I successfully completed the conversion to dev mode and root my device. I have the multi-system kernel at this time but was wondering which kernel gives the best battery life and which are most people using?
The only 2 kernels I am aware of that are available are the emotion and multi-system ones. Is there something else?
My N4 performs well with this multi-system kernel Courtesy of @hsbadr
I've been using the Eceed Kernel by @kairi_zeroblade:
http://forum.xda-developers.com/note-4/snapdragon-dev/kernel-xceed-t3344742
there is a verizon version. I had no problems flashing this onto my jasmine rom 4.3 running android 5.1.1.
One user reported loosing data(4g) with this kernel but didnt give any info on what rom or firmware he was running.
the kernel works great so far, much better battery life. Scores 82,000+ consistently on antutu.
The kernel comes pre configured. The only things you can change if you wish is the cpu voltages, cpu currents, and a couple of read ahead tweaks in Synapse
the only thing I noticed was some camera lag (a bit slower to open and to switch from front to rear) that @kairi_zeroblade said could be due to the strict cpu settings. I believe hes working on a 6.0 MM kernel right now that should work for verizon.
Definitely worth a shot to check it out!!!! If you have any feedback just post in the original thread.
joemill said:
I've been using the Eceed Kernel by @kairi_zeroblade:
http://forum.xda-developers.com/note-4/snapdragon-dev/kernel-xceed-t3344742
there is a verizon version. I had no problems flashing this onto my jasmine rom 4.3 running android 5.1.1.
One user reported loosing data(4g) with this kernel but didnt give any info on what rom or firmware he was running.
the kernel works great so far, much better battery life. Scores 82,000+ consistently on antutu.
The kernel comes pre configured. The only things you can change if you wish is the cpu voltages, cpu currents, and a couple of read ahead tweaks in Synapse
the only thing I noticed was some camera lag (a bit slower to open and to switch from front to rear) that @kairi_zeroblade said could be due to the strict cpu settings. I believe hes working on a 6.0 MM kernel right now that should work for verizon.
Definitely worth a shot to check it out!!!! If you have any feedback just post in the original thread.
Click to expand...
Click to collapse
Got same results in antutu which is pretty awesome as fast as s6 but have no data on kyubi'so rom
This one: http://forum.xda-developers.com/not...nt/firmware-safe-upgrade-to-lollipop-t3313224
I use the screen mirroring option all the time. I would say test that out to determine which kernel is best for you. I know one of the kernels floating around doesn't support screen mirroring which is a big no no for me.
Sent from my SM-N910V using Tapatalk
---------- Post added at 05:13 PM ---------- Previous post was at 05:12 PM ----------
Not really big on Viper and over clocking so maybe someone else could shed some light on those features.
Sent from my SM-N910V using Tapatalk
axeldiks1 said:
Got same results in antutu which is pretty awesome as fast as s6 but have no data on kyubi'so rom
Click to expand...
Click to collapse
How are you guys getting over 82,000+. I'm only getting 72,000 with Jasmine
Dovanote said:
How are you guys getting over 82,000+. I'm only getting 72,000 with Jasmine
Click to expand...
Click to collapse
The Xceed kernel is over clocked to 2.8ghz and has various other tweaks
joemill said:
The Xceed kernel is over clocked to 2.8ghz and has various other tweaks
Click to expand...
Click to collapse
I haven't tweaked anything yet and this kernal is pretty nice. Battery life seems to last longer. Gotta test for a few more days.
Dovanote said:
I haven't tweaked anything yet and this kernal is pretty nice. Battery life seems to last longer. Gotta test for a few more days.
Click to expand...
Click to collapse
Xceed comes pre tweaked. The only thing that may give a little more speed is changing the internal and SD card read ahead from 512 to 2048mb and cfq as the scheduler. Most other adjustments are untouchable
any 6.0 roms working on the verizon note 4?
joemill said:
I've been using the Eceed Kernel by @kairi_zeroblade:
http://forum.xda-developers.com/note-4/snapdragon-dev/kernel-xceed-t3344742
there is a verizon version. I had no problems flashing this onto my jasmine rom 4.3 running android 5.1.1.
One user reported loosing data(4g) with this kernel but didnt give any info on what rom or firmware he was running.
the kernel works great so far, much better battery life. Scores 82,000+ consistently on antutu.
