DOH!
OK, so as I have already installed the TWRP custom recovery mode , I assume that a hard reset to factory defaults is going to be a little more involved. I'll give the earlier revision of TWRP a try first and see where that leaves me.
Once again thanks for your help and bearing with my stupidity.
Should be able to just factory reset from TWRP
Or from phone settings, and if it replaces recovery with stock, flash TWRP again
*Detection* said:
Should be able to just factory reset from TWRP
Or from phone settings, and if it replaces recovery with stock, flash TWRP again
Click to expand...
Click to collapse
No joy with either the earlier revision of TWRP, or a factory reset from the phone settings.
The phones factory reset boots me into TWRP and returns errors relating to can't mount '/data'. I also tried by recreating my initial phone backup password to see if that would help.
I'm stuck now, can't go forward and can't go back!
Any ideas on how I can proceed please?
Flash 6.0.1 stock ROM from sammobile .com with ODIN
Boot into recovery
Factory reset
Flash TWRP
Flash SuperSU
Related
Hi guys. I need help on restoring my s4 on complete stock. I messed up real hard
Here my problem. I have an i9505 s4 which is simlocked to globe philppines(mobile carrier). I tried to get rid of its booting animation because it's so annoying for me so I wanted to flash a stock rom of i9505 international version via Odin 3.07 but I rooted it first via Odin also. The time I am flashing GalaxyS4-CWM-6.0.4.4-GT-i9505 tar file, I got a fail in Odin then my S4 won't boot anymore and it says firmware upgrade encountered an issue blah blah kies. I tried to boot to recovery and that's what is also shows up. I tried to use Kies but what it does is just connecting to my device which takes forever. So I flashed a stock rom via Odin and it worked but the very problem is It's very laggy and says that process stopped responding, camera not working, status bar also not working, wifi not working. In short, all core apps are not working or just works for a minute and then stops and hang the phone. Sometimes i get a wallpaper screen(nothing else, just my wallpaper which occurs when it hangs).
Luckily I still haven't hardbricked my phone yet so I need all your help to fix it before I hardbrick it :crying::crying::crying:
Please help me how to restore my S4 to the very stock like fresh android software because I'm trying to still fix it days ago. I WILL TRY TO ANSWER ALL YOUR QUESTIONS REGARDING TO MY PROBLEM JUST PLEASE HELP ME PLEASE ! IM VERY WORRIED
You can chill. Nothing wrong with your phone and you didn't mess up anything. Things like that happen. You cannot brick your phone this way. It's almost impossible to brick it.
1. Perform factory reset in recovery.
That will probably fix it. Report back if it doesn't.
ps do not use CWM because it's outdated. Use TWRP and uncheck auto-reboot before flashing it trough Odin.
Lennyz1988 said:
You can chill. Nothing wrong with your phone and you didn't mess up anything. Things like that happen. You cannot brick your phone this way. It's almost impossible to brick it.
1. Perform factory reset in recovery.
That will probably fix it. Report back if it doesn't.
ps do not use CWM because it's outdated. Use TWRP and uncheck auto-reboot before flashing it trough Odin.
Click to expand...
Click to collapse
Is it okay to flash any build number on my s4? I just downloaded one of them "I9505XXUHOA7_OXAHOA7" and I flashed it on my phone. I tried to factory reset/wipe cache partition/ and wipe dalvik cache in cwm 6.0.4.4 touch but it always hangs and core apps are not responding. Maybe the rom is the problem? I don't know but I'll try to flash twrp and report back if it doesn't work.
I have installed TWRP and its stuck on bootloop. Tried to reset its factory settings but stuck on bootloop then cache partition and dalvik cache. I tried to install the rom via TWRP and it says installation failed. Should I download other rom ?
I just want it to make it work like what an s4 should be. Even on stock or custom rom.
cdd23 said:
I have installed TWRP and its stuck on bootloop. Tried to reset its factory settings but stuck on bootloop then cache partition and dalvik cache. I tried to install the rom via TWRP and it says installation failed. Should I download other rom ?
I just want it to make it work like what an s4 should be. Even on stock or custom rom.
Click to expand...
Click to collapse
I need more details.
- What does it say your model is when you are in download mode?
- What rom are you trying to flash?
- What is the error?
Lennyz1988 said:
I need more details.
- What does it say your model is when you are in download mode?
- What rom are you trying to flash?
- What is the error?
Click to expand...
Click to collapse
-When I boot to odin mode, what I see is:
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANT VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
-I tried to flash a stock rom but it always fails even in twrp, so I downloaded a custom rom just to try it to install but It also hangs and core apps are malfunctioning. I think all rom I install fails miserably. I think I messed up real hard because I flashed two pit files in my unit.
