If anyone is having issues with their volume panel not timing out after a few seconds, go into settings > accessibility. Turn off moto voice. Now check it by pressing your volume key and waiting. Mine now properly times out. Unfortunately, you lose the use of moto voice. For some of you, I'm sure that's unacceptable. Touching anywhere outside the volume panel will also make it go away (when moto voice is on under accessibility). For now, I know of no way to fix this issue. Hope this helps some of you!
**UPDATE 5/18/2016**
If you happen to use Xposed, you can keep moto voice on and download the module called "volume slider delay fix for marshmallow". This will allow all to work as it should (including keeping moto voice on)!
Sent from my Moto xpe running TruPureXMM
Same here, in games!
Thanks. I noticed this behavior started seemingly at random. Looking back on it, it started happening when I decided to try Moto Voice, which I have since turned off except for the accessibility service. That did the trick. Not a big deal as you said, you can dismiss it by touching anywhere on the screen, but since I don't need Moto Voice anyway, it's nice to have it behaving normally.
i had this and have only just realised since i factory reset its stopped doing it.
does same thing to me
Sent from my XT1575 using Tapatalk
Related
I got my Focus Friday and have been using it a lot since. This morning, it seems like the capacitive button feedback is much weaker; it's barely noticable when I press the button.
Notification vibrate seems fine as far as I can tell, and I don't care much about the buttons. I'm just curious about
A) Has anyone else experienced this, and
B) Could this lead to other vibration problems?
Thanks.
I seem to have the same problem. In fact, all vibration has gotten weaker. I am guessing it has something to do with dust? perhaps dust is jamming the vibration motor.
Yes!
I have this problem as well and from what I can tell, it's definitely not dust-related. My guess is it's some kind of firmware issue. I've done a hard reset of the phone (AT&T's stupid suggestion) and that didn't help at all. They tried to tell me it was because "I have so many apps installed and they can affect the functionality of the phone"...BS.
If you go into the Diagnosis App, the button presses are MUCH stronger like they should be. Enter ##634# in dialer and then call. Then enter *#0842# to go to the Vibration Test. I did this a selected "Vibrator On" then exited. This fixed my problem for about a day, then it came back. I've talked to AT&T 3 times about this and finally got to an Escalation Officer. I have to go to the store now so they can "verify" and probably tell me it's fine. The people on the phone said it's still vibrating so "technically it works," which is ridiculous.
I would try this troubleshooting stuff first if I were you to see if it helps but it was a temporary fix for me. I miss a ton of messages and calls when my phone is on silent because of this. The phone isn't working properly so this is a warranty fixable problem in my opinion. Good luck.
This happened to my focus in winter night, when it became cold the vibration didn't work properly. But after some time (and several restart) it's worked as normal
I have a problem with Moto Display. It worked before properly, but now it's getting stuck while swiping down. The circled lock symbol stays in the bottom. I have to press power button to unlock it. Any ideas? Thanks.
I haven't experienced that. I have a bug of my own likely involving the Moto app when I go into driving mode. Sometimes my ring tone volume goes all the way down and I can't raise it unless I reboot. I think they definitely have some kinks to work out. Kind of disappointing since I love the phone otherwise. I hate to return it.
Sent from my XT1575 using Tapatalk
Ok, I solved it. I deactivated Amplify and now it works. I had to block something wrong I guess
Loving my new Moto X Style (Aust).
Love the phone. Only have some slight annoyances. Wondering if people can help:
I love the Moto/Ambient display and as I wave my hand or pick up the phone it bring up the lock screen and notifications. That happens normally. When on a call that doesn't happen. When I need to enter something into the number pad or eg mute/un-mute the screen stays dark and I seem to need to push the power button. Is there a way around this? I don't want to have to push the power buttom to mute/un-mute while on a call.
now on MM 6.0.1, the moto events has moved to Android Settings - Sound & Notifications - Do Not Disturb......i want to set the phone to only vibrate when I have a meeting in the calendar. This option only let's me put DND on which is complete silence (other than priority. But I want all calls and notiication to only be vibrate not silent.
For some reason I just cannot get the Moto Action (chop chop) to turn on Flash light no matter how many times I try. Doulbe twist for Camera works fine.....What do i do?
