Hi everyone
note : I am too bad in English
I have bought a used Note 4 and it was on kk and in the sitting model name : n910f I tried to update to newer version I downloaded lollipop n910f form sammobile and tried to install it from the Odin but it doesn't
I noticed in the download mod the device is n910p so I return to sammobile and downloaded 6.0.1 of n910p
and I installed it and work good but I have two problems (the language and the locked sim card)
I search in many website to unlock it but I discovered I can unlock it by app it's called ssu or something like that I downloaded the app but it doesn't work and I discovered it work only on kk I tried to return to kk but I can't !! I don't know why
and I tried to install lollipop custom and official Roms and I failed too
so can any body tell what should I do with this phone ????
Related
My N4 910F, bought from Swedish 3.. Is it possible to download a new firmware and via Odin reflash a stock clean rom? Example from Poland, Uk or any other similar nearby country? My S5 was from the open market and when lollipop came ill used a firmware from Poland, long before it came to sweden.. And that work fina, but, that phone was not from 3.
Sammobile have a 3 based firmware, ill think. (sweden 3 - 4.4.4) but also Nordic NEE 4.4.4
Yes you can' if you want DBT/BTU/ is perfect fastest, cleaner, bug free
Thanks ?
Maybe its possible to use lollipop 5.0.1 or must i use a 4.4.4 firmware first?
Anyway, Thanks! ?
It's up to you if you want you can install lollipop and if you want you can downgrade to kitkat as well
I answer my self to maybe help any else..
I'll flashed back and away my rooted 4.4.4 orginal firmware.. After i replaced it with LP 5.0.1 German firmware.. After first start i flash cf autoroot, then philz.. To be 100% sure i boot in to recovery and did a factory reset.. My N4 works perfectly! But.. 3 apps from Swedish 3 is still there? I can delete them but i find it strange?! My bootup logo from 3 is gone..
Before installing and after installation do full factory reset from recovery
Hi, I'm kind of new to android in general and I'm sorry if I am somehow posting this in the wrong place. I switching through a couple of lollipop roms for the SM-N9006 Note 3 Chinese variant, I found that pretty much every N9005 or N900A works for this phone, but I'm always having issues with the camera recording on these lollipop roms, it either force closes, freezes, or shuts my phone off. I later discovered that my modem needs to be updated to fix this. I tried numerous N9005 firmwares and modems which all gave me some sort of an error on odin, I decided to use to use a N9006 lollipop firmware which successfully flashed. When I checked my baseband number after the phone booted up, it still displays the kitkat baseband and my camcorder still fcs. Could any one provide me with a solution, perhaps an earlier version of the camera app, an unbranded lollipop modem for the note 3, etc?
Thanks in advance
u need to upgrade ur modem from odin and install rom for n900x not N900 or n9005 or u can check note 3 themes and apps u can use camera mod or m9 camera or cm12 camera if u want
How would I update my modem?
ayoubkechchour said:
u need to upgrade ur modem from odin and install rom for n900x not N900 or n9005 or u can check note 3 themes and apps u can use camera mod or m9 camera or cm12 camera if u want
Click to expand...
Click to collapse
Do I need to extract the modem out of the firmware file and reflash it? Or could I just flash one in cwm? Thanks for replying
I fixed it!
Alright peeps, I managed to solve the problem. I first flashed the last Kitkat update for the N9006 from Sammobile, then I just reflashed the lollipop update an now my modem appears updated, video recording works! Thanks for those who took time and looked at this post and those who tried to help me.
I'm not sure..someone please close the thread?
I can't seem to install the stock BOD2 firmware using Odin.
There are currently 4 versions available on sammobile, from which three are xxx (Orange), xxx being the country and one Uknown.
I have tried them all 4, but none of them work and result in FAILED at the last couple bit.
However, when I install a BOC5 (the previous firmware), it goes along with no problem.
So currently I am on BOC5 firmware and would like to go to BOD2 to make use of the new BOD2 custom roms..
Does anyone know why it presents FAILED with BOD2 firmware?
Got same problem here. Do we need pit file?
Dijkertje said:
I can't seem to install the stock BOD2 firmware using Odin.
There are currently 4 versions available on sammobile, from which three are xxx (Orange), xxx being the country and one Uknown.
I have tried them all 4, but none of them work and result in FAILED at the last couple bit.
However, when I install a BOC5 (the previous firmware), it goes along with no problem.
So currently I am on BOC5 firmware and would like to go to BOD2 to make use of the new BOD2 custom roms..
Does anyone know why it presents FAILED with BOD2 firmware?
Click to expand...
Click to collapse
hi ,
first ,this issue was discussed in full ,this thread ........
http://forum.xda-developers.com/note-4/general/910f-official-lolipop-germany-dbt-t3029508/page182
read @_alexndr post #1818 i quote ..............
"Original BOD2 firmware can't be successfully flashed by most of users due to large /preload partition (hidden.img.ext4)."
You can flash his repack version if you want to .?
http://forum.xda-developers.com/note-4/general/rom-unofficial-repacked-lollipop-t3105093
good luck
Thanks but is there a way of installing it? I want to install latest EE. version as I am on EE and just bought a 2nd hand Note 4 but it came with German stock one. And I find it very laggy and battery dies real quick.
Want to try out the latest EE one from Sam mobile but it gives me size error
Hi Guys,
Recently got the a Note4 after being an S4 fan for 2 years. Tried to go ahead and root my device and i presume failed miserably. I don't think i did enough background research like i did before when rooting my S4.
Model: SM-N910G
Android V: 5.11
So,
I followed this to root my NOTE4: http://forum.xda-developers.com/note-4/orig-development/sm-n910-cf-auto-root-t2897428
Then my phone didn't pick up any signal and kept restarting every 2 mins once the device was turned on. So i looked around some more threads and saw a post that i should download and boot this:
http://forum.xda-developers.com/showpost.php?p=62241991&postcount=56
I still have no Mobile data signal and my phone keeps restarting!
Any guidance how to get it back to normal? I don't even care about having my phone rooted anymore - Or am i completely stuffed?
Many thanks!
download stock firmware from sammobile and flash with odin.
You've been doing things wrongly.
Firstly, the CF autoroot for N910G currently only supports up to android 5.0.1.
Secondly, you should not ever install kernel that is not for your specific phone model. Sprint Note 4 =/= International Note 4 Snapdragon (N910G)
To restore back to normal, download official firmware for your phone (N910G). And then flash it using Odin 3.10
Edit: Download official stock firmware from either Sammobile or Samsung-updates. Or u can use the firmware downloader created by fellow XDA member. Be sure to download the correct firmware version/carrier
Thanks guys. Problem solved!
Hey everyone
summary :
how can i install a rom file for sm-g900f on sm-g9006v ? with altering the rom file or my phone.
notes:
-they have exactly the same hardware but one is china version
-phone originally had android 5.0 and every where on its back and case says its g900f
the phones ''about device'' said g900f too
full version :
i bought a s5 (g900f) a couple of years back, but it didnt receive the 6.0.1 update like others, so now i decided to update it manually using odin.
but in download mode its version was g9006v
so i found the android 6.0.1 rom for it and installed it using odin
but unfortunately it doesnt have any of the google services and has a couple of system apps that cant be deleted of disabled and they are draining the battery.
so now i want to go back to international 5.0 or 6.0.1
considering that both versions have the same hardware and that somehow it had g900f rom on it before
i was wondering how could i adjust my phone or the rom file (tar) to install it.
thank you for ur help
here is my email:
[email protected]