-There is no error code in TWRP everytime I fail installing rom. It just says error installing zip.
I really need to restore it to complete stock. Every rom I successfully install hangs and crashes core apps in my unit.
I WILL TRY TO ANSWER ANY MORE QUESTIONS BECAUSE I NEED IT TO USE NOW. PLEASE
cdd23 said:
-When I boot to odin mode, what I see is:
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANT VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
-I tried to flash a stock rom but it always fails even in twrp, so I downloaded a custom rom just to try it to install but It also hangs and core apps are malfunctioning. I think all rom I install fails miserably. I think I messed up real hard because I flashed two pit files in my unit.
-There is no error code in TWRP everytime I fail installing rom. It just says error installing zip.
I really need to restore it to complete stock. Every rom I successfully install hangs and crashes core apps in my unit.
I WILL TRY TO ANSWER ANY MORE QUESTIONS BECAUSE I NEED IT TO USE NOW. PLEASE
Click to expand...
Click to collapse
You did not mess it up. But you are still not giving enough details. What is the excact rom you are trying to flash? The excact rom you are trying to flash in TWRP?
XTE-I9505XXUEMKE-20131212184031 is the name of the zip file. From here http://forum.xda-developers.com/showthread.php?t=2265477. I can't flash it through odin and twrp
cdd23 said:
XTE-I9505XXUEMKE-20131212184031 is the name of the zip file. From here http://forum.xda-developers.com/showthread.php?t=2265477. I can't flash it through odin and twrp
Click to expand...
Click to collapse
No you cannot flash that with TWRP. You cannot flash stock roms with TWRP. You can only flash it with Odin. Besides you need to unpack that .zip file.
Keep in mind that you also cannot flash that package if you were on Lollipop.
Download a rom from here:
http://samsung-updates.com/device/?id=GT-I9505
Take this version: I9505XXUHOJ2
It doesn't matter which one. Then flash it using that guide from the link you gave me.
Wow thank you helped me alot.It worked but I have this little problem. "Unfortunately, google play services has stopped" and same as filter installer, always popping up on my screen and I can't access messaging app because it always crashes next to google play pop up. Any fix for it ? Im really grateful you helped me.
cdd23 said:
Wow thank you helped me alot.It worked but I have this little problem. "Unfortunately, google play services has stopped" and same as filter installer, always popping up on my screen and I can't access messaging app because it always crashes next to google play pop up. Any fix for it ? Im really grateful you helped me.
Click to expand...
Click to collapse
Your welcome.
Did you perform a factory reset from the recovery?
Lennyz1988 said:
Your welcome.
Did you perform a factory reset from the recovery?
Click to expand...
Click to collapse
Yes. I have factory reset it and wiped cache partition and works now perfectly. Thank you again
Good afternoon guys,
i have a big issue with my galaxy s5 SM-G900S (korean version). I bought it as a refurbished device. Knox was on 0x1 so something may have been modified.
It came with the stock (?!) android 4.4.2 from march14. I tried to update but it returned a registration error. Probably because knox is 0x1
In any case, I activated usb debugging and tried to root the phone using cfautoroot and the corresponding root file: CF-Auto-Root-klteskt-klteskt-smg900s.zip which I still assume to be the correct one.
I used odin for flashing. The device was properly connected (blue).
Everything seemed to go smooth until the phone restart when it said "recovery is not seandroid enforcing". I tried several times with both odin 3.07 and 3.09 but i cannot pass this step. I also tried the method to untick auto reboot, shut the phone down manually and boot into recovery mode but it failed.
This means I am now stuck in the bootloop. I can access download mode, but i cannot reach recovery mode. Also the phone is not recognized by the computer if i try to connect it to adb, kies etc. Odin seems to connect properly still.
Alright how should i proceed now?? My actual target is to flash a custom rom. I will need to go for a dirty flash now correct? Should I flash a stock rom with odin? If yes, which one?
Please support me a bit, I am very frustrated on this topic, especially cause I still dont realize my mistake......
Merry Christmas and greets from Bavaria, Germany.
cheeet
Flash the stock firmware to get out of boot loop. After flashing the stock firmware, everything should be working fine and booting again. Instead of using CF auto root, flash a custom recovery like TWRP and then use it to flash the SuperSU zip.
toxious651 said:
Flash the stock firmware to get out of boot loop. After flashing the stock firmware, everything should be working fine and booting again. Instead of using CF auto root, flash a custom recovery like TWRP and then use it to flash the SuperSU zip.
