why do not install mm.rom because any prob refuses all options sm already probov a clean kernel but refuses to boot rom I always stall and everything is ok when you tune in to the start screen is displayed samsung galaxy note3 n9005 and this is the only the ideal kernel me starts on the next screen where the blue light comes on and the Samsung logo that flashes whole 5 hours and nothing happens I have tried other kernel Venda anything that I do like to have mm.rom asking for help
Witch rom do you have, and what kernel you use? That you have freeze in Samsung logo?
Related
Ok so today was my first time trying to root and put a rom on my phone, rooting worked out great. but I tried using flashify to load a rom (slimbean) on my i337 S4 now whenever it boots it sometimes shows a grey bar with 2 shades of grey and/or the samsun galaxy s4 logo with "kernel is not seandroid enforcing" on the top left and then the screen cuts straight to black and it appears that my phone is turned off. Happens every time, how can i fix this?
That's because you probably can't flash that rom.
You need to look up information about safestrap in the section for you phone, the i337.
If you want to get your phone working again, just flash a stock rom.
Hi guys i need help recovering my s4 gt-i9500 i'm a newbe and i think i might have bit off more than i can chew.a few nights ago i download FlymeOS v6.7.1 just to see how it works i did the whole procedure of doing nandroid backups of my current rom which was marshmallow aicp v11 after that i flashed the flymeOS..when i was done exploring it i didnt like that much cause of its limited customization levels so i figured i'd just flash back my nandroid and get on with my life but it didnt go as planned i left the phone restoring and slept next thing i saw in the morning was black screen with an empty battery,i've tired everything flashing twrp from odin,stock rom but i still get stuck on initialization in odin and my phone wont boot into recovery mod it's just stuck on samsung logo at times it passes and led light glows but thats just it with a blank screen i need help it's the only phone i have and i love it:crying::crying:
Tried using different USB cables and USB ports to flash a stock ROM from Sammobile.com?
you need to flash repair firmware with pit file
I flashed the stock 5.0.1 on my I9505 using Odin and the phone had an OTA update. After that I put it on my S6 edges charger and it charged to 100% then i tried to boot it and Samsung Galaxy S4 GT-I9505 boot splash flashed for 1 second, I tried a couple of times again same thing, then the phone turned on and said something like Update Installed. After that the phone wont boot at all , first the boot splash every time flashes for a second, then it stopped everything except a vibrate from time to time. Cant charge , cant boot up, cant do anything now the boot splash shows for a couple of seconds but with vertical white lines where the text is and it turns off again
Try flashing a stock ROM via Odin.
Hello,
So i was using my phone in a very normal usage, i dont recall installing any third party app or anything on that night. I last used my phone at arround 3am on Tuesday, woken up at about 5am and found it completely black with the blue led lighting up. It didnt respond to any kind of buttons combinations, it stayed like that until the battery was dead. For now I tried EVERYTHING, from flashing custom roms to downgrading or upgrading stock roms from sammobile. While flashing a rom, the phone reboots then gets stuck in erasing screen, forcing a reboot will make it return to its previous status only..
I have to signal here that i have frp lock OFF , and i guess that it is the main issue here is that the automatic update to oreo failed, i tried the solutions given on this tread : https://www.google.com/url?hl=fr&q=...870000&usg=AFQjCNEcdRjZySPCbnAulqAEIQDrHLWGRQ, but my phone wont reconnect after flashing the boot file, just gets stuck on the s7 edge screen again.
I have the exynos variant of the model and I live in Morocco !
UPDATE :
When i get to flash with a stock rom using odin , without the auto reboot option, i get the green pass and when I restart the phone manually it reboots normally and gets stuck on the samsung logo then reboots again to a black screen and the blue led again just like it was before the flash .... please help
Hi
I am stuck with Pulsing blue LED and the "Powered by Android" screen,
have access to both the recovery and the download Mode,
I also have Odin (version 3.13) on my computer along with TWRP (3.1.1 trlte and 3.2.1 version)
My device is a Samsung Galaxy Note 4 N910F bought in shop, no special carrier. It was bought in the Netherlands.
I have tried everything that I have read. The furthest that I can go is the Second Samsung Logo with the Flashing Light
Whenever I try to Flash the stock Firmware for my N910F, everything goes well in Odin but then when the phone reboots, it (sometimes) install the system update until 30% then shows erasing then either crashes right there and then or load the system update bar, completes it then shuts down.
I have tried multiple firmwares, even recovery firmwares. All the same problem. I can see the firmware is flashed, because when I enter recovery mode after I flashed a different ROM, it shows the version I flashed.
I cannot seem to install TWRP because it was never rooted.
Whatever I do, at some point, my phone either gets stuck in a bootloop, freezes with the LED light or shuts down.
And I have also proceeded to use different batteries.
Do you have any options?
Thank you
Heat????
I'm far from an expert here, but I've just experienced a similar problem where my N910F started boot looping / freezing within 15s to 2 min after unlocking. Unfortunately my micro Sd (SanDisk 256GB) was corrupted a week ago, so before doing anything else I did some research (XDA/YouTube) and probably found pretty much what you've found. I frequently change batteries so I could discount that as an issue. Someone suggested using the Samsung Smart switch here https://www.samsung.com/uk/getting-started/smart-switch/, but I haven't used it (yet) so I can't tell. I presume you had the latest firmware from Sams https://www.sammobile.com/firmwares/galaxy-note4/SM-N910F/.
My issue was that I needed to recover data, docs, photos, phone numbers etc. When boot looping the note 4 got very hot . In particular around and to the left of the camera (looking at the rear). Thinking it could possibly be the dreaded eMMC problem which also manifests itself by creating heat, I thought cooling the device might help. I placed the Note on a cooler box freezing block and voilà! No boot loop. I was able to remove all, but necessary apps and do a full copy to my PC. Storage was reduced from around 90% to 50% and memory 80% to 60%. It's now been stable for 12 hours, but the jury is still out. Next will be full reset with he latest available firmware 6.0.1 as mine was still on 5.1.1.
Good luck and hope this may be of some help.
I've got this problem, too, when using the unofficial Lineage 15.1 rom. SIM death and boot loop. After flashing the latest stock rom through odin, it passed but the screen was black and no system was installed. The blue notification light was constantly stuttering, though. And I couldn't even go to recovery!
When flashing, a 910F can get hot - use a cool temperature room and/or a fan blowing onto the device.
If it's not too late...