Retail Verizon Note 4 N910VVRU2BPA1 going to the Developer Mode, Relax and take your time, You're in no hurry. I reduced the number of steps to gain permanent root and unlock the bootloader.
Files and HYPERLINKS you may need:
View attachment SAMSUNG_USB_Driver_for_Mobile_Phones.zip
View attachment minimal_adb_fastboot_v1.3.1_setup.zip
View attachment samsung_unlock_n4-fix.zip
View attachment NewKingrootV4.85_C139_B255_en_release_2016_03_29_105203.zip
View attachment 3779589
View attachment Emotion-TW-5.1.1-nightly-r21-RC1-SM-N910P.zip
View attachment BETA-SuperSU-v2.71-20160331103524.zip
View attachment Odin3_v3.10.7.zip
View attachment twrp-3.0.2-0-trltevzw.tar.zip
View attachment Debloater-setup-v3.90.zip
( Re-partition sd card ) ( PaulPizz ROM-5.1.1 is under Past Builds )
Here we go....In Windows, Copy samsung_unlock_n4-fix to the "Minimal ADB and Fastboot" install folder location.
On Phone, after doing a Factory Reset and without a sim card, Skip all initial phone setup except wifi.
Rejected all popup offers and tick don’t remind me.
Connect phone to usb as a Media Device then Copy these files to the phones internal storage.
(1)NewKingrootV4.85_C139_B255_en_release_2016_03_29_105203.apk
(2)Emotion-TW-5.1.1-nightly-r21-RC1-SM-N910P.zip
(3)BETA-SuperSU-v2.71-20160331103524.zip
Disconnect usb cable and enable USB debugging, allow Unknown sources installations, also change Display timeout to 10 min. and format your sd card. Close all recent apps. Reconnect usb cable ( When prompted click Always allow usb debugging on this computer)
Install and open Kingroot ( decline Google offers...) and go to the point "Root access is unavailable" DO NOT start root yet, WAIT until the last second so the phone will remain stable. Copy the name "samsung_unlock_n4-fix" from the actual file so it will be on your clipboard and you can right click it into the adb commands.
Start the program "Minimal ADB and Fastboot" and use the commands
(1) adb devices
(2) adb push samsung_unlock_n4-fix /data/local/tmp/
(3) adb shell
{[ HERE NOW Start Rooting with Kingroot. Once phone is rooted continue with the adb commands }]
(4) su ( You have to grant root permission on the phone and continue)
(5) cd /data/local/tmp/
(6) chmod 777 samsung_unlock_n4-fix
(7) chown root.root samsung_unlock_n4-fix
(8) ./samsung_unlock_n4-fix
When prompted type in yes and Wait... Wait for the phone to go into a boot-loop then disconnect the usb cable, pull the battery and SD card.
Check in Download, you should now have MODE: Developer. The boot-loader is unlocked.
On computer close “Minimal ADB and Fastboot” and open Odin untick auto reboot. Connect usb cable then flash twrp-3.0.2-0-trltevzw.tar.md5. Wait a minute... untill Odin finishes then pull the battery.
Next to last thing, reinstall battery and manually boot into recovery. You now have a unlocked bootloader with TeamWin Recovery. STOP FIRST thing, use it to make a complete backup { Now at this point you could restore a TWRP backup or -HYPERLINK-install a custom ROM. OR To remain stock with root continue.......}
Install Emotion-TW-5.1.1-nightly-r21-RC1-SM-N910P.zip and BETA-SuperSU-v2.71-20160331103524.zip with TWRP from internal storage. Then do a Factory Reset with TWRP or from within the phones setting and it will be good to go. -HYPERLINK-To reuse the SD card re-format / re-partition it with your computer.
I have also been able to used Odin to flashed the SM-N910V Developer Edition up to date with the retail BPA1 file found on Sammobile then used the direction above to convert it back to Developer Mode. Have Fun and less get busy before Verizon closes the window.
I recommend using Gatesjunior's Debloater program to block SDM.apk before reconnecting wifi or someday you could get a over the air updated that could lock it back up.
Some people are having problems with Kingroot because they are starting off with a corrupted phone.
To clear up corruption, junk files or whatever from your phone Odin Stock 5.1.1, and do a Factory Reset twice in a row. Restore from within Recovery and from within the Phone Setting. Skip all the initial phone setup just do the clean up twice. After that you could still have some corruption but, That should clean it up.
doctor-cool said:
Retail Note 4 going to the Developer Mode, using the same files found HERE http://forum.xda-developers.com/note-4-verizon/general/guide-noobs-guide-to-perm-root-twrp-t3360883. Relax and take your time, Your in no hurry. I stabilized the process and reduced the number of steps to gain permanent root and unlock the bootloader.
Here it is....In Windows, Copy samsung_unlock_n4-fix & BETA-SuperSU-v2.71-20160331103524.zip to the Minimal ADB and Fastboot install folder location.
On Phone, after doing a factory reset in recovery and without a sim card, I skipped all the initial phone setup except for putting in my wifi password.
I rejected all popup offers and clicked don’t remind me later. I deleted the time widget to make room for shortcuts so I could work on the home screen.
Connect phone to usb as a Media Device then Copy these files to the phones internal storage.
1. Emotion-TW-5.1.1-nightly-r21-RC1-SM-N910P.zip
2. NewKingrootV4.85_C139_B255_en_release_2016_03_29_105203.apk
3. BETA-SuperSU-v2.71-20160331103524.zip
Disconnect usb cable and enable USB debugging, allow Unknown sources installations also I would change Display timeout to 10 min. and format your sd card. Close all resent apps. Reconnect usb cable (if and when prompted click Always allow usb debugging on the computer)
Install and open Kingroot on the phone go to the point that says "Root access is unavailable" DO NOT START ROOT yet WAIT!!! Close all resent apps and ok the popup about recent apps.
Pull the battery and if you haven’t already done it, install a formatted sd card. Power up the phone and connect usb cable.
{[Be ready to grant permission when asked by phone.}] Close all resent apps again. Open Kingroot and go to the point "Root access is unavailable" DO NOT start root yet, wait until the last second so the phone will remain stable. I would copy the name "samsung_unlock_n4-fix" from the actual file so it will be on your clipboard and you can right click it into the adb commands.
Start the program "Minimal ADB and Fastboot" and type the commands
(1) adb devices (if and when prompted click Always allow usb debugging on the phone)
(2) adb push samsung_unlock_n4-fix /data/local/tmp/
(3) adb shell
{[ HERE NOW Start Rooting with Kingroot once phone is rooted continues with adb commands }]
(4) su ( you have to grant permission on the phone and continue)
(5) cd /data/local/tmp/
(6) chmod 777 samsung_unlock_n4-fix
(7) chown root.root samsung_unlock_n4-fix
(8) ./samsung_unlock_n4-fix
Wait... Wait for the phone to go into a boot-loop then disconnect usb cable pull the battery and SD card.
Check in Download, you should now have MODE: Developer. The boot-loader is unlocked.
On computer close “Minimal ADB and Fastboot” and start Odin. Connect usb cable to flash twrp-3.0.2-0-trltevzw.tar.md5.
Here is a tricky part. As soon as Odin finishes and you can feel the phone vibrate off quickly pull the battery or it will reload stock recovery.
Next to last thing, reinstall battery and manually boot into recovery. Now you have a unlocked bootloader with permanent Kingroot root.
Now install Emotion-TW-5.1.1-nightly-r21-RC1-SM-N910P.zip then BETA-SuperSU-v2.71-20160331103524.zip with TWRP from internal storage do a Factory Reset with TWRP and it’s good to go.
I also used Odin to flashed the SM-N910V Developer Edition up to date with the retail BPA1 file found on Sammobile then used the direction above to convert it back to Developer Mode. Have Fun and less get busy before Verizon closes the window.
I think we should use Gatesjunior's Debloater program to block SDM.apk or we could get a over the air updated that could lock it back up.
Click to expand...
Click to collapse
Follow all steps and work like a charm thanks :good::good::good::good::good::good:
if we untick auto reboot we can access twrp after manual reboot without any problem
vvverma said:
Follow all steps and work like a charm thanks :good::good::good::good::good::good:
if we untick auto reboot we can access twrp after manual reboot without any problem
Click to expand...
Click to collapse
I have not tried the untick auto reboot. In should work in this case but be careful making changes to Odin.:fingers-crossed:
doctor-cool said:
I have not tried the untick auto reboot. In should work in this case but be careful making changes to Odin.:fingers-crossed:
Click to expand...
Click to collapse
That is a step mentioned in some of the other guides. It would make the experience a little less harrowing as during the last step people could simply power the phone back up in recovery themselves instead of having to try to pull the battery just after they feel the phone vibrate.
Point taken people can choose for themselves
MissionImprobable said:
That is a step mentioned in some of the other guides. It would make the experience a little less harrowing as during the last step people could simply power the phone back up in recovery themselves instead of having to try to pull the battery just after they feel the phone vibrate.
Click to expand...
Click to collapse
Thanks for the information. [/B]
Tested and EDITED untick auto reboot and other improvments. Works Great[/COLOR]
So glad there's another thread for this. Maybe my mailbox will stop blowing up.
It worked perfectly!! Thank you so much!
I was a little skeptical about that 910P kernel image, but no problems so far, and the SuperSU bootloop didn't occur this time.
I didn't even have to do a factory reset and it worked.
EDIT:
May have spoken too soon. I inserted my SD card and the screen went blank and the phone buzzed once, almost as if it had restarted. I held down the PWR and two VOL buttons to force restart it and I may be stuck at the Verizon logo screen. It hasn't rebooted, but it's not doing anything.
EDIT AGAIN:
I force-rebooted again on the Verizon screen and it booted up. No problems after formatting the SD card with a computer.
