I just bought the new T-Mobile (USA) MDA a couple days ago, a version of the HTC Wizard.
I have been able to connect with GPRS/EDGE, and seem to be getting EDGE speed, which is nice (my first EDGE phone).
However, no such luck with Wi-fi.
At my house, I can easily connect, at all times, with a few different wi-fi networks, with my wi-fi enabled laptop, and with my older PPC--an IPAQ 2210, with Spectec SDIO Wi-Fi card, can browse the web via Wi-Fi, etc.
The MDA does connect to Wi-FI, appears to be connected to it. (After turning it on in Connection Manager, of course.) But I cannot access any web sites with it. On trying to do so with PIE, I always get the error message:
"The page cannot be displayed or downloaded because the connection was lost, Check the connection and try again later."
I have not once been able to access one web site via Wi-Fi, with the MDA.
Can anyone help with this?
Thank you.
I ahve the same problem and have not figured out how to solve this...
Can anyone help us?
same problem here, also with t-mobile as provider. can it be a problem related to t-mobile???
me said:
I just bought the new T-Mobile (USA) MDA a couple days ago, a version of the HTC Wizard.
I have been able to connect with GPRS/EDGE, and seem to be getting EDGE speed, which is nice (my first EDGE phone).
However, no such luck with Wi-fi.
At my house, I can easily connect, at all times, with a few different wi-fi networks, with my wi-fi enabled laptop, and with my older PPC--an IPAQ 2210, with Spectec SDIO Wi-Fi card, can browse the web via Wi-Fi, etc.
The MDA does connect to Wi-FI, appears to be connected to it. (After turning it on in Connection Manager, of course.) But I cannot access any web sites with it. On trying to do so with PIE, I always get the error message:
"The page cannot be displayed or downloaded because the connection was lost, Check the connection and try again later."
I have not once been able to access one web site via Wi-Fi, with the MDA.
Can anyone help with this?
Thank you.
Click to expand...
Click to collapse
I have exactly the same problem
I guess you could try going under "Settings" "Connections" "Network Card" and make sure your network card is set to connect to "The Internet"
Select your wireless card and then make sure the drop down says "The Internet" and hit ok.
Also, make sure your GPRS Connection settings aren't setup to use T-Mobile's proxy. When your gprs is setup to use a proxy for web browsing, PIE will attempt to use the proxy with any connection. And by proxy, I'm not talking about an APN or anything.
Are you running security on your router? If so try shutting it off to test or try to connect to someone elses WiFi network to test.
wagz said:
I guess you could try going under "Settings" "Connections" "Network Card" and make sure your network card is set to connect to "The Internet"
Select your wireless card and then make sure the drop down says "The Internet" and hit ok.
Click to expand...
Click to collapse
I spoke with a TMob customer service rep about this a couple weeks ago, and this is basically what he told me to do. A T-Mobile HotSpot (Starbucks, etc) should work without making any changes. But if you want to use your own WiFi connection, you have to do the following:
Start Menu -> Settings -> Connections Tab -> Connections Icon
Select Advanced Tab -> Select Networks
Change first dropdown to "My Work Network".
Click OK, OK.
Then when you want to roam with GPRS/EDGE again, you have to change it back to "T-Mobile GPRS".
Very annoying to say the least. If anyone knows a better way to do this, I'd love to hear about it.
This works for me:
Start Menu -> Settings -> Connections Tab -> Connections Icon
Select Advanced Tab -> Select Networks
Change the first dropdown to My Work Network
Change the second dropdown to T-Mobile GPRS
Make sure My Work Network is set to connect to the internet, but has NO proxy settings.
Make sure T-Mobile GRPS is set to connect to the internet, but HAS proxy settings.
Magic!
frycow, you rock!!
That worked perfectly!! I hated that I had to keep switching networks whenever I wanted to go online via GPRS or wifi!!
