Database Users

Update : Possible to enable OEM Lock via ODIN or ADB ?

# Update ##
USB Debug works great
Possible to enable OEM Lock via ODIN or ADB ?
Everything is blocked by FRP Lock
######
Hi all,
Regarding s6 edge plus, I have a SM-G928I, is it possible to enable usb debugging without going into developer options ? A friend bought a second hand phone and its locked to an account unfortunately, and ODIN wont connect so ican root/reflash due to im assuming the usb debugging not being enabled.
I'm trying to save him some money by paying a repair shop >.< any tips?
Thanks

Anyone?
They sure are nice phones, the screen real estate vs my HTC one m9 is certainly noticeable

Did you install Samsung USB drivers and plugged phone in download mode? Can try also going to recovery and performing factory reset

Have installed samsung drivers, i can see the phone on the PC as a drive to load data to, but odin doesn't see it.
Factory reset seems to still have the account linked, a security feature of 5.1 i'm sure.
I'm getting a copy of the stock rom from sammobile
http://www.sammobile.com/firmwares/database/SM-G928I/
fingers crossed i can use this and it recognises it if i just replace the stock file

can it be forced via adb?

Okay so turns out i'm thinking of the wrong thing. USB Debug works., great can interface via ODIN and ADB.
Is it possible to enable "OEM Unlock' via command line interface of adb, or ODIN ? without access to the OS this is making life hard

Flash stock firmware. You need to flash stock firmware to access the OS and then enable OEM Unlock. There is no other way. You cannot charge it even without enabling it.
AFTER ROOTING MAKE SURE NOT TO DISABLE OEM UNLOCK.

I tried that, flashed stock firmware from sammob but it still wants the sellers Gmail account has he bought a brick?

Do a factory reset after ODIN flash. Flash TWRP, access recovery, format system, cache and data (including internal) and then check.

thanks, will update soon

Stock firmware flash works
Factory reset / cache clear works
Flashing TWRP fails due to FRP lock , due to the OEM Unlock not being enabled im assuming
"Custom Binary(RECOVERY) Blocked by FRP Lock"

I'm sorry but I think you are locked out of the phone.

It certainly seems that way. its always frustrating as a geek to be defeated

AK1149 said:
Do a factory reset after ODIN flash. Flash TWRP, access recovery, format system, cache and data (including internal) and then check.
Click to expand...
Click to collapse
The stupid practice
---------- Post added at 06:18 AM ---------- Previous post was at 06:11 AM ----------
ReaperZ said:
It certainly seems that way. its always frustrating as a geek to be defeated
Click to expand...
Click to collapse
If your mobile phone flash after the official firmware Able to enter the activation page
So you can contact me, I can help you remove OEM-FRP LOCK

china chenli said:
If your mobile phone flash after the official firmware Able to enter the activation page
So you can contact me, I can help you remove OEM-FRP LOCK
Click to expand...
Click to collapse
PM'd

so china chenli wants remote access to my PC ... no thanks !
any other clever ideas ?

ReaperZ said:
so china chenli wants remote access to my PC ... no thanks !
any other clever ideas ?
Click to expand...
Click to collapse
Hi, I've bought a phone with same condition.
Have you solved the problem?

Sure have, I obtained a file which allows you into the settings from the Google lock screen which allows you to enable OEM unlock. Due to the legalities though I'm not sure it's allowed to share this here though

can you please post/send me this file ? and instructions, i assume you flash it via Odin/adb

ReaperZ said:
Sure have, I obtained a file which allows you into the settings from the Google lock screen which allows you to enable OEM unlock. Due to the legalities though I'm not sure it's allowed to share this here though
Click to expand...
Click to collapse
Hi, I'm facing the same situation, can you send me the procedure and file you followed to enable the oem unlock?
regards
Giuseppe

S7 Edge - Custom Binary block by FRP Lock

Hi Guys,
I'm sure some of you may have heard about this error before.
Well, here's my sad sad story.
After trying to root my s7 edge,
Everything seems fine.
One day when i re-format my phone, and after which downloaded a few apps, there wasn't any issue at all
However when i restarted my phone, i saw the error msg : Custom Binary block by FRP Lock
And after which it can't boot up anymore.
Anyone of you guys able to help me ?
It'll be much appreciated!