Zacharee1 said:
It worked perfectly!! Thank you so much!
I was a little skeptical about that 910P kernel image, but no problems so far, and the SuperSU bootloop didn't occur this time.
I didn't even have to do a factory reset and it worked.
EDIT:
May have spoken too soon. I inserted my SD card and the screen went blank and the phone buzzed once, almost as if it had restarted. I held down the PWR and two VOL buttons to force restart it and I may be stuck at the Verizon logo screen. It hasn't rebooted, but it's not doing anything.
EDIT AGAIN:
I force-rebooted again on the Verizon screen and it booted up. No problems after formatting the SD card with a computer.
Click to expand...
Click to collapse
Some people are having problems because they have already corrupted their phone rooting while it was unstable. They need to Factory Restore. Not only is Samsung and Verizon working to block root but so is Google. The SD Card need to be formatted with a PC.
doctor-cool said:
Some people are having problems because they have already corrupted their phone rooting while it was unstable. They need to Factory Restore. Not only is Samsung and Verizon working to block root but so is Google. The SD Card need to be formatted with a PC.
Click to expand...
Click to collapse
So the factory reset is a safety step?
For Security and to avoid corruption problems.
Zacharee1 said:
So the factory reset is a safety step?
Click to expand...
Click to collapse
At some time we all have given Google permission to gather information. For that reason and because Kingroot is connected to a Chinese Server. I would prefer not having my information on the phone when rooting with Kingroot.
I would call Kingrooting with your personal accounts on the phone HOT ROOTING. If I were going to HOT ROOT I would remove all my personal accounts from the phone. I have done it and it will work but I prefer to do a factory restore.
doctor-cool said:
At some time we all have given Google permission to gather information. For that reason and because Kingroot is connected to a Chinese Server. I would prefer not having my information on the phone when rooting with Kingroot.
I would call Kingrooting with your personal accounts on the phone HOT ROOTING. If I were going to HOT ROOT I would remove all my personal accounts from the phone. I have done it and it will work but I prefer to do a factory restore.
Click to expand...
Click to collapse
Oh, so privacy. Well I have nothing very important on this phone, so that's fine for me. If I do this on someone else's phone though, I'll definitely remember that.
I am an idiot that is stoned and had no issues following these directions thanks! Stupid question.. the stuff it copied to my sdcard during rooting.. do i need to keep that for anything? or is it basically used as swap space?
Icetech3 said:
I am an idiot that is stoned and had no issues following these directions thanks! Stupid question.. the stuff it copied to my sdcard during rooting.. do i need to keep that for anything? or is it basically used as swap space?
Click to expand...
Click to collapse
I read somewhere you should keep it because someday we might be able to make a backup out of it. I deleted mine. I am able to use Odin to restore the original N910VVRU2BPA1 any time I want it.
Need help please noon
So I followed all the steps and achieved permanent root and Developer Edition everything worked great I went back into the T wrp recovery 2 wipe my cash and ended up wiping everything including operating system so someone told me to just install a custom rom I install custom ROM two different ones actually the new cm marshmallow and another one both of them do not recognize my SIM card I am using a Straight Talk SIM inside of a Verizon Note 4 I don't know what to do at this point can someone please help me thank you for the great unlock directions extremely user-friendly much appreciated.
Was curious... i cannot get TWRP to see my external SD.. anyone else have this issue? not a major thing just annoying...
And to the guy above.. i put on the CM13 rom and using a ting sim it works fine.. so not sure.. sorry.
doctor-cool said:
At some time we all have given Google permission to gather information. For that reason and because Kingroot is connected to a Chinese Server. I would prefer not having my information on the phone when rooting with Kingroot.
I would call Kingrooting with your personal accounts on the phone HOT ROOTING. If I were going to HOT ROOT I would remove all my personal accounts from the phone. I have done it and it will work but I prefer to do a factory restore.
Click to expand...
Click to collapse
I would also format, not just wipe your data partition when you flash your first ROM as well.
---------- Post added at 03:26 PM ---------- Previous post was at 03:24 PM ----------
Icetech3 said:
Was curious... i cannot get TWRP to see my external SD.. anyone else have this issue? not a major thing just annoying...
And to the guy above.. i put on the CM13 rom and using a ting sim it works fine.. so not sure.. sorry.
Click to expand...
Click to collapse
You're not the first here to have problems with sd cards in TWRP. There are several threads here on how to fix that.
douger1957 said:
I would also format, not just wipe your data partition when you flash your first ROM as well.
---------- Post added at 03:26 PM ---------- Previous post was at 03:24 PM ----------
You're not the first here to have problems with sd cards in TWRP. There are several threads here on how to fix that.
Click to expand...
Click to collapse
Ah thanks.. will do a search
Am considering trying this, my thanks to doctor-cool for providing the instructions. I had kinda given up on being able to root my Note 4, and am attempting to get up-to-date with what's going on at this point.
Out of interest, are there any methods for doing this on a Verizon Note 4 that can be accomplished without the use of KingRoot or is that a must have? I'd really like to finally get this done, but have to admit to some reluctance over the unknowns that have been discussed on XDA when it comes to KingRoot. Honestly, I'm not even fully convinced that wiping your phone in advance of using KR will definitely resolve all potential problems that may exist. Would like to find a solution that just bypasses it altogether.
mray99 said:
Am considering trying this, my thanks to doctor-cool for providing the instructions. I had kinda given up on being able to root my Note 4, and am attempting to get up-to-date with what's going on at this point.
Out of interest, are there any methods for doing this on a Verizon Note 4 that can be accomplished without the use of KingRoot or is that a must have? I'd really like to finally get this done, but have to admit to some reluctance over the unknowns that have been discussed on XDA when it comes to KingRoot. Honestly, I'm not even fully convinced that wiping your phone in advance of using KR will definitely resolve all potential problems that may exist. Would like to find a solution that just bypasses it altogether.
Click to expand...
Click to collapse
Unfortunately, no.
My suggestion would be to disable wi-fi and remove your sim card until you can format your data partition.
douger1957 said:
Unfortunately, no.
My suggestion would be to disable wi-fi and remove your sim card until you can format your data partition.
Click to expand...
Click to collapse
Thanks for your response. I'd thought about that or similar solutions. The problem is there's so many question marks around KingRoot -- I figure if you're thinking it out, one of those questions has to be, what if anything does it leave on your phone even after you've finished the sort of process described here and removed KR? I'd feel so much more comfortable were it a solution that comes from one of the guys that have been around here for a long while. It seems the Note 4 agita never fully ends.
Related
WELCOME
to the WINDOWS Bell Atrix 0.37.4 update guide on how to go from 2.2.1 to 2.2.2! (without problems )
===================================================================================================================================================
WARNING
Do not attempt any of these steps if you are on an international firmware. You will probably brick your phone. This guide was made to help people who are having trouble updating from 0.37.4 to the new bell 2.2.2.
Bell users:
Please note that flashing files to your phone and modifying system contents can brick your phone. However, the method I am sharing worked flawlessly for myself and others.
Before beginning:
You need root access on your phone. If you are not sure what root access is, you shouldn't be having problems updating, because you wouldn't have modified system files. Regardless, here is a thread on how to root a bell atrix.
Guide:
Step 1:
Download Titanium Backup from android marketplace, and back up all of your apps and games. This is necessary only if you want to have an easy reinstall of most of your apps and games, as we will be wiping data off of the phone. (if you have another backup program, it should work just fine. Make sure it saves the backup to a folder that you can copy onto your computer)
Step 2:
Remove the external microsd card from your phone (if you have one). This is simply for safety purposes, as we don't want any data being wiped off of this (we don't need the microsd any time during the process).
Now, copy (or cut) all of the data from your internal storage to your computer, just in case, and we are about to wipe data off of your phone.
Step 3:
Format your phone. This can be done two different ways.
The first method is the simplest:
Menu -> Settings -> Privacy -> Factory Data Reset.
The second method (if for some reason you can't do the first) is:
Turn off your phone. Turn it back on while holding the volume down key. It will show the word FastBoot. Keep pressing the volume down key until you reach android recovery. Press the volume up key. Wait patiently. Once a little man appears, there should be a menu. If there isn't, press both the bottom left and bottom right corners of the screen simultaneously. That should bring up the menu. (give it a few tries, it takes me 8-10 lol). From this menu, press volume down until you get to wipe data, then press ok on the bottom left corner (give this a few tries too).
Step 4:
Your phone should now be acting like you just bought it. It should, upon reboot, prompt you to enter your country.. etc. Make sure you either use your existing motoblur account, or create a new one. It is just important for you to have a blur account for the update process (my phone gave me hell when I didn't have one). Do what is necessary to get your phone up and running again.
Step 5:
This is where the fun begins. Reroot your phone usinggladroot(or any other root method you know how to use). Download Superuser, install it, then download Root Checker from android marketplace to confirm root access. Whenever a Superuser popup comes up, confirm / say yes (and make sure the remember box is checked).
Once you have confirmed root access, proceed to the next step.
Step 6:
Download Tenfar's CWM recovery, and install the apk on your phone. Follow the instructions inside of the app to install recovery and enable recovery mode.
Step 7:
Download these two files, and put them in the root of your internal storage. (By root, I mean in the very first directory, ie. F:/put file here)
http://dl.dropbox.com/u/23800522/Blur_Version.0.37.4.MB860.BellMobility.en.CA.zip
http://dl.dropbox.com/u/23800522/Blur_Version.0.37.4.MB860.BellMobility.en.CA.crc
Step 8:
We are now ready to start fixing up the phone, and preparing it for the update.
First of all, we need to make sure ADB (the program we will be using on our computer) has root access on our atrix when it is plugged into our computer via usb.
Before plugging in your atrix via usb, enable USB debugging via:
Menu-> Settings-> Applications -> Development -> Check USB Debugging.