The kernel comes pre configured. The only things you can change if you wish is the cpu voltages, cpu currents, and a couple of read ahead tweaks in Synapse
the only thing I noticed was some camera lag (a bit slower to open and to switch from front to rear) that @kairi_zeroblade said could be due to the strict cpu settings. I believe hes working on a 6.0 MM kernel right now that should work for verizon.
Definitely worth a shot to check it out!!!! If you have any feedback just post in the original thread.
Click to expand...
Click to collapse
I lost my 4g also and I am on kubyi ultimate.I really want to try this kernel again, but I need the 4g..
Sent from my SM-N920F using Tapatalk
lolwatpear said:
any 6.0 roms working on the verizon note 4?
Click to expand...
Click to collapse
Hsbadr has a CM 13 port which is 6.0
CM 13 6.0.1 Unofficial
MatroxD said:
I lost my 4g also and I am on kubyi ultimate.I really want to try this kernel again, but I need the 4g..
Sent from my SM-N920F using Tapatalk
Click to expand...
Click to collapse
So looks like the kubyi rom will not work with this kernel. :/ I'm guessing the data fix will have to be patched into the Xceed kernel.
I haven't had the time to read through this:
http://forum.xda-developers.com/note-4-tmobile/general/running-international-roms-n910t-t3220738
Is it only for the n910t varient?
Does anyone have any info on the data fix for the verizon kernel so maybe @kairi_zeroblade can add it to the next build.?
joemill said:
So looks like the kubyi rom will not work with this kernel. :/ I'm guessing the data fix will have to be patched into the Xceed kernel.
I haven't had the time to read through this:
http://forum.xda-developers.com/note-4-tmobile/general/running-international-roms-n910t-t3220738
Is it only for the n910t varient?
Does anyone have any info on the data fix for the verizon kernel so maybe @kairi_zeroblade can add it to the next build.?
Click to expand...
Click to collapse
What info do you want to know about the datafix for Kyubi? It has multisystem kernel included. So far that is the only kernel that is compatible with Kyubi. No changes to the kernel were made to make it work with Kyubi. It just happened to work when I tried flashing Kyubi on our phone. So it became part of the datafix since it worked so well. I think if anything, @kairi_zeroblade should talk with @hsbadr the developer of multisystem kernel. We got lucky that hsbadr's kernel worked !
bostonsean said:
Hsbadr has a CM 13 port which is 6.0
CM 13 6.0.1 Unofficial
Click to expand...
Click to collapse
I meant stock mm roms. I noticed the snapdragon note 4 forums have them, but I'm not sure if they will work on the Verizon note 4.
jcip17 said:
What info do you want to know about the datafix for Kyubi? It has multisystem kernel included. So far that is the only kernel that is compatible with Kyubi. No changes to the kernel were made to make it work with Kyubi. It just happened to work when I tried flashing Kyubi on our phone. So it became part of the datafix since it worked so well. I think if anything, @kairi_zeroblade should talk with @hsbadr the developer of multisystem kernel. We got lucky that hsbadr's kernel worked !
Click to expand...
Click to collapse
I was thinking there was some type of patch or fix @hsbadr may have implemented into the multisystem kernel to get it to work. looks like @kairi_zeroblade is focusing on marshmallow though which should be awesome! Can't wait for us to get the update
I just re downloaded emotion kernel and am going to try it for a little bit.. Strange thing is, my battery percent jumped from 20 to 42 after reboot.. I will have to see how it goes..
Sent from my SM-N920F using Tapatalk
I second the Eceed kernel. Im on the jasmine rom and was using the emotion kernel but I noticed a fast drain on the battery. Switched over to Eceed a few days ago and have experienced a huge improvement on battery life, without the sacrifice in speed. Thanks Joemill for the suggestion.
Read about Exceed kernel so I gave it a try and thats the one Im sticking with. Runs great,using Jasmine Rom with it as well,battery life is great and my phone is very quick,highly recommend it.
Related
Tested on all 4.4.+ Roms seemed a little improvement mostly on benchmarks scores....?
Make a Nandroid before anything & flash at your own risk...
Don't use ART.
ZIP consists of optimized bionic and Dalvik libraries plus all necessary dependencies. If you end up in a bootloop after flashing, simply re-flash your current ROM. No wipe needed.
Credit: kszaq
**EDIT** Please note that this is all stock except for root.
Thank you!
3 Runs of AnTuTu prior:
- 20073
- 20114
- 20135
Avg: 20108
Flashed Zip. Rebooted and let sit for a few min and then rebooted again.
