Hello good people,
I've got a problem with my Wizard that's been bugging me for a while now and no matter what i try, i can't get it fixed........
Recently i flashed my Wizard to WizFlo2d 6.1.1.2, everything good and all, but the rom is too buggy for me and i want too flash something else.
Only problem is, since flashing that rom, i can't flash anything else, because Active Sync doesn't work at all. It will connect, but when syncing i get lots of errors. The pda also reports errors, but i can't even read those because of it's buggyness. There is a hotfix for this problem but that won't install ¬¬ This all also means i can't flash, not in Vista, not in XP, not in bootloader, nowhere. I keep getting the Phone not ready or Phone not connected error over and over again....
I really hope you can help me with this because my pda is as good as bricked right now, the rom is very buggy and doesn't work and i can't get another rom on it....
USB port trouble
The problem is with the USB port you are connecting to, I had the same problem with WM6.1 ROM's while it was fine in WM5. Make sure your phone is connected to a USB port in the back of the computer not the front. If it still doesn't work, try unplugging any unneeded USB items and see if that frees up enough power for it to work right. You could also try using a different PC. My wife's laptop worked fine even when no port on my desktop would work. My final solution was to get a powered USB hub and plug into that and now I connect and can flash every single time with no problem.
rmcknight said:
The problem is with the USB port you are connecting to, I had the same problem with WM6.1 ROM's while it was fine in WM5. Make sure your phone is connected to a USB port in the back of the computer not the front. If it still doesn't work, try unplugging any unneeded USB items and see if that frees up enough power for it to work right. You could also try using a different PC. My wife's laptop worked fine even when no port on my desktop would work. My final solution was to get a powered USB hub and plug into that and now I connect and can flash every single time with no problem.
Click to expand...
Click to collapse
Hmm, weird thing is, i'v flashed lots of WM6.x rom's before without any trouble, and i already tried the back usb port. Haven't tried freeing up all the usb ports yet. I will try another pc though, see if that works. Thanks, going to try this now
This keeps getting crazier, i can connect my phone, browse files, download and upload files, but still can't flash...Even with powered usb hubs and other pc's :S:S There's still a tooltip about syncing i can't read....Can anyone help?
i have the same problem.. as works fine but i cannot flash due to a 260-error. Have used all usb-ports and rebootet everything including my fridge but im stuck with this manilla-without-wifi rom
Hi, background is this..
I have a D802-10C G2 that i rooted the stock 4.2.2 rom a while back using the post chinese method. Easy enough, all worked fine. no complaints. A couple of weeks ago i got offered the OTA 4.4 update, this failed due to the root. I then removed the root using the feature in super su. that seems to have worked as no apps or file managers etc could get root access. However, the OTA still wont work.
Now my problem is my phone will no longer be recognized by any operating system, on multiple computers. I have tried many ADB drivers, Windows 7 wont even detect the device, i've used every PC connect mode, USB debugging. However always the same result, it's as if i'm plugging in a blank usb cable into the computer. Nothing at all.
The only thing that does happen when i connect the phone to a computer is the phone starts to trickle charge. There is nothing detected in Device Manager in Windows 7 I've tried connecting in download mode, nothing. I've tried the LG support tool, PC sync. Nothing.
WiFi does connect to the PC suite fine BTW and other than that the phone is working perfectly. I've also tried connecting multiple usb cables on multiple ports.
I haven't been able to find a single case of the same problem in the week or so i've been looking. Hoping someone can help, i'm thinking i may have soft bricked my phone. I really do not think this is a driver issue.
Any help would be great. cheers
Paul
+1
i have the same problem plz help
cambies said:
Hi, background is this..
I have a D802-10C G2 that i rooted the stock 4.2.2 rom a while back using the post chinese method. Easy enough, all worked fine. no complaints. A couple of weeks ago i got offered the OTA 4.4 update, this failed due to the root. I then removed the root using the feature in super su. that seems to have worked as no apps or file managers etc could get root access. However, the OTA still wont work.
Now my problem is my phone will no longer be recognized by any operating system, on multiple computers. I have tried many ADB drivers, Windows 7 wont even detect the device, i've used every PC connect mode, USB debugging. However always the same result, it's as if i'm plugging in a blank usb cable into the computer. Nothing at all.
The only thing that does happen when i connect the phone to a computer is the phone starts to trickle charge. There is nothing detected in Device Manager in Windows 7 I've tried connecting in download mode, nothing. I've tried the LG support tool, PC sync. Nothing.
WiFi does connect to the PC suite fine BTW and other than that the phone is working perfectly. I've also tried connecting multiple usb cables on multiple ports.
I haven't been able to find a single case of the same problem in the week or so i've been looking. Hoping someone can help, i'm thinking i may have soft bricked my phone. I really do not think this is a driver issue.
Any help would be great. cheers
Paul
Click to expand...
Click to collapse
YOu can try checking the device manager or use other USB port on your phone.
buenarc said:
YOu can try checking the device manager or use other USB port on your phone.