Now plug the atrix into your computer, and set the USB connection to: None. Check to make sure USB Debugging is in your notification bar.
Download these files onto your computer if you do not have the adb files yet. Extract the files preferably into the root of your hard drive (ie C:/ ) is just makes things easier this way.
Now open up command prompt.
If it is not in the directory where the adb.exe file is, you will need to type:
cd C:/
into command prompt. This says "change directory to C:/" (or wherever you put the files, could be cd C:/Program Files/ could be anywhere. wherever you extracted them to.)
Once in this new directory, type this into command prompt and press enter:
adb devices
If a device pops up (mine said TY290380 or something like that) that means that it recognizes your atrix. That is great news. We now have to enable ADB root access on the phone.
If nothing pops up, or it says some sort of error, you are not in the directory where adb.exe is located. Navigate to the proper directory.
Now, type the following command:
adb shell
One of two things can happen here. It will either create a new line with a $, or a new like with a #.
blah blah C:/ adb shell
$
or
blah blah C:/ adb shell
#
If a $ came up, you need to prepare a command BUT DONT PRESS ENTER YET. Type in "su", but dont hit enter. Now go to your phone and unlock your screen. After you unlock your screen and can see your homepages, press enter on your keyboard doing the "su" command. Now look at your phone. A superuser request should appear. Hit yes, and make sure that "remember" is checked. If not, it is ok, as long as the su command went through on your screen. it should now show a # on your command line.
For those of you who had a # on your command line, type in shsu and hit enter, then type in su and hit enter (just to play it safe ).
We are now ready to flash the first files to our device. You can close the command window.
Step 9:
Download this file. It is the original unmodified system partitions and files (thank you NFHimself). Extract the file using winrar or 7zip.
Change your USB connection on your phone to: Mass Storage, wait a minute or so, and then put the extracted file "mmcblk0p12.bin" in your internal storage on your phone. (ie. F:/ )
Step 10:
Dismount the phone from your usb devices via windows hardware manager. Unplug your atrix from your usb. Reconnect it, and choose connection type: none. Make sure usb debugging is in your notification bar.
Now, re-open command prompt. Renavigate to the directory where your adb files are located using the "cd C:/" command (or wherever your files are). Once there, perform "adb devices". Make sure a device is there. Next, perform the command "adb shell". You should have a #. Type in shsu, hit enter, now su, hit enter (just to be sure).
Now copy this command and hit enter (you have to right click paste into cmd prompt):
dd if=/sdcard/mmcblk0p12.bin of=/dev/block/mmcblk0p12
This will begin the flashing process, which will restore all stock system partitions allowing us to update properly. However, it's not over yet .
Mine took a few mins, do not panic. Simply wait for it to say "Complete" in x amount of seconds or whatever. Your phone may crash, but it should boot up fine (if not, that is why we have installed Tenfar's CWM )
After it is complete, turn off your phone. Keep it connected to the computer.
Step 11:
Boot up your phone holding volume down. Navigate to android recovery using volume down. Volume up. Open up the menu with the bottom left bottom right press. Go to clear cache. Press OK. Now reboot your phone.
You can now update through settings and it should work properly. If not, respond in here and I will guide you a few more codes, but it should work.
The phone should now boot up, and it should be running android version 2.2.2.
Regard this thread for how to root the new bell update. Just a heads up, it wiped my internal storage and SD card, so remove and backup that stuff. Lol. But it did root.
Now reinstall your backup program, and get your phone going again!
If you have any questions or problems please post them here and I will reply ASAP, personal messages are hard to keep track of. Thanks again to NFHimself for supplying files and code.
Cheers!
PS: I just finished exams, yay!?
Please say if you notice anything misspelled, etc. Gratzi
You are the f***in man for posting this. Thumbs up to NFHimself for his contribution too!
Links
Crud, your links for the files in dropbox aren't working.
Silvercloak5098 said:
Crud, your links for the files in dropbox aren't working.
Click to expand...
Click to collapse
You sure? I clicked them both myself to make sure they work.
How don't they work?
FYI: I'm reuploading them to megaupload as we speak anyways
IrshaadH said:
You are the f***in man for posting this. Thumbs up to NFHimself for his contribution too!
Click to expand...
Click to collapse
When I got my phone to update to 2.2.2 it felt amazing.
I just wanted to spread the love
Thank you so much!! You don't know how frustrated I've been all day! The only problem I had was that my root was gone after I flashed it, but I just updated through settings and it worked flawlessly
tyrkk said:
Thank you so much!! You don't know how frustrated I've been all day! The only problem I had was that my root was gone after I flashed it, but I just updated through settings and it worked flawlessly
Click to expand...
Click to collapse
NP! Just glad you got your update.
I changed the steps so that the last step is simply updating via settings. If that doesn't work for people I will help them out in this thread with the more complicated coding way.
Cheers!
Couldn't step ten be used to revert to stock from an international sbf?
Sent from my MB860 using XDA App
Ok..quick question. You said not to install for those using any international version. I have run the Telstra sbf at one point..as well as had the Greyblur rom on. Before installing the Telstra I had made a backup using CWM, and a few days ago I had to revert to my old backup due to a rogue app. In my About phone, it tells me my System version is Blur_Vision.0.37.4MB860.BellMobility.en.CA with a Build number of OLYA_U4_0.37.4.
Would this be still safe for me to do seeing's how it seems i'm back to my "Bell sbf" or is there still going to be some Telstra files in there that could cause me some problems?
I made it through to the end of step 10 and the phone was looking good. Then when I shut off the phone and tried to go into Android Recovery, it keeps going to the triangle symbol and I have to reboot.
After a couple times of that I decided to check Android Recovery from inside the app list and it said I no longer have root access.
Any ideas what to do now??
Rickroller said:
Ok..quick question. You said not to install for those using any international version. I have run the Telstra sbf at one point..as well as had the Greyblur rom on. Before installing the Telstra I had made a backup using CWM, and a few days ago I had to revert to my old backup due to a rogue app. In my About phone, it tells me my System version is Blur_Vision.0.37.4MB860.BellMobility.en.CA with a Build number of OLYA_U4_0.37.4.
Would this be still safe for me to do seeing's how it seems i'm back to my "Bell sbf" or is there still going to be some Telstra files in there that could cause me some problems?
Click to expand...
Click to collapse
Depends on whether or not you're still on the telestra framework. If you're confident with your ability to recover from a potential brick via early usb enumeration id go for it.
bdking2 said:
I made it through to the end of step 10 and the phone was looking good. Then when I shut off the phone and tried to go into Android Recovery, it keeps going to the triangle symbol and I have to reboot.
After a couple times of that I decided to check Android Recovery from inside the app list and it said I no longer have root access.
Any ideas what to do now??
Click to expand...
Click to collapse
Edit: See my lower post first, then this one
Open up the menu in android recovery by tapping both the bottom left corner and bottom right corner of the screen at the same time.
It should show you an error if there was one.
Does the phone boot fine?
You should lose root access. When you flash the .bin it restores your bell to stock like you got it from the store. That allows you to update.
Most importantly open up the recovery menu when you see the triangle by tapping the bottom left and right corners simultaneously. Itll take a few tries.
IrshaadH said:
Couldn't step ten be used to revert to stock from an international sbf?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
No, since you are on an international framework it will probably brick your phone.
That .bin file contains the system partitions from the stock bell framework.
If you want to try go ahead but I think the odds are against you
bdking2 said:
I made it through to the end of step 10 and the phone was looking good. Then when I shut off the phone and tried to go into Android Recovery, it keeps going to the triangle symbol and I have to reboot.
After a couple times of that I decided to check Android Recovery from inside the app list and it said I no longer have root access.
Any ideas what to do now??
Click to expand...
Click to collapse
Bdking I have another idea. if you can boot up your phone, re-root it using any normal methods, then install CWM. Boot into CWM recovery mode and clear the cache from there. Then do step 11.
Chances are the update file is hanging out in your cache so when the android recovery sees that it immediately tries to install the messed up package.
Thats why you should clear cache on CWm because it wont try to install anything automatically from the cache. Then do step 11.
Hope it helps, Mag.
No my phone boots fine. And now I can get into android recovery to clear cache and have done so. But before I read your response I rooted my phone again.
Should I just restart everything?
bdking2 said:
No my phone boots fine. And now I can get into android recovery to clear cache and have done so. But before I read your response I rooted my phone again.
Should I just restart everything?
Click to expand...
Click to collapse
No you should be good to go try to update via settings.
You flashed the bin right?
If so you're good to go
I flashed the bin for sure. But wasn't sure about the process because I rooted again.
bdking2 said:
I flashed the bin for sure. But wasn't sure about the process because I rooted again.
Click to expand...
Click to collapse
Root shouldnt change anything only deodexing/webtop mod/ theming should mess it up.
If you flashed the bin go for it. Worst thing that can happen is that the update fails.
In that case, redo step 10, then do step 11.
Magnetox said:
No, since you are on an international framework it will probably brick your phone.
That .bin file contains the system partitions from the stock bell framework.
If you want to try go ahead but I think the odds are against you
Click to expand...
Click to collapse
So, there is absolutely NO WAY I can get back to the Bell framework from 2.1.1 without an actual Bell sbf?
IrshaadH said:
So, there is absolutely NO WAY I can get back to the Bell framework from 2.1.1 without an actual Bell sbf?
Click to expand...
Click to collapse
NFHimself knows a way.
But hes a master of code.
Pm him, he might be able to help you.
He was happy he got his bell 2.2.2 thoough. so im assuming it wasnt easy.
I'm NOT responsible if you bork your tablet because you can't follow simple instructions!
I've just made a simple batch file with adb, and the recovery file all in one zip for y'all.