Thanks!!!
frycow,
wow. that sounds great. but I can't get it working. could you take a couple minutes to walk me (and I'm sure others too) through your exact settings? especially the proxy settings.
thanks!
frycow is a freakin champ....that did the trick!! I've been WAITING to get this working!!
AHHHH, AND IT FINALLY GOT MY POCKET MSN TO START WORKING TOO!!!! Still doesn't work on GPRS, but it certainly works on Wi-Fi!! I suppose the last thing would be to get it working on both!! regardless, this is SWEET!!
I can´t get it working :evil:
When I Change the first dropdown to My Work Network and after that tryn to sync without having wifi enabled, the device does not connect with GPRS..., solutions...
frycow, hazchem, djswivel:
Could one of you help out Paltkugen and I? Both of us can't get it working. If you could let us know the specific settings, including the proxy settings, I would really appreciate it. Its so frustrating to know it works for some people, but not being able to get it going.
Thanks!
I did EXACTLY what fry posted....follow this carefully
Start Menu -> Settings -> Connections Tab -> Connections Icon
Select Advanced Tab -> Select Networks
Change the first dropdown to My Work Network
Change the second dropdown to T-Mobile GPRS
Click Edit on the My Work Network dropdown -> Proxy Settings Tab
Check the first box (This network connects to the internet), but NOT the second (This network uses a proxy server to connect to the internet)
Now do the same for the T-Mobile GRPS settins in the edit menu, only check both boxes this time. Then type in 216.155.165.50 as the proxy server. From there you should be good.
djswivel said:
I did EXACTLY what fry posted....follow this carefully
Start Menu -> Settings -> Connections Tab -> Connections Icon
Select Advanced Tab -> Select Networks
Change the first dropdown to My Work Network
Change the second dropdown to T-Mobile GPRS
Click Edit on the My Work Network dropdown -> Proxy Settings Tab
Check the first box (This network connects to the internet), but NOT the second (This network uses a proxy server to connect to the internet)
Now do the same for the T-Mobile GRPS settins in the edit menu, only check both boxes this time. Then type in 216.155.165.50 as the proxy server. From there you should be good.
Click to expand...
Click to collapse
That is exactly what I did too. Just tried it again and I can't use GPRS to surf. I have Wifi turned off. GPRS is not connected. I open PIE and go to some URL (google.com). GPRS starts connecting and successfully connects to T-Mobile GPRS.
Then, for about 30-60 seconds, the status bar says "Locating". Then an alert pops up that says "The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later."
Next, I turn on WiFi. It conects to my local WiFi network. It is still connected to T-Mobile GPRS too. I go back to PIE. As soon as I try to goto a URL, the GPRS connection drops, and again it says "Locating..." for a while. Then the same alert pops up again.
So now that GPRS isn't connected and just WiFi, I try going to the URL again. Same results.
Next I try turning off WiFi. Now there are no connections. I restart WiFi and there is just a WiFi connection. Same results in PIE.
I thought maybe the proxy is the problem, so I turned off the proxy in GPRS. When I do this, the checkbox "This network connects to the internet" won't stay checked. Even if I check it and click ok, when I go back it is unchecked. And when I did this, I couldn't even connect with GPRS. And with WiFi on, it would connect to Wifi, but going to a page would immediately pop up an alert that says "Cannot Connect with current connection settings. To change you connection settings, tap Settings."
I added the proxy back in and then tried changing the GPRS access point name from wap.voicestream.com to internet2.voicestream.com and internet3.voicestream.com. internet2 wouldn't even make a connection, but internet3 did. however, i still couldn't locate pages in PIE. So I changed it back to wap. I think my unlimited GPRS plan is configured the VPN way, so I remember having to use internet2 or internet3 in the past.
Could the proxy server not be working right for me? Is it possible that I cannot locate the proxy because I'm configured in a non-standard way (with a different access point - internet3) than most?
I think I'll call tmo and see if I can get changed to the regular AP (wap). I'm not using VPN stuff right now anyway. If anyone has other ideas, please let me know.
