Database Users

broken screen ?!?

hi guys, I have a problem, my screen keeps doing this thing where it stops working, it looks like the device has crashed, but all the buttons work fine. the touch sensors for the screen works about 30% of the time. I've just figured tho that if I twiddle the screen a little it works again. but does it again soon after.
does this sound like it needs to go back to shop for repairs? does it sound broken?
please give your replies.

I have a similar problem with the screen:
- Sometimes (once or twice a day) the Universal does not accept touch screen input.
- Then I twist the screen back and forth.
- After this touch screen works again.
How can avoid this?
BTW, is there a method to physically fix the screen in landscape?
I only use the Universal with the screen oriented in "Laptop" Mode.

infinity loop of screen alignment

Hi everyone! im new to the forum So Ello everyone))) I,v had my wizard fr a month now and it was fine untill screen alignment become bad so i press on button and button next to it opened. Because of this i have clicked on Screen Align to align the screen but it started to loop (( dont know why because touch screen it self works perfectly. So what i supposed to do to align my screen? im using my phone by keyboard now because i just cant press any button on screen because it needs alignment. THX to anyone who has read this.

The wizard doesn't like being kept in a pants pocket. If you press with your finger firmly, running it all around the edge of the screen, that might cure the temporary insanity. Otherwise, set it aside (not in your pocket) for several minutes and try again. I got a leather belt case for mine to cure this issue.
If I'm guessing right, the first problem was that the touchscreen seemed to be very weird, so you tried to re-align it, and it always fails.

noup the problem was that i have bought the phone about 3 weeks ago it was working but when i tried screen alignment it just started to loop. I pressed it about 50 times(them 5 crosses) i dont know what to do (( because screen alignment now is crap (to exit screen alignment i need to get off battery and put it back)

[Q] Touch Screen problem

Hello, I had changed the glass touch screen my B92m because it was broken.
Everything went well except that I met a big problem with touch screen: it does not react as I did not disconnect the connector from coonector and immediately reconnects. (operation that takes half a second)
Having done this, it works well!
But as soon as the screen is put to sleep or I extinguishes the phone over reaction of the touch screen ...
POWER and HOME buttons still work, but the touch screen does not react.
Is there a driver or additional driver to install the ROM?
I do not understand where the problem is.
Could you help me?
Thank you in advance,
Terry

touch screen
Hi there. How did you resole your problem? Im also gising though that problem

Screen becomes unresponsive to touch frequently

I've searched a good bit and wasn't able to find any information regarding the exact problem I'm having.
Bought a used G6 for starters
No water damage indicated by the sticker
The phone works great on the home screen and app drawer
I turned on dev mode to show touches
When you're in the camera it will stop responding to touches, you can still take pictures using the side buttons. The screen will become responsive again after a couple minutes. This whole time you can take pictures and the screen is functioning just not responding to touch
This happens also when you're loading web pages, even a Google search the screen will stop responding to touch and then eventually start responding again for a short while till you load another page or start moving around the page too quickly it seems. However again the screen is functioning, video previews are playing, just no response to touch.
Loading a game like Asphalt 8 the phone doesn't respond to touches until a couple minutes after the game has been fully loaded.
Even after a hard reset/factory reset the screen will sometimes be unresponsive upon the initial welcome/setup screen and then it will become responsive and you can go through the whole setup without an issue.
Any insight? Any suggestions? If I can't figure it out I'll just get rid of it but it's in great condition a shame it just doesn't function properly.
Thanks in advance!

Looks like some sort of hardware issue...
But before you start to worry...
This might sound like a stupid question but have you tried cleaning your screen with some cleaning solutions?
Sometimes dust mixed with dried sweat can cause severe touch responsiveness issues even if the screen looks like it's clean.

This is an older thread, but maybe I can help someone.
I replaced a touchscreen on a LG G6 and saw that the touchscreen did not work if the back cover was not mounted correctly and the data transfer between the phone and the fingerprint sensor was interrupted. This may be a common problem for users because the connector is small and the back cover is attached with a double-sided tape nearby this connector. It seems that the touch screen is disabled by the phone software without the back cover.

MaBaGeMiFlo said:
This is an older thread, but maybe I can help someone.
I replaced a touchscreen on a LG G6 and saw that the touchscreen did not work if the back cover was not mounted correctly and the data transfer between the phone and the fingerprint sensor was interrupted. This may be a common problem for users because the connector is small and the back cover is attached with a double-sided tape nearby this connector. It seems that the touch screen is disabled by the phone software without the back cover.
Click to expand...
Click to collapse
Thank you so much for this comment!
My gf phone had problems lagging and becoming insensitive to touch, the problem got worse and worse, almost never responding anymore. Performed a factory reset etc, didn't help.
After reading your comment I tried pushing on the back cover while swiping. Now I'm able to revive the phone after pushing hard on the top and bottom left corners, of the back cover.
Thanks a mille !

