Related
I'm getting this error when trying to flash lollipop roms. I can flash Kitkat roms fine as I'm currently running xdabbeb VS982.5 1.0.0 (G3 rom), but it won't let me flash any lollipop rom. I installed twrp via the autorec program which installs 2.7.0.0 then I updated twrp within twrp with the flashable zip.
Please help
Thank you
Anyone?
Seriously no one knows? What is everyone else using that is flashing the latest 5.0.2 roms?
What am I getting this error?
Please help
Possible Fix
I've also had this problem. The only way I can seem to fix it is to also download the .md5 along with the rom itself. Just make sure its in the same folder as the rom. Everytime I have that problem with TWRP this seems to fix it. Let me know if it works for you!
Edit: Also I forgot to mention, if one isn't available to download I can help with that.
Thanks for the suggestion. I'll give it a try. If there is no. Md5 what do I do then?
All you need to do if it comes to that is download an md5 checker on your computer. Just curious, what rom are you trying to flash?
I tried resurrection remix and liquid lollipop roms. I had no issues with the initial 5.0 lollipop roms so I'm not sure what changed with 5.0.2.
So the md5 checker generates the .Md5 then you just put that on the SD card with the rom?
Resurrection remix should have an md5 on the download page right below the rom itself.
derekmt95 said:
All you need to do if it comes to that is download an md5 checker on your computer. Just curious, what rom are you trying to flash?
Click to expand...
Click to collapse
Can you point me to the program to use on my computer? Do I just load the .zip file in the program to generate the .md5sum file then put both the zip and the .md5sum file on the sdcard before flashing?
Thanks
derekmt95 said:
I've also had this problem. The only way I can seem to fix it is to also download the .md5 along with the rom itself. Just make sure its in the same folder as the rom. Everytime I have that problem with TWRP this seems to fix it. Let me know if it works for you!
Edit: Also I forgot to mention, if one isn't available to download I can help with that.
Click to expand...
Click to collapse
Nope, I downloaded the md5 file along with the zip and I'm still getting the same "error executing updater binary in zip".
Any other suggestion? How is no one else having this same issue? I'm using the latest version of TWRP 2.8.3.1 probably like most people. I don't understand.
xxNiradxx said:
Nope, I downloaded the md5 file along with the zip and I'm still getting the same "error executing updater binary in zip".
Any other suggestion? How is no one else having this same issue? I'm using the latest version of TWRP 2.8.3.1 probably like most people. I don't understand.
Click to expand...
Click to collapse
Try to reflash the TWRP.. or maybe is something wrong with the zip file
Use the TWRP compiled by blastagator
Nope, still getting same error with latest twrp.
Finally got it working. I downgraded TWRP to 2.7.0.0 and the lollipop roms are flashing fine now.
Thanks everyone for your help.
xxNiradxx said:
Finally got it working. I downgraded TWRP to 2.7.0.0 and the lollipop roms are flashing fine now.
Thanks everyone for your help.
Click to expand...
Click to collapse
How did you downgrade because I cannot seem to find a way to do it.
TheAnonymousButler said:
How did you downgrade because I cannot seem to find a way to do it.
Click to expand...
Click to collapse
just run AutoRec again and you are all set.
LG G2 cm-11 M12 : Error executing updater binary in zip (TWRP)
kashif87 said:
just run AutoRec again and you are all set.
Click to expand...
Click to collapse
Hi, I am having the same problem. Actually my LG G2 was stuck in boot loop with secure boot error. I used SRK tool to flash the partition files as well as TWRP recovery 2.8.6.1. I have wiped everything and there is no OS installed. I am stuck in TWRP recovery screen [cannot downgrade /upgrade]. I am using and OTG cable to flash the cm-11 custom ROM but it is giving me the same error. Can anyone help ?? It has been 10 days I am trying and my phone is dying please help...
Thanks in advance...
before flash 5.1.1 aosp lollipop rom u must to flash first lollipop bootstack
Hi,
I am assuming the reply was for me. Actually I am not installing lollipop. I am going for kitkat but nothing is working now. I have tried cm-10.2, cm-11 M12, cm-11 M7 but all are showing "error executing updater binary in zip". Please if someone can help me out....
Thanks is advance....