3 Runs of AnTuTu Post:
- 24188
- 24619
- 24649
Avg: 24485
~22% Benchmark Performance Increase!
I haven't had time to see "real world" impact on speed or battery but thought I'd share the numbers at least.
Thank you again!
Yeah, got 4k boost in AnTuTu score from this.
Haven't really noticed any real difference, though.
Yeah, this optimization works great with overclocking too, stock rom/tk-glitch kernel.
Has nobody else used this yet? Will this work for any 4.4 rom, cm 11 or aokp? And is this better tha trying art?
kingston73 said:
Has nobody else used this yet? Will this work for any 4.4 rom, cm 11 or aokp? And is this better tha trying art?
Click to expand...
Click to collapse
I have it installed. While I hadn't benchmarked this device prior to flashing, I can say that I'm getting in the 24000's on Antutu post-flash. I also can't speak regarding ART as I haven't enabled it since rooting and only ran with it on for the first day I had it so I don't remember.
Edit: all else is stock, aside from this zip.
Sent from my Nexus 7 using Tapatalk 4
vince2008 said:
Yeah, this optimization works great with overclocking too, stock rom/tk-glitch kernel.
Click to expand...
Click to collapse
30k? How did you get this kind of score? I'm overclocked to 1.8GHz, haven't flashed this, but got 23k is all.
Is there any noticeable advantage of flashing this? I always love to improve my tablet.
Are these any different from the ones here?
http://forum.xda-developers.com/showthread.php?t=2546120
Nope they are the same if u look at the credits its his work.
Sent from my SGH-T679 using Tapatalk
hello
...Awesome... said:
Nope they are the same if u look at the credits its his work.
Sent from my SGH-T679 using Tapatalk
Click to expand...
Click to collapse
Hello, I'm newbie here. I just downloaded the files. How I flash this patch. I did press vol down and power but I cant choose any thing. just written ' downloading do not turn off target'
Closing this thread - it is painfully out of date, and long replaced by other threads. Please do not bump year old threads with new questions.
Additionally, given the problems that this can cause if you don't understand what you are doing, i can only give the friendly recommendation that you do far more reading before attempting this (or other similar tweaks and patches).
Hi, looking for the best mod and kernel for the 910C, i'm into smoothnes, (scrolling) general performance, battery life, and camera being same or better then stock, thanks!
dazed1 said:
Hi, looking for the best mod and kernel for the 910C, i'm into smoothnes, (scrolling) general performance, battery life, and camera being same or better then stock, thanks!
Click to expand...
Click to collapse
There is no "Best". There are only choices. Everyone has different needs.
Try downloading a few different ones and give them a go and see what works best for you.
sent from somewhere
liquidguru said:
There is no "Best". There are only choices. Everyone has different needs.
Try downloading a few different ones and give them a go and see what works best for you.
sent from somewhere
Click to expand...
Click to collapse
I agree, but generally i know that for G2/G3 many users liked Cloudy, and dorimanx combo, i wonder if there is something similar like that combo for the Note 4
dazed1 said:
I agree, but generally i know that for G2/G3 many users liked Cloudy, and dorimanx combo, i wonder if there is something similar like that combo for the Note 4
Click to expand...
Click to collapse
Personally I'm using Sweet ROM and Ultimate Kernel v9. I have the N910H variant and all is working good for me
sent from somewhere
Im using stock and it's amazing for me (I910U)
stock is better always never try xnote ...coz of poor batter life i dnt know others
I am in the same boat. For the past 3 months I have been trying to get ultimate kernel. But XDA is acting stupid when it comes to this kernel.
I followed the complete fight that the author had not made it open source.
Then latter I see that somebody posted the open source code for Ultimate kernel but some self rightous mod removed the link.
I just do not get why the issue is with XDA and Ultimate kernel. If somebody can help me get Ultimate Kernel I would be much obliged.
I have tried all the other ROMs and Kernels posted on XDA and sad to say this but the rooted and basic tweaked stock ROM and kernel proves to be the best over and over again.
Today was the 10th thim I have reverted to stock. In the last few months. And Im re-runing Geek Bench to confirm that my phone is back to performing well.
For some crazy reason sometimes after loading another ROM / Kernel even restoring does not bring back the best bench numbers. Then I have to do a factory Imagine and start again from scratch. My best Single Core number on stock was 1092 and 3509 on multi core. Today after a restore I am seeing Single Core 790 and Multi Core 2941.
