Have a note 5 with rooted stock 6.0.1. Smart switch opens on this device.
Have a note 3 with Resurrection Remix and Open Gapps installed - working fine. Smart switch will install on this device, but when ibtrybto open it, it flashes, closes, and I very briefly and see a toast that says ”signing key is mismatched between apk and firmware". It might say more than that, but that's what I can make out as the toast is only half a second or less.
And help to fix this?
Same Issue
I'm having the same issue. I'm trying to switch from a S5 to a S7e. I'm running CM13 13.0-20160412-Nightly-klte and GApps.
I was able to screenshot the error message.
Any help please? TIA
I'm quite sure that this won't work, because it needs a Samsung framework (Samsung rom).
Sent from my Note 3 running Phronesis Rom
Dejan Sathanas said:
I'm quite sure that this won't work, because it needs a Samsung framework (Samsung rom).
Sent from my Note 3 running Phronesis Rom
Click to expand...
Click to collapse
I thought about that, but it says Android, iPhone, Blackberry as the origin platform choices. I wold take that to mean that it can be any flavor of Android, whether pure, CM, HTC, Sony, or Huawai.
I can't think of a reason that it wouldn't work because of that.
Anyone found a fix to this yet? I'm running an S5 with a marshmallow resurrection remix and Gapps as well...
I'm having the same problem and the solution?
Android v.5 S4 I9500
Having same problem wth note 2
Any solutions?
[#
Any solutions?[/QUOTE]
Solution post in the forum for your NOTE 2
JJEgan said:
Solution post in the forum for your NOTE 2
Click to expand...
Click to collapse
no need to be so territorial, doesn't change the question if any solutions were identified for note 3 I can try them on note 2
Related
Hey guys i have note 3 n900 and i just installed VN rom with CWM
AND It work great but when i leave my phone for minutes or 1 minute it reboot and tell me thar upgrading android app so please would you give me guys answers
N900 is Exynos. I know support for CM and the likes is more unstable for that chip set. For example, I know random reboots is an issue for the Exynos version of the S4 on CM, perhaps it is on the Note 4 too.
Does the ROM thread mention RR issues? It could be a known bug.
Sent from my SM-N9005 using Tapatalk
I've been looking for custom roms with android 5.0 (lollipop) to flash on my Samsung Galaxy S4 SGH-i337m (jfltecan), however I can't find any. I know Cyanogen mod has cm12 for the jflte but not for jfltecan, can I still flash cm12 for jflte on my device or will it brick it? I used to have an s3 and I flashed carbon rom for d2att, edited some lines as to bypass status 7 and it worked fine. I was just wondering if I could do the same for my s4. Thanks!
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
Simax8 said:
I've been looking for custom roms with android 5.0 (lollipop) to flash on my Samsung Galaxy S4 SGH-i337m (jfltecan), however I can't find any. I know Cyanogen mod has cm12 for the jflte but not for jfltecan, can I still flash cm12 for jflte on my device or will it brick it? I used to have an s3 and I flashed carbon rom for d2att, edited some lines as to bypass status 7 and it worked fine. I was just wondering if I could do the same for my s4. Thanks!
Click to expand...
Click to collapse
I'm using the GPE ROM, its great!! Rogers i337m
Sent from my GT-I9505G using XDA Free mobile app
Simax8 said:
I've been looking for custom roms with android 5.0 (lollipop) to flash on my Samsung Galaxy S4 SGH-i337m (jfltecan), however I can't find any. I know Cyanogen mod has cm12 for the jflte but not for jfltecan, can I still flash cm12 for jflte on my device or will it brick it? I used to have an s3 and I flashed carbon rom for d2att, edited some lines as to bypass status 7 and it worked fine. I was just wondering if I could do the same for my s4. Thanks!
Click to expand...
Click to collapse
I'm on sgh-i337m with cm12 for the jflte and it's working great you need to change the name of device in updater script and all is working
sorry for my bad english
mugensiz said:
I'm on sgh-i337m with cm12 for the jflte and it's working great you need to change the name of device in updater script and all is working
sorry for my bad english
Click to expand...
Click to collapse
So you are not having any issues at all? I am considering doing this. Do you have a link to a guide you used?
I use the AntaresOne Rom from this Link http://forum.xda-developers.com/showthread.php?t=2557353 with my sgs4 (sgh-1337m) from Fido and the only issues are wifi is kinda wonky(doesn't always save network info, doesn't always connect, sometimes drops connexion, but it DOES work fine when connected) and battery sometimes drains really fast. NB that this last issue has been labelled "cosmetic" by someone who knows a great deal more than me about Android. I have NEVER had my phone run out of battery and shutdown., just some days at 6pm it says 25%, other days it reads 76%. Kinda random. About to test the "Danvdh's GPE Edition ROM" 5.0.1 Lollipop, will post when I can confirm working or not.