Thanks again!
I think i have a work around. but involes changing it back and forth when switching btwn wifi and gprs..
created two connections.
one with proxy and one without.
im only able to surf gprs with proxy.
when connecting via GPRS set both networks to connect to PROXY.
when using WiFi, set both networks to connect using NOPROXY.
that should work. at least it worked for me. tried only 2 pages and it loaded for both. GPRS used myvoicestream and wifi google.
yowzator said:
I have Wifi turned off. GPRS is not connected. I open PIE and go to some URL (google.com). GPRS starts connecting and successfully connects to T-Mobile GPRS.
Then, for about 30-60 seconds, the status bar says "Locating". Then an alert pops up that says "The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later."
Next, I turn on WiFi. It conects to my local WiFi network. It is still connected to T-Mobile GPRS too. I go back to PIE. As soon as I try to goto a URL, the GPRS connection drops, and again it says "Locating..." for a while. Then the same alert pops up again.
So now that GPRS isn't connected and just WiFi, I try going to the URL again. Same results.
Next I try turning off WiFi. Now there are no connections. I restart WiFi and there is just a WiFi connection. Same results in PIE.
I thought maybe the proxy is the problem, so I turned off the proxy in GPRS. When I do this, the checkbox "This network connects to the internet" won't stay checked. Even if I check it and click ok, when I go back it is unchecked. And when I did this, I couldn't even connect with GPRS. And with WiFi on, it would connect to Wifi, but going to a page would immediately pop up an alert that says "Cannot Connect with current connection settings. To change you connection settings, tap Settings."
I added the proxy back in and then tried changing the GPRS access point name from wap.voicestream.com to internet2.voicestream.com and internet3.voicestream.com. internet2 wouldn't even make a connection, but internet3 did. however, i still couldn't locate pages in PIE. So I changed it back to wap. I think my unlimited GPRS plan is configured the VPN way, so I remember having to use internet2 or internet3 in the past.
Click to expand...
Click to collapse
Earlier today I had been trying to get VM Net Browser or Resco File Explorer to work, and they *were* working, albeit very sporadically. Sometimes I could see whole windows network complete with shared files and directories, other times I could browse to my computer and it wouldn't show anything as being shared. Looking for a solution, i found this thread.
I followed the recommendations of the previous posts and got exactly the same results as yowzator, including the weird thing with the "This network connects to the internet" checkbox unchecking. My GPRS access point is also named wap.voicestream.com - not sure if that matters.
However, I know that I was having at least partial wi-fi success before trying this fix or I wouldn't be able to have seen my home network. So I gave up on this fix and put everything back to the default - GPRS for programs that automatically connect to the internet, no proxy, and My Work Network for programs that automatically connect toa private network, with "This network connects to the internet" unchecked because it's impossible to check it and expect it to stay checked.
I tried surfing around to a few pages with wifi only (connections shows me connected to my network, I turned off the phone icon in the comm settings, and tapping on the connectivity icon on the taskbar didn't have GPRS listed) and amazingly, some of them worked - though the "locating" process seemed to take a while, they sometimes seemed to load faster than with GPRS (especially if I let my MDA go to sleep and then turn it back on again).
And then they don't work again, without me doing anything. So I don't think the fix we've been trying is a true fix to the problem - if it was then then pages would *never* load with the proxy disabled. Right?
I've been wondering if the "modem" tab under My Work Network is supposed to be blank . . . even if it's using wifi it seems like a poor UI design to not have a checkbox or something saying "this connection is for wifi and not dialup".
I am using the 2.17 ROM update. My wireless router is a D-link DI-624 extreme g. I'm using WEP encryption.
I am crying . . . tears . . . of confusion.
SOLUTION!?