Click to expand...
Click to collapse
Alright, Im back to stock android 4.4.2 now. Works perfect, aside from registration. If I click on "update now" it shows: SKT-USIM required.
Can someone link a detailed guide for flashing cm13? I checked the web but i still dont entirely understand.
In any case I do not want to risk going into a tricky situation once more.....
Thanks in advance.
Greets, cheet
please i need help
i downloaded the root (but not from this website)on my note 3 (4g)
when odin finished ant type (pass) in green square my device restarted but didnt work correctly
it has 3 lines on the top left (yellow and red and blue) this:
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
and restart again and again until now
please i need help but without losting my (important notes- files)
i heard that there is a non erasable ROM can it helps?
Note: when i press Home+Power+VoiceUp the same problem occures (can't inter that mode)
just home+Power+Voice-down works and inter to root mode (whech works with odin)
thanks to all
Go to sammobile.com and download the firmware for your phone and flash it via Odin.
audit13 said:
Go to sammobile.com and download the firmware for your phone and flash it via Odin.
Click to expand...
Click to collapse
Thanks for replay audit13
but i want to ask, dose it erase the phone or not?
It will erase everything but should leave the data partition untouched. If the phone will not fully boot to the rom, you may have to perform a factory wipe in recovery.
audit13 said:
It will erase everything but should leave the data partition untouched. If the phone will not fully boot to the rom, you may have to perform a factory wipe in recovery.
Click to expand...
Click to collapse
the problem with erasing data
is there any way to keep them??
i needs my (notes) and some very important Pictures
please if you know any way help me
i did the big wrong when i didn't get backup
Data partition
can it helps me later to restore my data??
or NO WAY?
Any help please
You can root it with Kingo Root App.
Search on the Internet about this app
Reads as a failed flash to me .
Recovery wiped .
I would flash a recovery via Odin .
TWRP CWM or Philz Recovery .
ya1ss2er3 said:
Data partition
can it helps me later to restore my data??
or NO WAY?
Click to expand...
Click to collapse
Download your device specific TWRP 2.8.xx not TWRP version 3, Flash it with Odin in download mode...
I had similar issue in the past.
Download a device specific custom rom, dirty flash, connect to your computer, back up data and after that if there are force closes etc.,
Do a proper flash.
Hope this helps.
FYI., Kernel seandroid not reinforcing and Recovery seandroid not reinforcing warning appears when you run custom kernel & recovery.
Nothing to panic about. Just ignore it.
Exactly which model # do you have? Did you try flashing stock recovery?
You could try this: you could flash TWRP with Odin, boot into TWRP, mount the data partition, and pull the files from the partition.
Thanks every one
I solved the problem by reinstall cf-auto-root....
The file I downloaded was incomplete (29.7mb) but the new one is (30.6mb) it worked
thank you all.
ya1ss2er3 said:
please i need help
i downloaded the root (but not from this website)on my note 3 (4g)
when odin finished ant type (pass) in green square my device restarted but didnt work correctly
it has 3 lines on the top left (yellow and red and blue) this:
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
and restart again and again until now
please i need help but without losting my (important notes- files)
i heard that there is a non erasable ROM can it helps?
Note: when i press Home+Power+VoiceUp the same problem occures (can't inter that mode)
just home+Power+Voice-down works and inter to root mode (whech works with odin)
thanks to all
Click to expand...
Click to collapse
I get it. You have issues with recovery i guess.
Where did you buy the phone? And also where did you download the firmware? and reply the name of the firmware you downloaded (ex:N9005XXUENC2_N9005OJVENB2_KSA)
Hope we can find a solution
EDIT: Didn't see that it was fixed... xD lol
Wow...
thank you every one
i am trying to upload the file but the internet here is very slow so this is the file name may help someone
CF-Auto-Root-hlte-hltexx-smn9005.tar.md5
thank you again.
The chainfire root files can be found here: https://autoroot.chainfire.eu
audit13 said:
The chainfire root files can be found here: https://autoroot.chainfire.eu
Click to expand...
Click to collapse
i did
thanks
Hello, I need help to rooting my phone. I am currently using Samsung Galaxy S5 model number SM-G900H with Android version 5.0, Baseband version G900HXXU1BOL2 , Kernel version 3.10.9-5852541, Build Number LRX21T.G900HXXS1BPD2, and KNOX 2.3.
I've follow many tutorials on how to root my S5 but with no luck... it always get boot stuck after flashing CF-Auto-Root-k3g-k3gxx-smg900h.tar.md5 using ODIN3-v3.10.6. What else could be wrong ?
