I want to root my n910c mm 6.0.1
Is there any way...
Or i hv to flash kernel first thn twrp thn cf root?
Help needed.....thnx in advance
Flash TWRP. Flash SuperSU zip from there.
Can i flash cf-auto root?
Before reading this thread, I did same as per the suggestion of "Ithehappy", above; and my N910C MM6.0.1 just stayed on opening stage, the SAMSUNG logo was slowly flashing during awhile....
Good that I had a fresh backup image, so I directly restored it...
Anyone can advise the right process, as I beleive this is the simplest ans safest way...
Thx
Related
Hi guys.. I need help to root galaxy s5 G900H lollipop . I tried CF auto root flashed via odin , But it ends with bootloops. Again i flashed stock rom for bootloops. I also tried philz_touch_6.48.4-k3gxx.tar.md5 flashing this file and unable to boot to recovery.. I need help guys . My knox is tripped and i Need Root
update your odin version with 3.10.6 and search for CF-Auto-Root-k3g-k3gxx-smg900h.tar.. this should work fine... as it worked for me. and flash your custom recovery with the same odin 3.10.6
Hey guys i followed this youtube guide for rooting 5.1.1 using TWRP Method https://www.youtube.com/watch?v=qpsGX_Xoxcg
i downloaded all the files but the firmware (not listen i have n910W8 = telus)
I have odin, supersu, TWRP (which n910w8 is listed) and samsung drivers.
I moved superSU and the TWRP file to root directory of note 4 5.1.1. rebooted into download mode, saw the blue indicator on odin and loaded the file. Rebooted holding volume up this time and tried to load the kernal but it doesnt exist.
I think im confused the TWRP file is NOT the kernal? Where can I get a kernal for n910W8 (telus)
thanks in advance!!
So I found this
http://www.sammobile.com/firmwares/download/56498/N910W8VLU1COI4_N910W8OYA1COI4_TLS/
which is telus 5.1.1 Rom. ill move this to my root directory and load the 910W8 TWRP file in odin and flash? Ill give it a try now wish me luck lol
ok i followed a guide online and now my phone just keeps restarting. I think im in big trouble. Im able to load openrecovery-twrp-2.8.1.0-trltecan.img into odin and boot to TWRP but now i cant load kernels? looked so easy to do now im down a phone? any help is much appreciated thanks!!!
You need to odin (bell, rogers, telus) 5.1.1 then odin TWRP then twrp a custom kernel. Our 5.1.1 needs a custom kernel in order to work rooted. Or.....you can load a custom 5.1.1 rooted rom that is W8 compatible or any Tmobile rom such as Tekxodus which i am running.
ok so i loaded openrecovery-twrp-2.8.1.0-trltecan.img in AP (for my device) copied the custom rom
" cm-12.1-20150423-NIGHTLY-trltetmo" which was suppose to work with my 910w8 (910T) used recovery to flash it and also supersu it flashed OK... I restart and i see a little blue guy and its stuck optimizing apps. Suck in restart loop.
what did i do wrong? try a different kernel ?
thanks in advance
EDIT 1
im trying the " Tekxodus" rom. this file is way larger whats going on with that. Is it the same procedure to flash it?
EDIT 2
Flashed to tekxodus rom optimizing apps... now its stuck System UI has stopped. and I cant do nothing. Any suggestions? ?? ?
EDIT 3
Do I need to flash a certain BootLoader along with the recovery for my device (BL and AP) ? , reboot in recovery and flash the custom rom ie "Tekxodus" ?
found this guide for 910C
http://www.ibtimes.co.uk/how-root-galaxy-note-4-n910c-android-5-1-1-lollipop-1518168 with these steps
"Step-1: Download the flashable root package and transfer it to the storage of the phone
Step-2: Download Android 5.0.1 bootloader package. Extract it using any extracting tool and you should find a folder containing Odin flashable tar package and Odin binaries"
so confused lol
All you have to do is Odin stock 5.1.1 rom (COI4 i believe) then Odin TWRP then flash Tekxodus V3.2. Let everything optimize and let it sit there for a good 10 mins after optimization. Ignore what its doing. It will just work. No need to flash anything else unless you want Xposed, then you flash that right after flashing Tek (do not boot in between)
any idea where to get a custom kernel for 910w8 5.1.1 to root stock rom?
Im running this rom (flashed using odin)
http://www.sammobile.com/firmwares/download/56498/N910W8VLU1COI4_N910W8OYA1COI4_TLS/
stock telus rom. I loaded this rom by clicking BL in odin and selecting it (along with my recovery for telus 910w8). This was the only was to get my phone back into working order.
______-
I loaded my recovery for telus into odin and went to download mode.
booted into TWRP
Flashed Tekxodus V3.2.
Optimized apps for about 10 minutes and it just restarted and optimized again and again.
One time it said System UI has stopped and I was hooped.
not sure where I went wrong?
thanks for the response btw I really want to get this going cheers
equlizer said:
You need to odin (bell, rogers, telus) 5.1.1 then odin TWRP then twrp a custom kernel. Our 5.1.1 needs a custom kernel in order to work rooted. Or.....you can load a custom 5.1.1 rooted rom that is W8 compatible or any Tmobile rom such as Tekxodus which i am running.
Click to expand...
Click to collapse
can i use any carrier software for the COI4? That's my only question. Thanks for helping!!
Hi all,
I want to install ROM by _alexndr on a new G900F. I want to keep KNOX 0x0, so I need root to flash this ROM using flashfire.
However, the device came with android 5 when I bought it, so towelroot does not work. If I understood correctly, I have to flash stock 4.4.2 firmware (where do I get it? which tool to use for flashing? Just flash, or other things to take care of?), then I can use towelroot and flash ROM by _alexndr with flashfire. Did I miss anything important?
Get the ROM and ODIN the flashing tool from sammobile .com firmware section
Instructions under the download (Free account might be needed to download the ROM)
Can I just flash the old 4.4.2 firmware over the current 5.0 firmware, or do I have to consider something else?
I've flashed KK over LP before, and first boot didn't boot, flashed it again the same way, and it booted fine
Might need to factory reset before/after flashing if you have problems
I have the PF4 Unlocked bootloader. But I want to either do a Stock image ({PLEASE CORRECT ME IF IM WRONG}i think it just puts the stock firmware on, but keeps Bootloader & Custom Recovery the same.) If im right, please direct me to where the SM-G900V stock image is and, what its called. Or suggest another way to Upgrade to PF4 6.0.1
Just so you see the whole picture, I want to get my bootloader to be unlocked/developer mode, and I want to be on PF4 so I can get SuperSU Systemless root.
Thank You SOOOO much for helping me
Im on BPB1 Android 5.0
Link to SuperSU Systemless root page: http://www.supersuroot.com/
It has stock images, but I don't know which one to use.
Can someone send me a download link for autoroot to J500 F and FN for 5.1.1 Lollipop. Because on Chainfire site there is for 6.0.1 and I cannot find to 5.1.1. :/ Thank you.
Edit:
Yes, for J500F too, because i forgot to add this in topic.
Try flashing supersu zip from their official site.
Flash TWRP recovery from Odin, then flash the zip.
I wouldn't recommend autoroot.
I do not want to do this because this is not my phone. Flashing TWRP and then supersu.zip will take too much time. I prefer this way, the autoroot.