@[email protected] i think kk aosp room need jb bootleader
Hello everyone,
I am running a D802 on stock Lollipop and installed TWRP 2.8.6.0 via AutoRec. Now I booted into recovery, wiped System and Cache and got the Error message when installing CrDroid (Marshmallow 6.0.1). Now I tried installing TWRP 3.0.2.0, which succeeded and then downloaded the twrp 2.7.0.0 zip to try that as the ROM still wouldnt install. But it wont install the older TWRP. So I am asking for help to either
1) Install TWRP 2.7.0.0
or
2) Delete the getprop lines from updater-script (after I removed them I get an error 6 so i probably removed too much?)
Thank you in advance
(Guide for Error 7: http://forum.xda-developers.com/showthread.php?t=2522762)
EDIT: Someone said installing another Kernel might allow installation of the ROMs. Which Kernel could work for my phone?
EDIT 2: When flashing TWRP 2.7.0.0 it says "assert failed: run_program("/tmp/loki.sh")==0". So what exactly am I missing on my phone? Is Loki the MM Bootloader?
EDIT 3: Could it be that the build.prop was deleted when I wiped system? Would be weird if that was the cause, but I simply dont know..
Edit: Booted in Downloa Mode and flashed v30D KDZ with the 2014 LG Flashtool. Works with Stock ROM for now
Couple days back, I factory reset my phone and when I went to upgrade it back to Lollipop it got stuck on my splash screen and never came out of it. While I do have TWRP installed, I didn't have the foresight to do a backup before upgrading and have tried flashing both cm-12.1.-20160627 and cm-13.0-20160723 both for the SM-G360H model.
Each time I attempt though it errors out with:
This package is for device: SM-G360H,SM-G360HU,core33g,core33gdd,core33gdx; this device is coreprimelte.
Updater process ended with ERROR: 7
Error installing zip file '/external_sd/Download/*whichever zip file*'
I'm 99% sure my phone is SM-G360H because I checked before installing TWRP roughly a month back but it's been a long week and I very well have missed something important in my haste to get my phone up and running again.
Any help or links are really appreciated.
xattle said:
Couple days back, I factory reset my phone and when I went to upgrade it back to Lollipop it got stuck on my splash screen and never came out of it. While I do have TWRP installed, I didn't have the foresight to do a backup before upgrading and have tried flashing both cm-12.1.-20160627 and cm-13.0-20160723 both for the SM-G360H model.
Each time I attempt though it errors out with:
This package is for device: SM-G360H,SM-G360HU,core33g,core33gdd,core33gdx; this device is coreprimelte.
Updater process ended with ERROR: 7
Error installing zip file '/external_sd/Download/*whichever zip file*'
I'm 99% sure my phone is SM-G360H because I checked before installing TWRP roughly a month back but it's been a long week and I very well have missed something important in my haste to get my phone up and running again.
Any help or links are really appreciated.
Click to expand...
Click to collapse
Dude u should make sure that ur device is 100% sm g360h
Because wrong rom can mess up ur phone
SM G360H dont have 4g .check if it is like that in ur mobile network. You can also compare other diff too
If u are sure its not lte
Then change ro.product.device and ro.build.product to sm g360h/core33g in ur buildprop using es fileexplorer and flash the rom
I had the same problem before here how i fixed it ..i installed stock rom usin odin then i installed cm11 first then cm13... ..i counldn't install cm12 or cm13 directly from stock rom too without getting the error 7 . just make sure to install cm 11 first ...i know it does not make sense but that how i fixed now im using cm13
---------- Post added at 04:04 PM ---------- Previous post was at 04:00 PM ----------
I forget ..just make sure that you have a clean download of the rom so the zip file is not corrupted.
try with CWM - not TWRP a was happy without "error 7"
So i was flashing Hydrogen Os v2.5 through twrp and since 20 mins the .zip file did not flash so i switched off the phone and when i tried re-installing h2os v2.5 it was again taking longer to flash so i turned the phone off again and this time i installed oxygen os v3.1.0 ,for sometime the phone was in bootloop but when it booted there was no wifi, no network and i found that my phone had no imei number plus unknown baseband, unknown bluetooth also i don't have an efs backup can anyone help me restore my phone to normal once again?
point here.
phorcus said:
So i was flashing Hydrogen Os v2.5 through twrp and since 20 mins the .zip file did not flash so i switched off the phone and when i tried re-installing h2os v2.5 it was again taking longer to flash so i turned the phone off again and this time i installed oxygen os v3.1.0 ,for sometime the phone was in bootloop but when it booted there was no wifi, no network and i found that my phone had no imei number plus unknown baseband, unknown bluetooth also i don't have an efs backup can anyone help me restore my phone to normal once again?
