Solution to fingerprint not working. - Ascend Mate 7 General

If the fingerprint is failing to construct, you need to extract the boot.img from the latest marshmallow update(better chance with full package, but you can also use ota) (b514 or b522) using huawei update extractor and flash using fastboot or flashify.
If you have root you will loose root.
Just flash the supersu 2.64 pro using TWRP, if you want to root.

hi bro please clear one thing i am on B511 and when i installed B522 TWRP backup from Chudy's post fingerprint was failing to construct so i reverted back to B511 TWRP back now please tell me that should i reinstall Chudy's B522 recovery of TWRP and then flast Boot.img? extracted from this file?

--__-- Reeyan --__-- said:
hi bro please clear one thing i am on B511 and when i installed B522 TWRP backup from Chudy's post fingerprint was failing to construct so i reverted back to B511 TWRP back now please tell me that should i reinstall Chudy's B522 recovery of TWRP and then flast Boot.img? extracted from this file?
Click to expand...
Click to collapse
yes you are right

Visitor finger print option is missing at b514
Do you know how to get it again

kr1shna said:
If the fingerprint is failing to construct, you need to extract the boot.img from the latest marshmallow update(better chance with full package, but you can also use ota) (b514 or b522) using huawei update extractor and flash using fastboot or flashify.
If you have root you will loose root.
Just flash the supersu 2.64 pro using TWRP, if you want to root.
Click to expand...
Click to collapse
its not working.....!! i tried installing B522 again and after that when fingerprint failed to construct i rooted Supersu 2.64pro zip and then installed flashify and installed boot image extracted from b522 via huawei extractor but failed phone goes into recovery
---------- Post added at 08:17 AM ---------- Previous post was at 08:15 AM ----------
--__-- Reeyan --__-- said:
its not working.....!! i tried installing B522 again and after that when fingerprint failed to construct i rooted Supersu 2.64pro zip and then installed flashify and installed boot image extracted from b522 via huawei extractor but failed phone goes into recovery
Click to expand...
Click to collapse
it says rescue mode attention please update your system again
error!
func No: 9 (func_boot_keneral)
Error No: 2

--__-- Reeyan --__-- said:
its not working.....!! i tried installing B522 again and after that when fingerprint failed to construct i rooted Supersu 2.64pro zip and then installed flashify and installed boot image extracted from b522 via huawei extractor but failed phone goes into recovery
---------- Post added at 08:17 AM ---------- Previous post was at 08:15 AM ----------
it says rescue mode attention please update your system again
error!
func No: 9 (func_boot_keneral)
Error No: 2
Click to expand...
Click to collapse
I'm trying not to be rude, but this is the 100th time I'm telling you "B514 is the final marshmallow for your region". If b522 was the final update for your region you would have gotten an ota update from 514 to 522, but you didnt, why? Because its the same update file but for different region. If you flash firmwares of different regions you will get problems. Now I dont want to another Im on b522 and this happened please help from you. Flash b514 and then try for solutions. All the best.

kr1shna said:
I'm trying not to be rude, but this is the 100th time I'm telling you "B514 is the final marshmallow for your region". If b522 was the final update for your region you would have gotten an ota update from 514 to 522, but you didnt, why? Because its the same update file but for different region. If you flash firmwares of different regions you will get problems. Now I dont want to another Im on b522 and this happened please help from you. Flash b514 and then try for solutions. All the best.
Click to expand...
Click to collapse
ok i understood can you please share Twrp back of B514 so i can flash via twrp please

--__-- Reeyan --__-- said:
ok i understood can you please share Twrp back of B514 so i can flash via twrp please
Click to expand...
Click to collapse
Sure bro I would, but you have a Mt7-l09? Mine is TL10.

kr1shna said:
Sure bro I would, but you have a Mt7-l09? Mine is TL10.
Click to expand...
Click to collapse
year Bro i am on Mt7-L09

--__-- Reeyan --__-- said:
year Bro i am on Mt7-L09
Click to expand...
Click to collapse
That's why i cant't help you bro. Ask someone who has l09.

kr1shna said:
That's why i cant't help you bro. Ask someone who has l09.
Click to expand...
Click to collapse
Hmmmmmmmm.....!!