Flash the stock firmware with ODIN
Envoyé de mon SM-G935F en utilisant Tapatalk

Thanks for the reply,
Sorry but I'm new. How do i do that?

pr0cupid said:
Thanks for the reply,
Sorry but I'm new. How do i do that?
Click to expand...
Click to collapse
What model? Country
Sent from my Blackberry Bold

Model : SM-G935FD
Country : Singapore

frp lock s7 edge
pr0cupid said:
Hi Guys,
I'm sure some of you may have heard about this error before.
Well, here's my sad sad story.
After trying to root my s7 edge,
Everything seems fine.
One day when i re-format my phone, and after which downloaded a few apps, there wasn't any issue at all
However when i restarted my phone, i saw the error msg : Custom Binary block by FRP Lock
And after which it can't boot up anymore.
Anyone of you guys able to help me ?
It'll be much appreciated!
Click to expand...
Click to collapse
i have same issue here, did you find any solutions ?

AFAIK when you factory reset your phone etc. if rooted you must remember to go back into Developer Options and re enable OEM Unlocking. This depends on the method you used to root, if you flashed dm-verity then you "May not" have this issue but cannot say for sure.
If it is already too late for you then I think you need to flash stock via Odin, plenty of threads out there on where to find the firmware (SamMobile) and how to do it. Even a quick google of the error gave me plenty of results...
One thing I have read is that you may have to keep trying to get your phone into download mode as the timing is much stricter with this error message.

I've the same problem with my g935x blocked on FRP when ii treid to root if any one can help .plz

https://drive.google.com/file/d/0B4sLrKlVs0CPQTBaamduLXdNYW8/view?usp=sharing
wHEN THE PHONE INICIALIZES PUT THIS FILE IN A OTG pendrivve install and do the reset by the menu of the phone.

djluisbento said:
https://drive.google.com/file/d/0B4sLrKlVs0CPQTBaamduLXdNYW8/view?usp=sharing
wHEN THE PHONE INICIALIZES PUT THIS FILE IN A OTG pendrivve install and do the reset by the menu of the phone.
Click to expand...
Click to collapse
@djluisbento This method seems to be interesting. But would you please clarify more about it. How to install the apk file on official recovery? Or it's enough to have the pendrive connected? And if yes, when this step should take place, after flashing the official ROM or when?
I'm stuck in a boot loop into recovery mode with dm-verity error, and unfortunately I have the FRP locked, so I can't install TWRP to flash the no-dm-verity.zip file to skip it.
Appreciate your suggestions.

I have the same issure. stock firmware wont install either. im just stuck on the FRP screen, cant even get into recovery

Same issue here, please help
Everything was fine with rooting and installing TWRP. after that did a restart/ attempt to goto twrp recovery, from then the s7 edge is stuck at "Custom Binary Blocked By FRP" and doesnt boot. please help!!

Have you do a Wipe then Format Data.
Then flash the no-verity-opt-encrypt zip in TWRP
Only if you want internal storage or data to work in TWRP:
Go to [Wipe] -> [Format Data] (not advanced wipe) -> type "yes".
WARNING: This will wipe your internal storage, disable encryption, and factory reset your phone!
Go to [Reboot] -> [Recovery].
If you want to be rooted with SuperSU:
Download the latest SuperSU by Chainfire.
Without exiting TWRP, transfer the SuperSU zip to your device over MTP* and flash it using [Install] in TWRP.
If you only want a bootable system partition or writable data in TWRP:
Download the latest dm-verity and force encryption disabler zip.
Without exiting TWRP, transfer the no-verity-opt-encrypt zip to your device over MTP* and flash it using [Install] in TWRP.
Click to expand...
Click to collapse
just quoting from the original thread by jcadduono.