Make sure you've unlocked your bootloader by following instructions HERE
1) Download Chainfires latest root and copy to Your Internal SD card on your tablet
2) Download and install DRIVERS
3) Download and extract nexus7_2013_recovery_A+.zip to a folder on your PC.
4) Open folder where you extranted nexus7_2013_recovery.zip
5) Make sure your tablet is powered on, and connected to the PC, then click on "Nexus7.bat" and follow instructions. (If your PC is installing drivers once it boots into fastboot, WAIT until the drivers are installed before clicking next!)
6) Be ready and hold volume up as the tablet will restart automatically, keep holding volume up until you reach the TWRP screen
7) Once in TWRP flash SuperSU/UPDATE-SuperSU-v1.43.zip
8) when you reboot Superuser will be updated automatically by the Play Store
Enjoy!
BIG thanks to Chainfire for his root, and team win recovery project for their fast work on the recovery!
07/30/13 Updated SuperSu link to latest revision (ver 1.51).
07/29/13 Updated SuperSu link to latest revision (ver 1.50).
For those that couldn't find their azzes if a target was painted on it, here's a link to the video.
http://www.youtube.com/watch?feature=player_embedded&v=UpcTMTu-5Qc
I'm NOT responsible if you bork your tablet because you can't follow simple instructions!
I got through the first 5 steps. However the tablet rebooted to the OS. At step 6 how do you reboot into recovery?
Ravynmagi said:
I got through the first 5 steps. However the tablet rebooted to the OS. At step 6 how do you reboot into recovery?
Click to expand...
Click to collapse
ADB reboot recovery
Thank you very much for this, worked for me on the second try. Might I be so bold to suggest these changes to your steps to make them more clear? If not I will edit my post.
Edit - Didn't see you had a video. It didn't boot me into fastboot. I'm sure I did something wrong. Thanks again!!!
evodon84 said:
Thank you very much for this, worked for me on the second try. Might I be so bold to suggest these changes to your steps to make them more clear? If not I will edit my post.
Make sure you've unlocked your bootloader by following instructions HERE
1) Download Chainfires latest root and copy to SD card
2) Download and install DRIVERS
3) Download and extract nexus7_2013_recovery_A+.zip to a folder on your PC.
4) Open folder where you extranted nexus7_2013_recovery.zip
5) Power off your device.
6) Once powered down, hold Volume Down and Power. (this will boot you into fasboot)
7) Make sure your tablet is connected to the PC, then click on "Nexus7.bat" and follow instructions. (If your PC is installing drivers once it boots into fastboot, WAIT until the drivers are installed before clicking next!)
8) Be ready and hold volume up as the tablet will restart automatically, keep holding volume up until you reach the TWRP screen
9) Once in TWRP flash SuperSU/UPDATE-SuperSU-v1.43.zip
10) when you reboot Superuser will be updated automatically by the Play Store
Click to expand...
Click to collapse
Umm thanks, but the bat file boots you into fastboot...watch the video
When you say copy chainfire's SU to the SD CARD you mean to the root of the directory you get when you connect via MTP, right? Where the Alarms/Download/Movies/Music etc directories are, right?
I see this syntax used a lot "copy to SD card" when there's not really an SD card, so it's a bit confusing (not just here). Especially since there's no obvious SDcard directory exposed when you connect via MTP to a PC.
greenmky said:
When you say copy chainfire's SU to the SD CARD you mean to the root of the directory you get when you connect via MTP, right? Where the Alarms/Download/Movies/Music etc directories are, right?
I see this syntax used a lot "copy to SD card" when there's not really an SD card, so it's a bit confusing (not just here). Especially since there's no obvious SDcard directory exposed when you connect via MTP to a PC.
Click to expand...
Click to collapse
Yes, you may want to create a folder in there for organizing all your flashable zips
greenmky said:
When you say copy chainfire's SU to the SD CARD you mean to the root of the directory you get when you connect via MTP, right? Where the Alarms/Download/Movies/Music etc directories are, right?
I see this syntax used a lot "copy to SD card" when there's not really an SD card, so it's a bit confusing (not just here). Especially since there's no obvious SDcard directory exposed when you connect via MTP to a PC.
Click to expand...
Click to collapse
Yes, your INTERNAL SD CARD
Thanks guys, I haven't done much rooting / flashing with devices without SD cards before. I used the Nexus 7 toolkit to root the old Nexus 7. Everything I rooted before that had a real SD card to dump zips on - wanted to make sure where TWRP could access.
Looks like I'm still stuck at step 6. After running ADB reboot recovery, the tablet reboots and I see the dead Android with the red triangle. So I'm guessing Recovery didn't get flashed right.
So I rebooted it again. Ran the Nexus7.bat. It boots to Fastboot okay, and seems to be successfully after pressing enter a couple times. But ADB reboot recovery results in the red triangle again.
evodon84 said:
Thank you very much for this, worked for me on the second try. Might I be so bold to suggest these changes to your steps to make them more clear? If not I will edit my post.
Edit - Didn't see you had a video. It didn't boot me into fastboot. I'm sure I did something wrong. Thanks again!!!
Click to expand...
Click to collapse
I'm ammending the video now to reflect your suggestion about booting right into recovery afterwards...thank you
Ravynmagi said:
Looks like I'm still stuck at step 6. After running ADB reboot recovery, the tablet reboots and I see the dead Android with the red triangle. So I'm guessing Recovery didn't get flashed right.
So I rebooted it again. Ran the Nexus7.bat. It boots to Fastboot okay, and seems to be successfully after pressing enter a couple times. But ADB reboot recovery results in the red triangle again.
Click to expand...
Click to collapse
What error message are you getting at the end of the flash, or does it say success...watch the screen as it's flashing.
I just ammended the video, follow along
Ravynmagi said:
Looks like I'm still stuck at step 6. After running ADB reboot recovery, the tablet reboots and I see the dead Android with the red triangle. So I'm guessing Recovery didn't get flashed right.
So I rebooted it again. Ran the Nexus7.bat. It boots to Fastboot okay, and seems to be successfully after pressing enter a couple times. But ADB reboot recovery results in the red triangle again.
Click to expand...
Click to collapse
Try going directly into recovery right after the batch file finished and restarts your device. I had the same problem if I let my device boot and then reboot into recovery.
ATGAdmin said:
I'm ammending the video now to reflect your suggestion about booting right into recovery afterwards...thank you
Click to expand...
Click to collapse
Cool, glad I could be of some small assistance.
Rooted just fine, thanks! Saved me typing some adb commands and such.
evodon84 said:
Try going directly into recovery right after the batch file finished and restarts your device. I had the same problem if I let my device boot and then reboot into recovery.
Click to expand...
Click to collapse
Yes, that was the problem. I started doing the steps manually and instead of letting it reboot after flashing the recovery.img, I went straight to Recovery from Fastboot and it worked fine. Thanks.
Ravynmagi said:
Yes, that was the problem. I started doing the steps manually and instead of letting it reboot after flashing the recovery.img, I went straight to Recovery from Fastboot and it worked fine. Thanks.
Click to expand...
Click to collapse
I dont know what happened but this did not work, I can still boot my device, but now I have no recovery installed. If I attempt to boot into recovery, i get the red triangle underneath it says *No command* I have tried to research the problem here but no luck in getting TWRP to flash.
Just curious why was this moved out of development? I'm glad I caught it yesterday before it was moved. All the past android devices I've owned have had their root instructions under a development forum here on XDA. I would have assumed since this device was so new the root instructions where not available yet. I admit it would have been my fault for not searching but as I said the precedence has been search the development forum for root guide. Just a thought, I know you moderators are obviously forum gurus..but I think a good portion of the community is used to finding them their. Even the OP thought it was the proper location.
samg77 said:
Just curious why was this moved out of development? I'm glad I caught it yesterday before it was moved. All the past android devices I've owned have had their root instructions under a development forum here on XDA. I would have assumed since this device was so new the root instructions where not available yet. I admit it would have been my fault for not searching but as I said the precedence has been search the development forum for root guide. Just a thought, I know you moderators are obviously forum gurus..but I think a good portion of the community is used to finding them their. Even the OP thought it was the proper location.
Click to expand...
Click to collapse
There's no telling why they do what they do. I don't question it anymore lol
Sent using XDA premium on my Nexus 7 (2) tablet.
ATGAdmin said:
There's no telling why they do what they do. I don't question it anymore lol
Sent using XDA premium on my Nexus 7 (2) tablet.
Click to expand...
Click to collapse
Well honestly I posted the question mainly to have an intellectual conversion regarding allowing this to be in development until a alternate root method is posted.I mean I am not an android developer but I am a systems engineer for twenty years (by this I'm just simply pointing out I am of above average technical skill) and simply because I've always my root method for the past ...I'd estimate about a dozen android models I've rooted found root under development. So some others might miss it too
samg77 said:
Well honestly I posted the question mainly to have an intellectual conversion regarding allowing this to be in development until a alternate root method is posted.I mean I am not an android developer but I am a systems engineer for twenty years (by this I'm just simply pointing out I am of above average technical skill) and simply because I've always my root method for the past ...I'd estimate about a dozen android models I've rooted found root under development. So some others might miss it too
Click to expand...
Click to collapse
You're preaching to the choir bro, I'm with ya.
Sent using XDA premium on my Nexus 7 (2) tablet.
Please note: This will not recover you from a bricked device. This applies to bootloops caused by modifications you made, AFTER successfully rooting.
So you changed your build.prop or deleted a system file you shouldn't have? Your phone is now constantly rebooting? Your variant doesn't have a KDZ available? Here's an easy, albeit time consuming method to recover. (without TWRP or KDZ and no data loss)
First off, if you haven't caused a bootloop yet and you are doing a lot of modifications, do the following. Go to SuperSU and allow su requests on boot. This will allow you to fix minor problems during the bootloop, such as restoring your backed up build.prop or other modified system file. Many times, people will forget to set permissions on a file, especially build.prop. This will cause a bootloop.