Some S5s don't like CF AR
Copy SuperSU.zip to your phone/microSD
Flash TWRP with ODIN (Uncheck Auto reboot first in ODIN)
http://forum.xda-developers.com/showthread.php?t=2725939
Once it completes the flash, disconnect the USB, and pull the battery to power off the phone
Replace the battery, and immediately boot into recovery with Volume Up & Home & Power
Flash SuperSU
Reboot (If asked to root again from TWRP after flashing SuperSU, say NO)
*Detection* said:
Some S5s don't like CF AR
Copy SuperSU.zip to your phone/microSD
Flash TWRP with ODIN (Uncheck Auto reboot first in ODIN)
http://forum.xda-developers.com/showthread.php?t=2725939
Once it completes the flash, disconnect the USB, and pull the battery to power off the phone
Replace the battery, and immediately boot into recovery with Volume Up & Home & Power
Flash SuperSU
Reboot (If asked to root again from TWRP after flashing SuperSU, say NO)
Click to expand...
Click to collapse
Thank you for your assist... i will try it and post the results here... Should i use the last version of Odin and SuperSU anyway ?
Yep, use the latest versions
*Detection* said:
Yep, use the latest versions
Click to expand...
Click to collapse
I did all the step above but after flashing twrp-k3gxx.tar , remove the battery and entering recovery mode, nothing is change there, it just entering the original recovery mode. Do twrp-k3gxx.tar is the correct version for my SM-G900H ?
*Detection* said:
Yep, use the latest versions
Click to expand...
Click to collapse
frenxl said:
I did all the step above but after flashing twrp-k3gxx.tar , remove the battery and entering recovery mode, nothing is change there, it just entering the original recovery mode. Do twrp-k3gxx.tar is the correct version for my SM-G900H ?
Click to expand...
Click to collapse
What happen if I just flash SuperSU directly via ODIN ?
Did you put the phone in download mode, and did ODIN show a connected COM port at the top?
Did it say successful flash?
Try leaving Auto Reboot checked and do it again, let the phone reboot, and then try booting into recovery
You can't flash SuperSU from ODIN, it's a zip file, not an ODIN flashable .md5 or .tar
*Detection* said:
Did you put the phone in download mode, and did ODIN show a connected COM port at the top?
Did it say successful flash?
Try leaving Auto Reboot checked and do it again, let the phone reboot, and then try booting into recovery
You can't flash SuperSU from ODIN, it's a zip file, not an ODIN flashable .md5 or .tar
Click to expand...
Click to collapse
Yes I did put the phone in download mode, and ODIN show a connected COM port, i know how to used it and succesfully flashing the twrp-k3gxx.tar, pull the batt out and back in, boot in to recovery mode and nothing is happen... i just entering the stock recovery mode. it is like something overwrites the custom recovery right just before the phone boot up.
I think it is likely that Root image doesn’t seem to worked with the newest Android software update version, or maybe Samsung might also try to released some patches to the Android system that might prevent from customizing ?
I also tried to flasing CF-Auto-Root-k3g-k3gxx-smg900h.zip but it soft-break my phone so i have to flashing back to stock rom (luckyly i have download it before)
Stuck with the same issue. Plenty of Auto Root tutorials are available. Each one specifies that tutorial is exclusive to particular model number. G900HXXUIBOL2 is my build number. Once installed CF Auto Root. When verified via Root Checker, it showed success and got root access !!..But Couldn't enter recovery mode since then..was getting stucked in boot loop when trying to enter recovery mode. Had to restore stock ROM...Really frustrated with Samsung's UI. Wish I could change to Cyanogenmod..Any help would be really appreciated..Thanks in Advance
I am still having hope I can recover my bricked Tab A. If there are any other suggestions than what I have tried, I would love to know!
I have attempted flashing, multiple times, stock ROMs, custom ROMs, stock boot and recovery files, CF Autoroot all unsuccessful at getting to boot.
:crying:
I can only boot into Download mode:
Product Name: SM-T580
FRP Lock: Off
System Status: Custom
Current Binary: Custom
Secure Download: Enabled
Warranty Void: 1 (0x0500)
AP SWREV: B:-1 K:1 S:2
I can flash the T580UEU4CRK5_T580XAR4CRK7_XAR AP and CSC Files but not the Bootloader curiously.
I can flash twrp-3.2.3-4-gtaxlwifi-OMNI6 but the device will not boot into Recovery Mode. (couintless attempts.)
I was hoping if I could get into TWRP then I could wipe the cache etc. but attempts have been fruitless.