So either I find Ultimate Kernel or I reset to stock.
Love Resurrection Remix.
Deacon75 said:
Love Resurrection Remix.
Click to expand...
Click to collapse
can I install it on N910C exynos?
Yes, you can install it on the N910C.
Deacon75 said:
Yes, you can install it on the N910C.
Click to expand...
Click to collapse
the latest one, for exynos?
No, it's Android Nougat version 7.1.2.
RonChinoy said:
I am in the same boat. For the past 3 months I have been trying to get ultimate kernel. But XDA is acting stupid when it comes to this kernel.
I followed the complete fight that the author had not made it open source.
Then latter I see that somebody posted the open source code for Ultimate kernel but some self rightous mod removed the link.
I just do not get why the issue is with XDA and Ultimate kernel. If somebody can help me get Ultimate Kernel I would be much obliged.
I have tried all the other ROMs and Kernels posted on XDA and sad to say this but the rooted and basic tweaked stock ROM and kernel proves to be the best over and over again.
Today was the 10th thim I have reverted to stock. In the last few months. And Im re-runing Geek Bench to confirm that my phone is back to performing well.
For some crazy reason sometimes after loading another ROM / Kernel even restoring does not bring back the best bench numbers. Then I have to do a factory Imagine and start again from scratch. My best Single Core number on stock was 1092 and 3509 on multi core. Today after a restore I am seeing Single Core 790 and Multi Core 2941.
So either I find Ultimate Kernel or I reset to stock.
Click to expand...
Click to collapse
Go to this link, use your username to access and download
https://drive.google.com/file/d/1jnXeJ0gEJSBTmqG3ynA-SEgfrp-2ytdY/view?usp=sharing
---------- Post added at 11:53 PM ---------- Previous post was at 11:34 PM ----------
For me since April 2017 is the NEMESIS REFINED V3.8.5 N7 Port by ananjaser1211 and SpceLemon kernel
Agreed! about Ultimate Kernel: In my humble opinion, the kernel is Legendary, had there been one built for MM, I would surely be using it:good:
I have CM13 on the g900V and have some problems with CPU frequencies (posted on the ROM thread). It seems the only custom kernel for this phone and ROM is an unofficial boeffla kernel which was last updated in April and with which I had some problems too (random reboots).
Really aren't there any other kernels that work on g900V and CM13?
Thanks!
Some g900f kernels work on the g900v like try crazy super kernel
sent from my nexus 4 I also own a voyager tablet and an I-phone 4s
I want to report that I just installed the original Boeffla 3.3 for G900F and it's working just fine.
The issue with simple_ondemand for GPU governor seems fixed. The issue that I cannot set the lower CPU freq lower than 1881 MHz remains, though. (workaround in another post)
EDIT: Although almost everything runs smoothly, and I get amazing battery life with some CPU governors, camera doesn't work, it "does not connect"
Gonna try crazy super kernel as recommended
I used crazy sure kernel last time I used it 3 months or so ago the features I used worked including changing CPU MHz and fast charge and governors worked that is what I used
Sent from my Nexus 4 using Tapatalk
dronkit said:
I want to report that I just installed the original Boeffla 3.3 for G900F and it's working just fine.
The issue with simple_ondemand for GPU governor seems fixed. The issue that I cannot set the lower CPU freq lower than 1881 MHz remains, though.
Click to expand...
Click to collapse
You can install the 900F kernel on the 900V?
Yeah I used to do it back when I owned a g900v
sent from my nexus 4 using Tapatalk I also own a voyager tablet and I also own an I phone 4s
[email protected] said:
Yeah I used to do it back when I owned a g900v
sent from my nexus 4 using Tapatalk I also own a voyager tablet and I also own an I phone 4s
Click to expand...
Click to collapse
Huh, yeah it worked, crazy! Had no clue you could do that. Cool, now my SElinux is permissive.
ldeveraux said:
Huh, yeah it worked, crazy!
Click to expand...
Click to collapse
does your camera work? mine doesn't in g900f boeffla kernel
dronkit said:
does your camera work? mine doesn't in g900f boeffla kernel
Click to expand...
Click to collapse
Yes, I just tested and it's working fine.
[email protected] said:
I used crazy sure kernel last time I used it 3 months or so ago the features I used worked including changing CPU MHz and fast charge and governors worked that is what I used
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
ldeveraux said:
Yes, I just tested and it's working fine.