If you GRANTED su requests during boot in SuperSU:
Say you set the wrong permissions on build.prop:
While your phone is bootlooping, plug it into your PC, then execute the following commands:
Code:
adb shell
$ stop
$ su
# chmod 0644 /system/build.prop
# reboot
Say you screwed the build.prop up and need to restore a backup you made to your sdcard:
Code:
adb shell
$ stop
$ su
# cp /sdcard/build.prop /system/build.prop
# chmod 0644 /system/build.prop
# reboot
If you DID NOT grant su requests during boot in SuperSU (or if you have tried and failed other methods to recover):
While your phone is bootlooping, plug it into your PC, then do the following:
1. Locate the image you used to root your phone.
2. If the image is on your phone still, just re-root. Your phone will be fixed.
3. If you deleted it from your internal SD card continue to step 4.
4. Open command prompt in folder on your PC containing image, then issue the following command:
This will take a VERY long time (20-30 minutes)
Code:
adb push system_image_name.img /sdcard/system_image_name.img
Note: If you don't have adb mapped to your environment variables, move the image into your platform-tools folder, or whichever folder contains adb. Then run the above command.
5. Re-root
Can't wait to try this when i get home. I soft bricked my LG G4 with a bad system.img so i am trying to restore. Is this actually going to allow me to push the img file back to the phone even though i cant boot?
minirx7 said:
Can't wait to try this when i get home. I soft bricked my LG G4 with a bad system.img so i am trying to restore. Is this actually going to allow me to push the img file back to the phone even though i cant boot?
Click to expand...
Click to collapse
In your case I'd say 50/50. It depends if it at least gets to the part of the boot sequence which enables adb.
I KDZ back to stock, then re-rooted to fix mine. No data loss.
Sent from my VS986 using XDA Free mobile app
Meibs81 said:
I KDZ back to stock, then re-rooted to fix mine. No data loss.
Sent from my VS986 using XDA Free mobile app
Click to expand...
Click to collapse
That is a great method to use, but several variants don't have KDZs :crying:
I'm on the Sprint variant and am getting the Security Error loop. I have no system.img yet, however I can't seem to adb push anything (or see the phone with ADB at all)... am I doing something wrong?
pcrhckyman said:
I'm on the Sprint variant and am getting the Security Error loop. I have no system.img yet, however I can't seem to adb push anything (or see the phone with ADB at all)... am I doing something wrong?
Click to expand...
Click to collapse
That would not be considered a bootloop. That's a brick. I'm sorry, but in your case unless you already had a system image on your phone to flash, you are SOL until we get a TOT file.
tabp0le said:
In your case I'd say 50/50. It depends if it at least gets to the part of the boot sequence which enables adb.
Click to expand...
Click to collapse
Well i am able to access factory reset and i am able to get into download mode and see it from the send_command tool.. HOpe that means my odds are 100% instead!
minirx7 said:
Well i am able to access factory reset and i am able to get into download mode and see it from the send_command tool.. HOpe that means my odds are 100% instead!
Click to expand...
Click to collapse
Not necessarily. Download mode and factory reset(recovery) are located on different partitions than boot and system. Do you at least get to the carrier boot animation while attempting to boot? If so, your chances are good. If not, your chances are bad. The initial commands, including adb push have to be run while the phone is attempting to boot. NOT in download mode or recovery.
tabp0le said:
In your case I'd say 50/50. It depends if it at least gets to the part of the boot sequence which enables adb.
Click to expand...
Click to collapse
tabp0le said:
Not necessarily. Download mode and factory reset(recovery) are located on different partitions than boot and system. Do you at least get to the carrier boot animation while attempting to boot? If so, your chances are good. If not, your chances are bad. The initial commands, including adb push have to be run while the phone is attempting to boot. NOT in download mode or recovery.
Click to expand...
Click to collapse
I get stuck on the LG logo where the light flashes on and off. While this happens if the phone is connected to the computer i hear the USB connection sound in windows. I will be trying it in a few hours.. hope it works!
minirx7 said:
I get stuck on the LG logo where the light flashes on and off. While this happens if the phone is connected to the computer i hear the USB connection sound in windows. I will be trying it in a few hours.. hope it works!
Click to expand...
Click to collapse
You may be able to do it then. Let us know how it goes!
Delete
Peeptastic said:
Can I use this method to solve my particular problem (bypassing setup - I cannot move forward in the setup after a hard reset). Thanks (Can give you more info if you need it)
Click to expand...
Click to collapse
You may be able to. Does your phone boot? How far does it get in the booting process? If you get to initial phone setup, and can't get to the settings app to enable developer options and debugging, then you probably can't use this.. I'm not sure it would work, but you could try-During boot, debugging might enabled by default. (I'm not sure) Right when your bootanimation comes on you might be able to run the command:
Code:
adb shell stop
Then run the rest of the commands/follow this guide. It would be worth a shot.
Delete
Peeptastic said:
I will try it. I can get into the phone to the screen right after entering wifi, then it just stalls. It doesn't freeze, but it also doesn't go anywhere. This is with wifi and data (I left the phone on for a bit and data picked up). If it's related, I turned on Voice Assistance and when the phone gets to the first set up screen she says something about Google play services not working and then "Hangouts needs Google Play services". That could be why I can't move on.....
---------- Post added at 05:10 PM ---------- Previous post was at 05:07 PM ----------
I hear windows chime when it starts up, and the computer charges the phone. Running your command tells me: error: device not found.
Click to expand...
Click to collapse
How did you get in this situation to begin with? Are you able to get into settings at all?
Delete
Peeptastic said:
Factory reset because of the Google play error. Only it looks like Factory reset didn't fix it. And nope, can't get into settings because I can't get out of the set up screen (setup like when you first turn on the phone out of the box). I can get to download mode and stock recovery. As far as I know, there is no way to skip the original LG setup (clockwise button press doesn't work).
Can I adb sideload the image and try that way
Click to expand...
Click to collapse
Unfortunately that will not work. adb sideload is only for flashing .zip files.
tabp0le said:
Unfortunately that will not work. adb sideload is only for flashing .zip files.
Click to expand...
Click to collapse
Delete
every time I run the command while in bootloop it says "Device not found"
sarwaria23 said:
every time I run the command while in bootloop it says "Device not found"
Click to expand...
Click to collapse
This is what is happening to me too. I can see that the phone during boot loop is recognized. I check the device drivers and it shows up under windows as LG.
Crap. not good.
Hello. I have a few questions on rooting this phone. (My first time rooting)
First off, Is this the same model as the ze550kl (I assume so but not 100% sure). I have attempted to root this phone through the instructions provided in posts on this website for model ze550kl but I must be doing something wrong with the programs ect. I have never rooted a phone and so this is my first try and I would really like a full in detail screenshot follow through if available to do with the programs once downloaded and any other programs you may need on windows 10 to get to where I need to be. I dislike the zenui so much that is my main reason to root the phone is to remove this and other bloatware as well as some of my friends have some apps that are pretty neat that I would like that are only available through root.. I have also tried other methods posted on YouTube but I think I'm doing something wrong on all of my attempts. I would also like to know if there is a way to make a backup of the original files prior to rooting so I can send my phone in because I have a 2 year warantee if something was to happen (dropped, broken, ect.). In relation to the screenshots if there is any files that have to be placed on the phones hard drive from something I download off the internet please state this specifically, I believe that one or 2 ways I have seen required this but it seems vauge and I don't think it was done correctly by me. I am great at following detailed instructions but I don't know what exactly it is I need to do as I have never done this before so if something has to have a specific name please note that.
Thank you for the help.
My ZF2L should be showing up any minute now, so I'll let you know when it gets here. I'm no expert, but I've been rooting my Android devices since 2009. I think I can help you out.
HampTheToker said:
My ZF2L should be showing up any minute now, so I'll let you know when it gets here. I'm no expert, but I've been rooting my Android devices since 2009. I think I can help you out.
Click to expand...
Click to collapse
Thank you, I think I'm just missing an important step. The zenui just isn't my style. Will be nice to be able to remove
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 02:07 PM ---------- Previous post was at 01:28 PM ----------
Yeah, I think you just need more comprehensive instructions. It happens from time to time. From what I can tell so far, it's a pretty straightforward process for those that are familiar with root, but to a beginner it can be a bit much. As soon as mah lazah is dunna chargin' I'll walk you through the steps I took to root it, install custom recovery, and make a backup of your entire system just in case you ever need to restore your phone to a stock-rooted-but otherwise unmodified state. I should have something up in the next couple hours ?
Updated, rooted, and installed custom recovery. I'll post a short write-up shortly.
First off, I'm going to answer your questions since I didn't previously.
Sorvas33 said:
First off, Is this the same model as the ze550kl (I assume so but not 100% sure).
Click to expand...
Click to collapse
No, they're different, but I'm not entirely sure by how much. I'm 100% sure that they're probably maybe 90% or so compatible, but there are differences. I just don't know them without checking. I wouldn't go flashing anything that doesn't explicitly state that it's for the 551 or is compatible or has had a 551 user test and report success. There are some things that are kind of universal (and we'll get into that a little), but for now let's just stick with using caution.
Sorvas33 said:
I would also like to know if there is a way to make a backup of the original files prior to rooting so I can send my phone in because I have a 2 year warantee if something was to happen (dropped, broken, ect.)
Click to expand...
Click to collapse
We'll make a backup using TWRP, but you'll have to be rooted. A TWRP backup (or nandroid backup) is like a snapshot of your current system. You can customize it and only backup certain parts of the system as well as restore certain parts, but I wouldn't worry about that. Most of the time you'll want a complete backup, anyway. But, to answer your question, no, you'll have to be rooted, but you can always unroot from the phone using the Supersu app. If the damage is physical an unrooted backup wouldn't matter anyway.