Click to expand...
Click to collapse
Same happened with me phone doesn't boot... Can't install recovery...
Nothing works tried all possible ways like hard reset
what recovery are you guys using?
---------- Post added at 03:26 AM ---------- Previous post was at 03:24 AM ----------
This version works with TWRP 302.2, make sure you are using that.. DO NOT use stock recovery..
---------- Post added at 03:32 AM ---------- Previous post was at 03:26 AM ----------
The ideal way to flash h2os is, flash the rom, flash the debloater, dont flash gapps at all.. boot into the rom, the first boot takes a lot of time so dont worry as long as the phone is not rebooting again and again.. once it boots up go through the setup, dont use oneplus account, then install the google installer apk..
https://www.techmesto.com/install-hydrogen-os-google-apps-oneplus-2/
then follow the procedure written in this link to install gapps.. and you're done.. you can use h2os 2.5 now!
Reverting back to OOS 3.1, I have not tried myself.. Maybe, get into recovery (twrp) do a factory reset first after going into wipe, then go into advanced wipe, wipe everything EXCEPT internal storage.. then flash OOS 302 instead of OOS 3.1, and see if it working with all the connectivity. THIS PROCEDURE IS NOT TESTED BY ME!!
As far as I know, the current oxygen version does not support the latest modem.. So you have two options..
1) install HOS again and like the above method use as it is
2) install HOS again to regain the networks(don't install gApps) and then using latest twrp, do a clean install of cm14.1 official.. But cm14.1 official with the latest modem is highly unstable if you use the mobile network..
My recommendation is to stick to the beta version of HOS for a few days and continue using it if you like it or flash cm14.1 once a stable build supporting the newer modem comes.. And when the updated oxygen OS comes in this or the next month, you can install it!
zipalign said:
point here.
Click to expand...
Click to collapse
thank you for your help so i was on mokee 7.1 when i flashed only this hydrogen modem v1.1 and when i booted i did not find any volte option, so i went back to latest twrp recovery and tried flashing h2os v2.5 but since 20 minutes i was seeing this ( https://2.bp.blogspot.com/-s77sPKpb...600/Screenshot_1970-01-01-06-55-47%5B1%5D.png ) so i switched off my phone midway and then i installed oxygen os v3.1.0 although it got into a boot loop but when it booted there was no wifi, no imei no, no baseband and many more and when i tried installing mokee or cm14.1 again although they got flashed but when i booted my device i saw oneplus logo and for a few seconds i also saw cm logo and the device continuously kept rebooting in a loop also i am only able to flash oxygen os v3.1.0 that too with no wifi, no imei etc. whereas cm14.1 and mokee wouldnt even boot but they do get flashed and h2os wouldnt even flash , please help :crying:
shravansp24 said:
As far as I know, the current oxygen version does not support the latest modem.. So you have two options..
1) install HOS again and like the above method use as it is
2) install HOS again to regain the networks(don't install gApps) and then using latest twrp, do a clean install of cm14.1 official.. But cm14.1 official with the latest modem is highly unstable if you use the mobile network..
My recommendation is to stick to the beta version of HOS for a few days and continue using it if you like it or flash cm14.1 once a stable build supporting the newer modem comes.. And when the updated oxygen OS comes in this or the next month, you can install it!
Click to expand...
Click to collapse
thanks for writing out, but i am unable to flash H2OS it is taking forever to install, it just says " patching system image unconditionally " i tried installing it through latest twrp and i tried hybrid recovery too
Rohandd said:
what recovery are you guys using?
---------- Post added at 03:26 AM ---------- Previous post was at 03:24 AM ----------
This version works with TWRP 302.2, make sure you are using that.. DO NOT use stock recovery..
---------- Post added at 03:32 AM ---------- Previous post was at 03:26 AM ----------
The ideal way to flash h2os is, flash the rom, flash the debloater, dont flash gapps at all.. boot into the rom, the first boot takes a lot of time so dont worry as long as the phone is not rebooting again and again.. once it boots up go through the setup, dont use oneplus account, then install the google installer apk..
https://www.techmesto.com/install-hydrogen-os-google-apps-oneplus-2/
then follow the procedure written in this link to install gapps.. and you're done.. you can use h2os 2.5 now!
Reverting back to OOS 3.1, I have not tried myself.. Maybe, get into recovery (twrp) do a factory reset first after going into wipe, then go into advanced wipe, wipe everything EXCEPT internal storage.. then flash OOS 302 instead of OOS 3.1, and see if it working with all the connectivity. THIS PROCEDURE IS NOT TESTED BY ME!!