I am all out of ideas.....
Flutterfly said:
I am still having hope I can recover my bricked Tab A. If there are any other suggestions than what I have tried, I would love to know!
I have attempted flashing, multiple times, stock ROMs, custom ROMs, stock boot and recovery files, CF Autoroot all unsuccessful at getting to boot.
:crying:
I can only boot into Download mode:
Product Name: SM-T580
FRP Lock: Off
System Status: Custom
Current Binary: Custom
Secure Download: Enabled
Warranty Void: 1 (0x0500)
AP SWREV: B:-1 K:1 S:2
I can flash the T580UEU4CRK5_T580XAR4CRK7_XAR AP and CSC Files but not the Bootloader curiously.
I can flash twrp-3.2.3-4-gtaxlwifi-OMNI6 but the device will not boot into Recovery Mode. (couintless attempts.)
I was hoping if I could get into TWRP then I could wipe the cache etc. but attempts have been fruitless.
I am all out of ideas.....
Click to expand...
Click to collapse
Try this thread https://forum.xda-developers.com/galaxy-tab-a/themes/mod-twrp-odin-t3650215 . And if you come to recovery do factory reset. Then reboot. Maybe help.
Thanks, I started reading this thread last night and attempted to download but the mirrors didn't work.
Download
[2x1]MOD_SM-T580XXU4CRK5_with_twrp-3.2.3-4-gtaxlwifi_and_patched_boot_with_disabled dm-verity, forced encryption disabled, Selinux permissive _without_CSC.zip
for the Samsung Galaxy Tab A 10.1 (2016)(SM-T585), by repey6
response: dc3.androidfilehost.com sent an invalid response.
Can you check the links? Thanks again!
Flutterfly said:
Thanks, I started reading this thread last night and attempted to download but the mirrors didn't work.
Download
[2x1]MOD_SM-T580XXU4CRK5_with_twrp-3.2.3-4-gtaxlwifi_and_patched_boot_with_disabled dm-verity, forced encryption disabled, Selinux permissive _without_CSC.zip
for the Samsung Galaxy Tab A 10.1 (2016)(SM-T585), by repey6
response: dc3.androidfilehost.com sent an invalid response.
Can you check the links? Thanks again!
Click to expand...
Click to collapse
Links work. Change your browser.
I use chrome, latest version/ any other suggestions? I can get your other links to download
Got it thank you! Stupid antivirus
Thanks Repey6 for your assistance, The device still will not flash a bootloader file. Any ideas what could be causing this failure or if it's fixable?
The process fails at the write phase "param.bin".
Flutterfly said:
Thanks Repey6 for your assistance, The device still will not flash a bootloader file. Any ideas what could be causing this failure or if it's fixable?
The process fails at the write phase "param.bin".
Click to expand...
Click to collapse
2nd entry at DuckDuckGo:
https://forum.xda-developers.com/galaxy-s3/help/odin-flash-sboot-bin-param-bin-nand-t3546535
Does flashing CF-AutoRoot succeed?
No,
virsys said:
2nd entry at DuckDuckGo:
https://forum.xda-developers.com/galaxy-s3/help/odin-flash-sboot-bin-param-bin-nand-t3546535
Does flashing CF-AutoRoot succeed?
Click to expand...
Click to collapse
When I tried autoroot, I get a PIT file error. and it fails.
Flutterfly said:
When I tried autoroot, I get a PIT file error. and it fails.
Click to expand...
Click to collapse
Providing screenshots of Odin's process in the different scenarios (flashing stock, custom, twrp, autoroot) / logs would help.
Could be a hardware damage as well. Then you will have to RMA it.
Flutterfly said:
Thanks Repey6 for your assistance, The device still will not flash a bootloader file. Any ideas what could be causing this failure or if it's fixable?
The process fails at the write phase "param.bin".
Click to expand...
Click to collapse
Your device is showing a bootloader revision of -1.
This is incorrect. Which is why you're having issues flashing any boot loader.
Something similar happened to another member who ended up with a rev -2 bootloader and had similar issues on another device.
He managed to fix it after some messing and got it booting again.
If I find the thread I'll post it.
https://forum.xda-developers.com/galaxy-tab-a/help/help-tab-t380-oreo-flashing-t3857266
This is what I have done before successfully with a different Samsung Galaxy Tablet and I unbricked that particular tablet. I used Kies to restore the original stock ROM to the tablet and I re-rooted it by using Odin and flashed the correct TWRP to the tablet. If you can get TWRP to work on anything I'd have to say that your technically rooted even without Supersu or Magisk.