Related

How to unroot and uninstall TWRP

How can i unroot and install the original recovery
Nvm, already got it.
Could you explain how to do or provide a link? I want to turn back to stock recovery and unroot my phone
Sent from my ALE-L21 using xda premium
Fedroid said:
Could you explain how to do or provide a link? I want to turn back to stock recovery and unroot my phone
Sent from my ALE-L21 using xda premium
Click to expand...
Click to collapse
I used fastboot to install the stock recovery which i got form:
http://www.rootjunkysdl.com/?device=Huawei P8 Lite&folder=Firmware
I used these links to do it:
https://www.youtube.com/watch?v=UN7XW4HnFT8
https://www.youtube.com/watch?v=YfWYKREeQeQ
And then installed the offical rom through the stockrecovery by putting the dload folder on my micro-SD
http://forum.xda-developers.com/android/development/huawei-p8-p8-lite-stock-rom-firmware-t3176374
For some reason all apps and things were still on my phone afterwards, i hope it will help you.
I have done it, but when i install Ota it stucks at 11%...
Sent from my Moto G using xda premium
Fedroid said:
I have done it, but when i install Ota it stucks at 11%...
Sent from my Moto G using xda premium
Click to expand...
Click to collapse
Have you tried it when the file was on SD card and internal storage?
Fedroid said:
I have done it, but when i install Ota it stucks at 11%..
Click to expand...
Click to collapse
Some Updates can't be installed over the b136.
The german b170 (a partial update) needs the b132 or the b133 to upgrade to b170. Directly update from b136 to b170 isn't possible
EpicBas said:
Have you tried it when the file was on SD card and internal storage?
Click to expand...
Click to collapse
I have tried both with no results.
---------- Post added at 06:05 PM ---------- Previous post was at 06:02 PM ----------
spkahal said:
Some Updates can't be installed over the b136.
The german b170 (a partial update) needs the b132 or the b133 to upgrade to b170. Directly update from b136 to b170 isn't possible
Click to expand...
Click to collapse
I have two Ale_21.
One is stock and never modified and went from 136 to 170 without problems.
The problem is with the other "modified phone", in some way I think ota detects
it was modified before and gives error.
EpicBas said:
I used fastboot to install the stock recovery which i got form ...
Click to expand...
Click to collapse
Could you please be a little more specific?
You mean you downloaded stockrecovery.img form here
Code:
rootjunkysdl.com/files/Huawei%20P8%20Lite/Firmware/stockrecovery.img
? And then you startet the phone in fastboot mode with the command
Code:
adb reboot bootlader
? Last you send the command
Code:
fasboot flash recovery stockrecovery.img
?
I already regret installing TWRP since I can't even try to install further Updates via dload. So I just don't want to make any more mistakes and/or brick the phone.
@Schwedenbitter
Yes that's pretty much what I have done.
You need to have the right version in order to install via update
From where i can get stock recovery for marshmallow b550, because every recovery i try stuck on 90 or 5%. I tried also to extract update.app b550 and it also fail
Expans said:
From where i can get stock recovery for marshmallow b550, because every recovery i try stuck on 90 or 5%. I tried also to extract update.app b550 and it also fail
Click to expand...
Click to collapse
B550
you have dual sim or single sim?
Dual sim
then download the link from my post .. it's for ds
And i can just flash that zip from twrp ?
VladHD said:
You need to have the right version in order to install via update
Click to expand...
Click to collapse
Right version of what? The recovery.img?
Expans said:
And i can just flash that zip from twrp ?
Click to expand...
Click to collapse
No you need to extract it with huawei update extractor to get the recovery.img
And you need to install it with fastboot.
Schwedenbitter said:
Right version of what? The recovery.img?
Click to expand...
Click to collapse
The current software version of your phone.
EpicBas said:
The current software version of your phone.
Click to expand...
Click to collapse
Yes,not every update is compatibile with the current version of your software.
Expans said:
And i can just flash that zip from twrp ?
Click to expand...
Click to collapse
You need to extract from update.app and flash via fastboot with this command: fastboot flash recovery recovery.img