Click to expand...
Click to collapse
i am using twrp-3.0.2-2-oneplus2.img but h2os takes forever to install, but i did flash h2os v2.5's modem v1.1 before flashing h2os v2.5.
i am also seeing this message in twrp " Failed to mount /system (invalid argument) " please help guys
Flashing h2os does take more time than usually flashing other roms.. maybe 10 mins or so.. but not 20-25 mins.. and ideally 302.2 should work with h2os without any issues.. I am using that right now.. i can boot into recovery and everything.. I'm not really sure what is the problem here now..
---------- Post added at 05:01 AM ---------- Previous post was at 05:00 AM ----------
shravansp24 said:
As far as I know, the current oxygen version does not support the latest modem.. So you have two options..
1) install HOS again and like the above method use as it is
2) install HOS again to regain the networks(don't install gApps) and then using latest twrp, do a clean install of cm14.1 official.. But cm14.1 official with the latest modem is highly unstable if you use the mobile network..
My recommendation is to stick to the beta version of HOS for a few days and continue using it if you like it or flash cm14.1 once a stable build supporting the newer modem comes.. And when the updated oxygen OS comes in this or the next month, you can install it!
Click to expand...
Click to collapse
I did return to cm14.1 by seraph after flashing h2os.. and i did not experience any random reboots with mobile data on 4g.. im using vodafone and idea..
Rohandd said:
Flashing h2os does take more time than usually flashing other roms.. maybe 10 mins or so.. but not 20-25 mins.. and ideally 302.2 should work with h2os without any issues.. I am using that right now.. i can boot into recovery and everything.. I'm not really sure what is the problem here now..
---------- Post added at 05:01 AM ---------- Previous post was at 05:00 AM ----------
I did return to cm14.1 by seraph after flashing h2os.. and i did not experience any random reboots with mobile data on 4g.. im using vodafone and idea..
Click to expand...
Click to collapse
I didnt try the seraph build.. Will try it! Thank you
phorcus said:
thanks for writing out, but i am unable to flash H2OS it is taking forever to install, it just says " patching system image unconditionally " i tried installing it through latest twrp and i tried hybrid recovery too
Click to expand...
Click to collapse
Yeah itll show that message and will last for 5-10mins.. Hydrogen is very slow to install.. If it lasts longer, try flashing the recovery again and trying it..! Or directly flash cm14.1 to see if its booting
Rohandd said:
Flashing h2os does take more time than usually flashing other roms.. maybe 10 mins or so.. but not 20-25 mins.. and ideally 302.2 should work with h2os without any issues.. I am using that right now.. i can boot into recovery and everything.. I'm not really sure what is the problem here now..
---------- Post added at 05:01 AM ---------- Previous post was at 05:00 AM ----------
I did return to cm14.1 by seraph after flashing h2os.. and i did not experience any random reboots with mobile data on 4g.. im using vodafone and idea..
Click to expand...
Click to collapse
can you please check this screenshot ( https://2.bp.blogspot.com/-s77sPKpb...600/Screenshot_1970-01-01-06-55-47%5B1%5D.png )
shravansp24 said:
I didnt try the seraph build.. Will try it! Thank you
Yeah itll show that message and will last for 5-10mins.. Hydrogen is very slow to install.. If it lasts longer, try flashing the recovery again and trying it..! Or directly flash cm14.1 to see if its booting
Click to expand...
Click to collapse
i reflashed the recovery and installed cm14.1 but then the device gets into boot loop,what's the problem here?
phorcus said:
i reflashed the recovery and installed cm14.1 but then the device gets into boot loop,what's the problem here?
Click to expand...
Click to collapse
Even i got into a bootloop after flashing RR or cm14.1.. Dont know the exact issue..
But installing the new h2os, booting it and then clean flashing cm14.1 solved the bootloop issue..!
shravansp24 said:
Even i got into a bootloop after flashing RR or cm14.1.. Dont know the exact issue..
But installing the new h2os, booting it and then clean flashing cm14.1 solved the bootloop issue..!
Click to expand...