Click to expand...
Click to collapse
The problem is not like the usual ones you will see about "computer not being able to see device" I don't think it's a driver or software issue, or if it is it's unlike any i have found in the weeks i've been searching the net for a solution. Here's why....
When i connect the phone to Windows 7 and 8 ( on 3 different computers) No hardware is detected, nothing in the Device Manager, no yellow question marks indicating 'Unknown Hardware'. Nothing, all it does is start trickle charging.
Now even with no ADB, or any driver at all installed, the computer should still detect the phone. Mine does not.
The same thing happens using OSX and Linux Mint 16 (again multiple computers) No devices or mounted or volumes shown at all. Linux terminal command "$ lsusb" does not list my hardware.
This is why i'm pretty much convinced that there is something wrong with the USB port on the phone. Because, if Linux can't see it then surely it's a hardware problem right?
The only other thing i can think of is, i have messed up the phones firmware while trying to unroot it? but only because the timing of all this is just too uncanny.
I think i'll have to suck it up and admit defeat here. Funny thing is the phone works perfectly and charges fine.
Stuck on 4.2 , with no ADB functionality. Perhaps i'll sell it cheap to someone who doesn't care.
Cheers for the reply mate.
Same problem here!
Only my G2 is not rooted, it is still on factory OS and recently updated to 4.4.2.
I have tried on several computers, different ports and no help.
On the first connection to a PC not connected before windows reports "USB device not recognized" problem.
After that every time I connect the phone to the same computer the phone itself only recognizes that it is using USB charging mode, it does not recognize the computer connection (known by the USB ison on android system tray) even with "Ask upon connection option checked".
Even when I manualy change the Android mode in Settings --> PC Connection from MTP to PTP or even LG software, nothing happens.
Definetly there seems to be a problem with the phone, but I don't beleive it's a software but a firmware problem.
Please help if anyone knows what to do.
same thing happened after installing T-mobile rom thrugh twrp. but my device boots into fastboot and i tryed falshing :
laf.img, boot.img, aboot.img, recovery.img, laf.img
but after reboot my LS980 dissapear from device manager and stucked on LG logo.
Dont know what to do now.
I'm no expert, but given there are a lot of them here and none have weighed in on this with any ideas for a fix, i'm going to assume it's a hardware problem.
Anyone else agree? Hardware problem not software?
Cheers
I guess that you already wiped everything right? Apart from that, i'll suggest you to go to some tech supp and ask them if they can verify that each pin of the micro usb is properly working.
Sorry for my english, hope it helps!
Sent from my LG-D802 using XDA Free mobile app
I will try to check the connector although i dont think that it is a hardware issue.
BTW I can enter the download mode after flashing the mentioned partitions and i can also enter the stock LG recovery but when i do the factory reset it keeps showing Factory reset processing ... for ever
It has happened to me the same thing :crying:, and is a problem with the boot.img, if by chance your G2 version 4.4.2 and the the 4.2.2 boot.img, goodbye.
The only solution is to take it to repair a service official, there will change you the card, with the consequent change of IMEI.quent change of IMEI.
Homero2 said:
It has happened to me the same thing :crying:, and is a problem with the boot.img, if by chance your G2 version 4.4.2 and the the 4.2.2 boot.img, goodbye.
The only solution is to take it to repair a service official, there will change you the card, with the consequent change of IMEI.quent change of IMEI.
Click to expand...
Click to collapse
where are you going to repair your G2?
and how much have you paid the repair?
THANKS
Any fix for this guys i have same problem!
Here I'm getting the yellow !, any suggestion?
Sirs, I flashed the baseband (https://www.androidfilehost.com/?w=files&flid=12880) then it got working back.
solved for me
I have some kinds of that problem, let try:
Settings -> General -> PC Connection -> Select USB connection method -> Media device (MTP) (or whatever)
Got this same issue after flashing cloudy g3 rom. Then later flashing dirty unicorns, which requires jelly bean baseband. But even restoring g3 and 24a baseband, still doesn't work. No pc tethering and no on the go usb. My usb port is basically charge only.
---------- Post added at 03:58 PM ---------- Previous post was at 03:56 PM ----------
Everything else works fine...I actually never even noticed this bc I never tether to pc. But now I have to bc I want flask kdz
Help me please
someone have a solution to this problem?
My Lg G2 D803 still on boot loop (LG logo) and thats all ... no usb connection , reset factory doesnt work ...
HELP PLEASE ...
Thank you
Anyone has an idea how to fix this problem?
same problem
I have a LG G2 . recently updated from vs98027a to vs98039a 5.0 lollipop. Since the update my computer won't recognize my device in download mode and I don't have superuser ppermissions. Help plz
I also have the same problem.
It happened when I tried to backup info through LG PC Suite: the phone disconnected during the process, and now it's not recognized by any PC (http://forum.xda-developers.com/lg-g2/help/lg-g2-recognized-windows-backup-t3155323).