[SOLVED] Lots of problems on ASUS ZENFONE 2 LASER (ZE500KL [Z00ED])

hi there it's been a loooong time search on the internet and ... no answers to my problems so yeah hello !
I have a Zenfone 2 laser ZE500KL and a custom recovery (twrp 2.8.7.7) and my phone have no OS installed (i don't know why) i tried many times to install the asus marshmallow update from fastboot, adb push, adb sideload, but nothing work and i have a little word saying "This package is for WW_phone devices; this is a omni_Z00E" followed by "Updater process ended with ERROR: 7" and "Error installing zip finle '/sdcard/UL-ASUS_Z00E-WW-13.10.7.2-user.zip'" i don't know what this mean and i want to know because i am a little lost.
thanks
alex
edit of 19/06/2016
YAY finally it finished after days of "no my phone wil never work again" it's finally over with a big YAY
so thanks to @sziraqui for his help and @tanker456 for the last help he gives me before i give up you two guys are the best !
so for more info and help i give you these two guys that are awesome !
contents box
http://forum.xda-developers.com/zenfone-2-laser/help/unable-update-to-marshmallow-via-ota-t3389876
Sziraqui
What are you trying to flash? Custom kernel? Stock boot.img?
Either the .img is corrupt/incompletely downloaded OR you have unlocked boot loader using unofficial method.
1. Download the boot.img and try again
2. If it still gives error, you do not have a proper bootloader unlock. Try flashing twrp that is confirmed working by you, to verify if bootloader is properly unlocked or not.
Tanker456
try this firmware called backtostock here
http://forum.xda-developers.com/zenf...flash-t3365237
it will work for sure. but if it dosen't
you can go with this one too
http://forum.xda-developers.com/zenf...550kl-t3236264
Alex07060 there is boot image of 1.13 firmware, u can try that
LuK1447 post that saved my life too
http://forum.xda-developers.com/zen...50kl-ze551kl-zd551kl-ze600kl-ze601kl-t3333482
Click to expand...
Click to collapse
Hi have the same problame i have searched and you can flash http://androiding.how/install-ota-update-twrp-zenfone-2/ try this method please and say if it work or no
Alex070609 said:
hi there it's been a loooong time search on the internet and ... no answers to my problems
"This package is for WW_phone devices; this is a omni_Z00E" followed by "Updater process ended with ERROR: 7" and "Error installing zip finle '/sdcard/UL-ASUS_Z00E-WW-13.10.7.2-user."
Click to expand...
Click to collapse
If you had spent enough time searching on xda, you would have got the solution. I posted a solution to this here http://forum.xda-developers.com/zenfone-2-laser/help/unable-update-to-marshmallow-via-ota-t3389876 And the thread is marked "solved" which means it worked.
sziraqui said:
Apparently, your current recovery version does not match with your current firmware version. There are two possible workarounds-
1. Wipe system by executing "fastboot erase system" in fastboot mode. Then reflash latest official asus lollipop ROM. This will fix the recovery and firmware mismatch and you will then be able to flash MM via stock recovery.
2. If you are experienced with edit8ng updater-script, Extract all contents of MM ota. Open updater-script and remove all asserts and lines that say "abort". Then compress the contents again. (You can't edit without extracting coz zip is signed). Flash this modified ota zip via TWRP.
If you still can't flash it or you are unable to edit updater-script, pm me, I have downloaded the MM ROM, I will send you modified updater-script.
I can even convert this ota into .imgs so that you can flash directly via fastboot
Click to expand...
Click to collapse
Click on the small "play" icon in below quote and you will be redirected to the original post where I uploaded updater-script. This also answers @ericpeacock79 's question on flashing stock rom on twrp.
sziraqui said:
alright, download the updater-script from attachment. Flash via TWRP.
Detailed instructions-
First extract entire ota zip. Delete the original updater-script.
Then extract "updater-script_modified.zip"
Copy the extracted "updater-script" to extracted ota at the right location. (META-INF/com/google/android)
Compress the ota files as a zip using 7zip or winrar. Compression level "normal" . DONT USE ANY ANDROID APP FOR COMPRESSING, USE WINDOWS/LINUX APP ONLY.
Flash the modified zip via TWRP recovery
Click to expand...
Click to collapse
@sziraqui You are awesome. Thank you.
Click on the small "play" icon in below quote and you will be redirected to the original post where I uploaded updater-script. This also answers @ericpeacock79 's question on flashing stock rom on twrp.[/QUOTE]
Feels good when sum1 helps even if there is a repeated question. Most people will say "search before you post/ don't bump the forum/ etc. and provide links which are difficult for new users to follow. You are one of the few devs who are offer REAL help. Hatts off!