Had that problem with a brand new phone, just wanted to get into download mode to see if the phone was tampered with and boom, flash screen with the red warning, flashed stock KSA (phone original CSC) , worked and phone was formatted, another surprise was faced, google did not accept my gmail account, had to shut down phone for 72 hours as read in my google search for people encountering same issue, once the 72 hours passed I was able to sign in and using my phone again.

maxkento said:
Have you do a Wipe then Format Data.
Then flash the no-verity-opt-encrypt zip in TWRP
just quoting from the original thread by jcadduono.
Click to expand...
Click to collapse
taiseer999 said:
Had that problem with a brand new phone, just wanted to get into download mode to see if the phone was tampered with and boom, flash screen with the red warning, flashed stock KSA (phone original CSC) , worked and phone was formatted, another surprise was faced, google did not accept my gmail account, had to shut down phone for 72 hours as read in my google search for people encountering same issue, once the 72 hours passed I was able to sign in and using my phone again.
Click to expand...
Click to collapse
Yes, flashed both Zips in recovery. I used my regular google account during the initial set up. If i wait for 72 hours, will the phone just boot back online just fine? Still, how do i make sure it wont goto the FRP lock again while trying to reboot or reboot to TWRP?

Solved,
Flashed with stock firmware, logged in with same google account, rooted with TWRP, installed Zubi's sound mod. Made sure to keep the 'OEM Unlock' stay turned on.

anoopgopalpt said:
Flashed with stock firmware, logged in with same google account, rooted with TWRP, installed Zubi's sound mod. Made sure to keep the 'OEM Unlock' stay turned on.
Click to expand...
Click to collapse
Helo
But U did this after 72 hours?

There are several methods depending on firmware version installed on your phone. Basically you have to enter in your phone, launch chrome, install an app which gives you the possibility to log into your google account from chrome and not set-up program.
I used successfully the Bluetooth method. Search for with google. You need a bluetooth headset and follow the steps described on youtube.
BTW. My phone was brand new and I flashed different official samsung firmware ( csc). I had to change google password in between and that resulted in FRP lock....
The wait time is 24 hours as is stated in google docs from site
Sent from my SM-G935F using XDA-Developers mobile app

Hello I have a related problem, opened a new thread, but my thread was closed, because my problem is related to this one, but more complicated. I have the same problem with FRP lock as described here, I can turn on the download mode but it wont be recognized by my computer. I tried different usb cables, drivers, even computers, it wont help. I cant flash it with odin, smartswitch, kies, no matter what I try. If I go to recovery mode it says `dm-verity verification failed...`and if I choose `apply update from ADB or SD card` it says `update from external storage disabled`. I dont know what to do anymore Its a new phone

FRP Block - no Dev Tools enabled
Hey guys,
you're my last resort, I've tried everything I happened to come across, to no avail.
First off, I did something incredibly stupid, don't even ask me why, as I have no idea what the heck drove me to do this in the first place.
Anyways, I was using the stock ROM on my S7 Edge, not tweaked or tinkered with besides the usual CF-Auto_Root. It never caused any trouble whatsoever. But for no reason at all this morning I decided to disable USB debuggin and OEM unlock. A short while later I rebooted my phone, which ended up in "Custom binary blocked by FRP Lock".
I gave a factory reset a try, but that obviously didn't change a thing. So I went to sammobile.com and downloaded the latest official stock ROM for my device and tried flashing it with Odin. Unfortnately Odin always fails with "Complete(Write) operation failed.", which I assume is because I messed with the settings in dev mode.
Next stop: ADB. I've never used that thing before, but I thought I should possibly be able to get it done following a simple guide. Unfortunately ADB won't even list my device when typing "adb devices". It's just an empty list.
So please guys, give me some tipps on how I can bring my phone back to life.