Also found a description of the same problem here: https://www.reddit.com/r/lgg2/comments/2urpnw/lg_g2_usb_only_charging_not_recognized_by_pc/ - no solutions, too.
Did anyone manage to fix this?
So I had my phone rooted on ME7 but I was having issues so I attempted to update to 4.3 using Odin. The update failed and now my phone will no longer turn on. My PC still makes the noise for a device connecting when I plug it in so I am hoping there is still a chance I can fix my phone. If I hold the power button my PC will make the device disconnecting noise as well and it again makes the device connecting noise when holding the power button after that. Any thoughts?
try flashing another firmware and make sure you are flashing a correct firmware...i mean 9500/9505
You don't provide much information. What is the excact error you are getting?
Try different usb ports
Different pc
Different cable
Reinstall drivers
Make sure kies is not running in the backgroudn.
Okay. Hi guys.
I'm having some horrible USB connection problems and I've no idea whether they are hardware/software. I'm leaning towards the former.
About a month ago I noticed while plugged into my charger, my phone wasn't charging. Wiggling the cable did little, if anything to help. But it only happened that one day, and after a few beeps and boops of connections coming and going, it had seemed to have fixed itself.
Yesterday I decided to upgrade from XtreStoLite KitKat to XtreStoLite Lollipop. I made a bit of a mess of it and accidentally wiped my entire OS/cache/data before even putting the ROM on the sdcard directory. Fortunately I had already upgraded the modem/bootloader and was able to sideload the ROM.
I say I was able to sideload the ROM successfully, but this is really where the issues started to resurface. The first dozen or so times I tried to sideload I got "ADB not recognized" errors in CMD. I tried all sorts of USB driver re-installations, and installing google USB drivers from the Android SDK etc and nothing was working. Lots of beeps and boops of drivers installing and USB connections being made. In a last ditch attempt, I went back to CMD and once again typed "sideload adb rom.exe" and by some random miracle it worked. But that was the LAST time. I tried again later and got the same error as previously.
Anyway... new ROM installed. I ran through the set-up process and plugged my phone in to transfer over the add-on pack so I could re-activate Samsung Kies connections in order to restore my apps/photos etc.
*B-beep-b-b-b-eep-boop-b-beep* The phone was wildly connecting and disconnecting. I unplug it, blow into the USB connector - try to see any bent pins, but can't see anything. After a few tries I get it to connect long enough for me to transfer the file. Kies reinstalled. Throughout this WHOLE process there has been FAR too many disconnects.
If I DO get my phone to connect - Kies is stuck eternally on "connecting". I have a feeling MTP mode is just broken - as NOTHING shows up in My Computer when in that mode. Odin 3.09 no longer sees my phone at all, and when I connect in Camera mode NONE of the .zip files I placed in the sdcard directory show in Windows at all. But they ARE there, as I can still install from .zip in recovery.
The phone seems to work fine. But I want to restore my Kies backup, add/remove the .zips in the main sdcard directory, and see my phone in Odin.
Please help me. I am scared.
Hey!
New to XDA but a complete fan of the help and guides you guys provide.
So, I acquired an i9060 smartphone and successfully installed CM 11 without the help of my laptop since the usb cable through Odin never worked for me (driver issues on Win10?).
Unfortunately, my phone entered an Android boot loop. And now with a lot of attempt I can't even enter CWM or even charge my smart phone, as it always reboots while trying to charge the battery (it's always drained) or gets stuck during logo before accessing CWM.
I tried to install Samsung drivers, Kies, ABD, Odin to restore the firmware but... nothing seems to recognise this Samsung device. Does anyone had the same problems I'm having now? Any suggestions?
You might try another USB cable, USB port, or even another computer. Without Odin, you're not going to be able to fix this since recovery is no longer available.
es0tericcha0s said:
You might try another USB cable, USB port, or even another computer. Without Odin, you're not going to be able to fix this since recovery is no longer available.
Click to expand...
Click to collapse
Tried on 3 laptops but the problem persists. Never thought of changing my usb cable though. I'll give it a shot
Btw, is there anyway to use an external SD card to force a factory reset?
n1ur0 said:
Hey!
New to XDA but a complete fan of the help and guides you guys provide.
So, I acquired an i9060 smartphone and successfully installed CM 11 without the help of my laptop since the usb cable through Odin never worked for me (driver issues on Win10?).
Unfortunately, my phone entered an Android boot loop. And now with a lot of attempt I can't even enter CWM or even charge my smart phone, as it always reboots while trying to charge the battery (it's always drained) or gets stuck during logo before accessing CWM.
I tried to install Samsung drivers, Kies, ABD, Odin to restore the firmware but... nothing seems to recognise this Samsung device. Does anyone had the same problems I'm having now? Any suggestions?
Click to expand...
Click to collapse
Have you considered the possibility that your power button is sticking? Not the part that you touch but the hardware switch behind it?
Do you have USB debugging enabled?
Are you using the stock cable or at least a USB cable with the same number of pins/pinouts?