sziraqui said:
If you had spent enough time searching on xda, you would have got the solution. I posted a solution to this here http://forum.xda-developers.com/zenfone-2-laser/help/unable-update-to-marshmallow-via-ota-t3389876 And the thread is marked "solved" which means it worked.
Click on the small "play" icon in below quote and you will be redirected to the original post where I uploaded updater-script. This also answers @ericpeacock79 's question on flashing stock rom on twrp.
Click to expand...
Click to collapse
Hi i have the same problame problame and i have the stock firmware as a zip file do you can help me
@sziraqui Yes it works the installation is done BUT i got an new error "ERROR: Can't load invalid boot image" i need a little bit more help and many thanks for the help give to me right now its fantastic
Alex
Alex070609 said:
@sziraqui Yes it works the installation is done BUT i got an new error "ERROR: Can't load invalid boot image" i need a little bit more help and many thanks for the help give to me right now its fantastic
Alex
Click to expand...
Click to collapse
Hey please if you can do it for me and upload the Rom modified because my computer is broken
Alex070609 said:
@sziraqui Yes it works the installation is done BUT i got an new error "ERROR: Can't load invalid boot image" i need a little bit more help and many thanks for the help give to me right now its fantastic
Alex
Click to expand...
Click to collapse
What are you trying to flash? Custom kernel? Stock boot.img?
Either the .img is corrupt/incompletely downloaded OR you have unlocked boot loader using unofficial method.
1. Download the boot.img and try again
2. If it still gives error, you do not have a proper bootloader unlock. Try flashing twrp that is confirmed working by you, to verify if bootloader is properly unlocked or not.
My bootloader is unlocked unofficial and i need to flash the stock Rom using twrp
---------- Post added at 01:56 PM ---------- Previous post was at 01:56 PM ----------
sziraqui said:
What are you trying to flash? Custom kernel? Stock boot.img?
Either the .img is corrupt/incompletely downloaded OR you have unlocked boot loader using unofficial method.
1. Download the boot.img and try again
2. If it still gives error, you do not have a proper bootloader unlock. Try flashing twrp that is confirmed working by you, to verify if bootloader is properly unlocked or not.
Click to expand...
Click to collapse
My bootloader is unlocked unofficial and i need to flash the stock Rom using twrp
i have actually a right bootloader (official) but each time i triying to flash a boot.img it says file corrupted so i don't know how to do it do you have a boot.img correct to do that ?
thanks in advance
alex
sziraqui said:
What are you trying to flash? Custom kernel? Stock boot.img?
Either the .img is corrupt/incompletely downloaded OR you have unlocked boot loader using unofficial method.
1. Download the boot.img and try again
2. If it still gives error, you do not have a proper bootloader unlock. Try flashing twrp that is confirmed working by you, to verify if bootloader is properly unlocked or not.
Click to expand...
Click to collapse
Hey please does this method work a full Rom
hu what ?
@sziraqui Okey news of the day i find a correct boot.img but i get a bootloop yeah ! so what can i do now ?
alex
The problem u must do is find stock recovery of firmware 6.0 then u can sideload stock rom 6.0 ^^
I use ze500kg same ur phone, maybe i can help you
Contact me facebook: [email protected]
mohamedelkholy said:
My bootloader is unlocked unofficial and i need to flash the stock Rom using twrp
---------- Post added at 01:56 PM ---------- Previous post was at 01:56 PM ----------
My bootloader is unlocked unofficial and i need to flash the stock Rom using twrp
Click to expand...
Click to collapse
try this firmware called backtostock here
http://forum.xda-developers.com/zen...guide-how-to-revert-to-stock-reflash-t3365237
it will work for sure. but if it dosen't
you can go with this one too
http://forum.xda-developers.com/zenfone-2-laser/general/root-ze550kl-t3236264
Alex07060 there is boot image of 1.13 firmware, u can try that
well with your indications a get a bootloop something else could help ? @tanker456
Alex070609 said:
well with your indications a get a bootloop something else could help ? @tanker456
Click to expand...
Click to collapse
i didn't understand what said,
did u get a bootloop or
are say that u would get a bootloop
Sent from my ASUS_Z00LD using XDA-Developers mobile app
look i had a bootloop ~20 mins and retry with a second link post and voila ! i get a phone that work it's done
Alex070609 said:
look i had a bootloop ~20 mins and retry with a second link post and voila ! i get a phone that work it's done
Click to expand...
Click to collapse
hmm good to hear it
Sent from my ASUS_Z00LD using XDA-Developers mobile app