Click to collapse
can you tell me the steps you followed to install h2os? cause when i am installing it, it takes forever to install like i waited for almost 20 mins before giving up, or should i wait more?
and did you get the same message as i got like " failed to mount /dev/block/bootdevice........and so on..... device or resource busy "
check the screenshot here ( https://2.bp.blogspot.com/-s77sPKpb...600/Screenshot_1970-01-01-06-55-47%5B1%5D.png )
phorcus said:
can you tell me the steps you followed to install h2os? cause when i am installing it, it takes forever to install like i waited for almost 20 mins before giving up, or should i wait more?
and did you get the same message as i got like " failed to mount /dev/block/bootdevice........and so on..... device or resource busy "
check the screenshot here ( https://2.bp.blogspot.com/-s77sPKpb...600/Screenshot_1970-01-01-06-55-47%5B1%5D.png )
Click to expand...
Click to collapse
1) Got into recovery
2) wipe-advanced wipe-everything except internal storage
3) install-HOS rom
(took around 5 minutes)
4) boot rom and finish initial setup
5) Got into recovery
6) wipe-advanced wipe-everything except internal storage
7) install-cm14.1 rom + gapps
8) boot
Maybe your rom is corrupt, try redownloading and im using latest twrp
shravansp24 said:
1) Got into recovery
2) wipe-advanced wipe-everything except internal storage
3) install-HOS rom
(took around 5 minutes)
4) boot rom and finish initial setup
5) Got into recovery
6) wipe-advanced wipe-everything except internal storage
7) install-cm14.1 rom + gapps
8) boot
Maybe your rom is corrupt, try redownloading and im using latest twrp
Click to expand...
Click to collapse
Thank a lot Bro that worked like a charm the downloaded file was corrupt but i got only one network and i am still on h2os, did you get both networks on cm 14.1?
phorcus said:
Thank a lot Bro that worked like a charm the downloaded file was corrupt but i got only one network and i am still on h2os, did you get both networks on cm 14.1?
Click to expand...
Click to collapse
I got both networks to work in cm14.1 but theyre extremely unstable.. I have my phone in flight mode most of the time to avoid reboots.. Wifi works fine.. The moment you activate the sim, it depends on your luck then.. Mine worked 10mins, sometimes 15, then reboots, again 5-10mins and again reboot(tried official as well as seraph's)
shravansp24 said:
I got both networks to work in cm14.1 but theyre extremely unstable.. I have my phone in flight mode most of the time to avoid reboots.. Wifi works fine.. The moment you activate the sim, it depends on your luck then.. Mine worked 10mins, sometimes 15, then reboots, again 5-10mins and again reboot(tried official as well as seraph's)
Click to expand...
Click to collapse
everything is back to normal on my phone, actually i visited the service center today and they told me that my phone is dead and that i would need to pay 17k to change the motherboard :laugh:
problem here is that H2OS 2.5 messed up all our modems, and who has not made OOS EFS backup via terminal is in trouble now.
when problem popped up in all forums [XDA, and OnePlus one mainly] there have been proposed several solutions, like flashing H2OS modem .zip via recovery, after installing OOS.
so now many users have different scenarios to approach, and a working allwide solution seems not to be found 'til now.
personally I have official TWRP 3.0.2-2 and all my flashings have been made with it.
started from OOS 3.1.0 I had on my phone in the last week, 100% working, then flashed H2OS 2.5. seen the new ROM, decided to get back to something more familiar, so I wiped all and flashed latest nightly of CM13. it was working like a charm, but I had bluetooth issues with my xiaomi mi band [like I always had with OP2 and CM13], so I decided to flash back OOS 3.1.0 wiping data.
OOS 3.1.0 booted up, but without connectivity.
then I realized my modems have been messed up, and started looking for a solution.
the only one I'd try is to fastboot flash OOS 3.0.2 .zip [kindly uploaded by Spannaa], and see if my phone starts working again like it should.
'til now, I will stay with H2OS 2.5 which works perfectly. but when I have time, I'll empty my phone backupping all my stuff [fastboot flashing the .zip mentioned above will wipe userdata too, so I'd lose all my stuff] and try the fastboot thing [I already did it a few months ago, no issues at all].
for those who are in big trouble, that cannot flash anything from recovery, I'd suggest to try to fastoboot flash OOS 3.0.2 with the .zip linked above.
if this solution still doesn't come to an happy ending, then you have to try with the unbrick tool from Qualcomm and see what will happen.
the most important thing is and always will be: don't do anything until you are not aware of what you're actually doing to your phone.
Hi all
I have a Smasung Galaxy note 3 (sm-n9005 htle)
I allready rooted it and installed the TWRP 3.0.2-0. That worked fine.