Sm-T580 FRP lock and custom binary blocked by frp. Cant flash twrp recovery.

So im trying to install twrp recovery but when i try to flash it thru odin, i get a Custom Binary (RECOVERY) blocked by FRP lock. I cant factory reset because it also disabled by FRP. I cant verify the tablet because i dont know the account information as the tablet was bought through craigslist. I have tried flashing a stock firmware version and that installed fine, but i still couldnt get past the verify screen. So thats when i decided to try and flash twrp but came into the binary error. I have been trying for the past two days to find a way around the verify identity and the frp lock. I cant enable oem unlock. I have tried rootjunky method but OTG flash wont pull up the file manager when plugged into the tablet. I cant use adb because i cant enable the developer settings because you guessed it i cant get past verify identity screen. Any help would be greatly appreciated.

Sounds like you need to find the Combination Firmware.

softasspoptart said:
So im trying to install twrp recovery but when i try to flash it thru odin, i get a Custom Binary (RECOVERY) blocked by FRP lock. I cant factory reset because it also disabled by FRP. I cant verify the tablet because i dont know the account information as the tablet was bought through craigslist. I have tried flashing a stock firmware version and that installed fine, but i still couldnt get past the verify screen. So thats when i decided to try and flash twrp but came into the binary error. I have been trying for the past two days to find a way around the verify identity and the frp lock. I cant enable oem unlock. I have tried rootjunky method but OTG flash wont pull up the file manager when plugged into the tablet. I cant use adb because i cant enable the developer settings because you guessed it i cant get past verify identity screen. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Read the post by Beut in this thread and then watch the video.

4929york said:
Read the post by Beut in this thread and then watch the video.
Click to expand...
Click to collapse
I already tried that method but didn't work. It's on android 7.0. I tried downgrading to sm-t580.. XAR firmware 6.1 and it worked but when it boots it goes straight to a black screen asking for a password. I tried the frp call method as well but it doesnt have wifi calling.

softasspoptart said:
I already tried that method but didn't work. It's on android 7.0. I tried downgrading to sm-t580.. XAR firmware 6.1 and it worked but when it boots it goes straight to a black screen asking for a password. I tried the frp call method as well but it doesnt have wifi calling.
Click to expand...
Click to collapse
It only works with certain versions of 6. The one ending is PL4 is the one you want. The trick is in adding the fake wifi network instead of connecting to your home network. Pay close attention to the beginning of the video.

lewmur said:
It only works with certain versions of 6. The one ending is PL4 is the one you want. The trick is in adding the fake wifi network instead of connecting to your home network. Pay close attention to the beginning of the video.
Click to expand...
Click to collapse
Okay thank you. I will try that again when I get home. And this works on version 7.0? The device is currently on 7.0 but when I tried the pl4 md5 it flashes it but when I boot up the device it just goes to a black screen and asks for a password. It doesn't start at the setup wizard

softasspoptart said:
Okay thank you. I will try that again when I get home. And this works on version 7.0? The device is currently on 7.0 but when I tried the pl4 md5 it flashes it but when I boot up the device it just goes to a black screen and asks for a password. It doesn't start at the setup wizard
Click to expand...
Click to collapse
You have to use Odin to install PL4. You can't flash it via TWRP. Also, make sure you wipe everything first.

lewmur said:
You have to use Odin to install PL4. You can't flash it via TWRP.
Click to expand...
Click to collapse
I know. I can't install twrp like I said. I've been using Odin to flash everything. But when I flashed the pl4 file and tablet goes to reboot. It doesn't load the setup wizard. Doesn't show the welcome screen and pick a language. It goes straight to a black screen and asks for a password. Doesn't ask for an email or anything.

softasspoptart said:
I know. I can't install twrp like I said. I've been using Odin to flash everything. But when I flashed the pl4 file and tablet goes to reboot. It doesn't load the setup wizard. Doesn't show the welcome screen and pick a language. It goes straight to a black screen and asks for a password. Doesn't ask for an email or anything.
Click to expand...
Click to collapse
Never heard of that. Can you boot from there into recovery and wipe again?