k4 note volte S230 update

Hi can any one upload s230 row plz. Need it plzzzzzz
Need pro's here. Can we use flashfire to install official ota updates? App claims it could. I'm using twrp. Am not sure if the official S219 to S230 row zip file I have can be used in twrp.
RK_D2502 said:
Need pro's here. Can we use flashfire to install official ota updates? App claims it could. I'm using twrp. Am not sure if the official S219 to S230 row zip file I have can be used in twrp.
Click to expand...
Click to collapse
custom recovery wont intall official ota updates.
custom recovery can install custom rom updates only.
its better to flash stock recovery and then unroot your phone to install the update through stock recovery.
---------- Post added at 05:57 PM ---------- Previous post was at 05:50 PM ----------
NOTE:- Do not install the s230 update while your sd card inserted in the phone. Remove the sd card and then proceed. I installed the update as usual by keeping the micro sd connected to the device. After the update was installed the phone rebooted and gave me a notification saying damaged sd card. Though i fixed the sd card but i lost all the data of sd card.
I used the twrp How can ı update to s230 with twrp
twrp not working
It's not working with twrp. Flashed s208 row with twrp which have changed to stock recovery. Next installed s214 row. Then all updated fine. And my SD card is also fine.
my rom has s208, can i update s230 update directly ?
kggharate said:
my rom has s208, can i update s230 update directly ?
Click to expand...
Click to collapse
no seems, you can flash s219 and after update by recovery or u may get official update.
S219 to s230 ota file
https://drive.google.com/file/d/0BxHh5z_LF7LMYUNmTDdQU1R2bmM/view
kggharate said:
my rom has s208, can i update s230 update directly ?
Click to expand...
Click to collapse
No. Flash s219 or S218. Then update
Ongoli Koushik said:
Hi can any one upload s230 row plz. Need it plzzzzzz
Click to expand...
Click to collapse
Lenovo A7010 - Flash A7010a48_S230_161129_ROW
https://cloud.mail.ru/public/A7pM/P5AUfkCUc
Apologies for being off-topic! I faced a lot of issues in s230 update thus downgraded to s218 & now on s219. I am able to get adb to recognize my device but not fastboot. Therefore I am unable to unlock bootloader!
When I type in " adb reboot bootloader" or click on the "unlock_recovery.bat" file provided, I get booted into a dark screen where "fastboot" is written at the bottom left & the command prompt window says < waiting for device> & I am stuck there until I reboot my phone.
Can somebody tell how to get past this?
password
sharan565 said:
Lenovo A7010 - Flash A7010a48_S230_161129_ROW
https://cloud.mail.ru/public/A7pM/P5AUfkCUc
Click to expand...
Click to collapse
what is the password of the file , i dowloaded the whole zip file of v30 but while extarcting its asking for password .
https://cloud.mail.ru/public/A7pM/P5AUfkCUc
this is the link u share and i download from this link only.
harshk60 said:
what is the password of the file , i dowloaded the whole zip file of v30 but while extarcting its asking for password .
https://cloud.mail.ru/public/A7pM/P5AUfkCUc
this is the link u share and i download from this link only.
Click to expand...
Click to collapse
Password: lenovo-forums.ru
sharan565 said:
Password: lenovo-forums.ru
Click to expand...
Click to collapse
Thnx got extracted. Have u tested this row zip means have u got successfully flashed by this row zip or u just share link.
Sent from my Lenovo A7010a48 using XDA-Developers mobile app
harshk60 said:
Thnx got extracted. Have u tested this row zip means have u got successfully flashed by this row zip or u just share link.
Sent from my Lenovo A7010a48 using XDA-Developers mobile app
Click to expand...
Click to collapse
i didn't tested yet. just shared link.
sharan565 said:
i didn't tested yet. just shared link.
Click to expand...
Click to collapse
Ok. Thnx
Sent from my Lenovo A7010a48 using XDA-Developers mobile app
Has anyone link for S219 Row??
I want to SWITCH TO LATEST UPDATE. I have downgraded for Volte, but now as they have included to their latest version. searching for link from last 2 weeks, but couldn't find stock roms. all small 40 to50 mbs link.

Any guide to update Mate 8 to NXT-L29C432B581 from B560 rooted and unlocked device?