Now i tried to install some custom rom... it doesent work... it shows me the error 7 ...
so i googled for this error. and found a fix.. so i deleted the first lines in the updater-script... after that i tried it again. But it ditent work. It fails with the massage: could not found the binary file.
I wiped and formated the Smartphone as well.
I spend allready the whole day to install any custom rom...
Im really sad about this... maybe someone can help me.
And sorry for my bad english.
Did you confirm the phone's model # in download before flashing TWRP?
audit13 said:
Did you confirm the phone's model # in download before flashing TWRP?
Click to expand...
Click to collapse
Do you mean, that i downloaded the TWRP for my device model? Yes i did
Otherwise what do you mean?
Before flashing anything, especially if I got the phone used, I boot the phone into download just to confirm that the model # matches the label under the battery.
Only after confirming the model # in download do I start flashing files to the phone.
Does the error 7 happen with all custom ROMs?
audit13 said:
Before flashing anything, especially if I got the phone used, I boot the phone into download just to confirm that the model # matches the label under the battery.
Only after confirming the model # in download do I start flashing files to the phone.
Does the error 7 happen with all custom ROMs?
Click to expand...
Click to collapse
The Modelnumber in the downloadmode and the number under the battery are the same.
Yes i tried maybe five custom roms.
Fail is usually user fails to read instructions .
Error one .
I allready rooted it and installed the TWRP 3.0.2-0. That worked fine.
Now i tried to install some custom rom... it doesent work... it shows me the error 7 ...
Aroma installer does not work and thats why instructions tell you to use the older TWRP .
Instructions .
>>>Get a good recovery. TWRP recovery recommended, 2.8.7.0. Newer versions are not supported
>>>TWRP recovery recommended, 2.8.7.0. Newer versions are not supported
JJEgan said:
Fail is usually user fails to read instructions .
Error one .
I allready rooted it and installed the TWRP 3.0.2-0. That worked fine.
Now i tried to install some custom rom... it doesent work... it shows me the error 7 ...
Aroma installer does not work and thats why instructions tell you to use the older TWRP .
Instructions .
>>>Get a good recovery. TWRP recovery recommended, 2.8.7.0. Newer versions are not supported
>>>TWRP recovery recommended, 2.8.7.0. Newer versions are not supported
Click to expand...
Click to collapse
Thanks for it.
I tried now the TWRP 2.8.7.0. For my device there are two versions. The twrp-2.8.7.0-hlte-4.3.img.tar and twrp-2.8.7.0-hlte-4.4.img.tar.
First i tried now the twrp-2.8.7.0-hlte-4.4.img.tar but still gives me an error :
Updating partition deteils...
... done
Full SELinux support is present.
MTP Enabled
Installing '/external_sd/cm-23.1-20161016-NIGHTLY-hlte.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
detected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system
Can't install this package on top of incompatible data.
Please try another package or run factory reset
E:Error executing updater binary in zip '/external_sd/cm-23.1-20161016-NIGHTY-hlte.zip'
Updating partition details...
...done
The other version of TWRP doesent work. It ends up in a reboot circle.
Try Philz Recovery .
That fails flash a clean stock rom
BUT FIRST
.Installing '/external_sd/cm-23.1-20161016-NIGHTLY-hlte.zip'
Can't install this package on top of incompatible data.
Please try another package <<<< or run factory reset >>>
---------- Post added at 11:57 AM ---------- Previous post was at 11:43 AM ----------
You would be best flashing stock rom through Odin and then if you have problems post exact details .
What rom flashed etc .
JJEgan said:
Try Philz Recovery .
That fails flash a clean stock rom
BUT FIRST
.Installing '/external_sd/cm-23.1-20161016-NIGHTLY-hlte.zip'
Can't install this package on top of incompatible data.
Please try another package <<<< or run factory reset >>>
---------- Post added at 11:57 AM ---------- Previous post was at 11:43 AM ----------
You would be best flashing stock rom through Odin and then if you have problems post exact details .
What rom flashed etc .
Click to expand...
Click to collapse
Hell Yeah!
Thanks a lot it finaly worked with Philz Recovery...
I wiped my phone several times before intsalling the rom... but with Philz Recovery it worked!
Thanks so much! Im really happy now... its not the first device with a custom rom... but the first with problems
Thanks thanks thanks
So Ive been trying to install multiple different pie roms and each one gives me error 7 during the install with twrp.
Ive updated twrp to the newest 3.2.3, I read that could be the issue.
I was using nolimits rom but due to no future updates I wanted to try something different.