EchoeROM is a good one.
No service after flashing...
I was on SlimKat 4.4.4 which was good, but wanted to upgrade to Lollipop after seeing it on my Nexus 5 (which is now broken). I have a Bell SGH-I337M
I first tried the CM12 Optimized build, wouldn't ever get past the boot screen...
Tried GPE, and it installed and ran fine, but my service was cutting in and out (so basically useless)
Tried SlimLP, it also installed fine but I was having the same service problem as with GPE.
How are you guys installing these ROMS? The only info I could find to fix the problem involved modem/radio.. I tried flashing a LP modem with the ROM but it didn't work. And all the radio-related information was from 2011 so I didn't bother with it. Any help would be much appreciated, I've been messing with this for 2 days now and get seem to fix it
Hi all, I come from a Note 2 which I loved, but it was asking for a replacement..
So I have recently bought a Note 4 SnapDragon (N910F), It came with LoliPop 5.01,
LP5 is not that bad, but I haven't been able to make Xpose run on it..
So I decided to go back to KK4.4, tried several 4.x ROMs, but the only only one that has worked so far is the X-Note Rom.
(Some KK4.4 I tried to download just are not available anymore, or they didn't work on my phone,
others asked for Samsung activation, the download audio trick doesn't work)
Now (with KK4.4) Xposed is running flawlessly (same as on my old note2), but..
I'm having some issues with screen lag when writing or browsing, and a factory mode message every reboot
(tried the rm efs subdir, but it just isn't there)
I also have no clue how to make my home button wake up the phone (with LP5 it was doing it)..
So besides that, I would like you guys to recommend me a ROM for my note 4, that just works fine with Xposed.
I don't care if kk4.4 or lp5..
Thanks in advance,
ssuper2k said:
Hi all, I come from a Note 2 which I loved, but it was asking for a replacement..
So I have recently bought a Note 4 SnapDragon (N910F), It came with LoliPop 5.01,
LP5 is not that bad, but I haven't been able to make Xpose run on it..
So I decided to go back to KK4.4, tried several 4.x ROMs, but the only only one that has worked so far is the X-Note Rom.
(Some KK4.4 I tried to download just are not available anymore, or they didn't work on my phone,
others asked for Samsung activation, the download audio trick doesn't work)
Now (with KK4.4) Xposed is running flawlessly (same as on my old note2), but..
I'm having some issues with screen lag when writing or browsing, and a factory mode message every reboot
(tried the rm efs subdir, but it just isn't there)
I also have no clue how to make my home button wake up the phone (with LP5 it was doing it)..
So besides that, I would like you guys to recommend me a ROM for my note 4, that just works fine with Xposed.
I don't care if kk4.4 or lp5..
Thanks in advance,
Click to expand...
Click to collapse
I've had the same issue with every Rom both kitkat and lollipop (factory mode). It's your WiFi. If you reboot your phone with WiFi switched on this message appears. I think the problem is Knox related. The only solution ihr found is to wait twenty seconds after your pin code and then switch WiFi on.
ssuper2k said:
Hi all, I come from a Note 2 which I loved, but it was asking for a replacement..
So I have recently bought a Note 4 SnapDragon (N910F), It came with LoliPop 5.01,
LP5 is not that bad, but I haven't been able to make Xpose run on it..
So I decided to go back to KK4.4, tried several 4.x ROMs, but the only only one that has worked so far is the X-Note Rom.
(Some KK4.4 I tried to download just are not available anymore, or they didn't work on my phone,
others asked for Samsung activation, the download audio trick doesn't work)
Now (with KK4.4) Xposed is running flawlessly (same as on my old note2), but..
I'm having some issues with screen lag when writing or browsing, and a factory mode message every reboot
(tried the rm efs subdir, but it just isn't there)
I also have no clue how to make my home button wake up the phone (with LP5 it was doing it)..
So besides that, I would like you guys to recommend me a ROM for my note 4, that just works fine with Xposed.
I don't care if kk4.4 or lp5..
Thanks in advance,
Click to expand...
Click to collapse
Actually every deodexed Lollipop is xposed ready so you are free in your choice. All of available roms at Snapdragon section are good so it depends what you want. Some are more design oriented, other tend be as lightweight, as smooth as possible and so on. So it is difficult to suggest you something with just xposed compability Provide more info what is important for you or just look around in snapdragon development section
Dear Community,
I hope that this is the right place to post and any of you can help me.