So, here's my (hopefully) brief write-up to acquire root, install recovery, make a backup, and ,optionally, install the Xposed framework. Before getting started be sure to have plugged your phone into your computer for Windows to download and install drivers for your ZF2L. Also, you will need to download and install adb in order to use command prompt to flash files to your phone. This link will take you to a thread here at XDA for Minimal ADB and Fastboot. This is the easiest way to install and use adb and fastboot on your computer. Once you have it installed you can proceed to the next steps.
First, you'll need to unlock your bootloader using the app found here. It's in a .zip files for whatever reason, so you'll need to use 7zip or WinZip or WinRAR or something on your computer to extract it and install to your phone. You can plug your phone in and place the extracted app on your external or internal storage or use a cloud storage app like Dropbox or Google Drive to transfer it to your phone. If you plug it in and place on your internal or external storage, then you'll need to use File Manager (it's a stock app) to find and install it. Once installed just run the app. It's extremely user friendly and straightforward. Your phone will reboot when it's done.
Next, you'll have to temporarily boot a modified boot.img using Minimal adb and fastboot. Once this step is completed and the phone boots up you'll need to go to the Play Store and install Supersu as well as Busybox if you want your root apps to work properly.
Go here on your computer and download the modified boot.img named boot_200007.img and place it in the Minimal adb and fastboot folder. As you can see in this screenshot:
my adb and fastboot folder is located at C:\Windows\Minimal ADB and Fastboot. Once you have the boot.img copied to the right folder go ahead and connect your phone, if it isn't already. Hold the power button and restart the phone. As soon as the screen goes off hold the volume up button until the phone boots into fastboot mode. If you have trouble with this, you can just turn the phone off, and then press and hold power and volume up until it boots into fastboot mode. Right click the Minimal adb and fastboot icon and select run as administrator. As long as it's installed correctly, the following commands shouldn't give you any error messages. Before we go further, let me briefly explain what we're doing at this point. We have two options: we can flash the boot.img which will physically write it to the proper partition on your phone, or we can simply boot the phone while the modified boot.img remains on your computer and unwritten to the phone, which is what we want to do in this case. To do this we enter the following command:
fastboot boot boot_200007.img
Your phone should reboot on it's own and once it does open the app drawer and check to see if Supersu is installed. If it isn't, open Play and install it, as well as Busybox. Open Supersu and make sure you have root. Once your done, open Busybox and install Busybox to /system/xbin and reboot when finished. At this point, you can disconnect your phone and ensure the Supersu does give you any errors. Test it by installing your favorite root apps, and since you're new to root, I'll give you some suggestions. You can do a google search to find Adaway. It isn't available in the Play Store because it's an adblocker and ads are Google's bread and butter, but it sure is nice to use apps without intrusive apps trying to sell you something no matter where you go. Root + Adaway have been solving that problem for years. Next we have Root Explorer which is my root file manager of choice. Another community favorite is ES File Manager. Both are great. Titanium Backup, Flashify (install it for the next step), and Viper4Android (not in Play search XDA) are all must have apps for root users. Install and open some of those (especially Flashify) just to verify that they work and let's move on the next step.
Download TWRP here and place it on either internal or external storage. Open Flashify and select Recovery Image and then find and select recovery551_200431.img. This will write the TeamWinRecoveryProject custom recovery to the recovery partition of your phone which will allow you to view, backup, restore, and modify all the relevant partitions that make up the Android operation system. At this moment, it's important to understand that you are now more than capable of completely and totally bricking your phone...but you're also capable of recovering from most problems that can arise from flashing mods and using root apps. This is where we'll make a complete backup for just that very reason.
After you've flashed TWRP using Flashify, you'll be prompted to reboot. Do so, and your phone will reboot into recovery. You'll see a message one the first run with a check box to disable modifications to system or something along those lines (can't remember exactly what it says lol), just don't check it. Leave the box uncheck and swipe the bar to allow modifications to system. Now, you should see the main menu. Select Backup and make sure that Boot, System, Data, and Cache are selected and rename the backup to something along the lines of "stock_rooted" or "stock_backup" if you wish and you're ready to create a nandroid backup. Swipe the button and give it a few minutes. Once done, just reboot and you're good to go.
Now to install Xposed, you'll first need to install the Xposed Installer .apk on your phone from here. To flash Xposed, reboot into recovery (turn off then hold power + volume down) and select Install then select the Xposed .zip package xposed-v80-sdk21-arm64.zip that you downloaded and placed on your internal (preferrably) or external storage beforehand. Once finished just reboot and you're done. Be warned that the first boot after installing Xposed will take a long time (approx. 5-10 minutes). Greenify, Gravitybox (LL), Youtube Adaway, Flat Style Bar Indicators, MaxLock, and NotifyClean are just a few of my favorite Xposed modules. Be sure to read the descriptions for these modules carefully and do not forget that Xposed modules can be tricky and cause problems if they're not compatible with your phone. Honestly, you should ask here before installing any modules that I haven't already mentioned.
Anyway, that's my brief write-up lol. Hopefully, that isn't too hard to follow. Don't hesitate to reply back if you encounter a problem, have any questions, or simply want to report your success and ask for tips. I'll leave you with this little tip: don't give up on ZenUI. It definitely doesn't hold a flame to stock Android, but if you use a third party launcher like Nova Launcher and use Developer Options to increase animation speed to .5 seconds (or turn them off entirely) it's really not so horrible, in my opinion. It's damn sure not TouchWiz.
HampTheToker said:
So, here's my (hopefully) brief write-up to acquire root, install recovery, make a backup, and ,optionally, install the Xposed framework. Before getting started be sure to have plugged your phone into your computer for Windows to download and install drivers for your ZF2L. Also, you will need to download and install adb in order to use command prompt to flash files to your phone. This link will take you to a thread here at XDA for Minimal ADB and Fastboot. This is the easiest way to install and use adb and fastboot on your computer. Once you have it installed you can proceed to the next steps.
First, you'll need to unlock your bootloader using the app found here. It's in a .zip files for whatever reason, so you'll need to use 7zip or WinZip or WinRAR or something on your computer to extract it and install to your phone. You can plug your phone in and place the extracted app on your external or internal storage or use a cloud storage app like Dropbox or Google Drive to transfer it to your phone. If you plug it in and place on your internal or external storage, then you'll need to use File Manager (it's a stock app) to find and install it. Once installed just run the app. It's extremely user friendly and straightforward. Your phone will reboot when it's done.
Next, you'll have to temporarily boot a modified boot.img using Minimal adb and fastboot. Once this step is completed and the phone boots up you'll need to go to the Play Store and install Supersu as well as Busybox if you want your root apps to work properly.
Go here on your computer and download the modified boot.img named boot_200007.img and place it in the Minimal adb and fastboot folder. As you can see in this screenshot:
my adb and fastboot folder is located at C:\Windows\Minimal ADB and Fastboot. Once you have the boot.img copied to the right folder go ahead and connect your phone, if it isn't already. Hold the power button and restart the phone. As soon as the screen goes off hold the volume up button until the phone boots into fastboot mode. If you have trouble with this, you can just turn the phone off, and then press and hold power and volume up until it boots into fastboot mode. Right click the Minimal adb and fastboot icon and select run as administrator. As long as it's installed correctly, the following commands shouldn't give you any error messages. Before we go further, let me briefly explain what we're doing at this point. We have two options: we can flash the boot.img which will physically write it to the proper partition on your phone, or we can simply boot the phone while the modified boot.img remains on your computer and unwritten to the phone, which is what we want to do in this case. To do this we enter the following command:
fastboot boot boot_200007.img
Your phone should reboot on it's own and once it does open the app drawer and check to see if Supersu is installed. If it isn't, open Play and install it, as well as Busybox. Open Supersu and make sure you have root. Once your done, open Busybox and install Busybox to /system/xbin and reboot when finished. At this point, you can disconnect your phone and ensure the Supersu does give you any errors. Test it by installing your favorite root apps, and since you're new to root, I'll give you some suggestions. You can do a google search to find Adaway. It isn't available in the Play Store because it's an adblocker and ads are Google's bread and butter, but it sure is nice to use apps without intrusive apps trying to sell you something no matter where you go. Root + Adaway have been solving that problem for years. Next we have Root Explorer which is my root file manager of choice. Another community favorite is ES File Manager. Both are great. Titanium Backup, Flashify (install it for the next step), and Viper4Android (not in Play search XDA) are all must have apps for root users. Install and open some of those (especially Flashify) just to verify that they work and let's move on the next step.
Download TWRP here and place it on either internal or external storage. Open Flashify and select Recovery Image and then find and select recovery551_200431.img. This will write the TeamWinRecoveryProject custom recovery to the recovery partition of your phone which will allow you to view, backup, restore, and modify all the relevant partitions that make up the Android operation system. At this moment, it's important to understand that you are now more than capable of completely and totally bricking your phone...but you're also capable of recovering from most problems that can arise from flashing mods and using root apps. This is where we'll make a complete backup for just that very reason.
After you've flashed TWRP using Flashify, you'll be prompted to reboot. Do so, and your phone will reboot into recovery. You'll see a message one the first run with a check box to disable modifications to system or something along those lines (can't remember exactly what it says lol), just don't check it. Leave the box uncheck and swipe the bar to allow modifications to system. Now, you should see the main menu. Select Backup and make sure that Boot, System, Data, and Cache are selected and rename the backup to something along the lines of "stock_rooted" or "stock_backup" if you wish and you're ready to create a nandroid backup. Swipe the button and give it a few minutes. Once done, just reboot and you're good to go.
