Bluetooth issues - P8lite Q&A, Help & Troubleshooting

Hi,
I own a Huawei P8 Lite, and my bluetooth has been acting crazyyy. It's always turning on and off non-stop! I've tried flashing system, boot, recovery and cust but it didn't work anyway. Should I send it for warranty or is there any fix for this?
Thanks in advance!

It looks like it's working now... I just upgraded to Marshmallow and it's fine

Related

[Q] can't turn gps on after flashed to the stock gingerbread rom

Hi all,
I used this rom below
http://forum.xda-developers.com/showthread.php?t=1175536
Everything worked like a charm except my gps is dead. I can't turn it on, I also tried to use gps fix and gps status, nothing worked.
Are there people know how to fix it? will I flash it again fix it?
Thanks,
please help me. I wiped my phone and cache and reflashed with the same rom, still not working for me
after hours of struggle, I finally got it fixed, I flashed the radio to latest version and it is all working like a charm

Huawei P8 Lite, need to change model number from ALE-L21 to ALE-L23!!!

Hi, I wanted to upgrade to MM my Huawei P8 Lite Ale-L23 so I flashed it to L21 but after 2 days (all was working fine in MM) the Wifi and Bluetooth doesn't work anymore, I can't enable it!! (both are greyed out). Wiping the cache partition doesn't work, I reflashed to MM again, I reflashed to Lollipop, I Wipe cache, system, data, internal storage and install ALE-L23 Rom but it didn't work, the model continues in ALE-L21 and the wifi and Bluetooth are both disabled. Thank you for your suggestions!!
I have the same problem, WiFi, Bluetooth and radio FM are not working. WiFi and Bluetooth kept grey and don't turn to green. Radio gets stuck searching for stations. Any help? The device has only 8 months.

BLE device (HR monitor) not working on NOUGAT

Hi guys,
I upgraded to NOUGAT B371 on my VNS-L21 and the HR monitor I used for a year on MM stopped working. It is found but when i try to connect it doesn't work.. I tried deleting Bluetooth devices, restarting bluetooth...
I tried restarting in safe mode, but I cant turn on bluetooth in safe mode.
I have been using the HR monitor with ENDOMONDO
Any ideas ? Is it a phone (firmware) issue or a app issue ? Does anyone else have problems with BLE devices ?
Thanks
PS: The HR monitor works perfectly on MM, I tested it with my old phone
My texts stoped working and I wanted to root nouget I reset my phone and my texts work again so id try a factor reset or two (back up your data) and hopefully it should work if not flash stock ROM and try update again or just flash nougat if you can.

[Request] Persist.img for ZC551KL

Hello,
I've been without sensors nor camera for a while now (almost a year), got broken because an OTA update. Tried downgrading, didn't work.
Yesterday I managed to root and install TWRP, did some research and heard about ''persist'' partition. I've been searching for similar cases but no luck. Also tried deleting sns.reg
Can someone provide me the persist.img stock file? So I can finally fix my sensors.
Broken sensors:
Gyroscope
Ambient light
Accelerometer
Proximity
Fingerprint
Camera Flash isn't working either.
Foxxo990 said:
Hello,
I've been without sensors nor camera for a while now (almost a year), got broken because an OTA update. Tried downgrading, didn't work.
Yesterday I managed to root and install TWRP, did some research and heard about ''persist'' partition. I've been searching for similar cases but no luck. Also tried deleting sns.reg
Can someone provide me the persist.img stock file? So I can finally fix my sensors.
Broken sensors:
Gyroscope
Ambient light
Accelerometer
Proximity
Fingerprint
Camera Flash isn't working either.
Click to expand...
Click to collapse
Solved, download the firmware version you have here and look for persist.img. The firmware comes with it but the install script doesn't use it. Just flash it:
Code:
fastboot devices
fastboot erase persist
fastboot flash persist persist.img
fastboot reboot
Hello friend,i have similar problems,apart from fingerprint sensor,all my sensors and cameras,camera light are not working,will i loose imei numbers if i flash the persist img ? i dont know how to flash persist img,can you help me please?
Edit: hi i actually fixed my problem by flashing persist.img, all sensors and cameras are working now
Thank you so much
I would like to thank you for this solution, finally, after 2 days trying I have my ZS570KL alive and working faster, I had to try rooting, then it was bricked for some hours, finally I got it rooted, but after deleting that persist/sensors/and.reg it was the same... until i found this thread, everything works good!!! thank you very much
3sgebeams said:
I would like to thank you for this solution, finally, after 2 days trying I have my ZS570KL alive and working faster, I had to try rooting, then it was bricked for some hours, finally I got it rooted, but after deleting that persist/sensors/and.reg it was the same... until i found this thread, everything works good!!! thank you very much
Click to expand...
Click to collapse
Did you also have broken sensors issue and it is fixed now? I want to try it on my ZS570KL too, but is there a persist.img for this phone?
DIXES said:
Did you also have broken sensors issue and it is fixed now? I want to try it on my ZS570KL too, but is there a persist.img for this phone?
Click to expand...
Click to collapse
Depending on your OS version yes, contact me on Telegram @GuerrillaRadi0 (the last character is zero) maybe I can help you, after I fixed the problem I configured fingerprint security and the problem came back, so I tried to flash persist.img again and it didn't work, so I got the raw rom of the Oreo version I have; WW-15.0210.1810.73, which comes with its own ADB, and flashed from there, the same raw rom has the persist.img. After that all sensors worked again, so I configured fingerprint security again just to be sure, and again I lost all the sensors, but after deactivate fingerprint again everything worked fine, I guess I have some hardware issue related to fingerprint sensor, I guess it was because a technician opened the phone to replace screen and battery 2 months ago. I always used fingerprint so I need to go back to pattern.
Good luck
After some days without any issue the problem came back, I flashed persist.img twice and it worked, but about 3 days ago I can't solve this flashing persist.img, I tried wiping everything, downgrading to Nougat, then flashing Oreo, with TWRP and via flashtool, no solution, any other idea?? all sensors are not working.
Thanks in advance

Mi a1 touch issues

Hi,
I was on stock Pie firmware on mi a1. I tried to install twrp recovery in my device and somehow messed it up while flashing stock roms and all those things. Now my touch is not working properly. I can flash stock pie rom via fastboot method, but cannot go through setup process because my touch is a bizzare. I then tried to flash stock oreo and nougat firmwares and stuck in bootloop. I'm even tried booting into TWRP to see if anything would help, but the touch issue seems to affect twrp as well. Please help me out with this.
Thanks.
Do you fixed your problem? I don't know what happened but after I flashed the stock ROM the touch screen is useless. I already flashed everything in miflash and the screen is still broken... I don't know what to do, help pls
Hi!
I already fix a similar problem on my phone.
After a screen replacement, I had a touch-screen issue which was detecting the touches, but at a pseudo-random position.
The solution that worked for me was to flash the first stock nougat image released (September 2017 ), and then to upgrade to pie using the classical way through OTAs.
But you have to be very careful while doing this as you will encounter some kind of weird issues if you do this the wrong way, like lost IMEIs and some others that I don't remember.
You'll find some tutorial on how to downgrade from Pie to Oreo and then I don't remember well but I think you will be able to flash directly android one 7.1.2.
I hope this will solve your touchscreen issue (let me know if that worked for you or if you have any other problem occurring)

Categories

Resources