Click to expand...
Click to collapse
Which one are you using? I tried to TWRP install this "anykernel crazy superkernel" and i get "this kernel is not compatible with your device" and does not install.
dronkit said:
Which one are you using? I tried to TWRP install this "anykernel crazy superkernel" and i get "this kernel is not compatible with your device" and does not install.
Click to expand...
Click to collapse
Boeffla's works fine:
http://forum.xda-developers.com/gal...ernel-boeffla-kernel-1-0-beta1-23-03-t3062073
ldeveraux said:
Boeffla's works fine:
http://forum.xda-developers.com/gal...ernel-boeffla-kernel-1-0-beta1-23-03-t3062073
Click to expand...
Click to collapse
I don't understand. The link you posted is a kernel for Touchwiz (stock samsung android), isn't it? We're talking CM13
Like I said, I tried Boeffla's kernel for CM13 but my camera doesn't work.
Still waiting for hauckk since he said he used crazy super kernel but I can't install it.
Edit the zip file for crazy super kernel and remove the asserts line guide here http://forums.androidcentral.com/optimus-v-rooting-roms-hacks/182438-solved-assert-failed.html
Sent from my iPhone using Tapatalk
[email protected] said:
Edit the zip file for crazy super kernel and remove the asserts line guide here http://forums.androidcentral.com/optimus-v-rooting-roms-hacks/182438-solved-assert-failed.html
Click to expand...
Click to collapse
Thanks, what I did was to edit out the check in the install script.
But, still, I get no camera ("cannot connect to camera"). Exactly what version of crazy super kernel do you have working? I tried the latest (16.0) and no camera. Gonna try some newer test versions now.
Finally!
I can report camera is working!
I had to install the latest CM13 nightly. The latest snapshot does not work. It's not on CM's site anymore so here's a link.
The kernel I used is the very latest test build. This link is the developer's folder which will hopefully contain the latest ones. Mine I pulled it from the folder "cm13-new test kernels".
If anyone wants, I can explain how to edit the script so the kernel doesn't refuse to install in g900v.
This is only for note 7 S7 custom rom port
I am testing it now its been 2hrs not freezing or rebooting. To my conclusion its very stable. Battery seems better.
Quote:
Originally Posted by Ram121
It will be published here
Changelog for RamKernel V7
1. Source updated to N910FXXS1DQC3
2. Fixes for F2FS
3. LED control
4. msm_hsic_host wake lock reduction fix
5. Control for msm_hsic_host wake lock
6. Support for KernelAdiutor (Thanks to @Pafcholini)
I am uploading builds for all wait
Special Note - If flashing RamKernel_V7 when KernelAdiutor is already installed the cpu cores don't want to turn on and off. So clear data of KernelAdiutor and reboot
Here is the Link for Permissive
For enforcing
Can you all people who tried this please kindly report if its stable. I heard a rumor that its not stable on N910T. I been using it for almost 19hrs. already and I don't have any problem at all. Thank You.
N910t it's freezing after a couple of minutes, test permisive, enforcing freeze at startup, stock rom EQB1
aviathan said:
N910t it's freezing after a couple of minutes, test permisive, enforcing freeze at startup, stock rom EQB1
Click to expand...
Click to collapse
thanks for the response. are using n7 port? this is made only for Note 7 port it won't work on stock.
Sorry i'm on stock i didnt read that was for port, my bad
It will randomly reboot. About 1 or 2 times a day. Ver 5 is more stable.
Sent from my SM-N9200 using XDA-Developers Legacy app
mdiaz33685 said:
It will randomly reboot. About 1 or 2 times a day. Ver 5 is more stable.
Sent from my SM-N9200 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yes you are right. When I was Testing it I am using wifi. Its been stable for for almost whole day without freezing or fc. Then, when I put sim card and data was on that's the time my phone become laggy and freeze. That's why I realize its only stable when connected to wifi. I ask Ram121 but until now still waiting for it. I hope version 8 will be stable.
Ram kernel RC1 working great.. tried all data apps running all day, not 1 reboot. now go grab it.
Sent from my SM-N9200 using XDA-Developers Legacy app
mdiaz33685 said:
Ram kernel RC1 working great.. tried all data apps running all day, not 1 reboot. now go grab it.