lewmur said:
Never heard of that. Can you boot from there into recovery and wipe again?
Click to expand...
Click to collapse
Yea but when I try to factory wipe it says mdm doesn't allow factory reset and reboots and takes me back to that same black screen. I can only wipe cache partition. I will post a picture of the screen when I get home.

softasspoptart said:
Yea but when I try to factory wipe it says mdm doesn't allow factory reset and reboots and takes me back to that same black screen. I can only wipe cache partition. I will post a picture of the screen when I get home.
Click to expand...
Click to collapse
I found this site. It is apparently an "MDM lock" and not FRP.

lewmur said:
I found this site. It is apparently an "MDM lock" and not FRP.
Click to expand...
Click to collapse
Tried this as well. I did it about 20 times before giving up. I might try it again and do it about 30 to 50 times. If I was just able to get to settings I'd be straight but I can't get to the settings so that's why I'm trying to reset it as a completely new device. Do you know if I could flash the 7 inch tab A firmware onto the smt580? Or flash the smt585 firmware onto the t580 and flash the BL AP and CSC?

softasspoptart said:
Tried this as well. I did it about 20 times before giving up. I might try it again and do it about 30 to 50 times. If I was just able to get to settings I'd be straight but I can't get to the settings so that's why I'm trying to reset it as a completely new device. Do you know if I could flash the 7 inch tab A firmware onto the smt580? Or flash the smt585 firmware onto the t580 and flash the BL AP and CSC?
Click to expand...
Click to collapse
From what I've read, Airwatch MDM lock can't be removed by flashing ANYTHING. It is third party anti-theft protection that has nothing to do with what ROM is installed. I know I ran into their stuff a few years ago with a used laptop I bought and only Airwatch was able to solve the problem after contacting their customer and verifying the laptop wasn't stolen.

4929york said:
From what I've read, Airwatch MDM lock can't be removed by flashing ANYTHING. It is third party anti-theft protection that has nothing to do with what ROM is installed. I know I ran into their stuff a few years ago with a used laptop I bought and only Airwatch was able to solve the problem after contacting their customer and verifying the laptop wasn't stolen.
Click to expand...
Click to collapse
Okay thanks. I'll get in contact with airwatch.

lewmur said:
I found this site. It is apparently an "MDM lock" and not FRP.
Click to expand...
Click to collapse
I did end up finding this. Seems the device is completely locked with no way to get around. When i flashed the device i may have deleted the admin privilages so there is no way of gettting around it as of now. I might end up paying someone to fix it or get around it or i wasted 180$ on a locked device. The guy i bought it from either blocked my number or deactivated his number as i cant get in contact with him. Pretty pissed. Thanks for all the help tho

I had the black screen password happen to me when I downgraded my SM-P580 from Android 7 to 6. Try clearing the cache. If that doesn't work, try reflashing, then turn it off and reboot to recovery and clear the cache.

BBowermaster said:
I had the black screen password happen to me when I downgraded my SM-P580 from Android 7 to 6. Try clearing the cache. If that doesn't work, try reflashing, then turn it off and reboot to recovery and clear the cache.
Click to expand...
Click to collapse
Okay I'll try that. Didn't try that yet. Will keep updated

lewmur said:
I found this site. It is apparently an "MDM lock" and not FRP.
Click to expand...
Click to collapse
Do you think if i changed the CSC to a different region on the tablet, and put a unlocked bootloader on it, would it might get rid of the frp lock? Do you happen to have a smt580? If so do you think there is anyother way of getting around this? say if i flashed like your firmware on to my tablet? Im desperate to get this thing unlocked as i would be out 180$ :crying:. Thanks for all your help so far. I really appreciate it man. Thanks to everyone who has helped so far.