This works for me (suggested in another thread):
1. Add the following to the registry:
HKEY_LOCAL_MACHINE\COMM\TIACXWLN1\PARMS:
DWORD dot11SupportedRateMaskG=8
(Note that there is already a key in the registry called "HKEY_LOCAL_MACHINE\COMM\TIACXWLN1\PARMS: DWORD dot11SupportedRateMask=1" - you should leave this alone)
2. Do a soft reset.
3. Go to your wi-fi settings -> Power Mode tab -> Best Performance (without this step it didn't work for me)
4. Turn on wi-fi and connect to anything in internet explorer. It should seem blazing fast compared to GPRS.
Note that this assumes you haven't done any of the fixes in this thread. That is to say, leave it with GPRS for programs that automatically connect to the internet (with no proxy), and My Work Network for programs that automatically connect to a private network, with "This network connects to the internet" unchecked because it's impossible to check it and expect it to stay checked.
So far (for a few minutes anyway) this is working for me! Even Resco File Explorer seems to mostly work - I can map my PC's shared folders and see my stuff reliably, as far as I can tell. VM Net Browser is still wonky though.
The thread this solution comes from is http://forum.xda-developers.com/viewtopic.php?t=38898&start=0&postdays=0&postorder=asc
Hi,
tried that solution
(I have a thread below)
still falls over on "locate".
I have no home network so I have never got anything working - connects fine on a public hotspot, but as I say, fails on locate.
I've had enough - may either phone T-mobile pay CS - something I really don't want to do out of principle - or just send teh phone back.
any new info on this? can seem to get it to work.
i have configures it many ways as suggested above. only time i was able to browse on wifi was with no proxie was set up. i connect through another network, (the mda automatically hooks you up to all avalible networks) but that only lasted a few minutes.
is there even a chance i could someone at tmobile even help me??? anyone here call them and get got service/help with getting it to work?
thanks
skot
I'm sorry... I've searched the forum using a few different keywords and can't find exactly how to do this. I did see a posting on "MoDaCo_NoData" but it seems to crash on my Tytn (installs but errors after it runs).
I have downloaded the official HTC WM6 Rom update and have that installed now. I'm just reading up on the hacked roms (Black Majik)... might try it in a week or two.
I know on WM5 if I didn't enable WiFi and by mistake ran IE, it downloads the data from the cell network, which is definately NOT what I want. Worse, if for some dumb reason, Wifi is a low signal, it might drop and push you onto the cell network for data, which has happened to me a few times now and unless you are paranoid (I am now), you never notice that it's slipped onto cell data network. It's starting to cost me a fortune.
Any assistance would be appreciated.
Just change the settings for your gprs data connection so they are incorrect and then wont connect to the network, easily done .
Start/Settings/Connections/Connections/Advanced/Select Network
Select My WORK NETWORK
Some clarification needed...
Just change the settings for your gprs data connection so they are incorrect and then wont connect to the network, easily done .
Click to expand...
Click to collapse
Sorry... where do I do that exactly? If I go to connections, click on "GPRS Setting" it asks me is I want to use PAP or CHAP... nothing else.
As well, I forgot to mention I did get a Tytn for my wife as well, so would be nice if there was a program or simple step to enable/disable and easy for the wife to use.
Start/Settings/Connections/Connections/Advanced/Select Network
Select My WORK NETWORK
Click to expand...
Click to collapse
Thanks, doing this brings up "Network Managment" with two items on screen to choose.
1. Programs that automatically connect to the internet should connect using:
Options: a) My ISP
b) My Work Network
Edit / New
2. Programs that automatically connect to a private network should connect using: Options:
a) My Work Network
b) My ISP
If I do item 1 above, and change it to My Work Network, then I can no longer access web sites via WiFi. Which is what I'd like to do, just use WiFi, no other wireless data transfers via the cell carrier.
Thanks for your help and any clarifications..
You are facing errors with your Modaco Nodata because you haven't setup any data connection (3G or GPRS) to your provider. Try setting it up and running Modaco Nodata again.