What do people do about Moto Voice (OK Moto X) and Google voice induced search (OK Google)....do they use either one or the other or can both be on?
When charging the charging screen goes on. And everytime I want to get back into the phone, the charging screen is what's first presented. I don't care about charging nor want to have to dismiss that charging screen every time. How do I get rid of it as the primary entry screen while charging?
Thanks.
I have a problem with my unrooted Marshamallow X Force in that when I am in a call on the speakerphone/hands free the screen will go to sleep after a moment and I cannot wake it up other than by pressing the power button (No sensor detection or screen swipe). Is there any way to either disable the sleep mode during hands free calls or a way to get the screen to come back on without having to press the power button?
EDIT: OK I've found the attentive display thing but if I am looking slightly away like looking at my computer display it loses my face and sometimes I wander around during a call. I will see how it goes.
EDIT:2 Bah! It's not helping. Anyone got any ideas?
+1 It happened To me while on bluetooth headset,very annoyed.
Sent from my XT1580 using Tapatalk
There is no way to change this behavior that I know of. I also find it annoying.
Sent from my XT1585 using Tapatalk
On another hand, behavior is logical. To save battery, screen goes off. The same is with normal calls. Only problem is that attentive display/proximity sensor is not turning it on.
Try to suggest Moto on official forum or under Moto app on market to implement that.
I have a Moto G6 Plus Dual Sim and would like to know if I can adjust the Call/Notification Volume on my phone with the button on the side of the phone.In the information supplied this button is set by Default to Media and what I want to do is change the Media for the Call/Notification Volume so I don't have to go into the settings and adjust the sliders.This is a pain every time I wish to alter the Volume of my Notifications as on my old Moto G5 I was able to control the Volume from the side button.Any help would be gratefully received.Many thanks Sethnettles.
Yes, the pie update has changed the volume button function. There is a sound on/off/vibrate button on top when using the volume rocker but that's it... I haven't found a way to change it. I really cannot understand why such basic functionality that has "always" been available in Android has been taken out!
Volume Button on MotoG6 Plus
Knutselmaaster said:
Yes, the pie update has changed the volume button function. There is a sound on/off/vibrate button on top when using the volume rocker but that's it... I haven't found a way to change it. I really cannot understand why such basic functionality that has "always" been available in Android has been taken out!
Click to expand...
Click to collapse
Good Morning, Many thanks for your reply and now I have got this sorted can you help me with another problem??I used to receive an Audible and Vibration alert for both my Call/Notifications eg:-E-Mail etc but now I only get an Audible Ringtone for both.I have been into settings and the Vibration is Turned ON I have also been into the Moto Help and Hardware Test and tested the Vibration which works fine is there any other settings or something else that I should turn on which I possibly have either mistakenly turned off or missed altogether???I have tried all the Icons when the Volume Button is pressed and I can turn OFF and ON both the Audible and Vibrate and both are OK as is the Call/Notification Volume so all I require is for Both Audible and Vibrate to work when I receive either a Call or E-Mail??Hope you can help,Regards,Sethnettles.
I believe that it has to be set for each application individually, in the settings menu of the application.
Vibration and Audible Alert on Moto G6 Plus
Knutselmaaster said:
I believe that it has to be set for each application individually, in the settings menu of the application.
Click to expand...
Click to collapse
Good Morning and MANY THANKS for your prompt reply.I have now gone into Apps-Notifications-Advanced and found the area where I can turn the Vibrate on so I have done that and I'm pleased to advise you that I now have both working simultaneously.What caused the problem is that about 500 mtrs from my house there are 2 high rise blocks ready for demolition with a lot of Cellular Antenna's on top.As the Vodafone Network keeps saying NETWORK ANOMILIY I kept loosing the Network and after contacting Vodafone they said the system was OK and the problem was with my Apps.So I uninstalled and reinstalled my Apps that were playing up and I completely missed to turn on the Vibrate in Notifications but you have saved the day.As for Vodafone they have now admitted that there is an ongoing intermittent fault on the network in my area (I suspect it's something to do with this demolition job as none of the Antenna have been removed as yet.) Once again MANY MANY THANKS for all your help.Best Wishes to All,Sethnettles.