Im sure its something simple, but I cannot seem to find any resources.
I even tried deleting the assert lines in the rom zip, still same error.
Im at a complete loss.
I just put nolimits back on it so I at least have a working phone.
Any info is appreciated
cblock said:
So Ive been trying to install multiple different pie roms and each one gives me error 7 during the install with twrp.
Ive updated twrp to the newest 3.2.3, I read that could be the issue.
I was using nolimits rom but due to no future updates I wanted to try something different.
Im sure its something simple, but I cannot seem to find any resources.
I even tried deleting the assert lines in the rom zip, still same error.
Im at a complete loss.
I just put nolimits back on it so I at least have a working phone.
Any info is appreciated
Click to expand...
Click to collapse
Please post your question only once https://forum.xda-developers.com/oneplus-5/help/updating-to-beta-22-t3879346/post78437012
Please answer some questions:
Which twrp (file name)?
Which xXx rom(file name)?
Decrypted or encrypted storage?
Which rom do you want to install (exact steps)?
Sorry for the double post, Ive been super frustrated with it.
Right now im running twrp 3.2.3.0 from the twrp website, I have tried codeworkx with no change.
I was trying multiple different roms, but for the sake of troubleshooting I was trying PixelExperience Cheeseburger 9.0
Most of the installs attempted have been through twrp so Im guessing decrypted.
And I was following the steps on the roms thread.
Factory wipe, delvik and data, then attempt the install.
cblock said:
Sorry for the double post, Ive been super frustrated with it.
Right now im running twrp 3.2.3.0 from the twrp website, I have tried codeworkx with no change.
I was trying multiple different roms, but for the sake of troubleshooting I was trying PixelExperience Cheeseburger 9.0
Most of the installs attempted have been through twrp so Im guessing decrypted.
And I was following the steps on the roms thread.
Factory wipe, delvik and data, then attempt the install.
Click to expand...
Click to collapse
Decrypted or encrypted storage? Which rom do you want to install now? Please use latest codeworkx recovery.
Which xXx rom exactly you're coming from(file name)?
Ok, I am coming from xXx_NoLimits_12.0_OP5_Oxygen_5.1.3_full and Id love to install OxygenOS Open Beta 22 Full
I can certainly install the codeworkx recovery if needed.
How can I tell if I am encrypted or not? Ive always just left things as default
Btw thanks for your help
cblock said:
Ok, I am coming from xXx_NoLimits_12.0_OP5_Oxygen_5.1.3_full and Id love to install OxygenOS Open Beta 22 Full
I can certainly install the codeworkx recovery if needed.
How can I tell if I am encrypted or not? Ive always just left things as default
Btw thanks for your help
Click to expand...
Click to collapse
Just follow instructions in first post for clean installation, make sure you made backups: https://forum.xda-developers.com/oneplus-5/how-to/official-oxygenos-beta-1-android-oreo-t3710003
Encryption means, you cannot access your internal storage without entering a pin when starting twrp or accessing the devices memory from outside.
So Ive followed the new install instructions from start to finish, and I cannot get past the OS flash.
Continuing to receive error 7.
Also receiving cannot mount /vendor as well
cblock said:
So Ive followed the new install instructions from start to finish, and I cannot get past the OS flash.
Continuing to receive error 7.
Also receiving cannot mount /vendor as well
Click to expand...
Click to collapse
For the error 7 make sure you downloaded the correct files, without download issues(maybe use checksum). have you removed compatibility.zip from the OB22 rom zip with either 7zip or total commander?
For vendor partition error try to mount vendor partition within twrp manually, if there's no checkbox, you need to flash what I suggested you here https://forum.xda-developers.com/oneplus-5/help/updating-to-beta-22-t3879346/post78437012
Earlier open betas created this vendor partion. You can try with OB13.
I have same problem, except I tried to fix it by flashing OB19 firmware and radio zip. Now when I boot the recovery I don't get "no vendor partition" and the bootloader unlocked error, but when I try to flash ANY rom (stable 5.1.4 /open beta 19 / PIE ), the system and vendor partitions would patcg unconditionally, but I get no OS error and the device reboots to recovery. Please help.