I read alot around here but I'm still confused...
No way to update by TWRP?
mini review - Thread & way to install Kangvip ROM
zappomax said:
I read alot around here but I'm still confused...
No way to update by TWRP?
Click to expand...
Click to collapse
Check this thread - > https://forum.xda-developers.com/mate-8/general/mini-review-nxt-l29c432b581-guide-how-t3620079
Excellent step by step guide to update to B581 - follow all the instructions & you will be on B581 (blackinfinity did a fantastic job)
:good::good::good::good:
Samavb said:
Check this thread - > https://forum.xda-developers.com/mate-8/general/mini-review-nxt-l29c432b581-guide-how-t3620079
Excellent step by step guide to update to B581 - follow all the instructions & you will be on B581 (blackinfinity did a fantastic job)
:good::good::good::good:
Click to expand...
Click to collapse
I saw it before. It's recommended only for non rooted and locked devices.
zappomax said:
I saw it before. It's recommended only for non rooted and locked devices.
Click to expand...
Click to collapse
I used that method and I was on B560 rooted and unlocked (and with a modified boot.img). Be sure to re-install the stock recovery (not TWRP).
no way ...
harryhase said:
no way ...
Click to expand...
Click to collapse
Can U explain?
zappomax said:
Can U explain?
Click to expand...
Click to collapse
Flash original unrooted B560 via TWRP and wait for OTA.
Hmm I got OTA for L29C432B581 today but I'm on unlocked bootloader, rooted and on TWRP so I haven't tried to accept the update. As I understand it, it won't work to update given that I don't have stock recovery.
Skickat från min HUAWEI NXT-L29 via Tapatalk
Leo_83 said:
Hmm I got OTA for L29C432B581 today but I'm on unlocked bootloader, rooted and on TWRP so I haven't tried to accept the update. As I understand it, it won't work to update given that I don't have stock recovery.
Skickat från min HUAWEI NXT-L29 via Tapatalk
Click to expand...
Click to collapse
You need stock boot.img and system or the OTA will fail. Just download B560 full and flash it in TWRP, that will unroot, restore stock system, restore stock boot.img, restore stock recovery. Then you can install OTA without any issues (you do not have to lock your bootloader).
Boosik said:
You need stock boot.img and system or the OTA will fail. Just download B560 full and flash it in TWRP, that will unroot, restore stock system, restore stock boot.img, restore stock recovery. Then you can install OTA without any issues (you do not have to lock your bootloader).
Click to expand...
Click to collapse
B560 it's not just only the usual "update.zip" file, there's also the "update_full_hw_eu.zip" file.
If I reinstal B560 again just to get the B581 OTA, have I to reinstal both files or only "update.zip"??
Thx in advance!!
zappomax said:
B560 it's not just only the usual "update.zip" file, there's also the "update_full_hw_eu.zip" file.
If I reinstal B560 again just to get the B581 OTA, have I to reinstal both files or only "update.zip"??
Thx in advance!!
Click to expand...
Click to collapse
Flash both just to be sure (it will NOT wipe your data or configuration).
Boosik said:
Flash both just to be sure (it will NOT wipe your data or configuration).
Click to expand...
Click to collapse
Thx
I suppose that also the "Dload" methot should be work in case my phone misses the OTA, right?
Did flashing both files work for you zappomax?
To answer my own question, i did a fresh install of 560 through twrp following this thread: https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c432b560-official-t3540042 , but without installing rootfiles. After phone set up update to 581 was offered in system update. Tried to install (796 Mb update) but failed to pass verification.
After reboot in 'old' 560 connected phone to hisuite which offered me the full (2.2Gb) update to 581. This one installed without problems.
Rooted with Magisk afterwards.
My solution is to flash stock boot.img and update using hisuite..i was in 560 before..
Boosik said:
Flash both just to be sure (it will NOT wipe your data or configuration).
Click to expand...
Click to collapse
Not true, It will wipe everything.
svmsonite said:
Not true, It will wipe everything.
Click to expand...
Click to collapse
Nope, it didn't wipe anything on my phone, just do not factory reset/wipe.
Anyone know how to find stock boot.img? Im om b581, L29?
---------- Post added at 02:06 PM ---------- Previous post was at 01:52 PM ----------
Nirak said:
To answer my own question, i did a fresh install of 560 through twrp following this thread: https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c432b560-official-t3540042 , but without installing rootfiles. After phone set up update to 581 was offered in system update. Tried to install (796 Mb update) but failed to pass verification.
After reboot in 'old' 560 connected phone to hisuite which offered me the full (2.2Gb) update to 581. This one installed without problems.
Rooted with Magisk afterwards.
Click to expand...
Click to collapse
Is it possible to just download the b180 update.zip and ...full_hw...zip, and flash? Instead of flashing the old b560 zips?
From 581 to 180 is a downgrade, so i guess you need to flash a downgrade package before you can flash 180 software.
boot loop after flashing boot.img, recovery.img, system.img, cust.img through fastboot. I also wipe data and cache after flashing

I need help with my root.

