Well guys . This is my problem
I was using MOL 5.1.1 and life was perfect. So I decided to try something else and flashed Darklords. Becouse I was buggy I returned back using mybackup.
Problem:
1) charging from adapter(wall) not working
2) charging using PC goes perfect (really fast)
3) PC dont recognize phone so I cant use odin nor Kies to flash completely stock.
I tried a couple kernels and still the same
Any suggestions?
Thanks
Related
Yesterday I needed to take a picture and used my Galaxy S. for it. After that I connected my phone to my laptop USB port and got an unknown device error. Assuming it was a driver problem I re-installed them keeping the same error.
I also got telephony problems before, after some minutes calling the other side couldn't hear me anymore and I needed to put the call on wait and back to continue the call.
Both problems together made me decide to update my Darky 10.1 Extreme edition to the latest 10.2 Extreme edition. I took my sd card out and copied the darky 10.2 zip to it using my laptop. Put it back in and used Astro filemanager to copy it to the internal sd. Because I can't use the usb port this was the only way.
Rebooted to recovery and flashed 10.2. After reboot the screen stayed at the boot screen with green Darky text for half an hour without doing anything. No vibrate or anything. I did read some info about 10.2 before i downloaded it but missed the lagfix point. Tried to get into recovery and luckily that worked. Turned on the lagfix, did hear the computer voice 2 or 3 times and last time it said lagfix was enabled. Rebooted to recovery again, checked lagfix was on, also for next boot, and flashed 10.2 again. Same problem, hangs at bootscreen.
Turned lagfix off again and flashed the old 10.1 again. Same problem again, this time only bootscreen with white SG text and both button lights on. Nothing for the rest. Flashed back, after lagfix enabled, to 10.2 again without luck. Again bootscreen only.
Someone knows how to fix this? Because of the usb problem I can't use Odin. I did read somewhere now there might be a cable problem or a dirty usb connector on the phone. Checked the connector visually and can't see any dirt, I also keep it closed when not using it.It does load the battery also when connected to my laptop. At least it did when I first got the unknown device error.
1) USB Error
I am not sure you have Only installed the USB driver alone or Kies it self. Anyway, try this http://support.microsoft.com/kb/315265. Scandisk with delete currupted file on your disk drive and replace with default window file. You can reinstall your driver/Kies on your laptop after scandisk complete.
2) First, you must come from JVP or JVQ base rom. JVO and older rom have older bootloader. What you need to do is to flash JVP or JVQ stock rom with bootloader into your phone. Then, flash over Darky 10.2 over the phone. Take note that Darky still have many problem and it is not that stable yet. I've run it over a week and decided to dump it. The rom is too big at 215MB where else others rom only 195MB. The startup is too slow, take 5-10min after reboot the phone. The initial start up takes nearly 15min after flash.
from.insider said:
2) First, you must come from JVP or JVQ base rom. JVO and older rom have older bootloader. What you need to do is to flash JVP or JVQ stock rom with bootloader into your phone. Then, flash over Darky 10.2 over the phone. Take note that Darky still have many problem and it is not that stable yet. I've run it over a week and decided to dump it. The rom is too big at 215MB where else others rom only 195MB. The startup is too slow, take 5-10min after reboot the phone. The initial start up takes nearly 15min after flash.
Click to expand...
Click to collapse
If your boot takes so long, you doing something wrong
First boot, yes... it takes some time. But then, the animation isn't finished yet and I'm already good to go (after media bla bla bla)
@OoZic
For darkys rom... i had the same problem.
First flash Ficetos resurection 10.2, then make shure lagfix is ON (full lagfix - check in voodoo control app) and then flash 10.2 extreme edition
For details go to
http://www.darkyrom.com/community/index.php?threads/v10-2-final-what-are-you-waiting-for.4253/
I had the problem too
Thank you for your reply from.insider
Problem is the phone can only do bootscreen and recovery. The device isn't recognized in any way. Tried it on 2 computers (laptop/PC) with different multiboots (Win7 X64 and Vista X86 on both). Maybe that is because the OS isn't loaded and can't go to MTP?