My (aktual) Hardware/Software bits:
Galaxy Note 3 (SM-N9005)
Android: 5.1.1
Baseband-Version: N9005XXUGBOD3
Kernel-Version 3.4.108-f2fs-temasek-cm12.1-hlte-v1.25+
temaseksnappy #1
Temasek unofficial version V16.4
Build: LMY48J test-keys
Recovery: twrp 2.8.7.0-hlte-4.4
My actual problem is the following: My Note 3 by default had a 4.4.2 OFW on it, which I early upgraded to Lolipop 5.0.1. Everything works for the OFW 4.4.2 and 5.0.1 fine. As soon as I try to flash it with a CFW like CM11, CM12, CM12.1, CM12.1 (temaseksnappy), Gummy 4.4.4 I am losing the feature of auto rotation.
Of cource I did a clean flash, wiping DALVIK/CACHE/DATA and system, double time even one befor the flash, one after.
I also tried to put the battery, sim and sd out for few min before rebooting, while autorotation is manualy turned off.
Even a MODEM I flushed to fix this issue, but without success. Nothing helps but going back to OFW.
My last try was downgrading to the original 4.4.2, including baseband trieing from there to go to any CFW (CM11) as well as from OFW 4.4.2 -> OFW 5.0.1 -> CFW 5.1.1 (http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375)
There was also a post about a possible missing or broken lib in /system/lib which I replaced
Nothing helps (libGNU... something). This helped me alreay once in OFW after kicking out all the junk apps, but this is a different storry and not related anyhow.
Is there anybody out there who has the same problem or even better knows a solution?
My shot would be that:
1) CM has a problem with my particular hard-/software (Kernel, Baseband, Recovery, whatever) as I just tied CM or at least CM based CFWs.
PLEASE HELP.
Thank you very much in advance.
After about almost a year I cam back, giving again a try to CM, However I still have the same issue. Finally Anybody please!
Do you have the same issue with touchwiz 5.1.1 and 6.0.1?. Not the cm/aosp roms which aren't samsung based.
Sent from my SM-N920C
Rosli59564 said:
Do you have the same issue with touchwiz 5.1.1 and 6.0.1?. Not the cm/aosp roms which aren't samsung based.
Sent from my SM-N920C
Click to expand...
Click to collapse
Hello,
Thx for your reply. Right now I am on CM13 (temasek hlte v9.6)
http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375
This might should be specially compiled for sm-n9005 like mine.
Everything expect rotation works fine. However The accelleration is also working fine as I tested with "sensor test". Even the integrated camera App is rotating, however the rest is not.
In addition I downloaded "adaptive rotationfree", If I set it "stock Auto" nothing happens, but if I set it to "force auto" the rotation will work exacly once and then stops undtil I force it to portrait again.
What do you mean exactly with "touchwiz"? Is this jus a different kernel or a whole CFW?
As I wrote in the frist post I tried already a lot of CFW and ALL had this issue, but the OFW ;(
What shell I flush to get this working, which is not OFW?
BIG THX for YOUR HELP
Touchwizz is the firmware that comes with the stock Samsung firmware .
Also in custom Samsung based roms .
Hello,
thx for the tip with TouchWiz vs aosp. At the moment I am running "DarkLord N5 Release Candidate 2.12" which can get find here: http://forum.xda-developers.com/galaxy-note-3/development/rom-darklord-s6-port-alpha-t3083087
This Rom is TouchWiz Based and guess what ....
Autorotation works.
However I do not understand what the problem realy is and would prefer to run cm13 insteat. I mean even samsung devices got a accellerator within which works also fine with AOSP software, showing numbers moving while turning the phone. In addition for example on the post http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375 it is said that this is explicite for note 3 including the model n9005. So ...
Can anybody point me to the problem or even better to the fix?
Is there any chance CM would fix this?
Regards
Hi everybody,
I am new to the forum and new also to modifying android phones. I have a G900F and I wanted to try a few custom ROMs. I first installed Lineage 14.1 and everything went pretty smooth. After I wanted to try the official S5 MIUI7 v6.5.27 which I downloaded from the MIUI website. I wiped everything I could and installed the zip file with TWRP. There was no progress bar but it seemed to perform tasks. When finished, I rebooted but the phone is stuck on the Samsung logo without any progress. I tried many times and I always had the same issue. Could you please help me out with this? What can I do to fix the install issue? My phone is now working (installed the Super Lite by Vincom) but I would like to give MIUI a try. Any suggestions?
Thanks in advance
Miui 7 is based on android lollipop so you gotta flash lollipop bootloader and modem in order to get it working.
I would like to suggest you MIUI 8 by blackbuga, you can find the thread on Galaxy s5 development (snapdragon).
Sent from my SM-A720F using Tapatalk
Thanks! That was a quick reply!
I imagined that there was some issue of this kind. I was driven to v7 for its being an official release and stable. I saw that blackbuga's is beta and thought it was unstable. Well actually I wasn't relying on my skills, as I said I have been playing around with rom's for a week or so.
I'll give that a try