Okay, I want to switch from SuperSU to Magisk because I must have snapchat. I'm just trying to hide the root that way I can get signed in on snapchat but everytime I uninstall SuperSU without flashing the stock boot it is successful, otherwise if I try to restore stock boot from uninstalling SuperSU it fails. After I uninstall SuperSU without flashing the stock boot, I go to flash Magisk and it fails because it has already been patched. Unfortunately I'm still on the Nexus ROM. Also I tried flashing the B180 Stock ROM it gives off the same error in the AROMA installer saying that the boot image is already patched.
Please help I'm new to this!! Thanks
I'm using B160/SuperSU, so don't have your version.
Did you also try flashing the B180 boot.img from B180 zip in this thread:
https://forum.xda-developers.com/hu...uide-how-to-update-b130-to-b140-b150-t3555254
After flashing boot.img, immediately try flashing Magisk while still in TWRP.
I presume you have made a full backup before trying anything
InfinityXDA said:
Okay, I want to switch from SuperSU to Magisk because I must have snapchat. I'm just trying to hide the root that way I can get signed in on snapchat but everytime I uninstall SuperSU without flashing the stock boot it is successful, otherwise if I try to restore stock boot from uninstalling SuperSU it fails. After I uninstall SuperSU without flashing the stock boot, I go to flash Magisk and it fails because it has already been patched. Unfortunately I'm still on the Nexus ROM. Also I tried flashing the B180 Stock ROM it gives off the same error in the AROMA installer saying that the boot image is already patched.
Please help I'm new to this!! Thanks
Click to expand...
Click to collapse
divineBliss said:
I'm using B160/SuperSU, so don't have your version.
Did you also try flashing the B180 boot.img from B180 zip in this thread:
https://forum.xda-developers.com/hu...uide-how-to-update-b130-to-b140-b150-t3555254
After flashing boot.img, immediately try flashing Magisk while still in TWRP.
I presume you have made a full backup before trying anything
Click to expand...
Click to collapse
So what I did was try installing the B180 stock rooted with Magisk and it booted up fine and Magisk was on there, but not functional. So I flashed Nexus again and the boot animation is the same as the B180 stock and before I have done all of this the Nexus boot animation what the google pixel animation. So you want me to take that boot.img in that thread and flash it because I never have. And the Nexus is B160 I would have to find a B160 stock boot.img right?
I'm not suggesting you do anything with B160 - just wanted to point out I'm not using B180 because my phone was all configured the way I like it (rooted, etc) and I don't want to risk breaking it updating to B180.
So yes, try the B180 boot.img you mentioned - but only if you have full backups of your current working setup just in case.
InfinityXDA said:
So what I did was try installing the B180 stock rooted with Magisk and it booted up fine and Magisk was on there, but not functional. So I flashed Nexus again and the boot animation is the same as the B180 stock and before I have done all of this the Nexus boot animation what the google pixel animation. So you want me to take that boot.img in that thread and flash it because I never have. And the Nexus is B160 I would have to find a B160 stock boot.img right?
Click to expand...
Click to collapse
divineBliss said:
I'm not suggesting you do anything with B160 - just wanted to point out I'm not using B180 because my phone was all configured the way I like it (rooted, etc) and I don't want to risk breaking it updating to B180.
So yes, try the B180 boot.img you mentioned - but only if you have full backups of your current working setup just in case.
Click to expand...
Click to collapse
The backups I had failed meaning I must get a stock ROM from the forum, but I'm on the B160 now. I'm confused because you say to flash the B180 when I'm on the Nexus B160 ROM (H1611C07B160) so I'm just confused. I thank you for helping me with this though man!! .
You mentioned B180 in your OP and never mentioned B160 - thus the source of my confusion thinking you have a B180 ROM.
If you haven't tried flashing a B160 stock boot image, try that. Otherwise maybe you should install a stock B160 ROM and go from there.
Hit the thanks button for posts which help you
InfinityXDA said:
The backups I had failed meaning I must get a stock ROM from the forum, but I'm on the B160 now. I'm confused because you say to flash the B180 when I'm on the Nexus B160 ROM (H1611C07B160) so I'm just confused. I thank you for helping me with this though man!! .
Click to expand...
Click to collapse
divineBliss said:
You mentioned B180 in your OP and never mentioned B160 - thus the source of my confusion thinking you have a B180 ROM.
If you haven't tried flashing a B160 stock boot image, try that. Otherwise maybe you should install a stock B160 ROM and go from there.
Hit the thanks button for posts which help you
Click to expand...
Click to collapse
The last sentence "Unfortunately I'm still on the Nexus ROM. Also I tried flashing the B180 Stock ROM it gives off the same error in the AROMA installer saying that the boot image is already patched."
The Nexus is B160, I said I tried flashing the B180 because it had Magisk on it lol
I don't have names like Nexus memorized with version numbers - that's a bit much to expect.
You can't mix version numbers, so don't bother again or the phone won't work for sure.
InfinityXDA said:
The last sentence "Unfortunately I'm still on the Nexus ROM. Also I tried flashing the B180 Stock ROM it gives off the same error in the AROMA installer saying that the boot image is already patched."
The Nexus is B160, I said I tried flashing the B180 because it had Magisk on it lol
Click to expand...
Click to collapse
---------- Post added at 01:56 PM ---------- Previous post was at 01:53 PM ----------
I wonder if the thread I linked earlier has a stock B160 boot.img in the B160 ROM zip file. That may be what you need to try in order to get Magisk to install.
divineBliss said:
I don't have names like Nexus memorized with version numbers - that's a bit much to expect.
You can't mix version numbers, so don't bother again or the phone won't work for sure.
---------- Post added at 01:56 PM ---------- Previous post was at 01:53 PM ----------
I wonder if the thread I linked earlier has a stock B160 boot.img in the B160 ROM zip file. That may be what you need to try in order to get Magisk to install.
Click to expand...
Click to collapse
Bro it worked thank you so much!!! Edit: also how long have you been using this device
Awesome . I've had my H1611 since about November 2016 Black Friday $50.
InfinityXDA said:
Bro it worked thank you so much!!! Edit: also how long have you been using this device
Click to expand...
Click to collapse
divineBliss said:
Awesome . I've had my H1611 since about November 2016 Black Friday $50.
Click to expand...
Click to collapse
Is it better to install systemless Xposed through Magisk or system?
See my H1611 Xposed thread
https://forum.xda-developers.com/huawei-ascend-xt/help/xposed-huawei-ascend-xt-t3536003/
I installed using Magisk Systemless Xposed. Never tried System method on this phone, so can't really compare them myself.
Post your questions, etc about Xposed in that thread after skimming through the thread.
InfinityXDA said:
Is it better to install systemless Xposed through Magisk or system?
Click to expand...
Click to collapse
divineBliss said:
See my H1611 Xposed thread
https://forum.xda-developers.com/huawei-ascend-xt/help/xposed-huawei-ascend-xt-t3536003/
I installed using Magisk Systemless Xposed. Never tried System method on this phone, so can't really compare them myself.
Post your questions, etc about Xposed in that thread after skimming through the thread.
Click to expand...
Click to collapse
Okay I did everything but when I goto install systemless Xposed it gives this error in the log
- Copying zip to temp directory
- Installing Xposed_Framework_SDK_27-90.1-beta3_Systemless.zip
- Mounting /system, /vendor
update-binary[73]: unzip: not found
! Unable to extract zip file!
Failed!
! Installation failed
Edit: Is that zip flashable in TWRP?
SDK27 is the wrong file. H1611 is SDK23. The file should be TWRP flashable.
Like I asked before, please post in the H1611 Xposed thread to keep all Xposed information together.
InfinityXDA said:
Okay I did everything but when I goto install systemless Xposed it gives this error in the log
- Copying zip to temp directory
- Installing Xposed_Framework_SDK_27-90.1-beta3_Systemless.zip
- Mounting /system, /vendor
update-binary[73]: unzip: not found
! Unable to extract zip file!
Failed!
! Installation failed
Edit: Is that zip flashable in TWRP?
Click to expand...
Click to collapse
divineBliss said:
SDK27 is the wrong file. H1611 is SDK23. The file should be TWRP flashable.
Like I asked before, please post in the H1611 Xposed thread to keep all Xposed information together.
Click to expand...
Click to collapse
Alrighty, thank you man!!
divineBliss said:
SDK27 is the wrong file. H1611 is SDK23. The file should be TWRP flashable.
Like I asked before, please post in the H1611 Xposed thread to keep all Xposed information together.
Click to expand...
Click to collapse
I still get the installation error I looked it up all over and nothing is helping there was an error saying can't extract the zip in TWRP so I don't know what is going on.
Edit: I'll say this also in the forum

Categories

Resources