Sent from my SM-N9200 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yup I test it too and its fine and very stable. I need more test. I am in the middle of a new rom right now testing it with Emotion (Emotion-TW-stable-MM-beta-r25-RC7_test) kernel that Lanc City modify it.
Will it work on dr ketan rom of note 7??
Model no:-sm-n910t
7 & 8 are stable the first day or two, but as data accumulates the instability progresses. I noticed regularly cleaning junk files, say every hour can help... a little bit
Hey all. I've spent most my time here on sprint forum because i had unlocked n910p.
Well i recently got a n910t and wanted some experienced opinions on what's the best stable release of Ram kernel for this device?
I see this Op states v7 is good, but since there's been more releases, was wondering if that's changed.
Fyi, i don't need. cutting edge or the bells and whistles like extra governors. Just most stable running cool version? Thanks!
aaron74 said:
Hey all. I've spent most my time here on sprint forum because i had unlocked n910p.
Well i recently got a n910t and wanted some experienced opinions on what's the best stable release of Ram kernel for this device?
I see this Op states v7 is good, but since there's been more releases, was wondering if that's changed.
Fyi, i don't need. cutting edge or the bells and whistles like extra governors. Just most stable running cool version? Thanks!
Click to expand...
Click to collapse
If you going to use N7 port your best bet is Ram kernel v5 is the last stable kernel but RC1 and 2 is the newest beta. Between v5 and RC1 is unstable. For stock rooted rom you cannot go wrong Beastmod kernel .
gmenik6 said:
If you going to use N7 port your best bet is Ram kernel v5 is the last stable kernel but RC1 and 2 is the newest beta. Between v5 and RC1 is unstable. For stock rooted rom you cannot go wrong Beastmod kernel .
Click to expand...
Click to collapse
Awesome, Thanks! Yes, i have beastmode and familiar with freeza, he made sprint kernels to.
And good, I'll try v5. Yes I've tried rc1 and 2, and even though they worked, it seemed like i had heat problems. Also i don't mess with governors so i don't need all the added stuff.
Thanks :good:
We have another post for ROM. Why do we not have another post for Kernel ?
As we can see, we have more than 5 kernels that are from XDA developer or someone else. But which one is really good for your ROM and which one still keep updating ?
I have been using OP5T for 2 months. Have used so many kernels but i still got stuck in those and do not know which is more stable. I am planning to use the kernel from Blu_Spark. Is that good ?
Post your favourite kernel and tell everybody why you use that. It will help newbie to pick what they want.
I am using Flash kernel at the moment but I have already tried Blu, franko, arter, ElementalX etc, but honestly for me it's difficult to see any difference since this phone have already a great battery life and great speed. On my previous phone (S8) the custom kernel gives a big advantage since the phone have tons of bloat and and isn't running stock like Android.
vvt4994 said:
We have another post for ROM. Why do we not have another post for Kernel ?
As we can see, we have more than 5 kernels that are from XDA developer or someone else. But which one is really good for your ROM and which one still keep updating ?
I have been using OP5T for 2 months. Have used so many kernels but i still got stuck in those and do not know which is more stable. I am planning to use the kernel from Blu_Spark. Is that good ?
Post your favourite kernel and tell everybody why you use that. It will help newbie to pick what they want.
Click to expand...
Click to collapse
I have tried Blu and Franco for now and both have been very good. I really think kernel performance depends on the combo with the ROM as well as your device. I'm on Liquid Remix with Franco currently but I may give Resurrection Remix a try with Flash. If I had more time, I'd flash every ROM with every kernel to get a feel for all the possibilities LOL. :good:
For me Franco and flash kernel are the Best.... Now with ob3 with Franco kernel
Enviado desde mi ONEPLUS A5010 mediante Tapatalk
Did the Franco improve battery or performance? Someone Tried the Boeffla?
At the moment, both Flash Kernel and RenderKernel are great options in my opinion. I have tried most of the other kernels on xda and if you are looking specifically for smoothness/speed, these are the two you should test first. I do not run battery cycles; everyones daily use scenario really differs too much.
Flash Kernel currently has some kernel features I need (Kcal support & wakelock blocker) while RenderKernel does not have these features quite yet. While it lacks in some features, RenderKernel is undoubtedly the smoothest kernel for 5T right now.
I am on a 5T with OOS 5.0.3.
I like Franco but recently some custom ROMs have WIFI cannot turn on problem after I flash Franco kernel.