Is there a way to copy something from external SD to internal SD within recovery menu? Because that way I can copy a JVP or JVQ image to internal. Now there are only the 10.1 and 10.2 zips from Darky.
FSCK didn't find any problems btw.
Thanks again.
Problem solved, my Galaxy is unbricked and working again. Very happy now
Can't post a link because of low post count but the answer is on post-87372 on Darky.com.
The USB problem also went away, but after using Titanium to put my backup back the problem was here again. something in my settings or a service is screwing something up with the mtp I think. Used Android Booster to kill some things and it works again. As soon as I know what exactly is screwing up my mtp I will let you all know.
OoZic said:
Problem solved, my Galaxyd and working again. Very happy now
Can't post a link because of low post count but the answer is on post-87372 on Darky.com.
The USB problem also went away, but after using Titanium to put my backup back the problem was here again. something in my settings or a service is screwing something up with the mtp I think. Used Android Booster to kill some things and it works again. As soon as I know what exactly is screwing up my mtp I will let you all know.
Click to expand...
Click to collapse
Can you copy and paste the the answer and post it here man, i cant find the post your talking about and my phone has the exact same problem.
Hello guys, I have the following problems with my galaxy s. For 2 days now I am having the problem that the phone while working fine, suddenly reboots and my baseband is gone. I am getting baseband unknown in status.
With no baseband working it constantly reboots every 2/3 minutes. Sometimes it fixes itself and I am having the baseband again. Sometimes not and I try to flash the software (CM9 or CM10), or just the modem. Also tried to copy the efs folder. Nothing seems to work though. I just have to be lucky that it fixes itself after a reboot.
Does anybody experience the same problems?
*** update
the problem seems to get fixed once you plug into the power line to charge it. do you think it is the battery?
Have you tried flashing everything from beginning again? So GB via Odin, CM9 twice, afterwards CM10 (or keep 9)?
Maybe it's due to the battery, don't know.My phone is now 2 years old and I already replaced the battery 6 months ago, lol
i would also recommend you flashing stock GB version via ODIN and start form there. i could always solve every problem by going back to GB.
if it's the battery you should try out another one if you can.
I have this problem too, the only way to get back to normal is to flash back samsung ROM, problem occurs with all cm10 versions !!
Did you solve it?
I will ask here,because I don`t want to open new thread for this.I have one SGS on repair but I can`t use usb because my pc can`t recognize the phone(unknown device).I have right drivers installed.There`s no recovery on the phone too,only download mode.If I wanna charge it,battery animation only starts and then restart.If I wanna turn it on,Samsung logo and then Devil kernel animation is shown and then phone restarts.Any idea? Thanks
zviki said:
Any idea? Thanks
Click to expand...
Click to collapse
Different solutions for USB connection problems and bootloops. look in My Android Solutions
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card
BlueEyes99 said:
Hello guys, I have the following problems with my galaxy s. For 2 days now I am having the problem that the phone while working fine, suddenly reboots and my baseband is gone. I am getting baseband unknown in status.
With no baseband working it constantly reboots every 2/3 minutes. Sometimes it fixes itself and I am having the baseband again. Sometimes not and I try to flash the software (CM9 or CM10), or just the modem. Also tried to copy the efs folder. Nothing seems to work though. I just have to be lucky that it fixes itself after a reboot.
Does anybody experience the same problems?
*** update
the problem seems to get fixed once you plug into the power line to charge it. do you think it is the battery?
Click to expand...