It works a breeze for me. But then again, if you don't have any connections setup, you shouldn't worry about anything in fact.
cmariotti said:
Sorry... where do I do that exactly? If I go to connections, click on "GPRS Setting" it asks me is I want to use PAP or CHAP... nothing else.
As well, I forgot to mention I did get a Tytn for my wife as well, so would be nice if there was a program or simple step to enable/disable and easy for the wife to use.
Thanks, doing this brings up "Network Managment" with two items on screen to choose.
1. Programs that automatically connect to the internet should connect using:
Options: a) My ISP
b) My Work Network
Edit / New
2. Programs that automatically connect to a private network should connect using: Options:
a) My Work Network
b) My ISP
If I do item 1 above, and change it to My Work Network, then I can no longer access web sites via WiFi. Which is what I'd like to do, just use WiFi, no other wireless data transfers via the cell carrier.
Thanks for your help and any clarifications..
Click to expand...
Click to collapse
When you go to Connections/Connections/Advanced/Select Network/and select My Work Network, click EDIT then click on the Proxy Settings tab and check this network connects to the internet....
Simply go into the network settings area (the same area people have noted above) and remove every connection other than your wi-fi.
Poke around, you'll figure it out.
Even easier
Call your carrier and disable data to that phone. Then there are NO worries that you accidentally change a setting and get a big bill as a result.
Maybe you can use CommmgrPro
http://forum.xda-developers.com/showthread.php?t=299070
or
www.commgrpro.com
I use WiFi when ever and havent ever had fees................
Once I tried to connect the free wifi on Atlanta airport. Since then my ATT 8525 randomly displays this message "There is a problem connecting to the GPRS service in your registered home network.
Just FYI, I do not ATT internet subscription.
I can receive text messages and calls as usual but today when I tried to sync my phone with my laptop, it gave errors like make Outlook express as your default mail server.
I cannot sync my phone to my laptop which was possible until I started getting the GPRS messages.
Please help me.
Check your selected network and see by changing it to correct network settings. I am not sure if it is going to resolve your problem or not.
I'm having the same problem.
I do not have a GPRS service.
I do not need it because i use WIFI.
Can i make wifi my only data connection with the HD2?
thnx
go to settings>connections>connections
the touch manage connections and delete the default tmobile gprs setting by touching it and holding til delete come up.
Just fyi,
I was facing this problem, and iiodii's solution worked fine, or simply :
Go to settings > Connections > Connections > Advanced > Select Networks >
Check both options to 'My Work Network' or any network other than your Mobile provider connection.
An advise "Just for users who will reach this topic" (I did through Google )
This didn't work. I'm having the same problem: GPRS not working when I try to send/receive MMS, and it all started after I started using wifi. Should I flash the radio?
I have Hermes 200- two years ago I had the same problem-this is what I did: went to the WIKI and downloaded "network settings" for my phone (cab) and loaded directly to my phone, soft reseted and that was it. Savy!?!!
sorry to hear that.good luck to u .
Go to phone and then menu and then options and go to BAND, don't choose auto but chose GSM OR CDMA both of them. Hope it will help all of you.
Connection works using wlan, but never using data connection...why?
Bence said:
Connection works using wlan, but never using data connection...why?
Click to expand...
Click to collapse
most likely your network operator has blocked the ports necessary to use IM on their network
Try this:
Go to settings-wireless controls-menu-connections-advanced and then choose Select Networks.
Once you're under Select Networks, try out the options under "Programs that automatically connect to the Internet should connect using:" For example in order for me to be able to connect to live messenger regardless of my network environment, I have to choose the "Orange internet" option (default is Orange MMS). The options for you will be different of course, based on your carrier.
Hope this helps,
[email protected]
I had the same problem, in my case proxy server was enabled and that caused my problem. When I turned it off it worked
ilhantug i will try this
xforcenl, if i turn this proxy off, everything else will work like before or...?
in my case yes, but if other programs are reacting strange, re-download standard settings of your provider