Ps: I have magisk and TWRP 3.2.3, and tried both clean flashing and dirty flashing. the unlocked bootloader error changed even after restoring the NAND backup. I had already removed the compatibility zip from the Pie zip. I tried blu spark and codeworx versions of twrp 3.2.3
yohouse2 said:
I have same problem, except I tried to fix it by flashing OB19 firmware and radio zip. Now when I boot the recovery I don't get "no vendor partition" and the bootloader unlocked error, but when I try to flash ANY rom (stable 5.1.4 /open beta 19 / PIE ), the system and vendor partitions would patcg unconditionally, but I get no OS error and the device reboots to recovery. Please help.
Ps: I have magisk and TWRP 3.2.3, and tried both clean flashing and dirty flashing. the unlocked bootloader error changed even after restoring the NAND backup. I had already removed the compatibility zip from the Pie zip. I tried blu spark and codeworx versions of twrp 3.2.3
Click to expand...
Click to collapse
Same as my answer above. Oneplus published every open beta as an update(even when it's a full rom) of the previous version hence when your last open beta was 10 and you want 22 you missed several in between(this was an example!).
FINALLY got it all to work.
Apparently I had issues with the firmware, had to go back and install codeworx 15.1 firmware, after that it seems to be good to go.
THANK YOU Strongst.
cblock said:
FINALLY got it all to work.
Apparently I had issues with the firmware, had to go back and install codeworx 15.1 firmware, after that it seems to be good to go.
THANK YOU Strongst.
Click to expand...
Click to collapse
How did you fix it? Can you explain what you mean by codeworx firmware? Could you provide link for file or guide?
This is the firmware from Codeworkx
https://sourceforge.net/projects/ch...firmware/firmware_5.1.7_oneplus5.zip/download.
You might have to go to an older version of twrp as well, just to get this installed.
strongst said:
Same as my answer above. Oneplus published every open beta as an update(even when it's a full rom) of the previous version hence when your last open beta was 10 and you want 22 you missed several in between(this was an example!).
Click to expand...
Click to collapse
I flashed open beta 13 & 19, and stable 5.1.4, all failed, what should I try?
---------- Post added at 07:40 PM ---------- Previous post was at 07:37 PM ----------
cblock said:
This is the firmware from Codeworkx
https://sourceforge.net/projects/ch...firmware/firmware_5.1.7_oneplus5.zip/download.
You might have to go to an older version of twrp as well, just to get this installed.
Click to expand...
Click to collapse
Which twrp version and developer? And after this can I flash Pie directly or should I install something before it? Did you dirty flash or did you use clean install? Sorry for too many questions but I tried it many times and am frustrated that it didn't work, but you fixing it gives me hope.
yohouse2 said:
I flashed open beta 13 & 19, and stable 5.1.4, all failed, what should I try?
Click to expand...
Click to collapse
What exactly means "failed"? Which error? Screenshot maybe? And from which oxygenOS you tried to update?
Also you need to flash magisk after flashing oxygenOS to make twrp sticky. Also a format of internal storage may be necessary to solve a boot problem.
The Unlocked Bootloader Warning screen is normal cause it's a warning when you unlock your bootloader, if it changed, it's due to changes made by oneplus some time ago, they changed it.
I was able to flash pie directly after updating the firmware.
twrp 3.2.3 should work
strongst said:
What exactly means "failed"? Which error? Screenshot maybe? And from which oxygenOS you tried to update?
Also you need to flash magisk after flashing oxygenOS to make twrp sticky. Also a format of internal storage may be necessary to solve a boot problem.
The Unlocked Bootloader Warning screen is normal cause it's a warning when you unlock your bootloader, if it changed, it's due to changes made by oneplus some time ago, they changed it.
Click to expand...
Click to collapse
By failed I mean that I would wipe the system partition for clean flash, install the ROM zip, which would run but say patching system and vendor partitions unconditionally, then when I want to reboot it says warning no OS. Continuing to reboot gets me automatically back to recovery.
I tried updating from xXx 5.1.2
yohouse2 said:
By failed I mean that I would wipe the system partition for clean flash, install the ROM zip, which would run but say patching system and vendor partitions unconditionally, then when I want to reboot it says warning no OS. Continuing to reboot gets me automatically back to recovery.
I tried updating from xXx 5.1.2
Click to expand...
Click to collapse
Did you try the firmware link I posted earlier?
cblock said:
Did you try the firmware link I posted earlier?
Click to expand...
Click to collapse
Will try in just a minute
---------- Post added at 09:23 PM ---------- Previous post was at 09:05 PM ----------
cblock said:
Did you try the firmware link I posted earlier?
Click to expand...
Click to collapse
still getting system patching unconditionally
Does it get stuck with an error?
Its suppose to say that