Or what if i downgrade it to 6.1 and then downgrade it again to a even farther back version? Do you think this might work and gett me around the black screen? If so then i would be able to bypass the google verify account. Ima go ahead and try it unless its a risk of bricking the tablet completely.

I also read somewhere that if i flash the cp part on odin that it will erase all data. Think that might be worth a shot? But what do i need to insert in the cp slott? I know BL goes to BL and AP to AP and CSC home goes in CSC. So what goes in the cp slot?
EDIT: So instead of putting csc home in the csc slot i put the other csc file in its place. I checked the re partition box. When i did this i got a new message on the tablet in the top left of tthe download mode that says FRP is enabled, ignore PIT download. Any idea what this means?

How to recover Galaxy Tab A 10.1 (2016) without factory reset?

Hello, I need to access Galaxy Tab SM-P585 which belonged to a friend who has passed away, so pattern, pin and Google account info are unknown. Also firmware is original from Samsung, developer mode is disabled and OEM locked. The only options available are recovery mode, where I can do a factory reset or enter sideload mode, and download mode. I have found this guide https://forum.xda-developers.com/showthread.php?p=49666433 to bypass pattern but custom recovery is needed to use either Pattern Password Disable or Aroma File Manager methods. Then I have tried to install TWRP via this guide https://forum.xda-developers.com/ga...covery-official-twrp-galaxy-tab-10-1-t3473023 via Odin however device returns error "Blocked by FRP Lock" which from my search is either Google or Samsung https://www.samsung.com/us/support/frp/ Is there a way to access this device without factory reset?
Regards

Tamnais said:
Hello, I need to access Galaxy Tab SM-P585 which belonged to a friend who has passed away, so pattern, pin and Google account info are unknown. Also firmware is original from Samsung, developer mode is disabled and OEM locked. The only options available are recovery mode, where I can do a factory reset or enter sideload mode, and download mode. I have found this guide https://forum.xda-developers.com/showthread.php?p=49666433 to bypass pattern but custom recovery is needed to use either Pattern Password Disable or Aroma File Manager methods. Then I have tried to install TWRP via this guide https://forum.xda-developers.com/ga...covery-official-twrp-galaxy-tab-10-1-t3473023 via Odin however device returns error "Blocked by FRP Lock" which from my search is either Google or Samsung https://www.samsung.com/us/support/frp/ Is there a way to access this device without factory reset?
Regards
Click to expand...
Click to collapse
Try and reflash it using Odin with a stock firmware, that might work. Get your firmware from Sam Mobile firmwares. Just make sure you get the exact corresponding firmware...
Let me know how you go...
Author of Crucial Android Blog
http://crucialandroid.wordpress.com
Android App Developer

CrucialAndroid said:
Try and reflash it using Odin with a stock firmware, that might work. Get your firmware from Sam Mobile firmwares. Just make sure you get the exact corresponding firmware...
Let me know how you go...
Click to expand...
Click to collapse
Thanks, I've looked up for SM-P585 model but found only firmwares for ME and Africa. Tried with South African version but got SECURE CHECK FAILED (BOOTLOADER) error, which I believe is because it is not exactly the same version. From the recovery menu I've found out that I need 7.0/NRD90M/T585XXU2BRB2 version (multi region) so now downloading from samsunggalaxyrom and getdroidtips. I'll see how it goes with either one...
P.S. From the instructions "Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data." so I'll use HOME_CSC_ file to keep apps and the data.

Tamnais said:
Thanks, I've looked up for SM-P585 model but found only firmwares for ME and Africa. Tried with South African version but got SECURE CHECK FAILED (BOOTLOADER) error, which I believe is because it is not exactly the same version. From the recovery menu I've found out that I need 7.0/NRD90M/T585XXU2BRB2 version (multi region) so now downloading from samsunggalaxyrom and getdroidtips. I'll see how it goes with either one...
P.S. From the instructions "Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data." so I'll use HOME_CSC_ file to keep apps and the data.
Click to expand...
Click to collapse
If you use CSC it will wipe the device along with any security measures set up and basically put the device back to factory setup.

ashyx said:
If you use CSC it will wipe the device along with any security measures set up and basically put the device back to factory setup.
Click to expand...
Click to collapse
Unfortunately HOME_CSC didn't work, security settings were still there, so I have applied CSC. However now FRP requires me to logon using original Google account, even after factory reset, so this functionally means that device is only for a dumpster?