Now to install Xposed, you'll first need to install the Xposed Installer .apk on your phone from here. To flash Xposed, reboot into recovery (turn off then hold power + volume down) and select Install then select the Xposed .zip package xposed-v80-sdk21-arm64.zip that you downloaded and placed on your internal (preferrably) or external storage beforehand. Once finished just reboot and you're done. Be warned that the first boot after installing Xposed will take a long time (approx. 5-10 minutes). Greenify, Gravitybox (LL), Youtube Adaway, Flat Style Bar Indicators, MaxLock, and NotifyClean are just a few of my favorite Xposed modules. Be sure to read the descriptions for these modules carefully and do not forget that Xposed modules can be tricky and cause problems if they're not compatible with your phone. Honestly, you should ask here before installing any modules that I haven't already mentioned.
Anyway, that's my brief write-up lol. Hopefully, that isn't too hard to follow. Don't hesitate to reply back if you encounter a problem, have any questions, or simply want to report your success and ask for tips. I'll leave you with this little tip: don't give up on ZenUI. It definitely doesn't hold a flame to stock Android, but if you use a third party launcher like Nova Launcher and use Developer Options to increase animation speed to .5 seconds (or turn them off entirely) it's really not so horrible, in my opinion. It's damn sure not TouchWiz.
Click to expand...
Click to collapse
Thank you man, I will try this when I get a chance (working 14 hour days ATM) but I will let you know how it goes.also what model member do you have. Because the box I have is we're I got my model number. I can't find the one listed on my box in the device itself.
Exact same model...ZE551KL.
In About Phone the model number is ASUS_Z00TD.
HampTheToker said:
Exact same model...ZE551KL.
In About Phone the model number is ASUS_Z00TD.
Click to expand...
Click to collapse
Exactly what I have. Sweet. I'll update you once I'm done. Thank you for your help and assistance. Any app advice? For uninstalling and cleaning hdd/ram. And theme?
Come on, bro...I gotta know if that's friendly enough to get you squared away...
HampTheToker said:
Come on, bro...I gotta know if that's friendly enough to get you squared away...
Click to expand...
Click to collapse
I should have time either tomorrow or next weekend all depending and I'll let you know then. Depends on how much I have to work. I check this post about once to twice a day. Thank you for your effort and time. I really do appreciate it.
Now I do have one more question on my mind. Does the Asus zenfone that we have keep a flash tracker? Meaning that it keeps track if a phone was rooted. The reason I ask is that I have a 2 year warantee and I know that this will "void" it unless I flash it back. But if they have a tracker then I need to make sure there is a way to reset that as well. From what I have read personally it is only Samsung that is keeping track in this way. Thanks for your help Mr.Toker
Yeah, that's mostly a Sammy thing. I'm coming from a Galaxy S4 that's been passed down to my six year old. I'm all too familiar with flash counters and KNOX security. Thankfully, I don't believe Asus has anything like that. That's one of the many reasons I chose this phone over anything Cricket had to offer. I don't care how good the hardware is, if it can't be unlocked and rooted, then I don't want it.
But, to answer your question more directly, no, I don't believe your warranty will be affected.
Also, I'm going to paste this warning from the developer that built TWRP for us.
Warning
Do not try to fix permission, if you do not know exactly what this is ?
Home > Advance > Fixpermission
Click to expand...
Click to collapse
Just figured I'd add that I believe I read unlocking your boot loader voids the warranty. As of right now, I'm pretty sure there's no way to root without unlocking it, and no way to re-lock it after unlocking.
Sent from my ASUS_Z00TD using Tapatalk
CKtheProblem said:
Just figured I'd add that I believe I read unlocking your boot loader voids the warranty. As of right now, I'm pretty sure there's no way to root without unlocking it, and no way to re-lock it after unlocking.
Sent from my ASUS_Z00TD using Tapatalk
Click to expand...
Click to collapse
"oem relock bootloader" should do the trick, but I haven't tried it. Sure, technically unlocking your bootloader and rooting voids your warranty, but it's not like either sends a message to Asus in the background stating that you've voided your warranty. The only way they'd know is if you sent it to them for a claim while still rooted. Even then, if it's bricked, it's bricked. They still won't know. If it's not bricked and it's just hardware, then you should be able to unroot.
Honestly, rooting your device has always been a risk to your warranty, but I've yet to have any issues with it since I started rooting my devices in 2009.
HampTheToker said:
"oem relock bootloader" should do the trick, but I haven't tried it. Sure, technically unlocking your bootloader and rooting voids your warranty, but it's not like either sends a message to Asus in the background stating that you've voided your warranty. The only way they'd know is if you sent it to them for a claim while still rooted. Even then, if it's bricked, it's bricked. They still won't know. If it's not bricked and it's just hardware, then you should be able to unroot.
Honestly, rooting your device has always been a risk to your warranty, but I've yet to have any issues with it since I started rooting my devices in 2009.
Click to expand...
Click to collapse
Yeah you're probably right. Luckily, I've never had to send a phone I rooted back in for repairs so I can't say anything about the process.
Sent from my ASUS_Z00TD using Tapatalk
Thanks for those root/recovery instructions, just got this same phone and model number yesterday and just now found the files needed ! You rock! What roms do you suggest?
tmjm28 said:
Thanks for those root/recovery instructions, just got this same phone and model number yesterday and just now found the files needed ! You rock! What roms do you suggest?
Click to expand...
Click to collapse
at present we have only stock rom, no custom rom is available for zenfone laser.
Tested SM-T820, for Android O. It is reported that it works for Android P as well, with small modification (see below).
This post is designed to gather information found across this forum to give a step-by-step guide for obtaining a custom recovery TWRP and Root (via Magisk) for the Samsung S3 tablets running Android O. This process works if you are upgrading or staying with Oreo. [If you wish to run Android N, there is a slightly different process.] This process will wipe the contents of the tablet, so make backups as appropriate.
Credit to the software authors, original post creators (especially ashxy) and all those who contributed to the discussions to clarify all the issues. Most of the specifics below were hammered out in https://forum.xda-developers.com/ga...recovery-twrp-3-1-0-1-samsung-galaxy-t3581359.
WARNING Flashing a custom recovery to your device will trip the Knox warranty bit on your phone. Check with your mobile provider to see if they will still cover warranty on Knox bit triggered devices. If you understand this risk, continue on. You generally don't have to worry, as it's incredibly hard to brick a Samsung device, and physical damage warranties should be exempt from Knox triggering. [credit: jcadduono]
The below instructions are for Android O (Oreo). User BenG7 reports (I have not verified) that the same process, with slight modification, will work for Android P (Pie). See posts #38 and #39 for those modified instructions.
1. DOWNLOAD
a. ODINhttps://samsungodin.com/ (I used 3.13.1)b. Samsung USB Drivershttps://developer.samsung.com/galaxy/others/android-usb-driver-for-windowsc. Original firmwareSearch for SM-T820 and download latest version 8.X at http://updato.com/firmware-archive-select-modeld. TWRPAt some point, it will likely find an official version at https://twrp.me/Devices/. For now, grab the latest beta version at https://forum.xda-developers.com/ga...recovery-twrp-3-1-0-1-samsung-galaxy-t3581359e. MagiskGet the latest stable Magisk version from https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445f. Ashxy's oreo encryption disabler https://androidfilehost.com/?fid=890278863836288163
2. PREPERATION
a. While running your tablet in Android, go to Settings -> About device. Tap 7 times on Build number to enable Developer options. [credit: jcadduono]b. Now go to Settings -> Developer options. You need to enable OEM unlock, otherwise you might end up with boot problems or be unable to flash later on. Do not ever turn off Developer Options or OEM unlock. Doing so will cause your device to refuse to boot and require a full factory restore. [credit: jcadduono]c. Turn off your tablet.d. Get a micro SD carde. Copy Magisk and oreo encryption disabler onto microSD cardf. Install microSD card into Tabletg. Install Samsung USB Drivers on Windows machineh. Unzip ODIN (1a) and Original firmware (1c) on your Windows computeri. While tablet is off, plug in usb cable between tablet and Windows computer3. REFLASH ORIGINAL FIRMWARE (Optional if your tablet is already running Oreo)
a. Enter Download mode, press and hold Home, Down Vol, and Power until you see the Warning screen of the downloader mode. Press Vol up to continueb. Open up ODIN, confirm that ODIN can see your tablet. We will fill in three files for flashing. Click AP button on Odin. In popup, select AP_[blah blah].tar.md5 (whatever AP file you downloaded in step 1c). After selecting the file, Odin will check the signature of the file you downloaded and appear to freeze up. Let it finish, and it will report: <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. In a similar way, fill in the BL and the CSC files. As these are much smaller, the signature checks will go much faster. [Use the CSC file, not the HOME_CSC file, in the CSC slot. This will completely erase your data on the tablet, which minimizes the likelihood of future problems. You will be erasing all of the /data partition later, so there is no point in saving your data now by using the HOME_CSC file.]c. Make sure that in the options, Auto Reboot is selected. Then click Start. The screen of the tablet should show a progress bar as your tablet is being restored to its original firmware.d. At this point, your tablet will reboot into the default recovery mode, with a full blue screen and an android figure with the spinning arrows. The tablet will then self reboot again (perhaps more than once). After a while, you will be greeted with the Welcome screen where you can select your language. Be patient.e. Power off the tablet using the power button4. FLASH TWRP
a. Enter Download mode (press and hold Home, Down Vol, and Power) until you see the Warning screen of the downloader mode. Press Vol up to continueb. (Re) Open up ODIN, confirm that ODIN can see your tablet,c. Important We do not want the tablet to automatically reboot after installing TWRP. If the tablet does reboot into Android before completing the steps in Section 4 and 5, there is a good chance the stock recovery will overwrite TWRP. So click the Options tab on the left and deselect Auto Reboot. After doing that, click the Log tab so you can monitor progressd. Click AP button on Odin. In popup, select twrp-[blah blah].img.tar (downloaded in step 1d), but make sure that the BL and CSC slots are unchecked, i.e. we will only be flashing an AP file this time. Then click Start. You will see the progress bar on your tablet. Watch the log window of Odin and wait for the message "<OSM> All threads completed. (succeed 1 / failed 0)"5. ENTER TWRP AND CONFIGURE
a. At this point, from the last section, you should still be in Download mode on the tablet. It is important that, after flashing TWRP, to go straight to TWRP without letting the Android System reboot. To do this, Hold [Volume Down] + [Home] + [Power] to get out of Download mode and immediately swap to [Volume Up] (while still holding [Home] + [Power]) when the screen blanks. [credit: jcadduono]b. In a few secs, you will see the TWRP first screen, you can let go of all the buttons.c. If you don't see then TWRP boot splash try again from the start of 4. FLASH TWRP.d. Swipe to Allow Modifications. (For some reason, TWRP has some issues with the touchscreen for some tablets. If you experience this, expect to make several swipes or taps until it properly registers. You have succeeded when you see the classic 8-button main screen of TWRP.)e. Click Wipe then Format Data (do not just Wipe data), type yes and let it complete. Then click back until you get to the 8-button main screen of TWRP.f. Click the Mount button. Select Storage button, and confirm that the Internal Storage shows non-zero MB. If it is, you know that the /data partition is now mounted properly. However, since we put the needed install files on the microSD, go ahead and select Micro SD Card as our storage. Click Back until you are back at the 8-button main screen.g. Click the Install button, install the Magisk zip file you downloaded in step 1e and copied to your microSD. Once finished, click Back to get back to the install screen (do not reboot yet).h. Install the oreo encryption disabler zip file from step 1f. When it completes, you can press the Reboot System button and let your tablet reboot into Android. You can also disconnect the usb cable connecting the tablet from the computer. The tablet may reboot itself once or twice, let it do its thing, and eventually you will see the Samsung Welcome! Screen, where you can select your language.6. CONFIRM DATA ACCESS IN TWRP
a. Before going into configuring your tablet, go ahead and turn off the tablet and re-enter TWRP (Home, Vol up, Power).b. *Important* Since you will not be changing your system partition, this time, when you get to the "Keep System Read only?" screen, click the Keep Read Only button.c. In the 8-button screen of TWRP, click Mount, click Select Storage. Confirm that the Internal Storage is greater than zero MB. If it is, congratulations, you have TWRP installed with /data mounted.d. Reboot to System7. FUTURE USE OF TWRP
a. Unless you are planning to make changes to the System, continue to choose the Read Only System when you return to TWRP.B. [NOT YET TESTED]If you need to make changes to System, e.g. flash a new ROM, go back to Step 5 and install the ROM just before Step 5g