Click to collapse
If you are trying to copy your EFS folder and it does not work - are you using a micro-SD card in your phone. If you are then doing a simple backup will save your EFS as part of the backup and you can have it saved on your microSD card also known as your external sd
---------- Post added at 12:19 AM ---------- Previous post was at 12:13 AM ----------
zviki said:
I will ask here,because I don`t want to open new thread for this.I have one SGS on repair but I can`t use usb because my pc can`t recognize the phone(unknown device).I have right drivers installed.There`s no recovery on the phone too,only download mode.If I wanna charge it,battery animation only starts and then restart.If I wanna turn it on,Samsung logo and then Devil kernel animation is shown and then phone restarts.Any idea? Thanks
Click to expand...
Click to collapse
That happened to me early on when i started to install custom roms - I did a search on the web for Samsung drivers and installed that and have never had a problem since.
BlueEyes99 said:
*** update
the problem seems to get fixed once you plug into the power line to charge it. do you think it is the battery?
Click to expand...
Click to collapse
Do you know anyone with the same phone whose battery you could borrow just for testing (SGS or SGS Plus)? I had a battery related problem with constant reboots, BUT in my case the battery level dropped from 80 to under 5 and that caused the reboots. My battery had also swollen a bit.
Experienced same issues until I replaced the battery
Sent from my GT-I9000 using xda app-developers app
Charius said:
Do you know anyone with the same phone whose battery you could borrow just for testing (SGS or SGS Plus)? I had a battery related problem with constant reboots, BUT in my case the battery level dropped from 80 to under 5 and that caused the reboots. My battery had also swollen a bit.
Click to expand...
Click to collapse
You should be glad your phone didn't explode.
Hi
I am experiencing the same problem.. my battery is working properly and
Its giving good back up.. I don't know how to solve the issue.
Now i am using jelly bean by semaphone.. please give me some suggestions to
Resolve the issue.. n how can i install samsung drivers in hhe device
Thank you
i had this issue with my nexus had to flash it back to stock and now for some reason it only recognizes it as a camera and it will flash everything but the rom it flashes the gaps and apks i thought it might be a bad rom but it always says the same thing about md5 . im totally stumped on this it work perfect when it didnt recognize it as camera . i could really use some help big time on this issue
Try deleting and reinstalling the drivers in device manager with USB debugging enabled on your tablet....this was what fixed the issue for me.
Hy every one
Its first time to post in this lovely forum sorry for my noob english and i have big strange issues with my note 3
Its n900 international
Rom vn rom v13.1 right now
Rooted
The charge indicator not working but indeed its charging so i dont know my level of charging !!! Till i restart the phone and charging led and indicator worked but my phone get very warm on idle with lag and slowing of the phone and the antutu score less than 22k but normally should be 40k..to fix it i should restart my phone again to get my phone work normaly but without any charging indicator.
In both situation i cant connect to pc through usb in usb2 and usb3 with kies nor mass storage or any thing except when i put it in download mode and using odin
I use many cable.diffrent pc. Diffrent charger with no effect
The problem start before update to kitkat since june with 4.3 suddenly i tried factory rest , wipe not effect
After ota update to kitkat no change. Last week i did root and install vn rom 13.1 still problem found .
I am really confused its hardware or software fault what to do ??
Thanks
Sent from my SM-N900 using XDA Free mobile app
I am having the same problem....I also installed vn kitkat v13.1...it solved the problem with pc connection...but when I restored to my stock using the backup the problem came back....I am thinking of flashing the stock as resetted my knox to 0 again...have u found any fix for the issue....it would be really helpful cause I need to backup some data on pc as I flash....please reply soon....
Hey, I have a few issues after flashing the stock ROM of the Nothing phone 1. First of all, I can't wirelessly charge the phone (but reverse wireless charging works.) I know my pad is QI-Certified and does support 15 watts. I also tried it with a different one, that worked in the past. Second, I can't use the OfflineOtaUpgrade to install Nothing OS 1.5. As mentioned, I had to flash the stock firmware/ROM since the phone somehow got stuck in fastboot mode. I'm having these issues since I reinstalled it, before that everything worked fine. Would be nice if someone could help me.