Lg g6 has back panel from glass and under it you have contact for fingerprint sensor.Somehow if the back panel is loose it can cause touch fail,and you cant use the device touch function!
--->FIX:
So you will have to turn screen off using back button,and then try to press back glass on left and right side of the camera lens !
Then simultaneously press the power button and try to use the touch .
If it does not work tru again around camera lens and turn off screen each time you press the back glass!
For me it worked !

LG V35 double tap doesn't unlock screen, always on display doesn't work too - Help!

Hey guys, just got LG V35 updated it to android Pie, everything seemed fine, but i can't normally unlock phone. On main screen i can double tap and it locks, however double tapping again, doesn't unlock phone, as if screen froze. Also fingerprint button doesn't work either, i mean i need to press it twice slowly and only then screen turns on and shows lock screen, always on display also doesn't work. After simple restart those features work, but after a minute, same thing happening again. Also noticed, that if someone calls, screen is also unresponsive. Got phone couple days ago. Any solution ?

Tadziunia said:
Hey guys, just got LG V35 updated it to android Pie, everything seemed fine, but i can't normally unlock phone. On main screen i can double tap and it locks, however double tapping again, doesn't unlock phone, as if screen froze. Also fingerprint button doesn't work either, i mean i need to press it twice slowly and only then screen turns on and shows lock screen, always on display also doesn't work. After simple restart those features work, but after a minute, same thing happening again. Also noticed, that if someone calls, screen is also unresponsive. Got phone couple days ago. Any solution ?
Click to expand...
Click to collapse
i had the same issue when i got mine. i think the screen protector i installed was the issue-it only had adhesive around the the edge and started to come off. i returned that one and replaced it with another make and haven't had the "knock on/off" issue since. good luck
tom

tomdi1999 said:
i had the same issue when i got mine. i think the screen protector i installed was the issue-it only had adhesive around the the edge and started to come off. i returned that one and replaced it with another make and haven't had the "knock on/off" issue since. good luck
tom
Click to expand...
Click to collapse
I agree with tomdi1999 and also have used the adhesive around the edge screen protector but they interfered with screen touch sensitivity, it is as if having a couple of fingers touching the screen permanently while trying to double tap or unlock the phone via power button. If you have any glass screen protector, try removing the screen protector and double tap again to see if it fixes the issue. If you are not wanting to remove the screen protector first and want to do some troubleshooting, try run touch screen test via the hidden menu (assuming your v35 is AT&T version) by dialing *#546368#*350# (Be warned that some options in this menu can really mess up your phone so don't go around messing with options in this menu randomly) in the phone dialer. In hidden menu select Device Test -> SAAT -> Service Menu - Manual Test -> Touch Draw Test. If, with screen protector on you are having trouble doing this test, remove the screen protector, clean the screen, and do the test again. If you still have trouble with touch screen it is probably a hardware problem or could be software problem but unlikely though. Also, place a test call to someone and slowly place your hand to cover the ear piece and proximity sensor area to see if screen goes dark. This is to check if your proximity sensor is working properly because if it is not then it could be the reason that double tap to wake is not working, although it doesn't explain why your power button is responding slowly, that points toward the phone processor being busy due to ghost touches such as due to bad screen protector or just a faulty power button (but what are the chances of having a faulty power button and double tap to wake going bad at the same time lol?).
I remember that years back on LG G4 double tap function would stop working if you had the screen replaced or sent in the phone to LG for repairs such as repair for notorious bootloop issues and it turned out that there was a small rubber piece that went around the proximity sensor that people were forgetting to put back when replacing screen or doing other repairs which basically broke the proximity sensor. Proximity sensor is suppose to disable screen wake up due to accidental double taps such as when phone is in pocket but if proximity sensor is malfunctioning it will not let phone wake even when you double tap to wake it.
If you figure out what was wrong and/or fixed your issue, please do post back so it can help others. Thanks.
Edit: If you are looking for a good screen protector try Skinomi or Armor Suit wet screen protectors. They are not glass and are a pain to put on but once you install them and let them dry, they are awesome.

It helped me thanks a million!
wouldn't think ever it was the screen protector, thought one of my apps...
I've removed it and it was back to normal.
thanks again