8. Click the Thanks button if my guide helped you.
Good guide. In 5, a, at least for the t-820 and if assume other variants, you can hold power, vol up, and home until it boots to recovery. You don't need to hold the keys to boot the bootloader and then quickly switch to the vol up. It's a little easier for me to do it that way.
Sent from my [device_name] using XDA-Developers Legacy app
Good guide and HNY!
klaberte said:
7. FUTURE USE OF TWRP
.....
B. [NOT YET TESTED]If you need to make changes to System, e.g. flash a new ROM, go back to Step 5 and install the ROM just before Step 5h
Click to expand...
Click to collapse
I would flash magisk *after* flashing a new ROM, i.e. install the ROM just before Step 5g.
Btw, I installed TWEAKED for T820 by @rorymc928 which comes already with encryption disabler.
Great guide!
But, anyway to install SuperSU instead of Magisk?
Frunktz said:
Great guide!
But, anyway to install SuperSU instead of Magisk?
Click to expand...
Click to collapse
I'd ask over here: https://forum.xda-developers.com/ga...recovery-twrp-3-1-0-1-samsung-galaxy-t3581359
klaberte said:
I'd ask over here: https://forum.xda-developers.com/ga...recovery-twrp-3-1-0-1-samsung-galaxy-t3581359
Click to expand...
Click to collapse
Already asked but it SEEMS not possible because SuperSu was discountinued. But somebody has successfully installed it on Oreo 8.
I am new to rooting my Tab s3 so pardon me if any of my questions are redundant. I will be following the directions from post "Newbie-friendly: TWRP and Root for Samsung S3 Tablet". Can someone please confirm the following for me before I root -
1. I am running on the most recent firmware T820XXU2BRL1, do I need to complete process #3 REFLASH ORIGINAL FIRMWARE?
2. After I complete root process will my Tab s3 automatically be set to recognize SD Card as internal storage or will I need to complete another setting or process? This is my main reason to rooting.
3. Second reason is to remove bloatware. Does anyone know of a post advising which bloatware on Tab s3 to remove safely and which ones to leave alone?
4. After completing root process following directions from post "Newbie-friendly: TWRP and Root for Samsung S3 Tablet" has anyone experienced any Tab s3 functions or app not working properly? Is USB-OTG working?
my Tab S3 delivered today and followed ur guide and did in first try! send Thanks!
Great post. Im having an issue. With my tab s3. Yesterday i was updating magisk manager and after i did it stopped charging. I thought my charger came unplugged but it didnt. Now the only way i can charge it is to put it in twrp and let it charge. But its unresponsive when its powered on and when its off it just loops the charging screen. But wont charge. I jave tried to revert back to a previous back up but had no luck. I was plannig on flashing stock firmware when i get back to my computer.. but any input would be greatly appreciated..
Sent from my SM-N960U using Tapatalk
cdeitrich00 said:
Great post. Im having an issue. With my tab s3. Yesterday i was updating magisk manager and after i did it stopped charging. I thought my charger came unplugged but it didnt. Now the only way i can charge it is to put it in twrp and let it charge. But its unresponsive when its powered on and when its off it just loops the charging screen. But wont charge. I jave tried to revert back to a previous back up but had no luck. I was plannig on flashing stock firmware when i get back to my computer.. but any input would be greatly appreciated..
Sent from my SM-N960U using Tapatalk
Click to expand...
Click to collapse
I don't know why your tab won't charge. Updating magisk should be totally unrelated to charging. Did you have any magisk modules that would have modified charging parameters?
jd1639 said:
I don't know why your tab won't charge. Updating magisk should be totally unrelated to charging. Did you have any magisk modules that would have modified charging parameters?
Click to expand...
Click to collapse
I had the sony framework module installed for ps4 remote play. But that was it. I cant figure it out.
Sent from my SM-N960U using Tapatalk
jd1639 said:
I don't know why your tab won't charge. Updating magisk should be totally unrelated to charging. Did you have any magisk modules that would have modified charging parameters?
Click to expand...
Click to collapse
https://r.tapatalk.com/shareLink?ur...share_tid=3641443&share_fid=3793&share_type=t
This was my issue. I love this forum.
Sent from my SM-N960U using Tapatalk
Quick question. I'm already on the latest firmware, my bootloader is unlocked so can I just run Odin, flash twrp and then any pre-rooted Rom? Or do I need to follow all these steps? It's been awhile since I've flashed anything and just want to make its done properly. TIA
after rooting, the secure folder works or not
jawalexander said:
after rooting, the secure folder works or not
Click to expand...
Click to collapse
That's correct.
Is that the only drawback?
On reboot I got: Verification Failed, Unable to restart your device. The Integrity verification has failed. You need to reset your device to factory default settings. This will erase all your data.
Now what?
UPDATE: Oh I see, I totally skipped e. "Click Wipe then Format Data". Now it's fixed and working properly. Now to remove some bloatware.
David C.
I posted something silly before. Deleted.
THANKS ! Works also for Android PIE
Hi,
thanks,
I did a clean install of Android Pie for my Samsung Galaxy Tab S3, SM-T825.
Altough not yet officially available for my country, I downloaded the version for the Netherlands (PHN-T825XXU3CSH9-20190909091851) from the SamFrew-site [https://samfrew.com/nl/download/Galaxy__Tab__S3__/evss/PHN/T825XXU3CSH9/T825PHN3CSH8/[/URL] . As one can anyway customize languages, etc., no problem.
Then I followed your guide step by step.
I added BusyBox, latest version from XDA developers []https://forum.xda-developers.com/showthread.php?t=1929852 as last step, in 5. g
Altough written for OREO, all this steps work perfectly well on my Android PIE !
Including the use of the Ashxy's oreo encryption disabler of point 1.f
(I didn't find a similar disabler for Android Pie yet... Someone a better idea ?)
Rootchecker confirms that I have Root access and that BusyBox is indeed installed.
Thanks very much - great help !
baudi
baudi said:
Hi,
thanks,
I did a clean install of Android Pie for my Samsung Galaxy Tab S3, SM-T825.
Altough not yet officially available for my country, I downloaded the version for the Netherlands (PHN-T825XXU3CSH9-20190909091851) from the SamFrew-site [https://samfrew.com/nl/download/Galaxy__Tab__S3__/evss/PHN/T825XXU3CSH9/T825PHN3CSH8/[/URL] . As one can anyway customize languages, etc., no problem.
Then I followed your guide step by step.
I added BusyBox, latest version from XDA developers []https://forum.xda-developers.com/showthread.php?t=1929852 as last step, in 5. g
Altough written for OREO, all this steps work perfectly well on my Android PIE !
Including the use of the Ashxy's oreo encryption disabler of point 1.f
(I didn't find a similar disabler for Android Pie yet... Someone a better idea ?)
Rootchecker confirms that I have Root access and that BusyBox is indeed installed.
Thanks very much - great help !
baudi
Click to expand...
Click to collapse
Thanks for the update! Just wondering, why did you add busybox and XDA developers at the end of step 5g? XDA developers could have been installed as a standard app once the tablet is up and running, no?
Why manually installing BusyBox at this point of the setup?