Tamnais said:
Unfortunately HOME_CSC didn't work, security settings were still there, so I have applied CSC. However now FRP requires me to logon using original Google account, even after factory reset, so this functionally means that device is only for a dumpster?
Click to expand...
Click to collapse
Not at all, FRP can be bypassed.

HELP!!! SM-P585Y FRP with Oreo

[SOLVED]
I apologize for my stupidity...
On a recent trip to China I recklessly purchased the used TAB A 10.1 model SM-P585Y.
The tablet worked perfectly, but when I came home I did a reset to clean it and once restarted the system remains with the FRP Lock.
The operating system is Oreo and I can't load any more twrp.
If I downgrade to Marshmallow, it doesn't reboot but only enters Factory Recovery mode...
In this mode, if I enable the Developer Option and then usb Debugging in the settings, there is no trace of the OEM unlock.
I can't load TWRP with odin nor with ADB (but maybe I don't do the correct procedure...)
If I do the update again at Oreo there is no recovery...
This is because when I flash Oreo with Chimera, the image file in the firmware is greater than the PIT, so I have to skip otherwise it stops.
When I start the system only arrives at the google account screen but I can't go any further, not even by opening a sort of chrome browser reduced by touching the google sign from one of the info screens that I can access from the keyboard settings.
Can someone please help me?

grifonedisanremo said:
I apologize for my stupidity...
On a recent trip to China I recklessly purchased the used TAB A 10.1 model SM-P585Y.
The tablet worked perfectly, but when I came home I did a reset to clean it and once restarted the system remains with the FRP Lock.
The operating system is Oreo and I can't load any more twrp.
If I downgrade to Marshmallow, it doesn't reboot but only enters Factory Recovery mode...
In this mode, if I enable the Developer Option and then usb Debugging in the settings, there is no trace of the OEM unlock.
I can't load TWRP with odin nor with ADB (but maybe I don't do the correct procedure...)
If I do the update again at Oreo there is no recovery...
This is because when I flash Oreo with Chimera, the image file in the firmware is greater than the PIT, so I have to skip otherwise it stops.
When I start the system only arrives at the google account screen but I can't go any further, not even by opening a sort of chrome browser reduced by touching the google sign from one of the info screens that I can access from the keyboard settings.
Can someone please help me?
Click to expand...
Click to collapse
Any chance of turning off FRP through the Google account of whoever's account was on the tablet once you had it? I thought you could disable that by logging into Google with that account and turning it off via the web.
Then again, I'm not the sharpest tool in the shed, others probably know much better.
Good luck!
Steve

steven.rn said:
Any chance of turning off FRP through the Google account of whoever's account was on the tablet once you had it? I thought you could disable that by logging into Google with that account and turning it off via the web.
Then again, I'm not the sharpest tool in the shed, others probably know much better.
Good luck!
Steve
Click to expand...
Click to collapse
When I bought the used tablet, I didn't know about the FRP, now I'm at home, and I wouldn't even know how to find the Chinese who sold it to me...

grifonedisanremo said:
When I bought the used tablet, I didn't know about the FRP, now I'm at home, and I wouldn't even know how to find the Chinese who sold it to me...
Click to expand...
Click to collapse
Solved, thanks!

grifonedisanremo said:
Solved, thanks!
Click to expand...
Click to collapse
Just out of curiousity, what worked for you?
Steve

steven.rn said:
Just out of curiousity, what worked for you?
Steve
Click to expand...
Click to collapse
External service, they connected remotly with me and did it...