:fingers-crossed:
(Don't blame any devs here just sharing.)
crashazz33 said:
At the moment, both Flash Kernel and RenderKernel are great options in my opinion. I have tried most of the other kernels on xda and if you are looking specifically for smoothness/speed, these are the two you should test first. I do not run battery cycles; everyones daily use scenario really differs too much.
Flash Kernel currently has some kernel features I need (Kcal support & wakelock blocker) while RenderKernel does not have these features quite yet. While it lacks in some features, RenderKernel is undoubtedly the smoothest kernel for 5T right now.
I am on a 5T with OOS 5.0.3.
Click to expand...
Click to collapse
Where can I download flash kernel?
mo123456789 said:
Where can I download flash kernel?
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-5t/development/op5t-flash-kernel-v2-15-1-t3729330/page34
I haven't really played around with Kernel choices much.
I use and appreciate the professionalism of ElementalX kernel.
With it's options to adjust for extreme brightness, it quickly became a favorite a couple years ago and I've just stuck with it since.
Now most devs are adding high brightness to their kernels.
I guess I can start checking other kernels out.
I do like that ElementalX stays very stockish, reliable.
I can pretty much flash it and feel confident nothing weird will pop up over the next few days.
CZ Eddie said:
I haven't really played around with Kernel choices much.
I use and appreciate the professionalism of ElementalX kernel.
With it's options to adjust for extreme brightness, it quickly became a favorite a couple years ago and I've just stuck with it since.
Now most devs are adding high brightness to their kernels.
I guess I can start checking other kernels out.
I do like that ElementalX stays very stockish, reliable.
I can pretty much flash it and feel confident nothing weird will pop up over the next few days.
Click to expand...
Click to collapse
ElementalX, Franco, and flash were all my go-to kernels back in the 6p days (just a few months ago, lol), so it's hard to pick, especially since they all ended up on the 5t. Right now I'm on exkernel though I am partial to flash. Battery life is amazing on all 3, but the overclock on ex just adds that extra bit of smoothness that I've never experienced before. Call it placebo but I just love this kernel (exkernel).
any more input?
im curious to know if fsync affects battery performance at all, can someone also test this out if you are on a kernel that enables disabling the fsync feature
virtyx said:
any more input?
im curious to know if fsync affects battery performance at all, can someone also test this out if you are on a kernel that enables disabling the fsync feature
Click to expand...
Click to collapse
Tried it but didn't notice any difference.
Technically it should improve performance when using the phone, but it won't be noticeable.
boeffla
simple and steady, close to stock for daily using.
blu_spark, always on the Fastlane. ?
Does flashing a custom kernel solves Google play services battery drain?
Do I need custom recovery and root to flash a custom kernel? I'm not willing to play with kernel adiutor so I'm not really interested in rooting
luws said:
Does flashing a custom kernel solves Google play services battery drain?
Do I need custom recovery and root to flash a custom kernel? I'm not willing to play with kernel adiutor so I'm not really interested in rooting
Click to expand...
Click to collapse
Custom kernel has nothing to do with google play services. You need custom recovery to flash a kernel, but most kernels for op5t are "flash & forget" which mean there is no reason to change the setting of the kernel.
Sent from my ONEPLUS 5T
vagkoun83 said:
Custom kernel has nothing to do with google play services. You need custom recovery to flash a kernel, but most kernels for op5t are "flash & forget" which mean there is no reason to change the setting of the kernel.
Sent from my ONEPLUS 5T
Click to expand...
Click to collapse
maybe not Google play services specifically, but with my latest phone (zuk z2), kernel was directly related to deep sleep
stock OOS/kernel has a serious issue with Google PS in terms of deep sleep. Besides that, I dont feel any need to flash a custom kernel. SOT is incredible already, and performance is really fluid.
luws said:
maybe not Google play services specifically, but with my latest phone (zuk z2), kernel was directly related to deep sleep
stock OOS/kernel has a serious issue with Google PS in terms of deep sleep. Besides that, I dont feel any need to flash a custom kernel. SOT is incredible already, and performance is really fluid.
Click to expand...
Click to collapse
If you are OK then there is no need to flash a kernel. If an app is crap (like Google services or facebook) the kernel can't do miracles and its not kernels job to control wakelocks of user apps
Sent from my ONEPLUS 5T
I keep changing between blu and new kernel
Not sure which to stick with but I think new kernel gives me a bit more battery