Related
Quick question, I have an 2GB (Non-class 6 SD card) and it was working okay with my G1 phone. I partitioned it with no problem, have apps, themes, roms, basically the whole nine yards on it. I recently just purchased a new 8 gb 6 class SD card and was wondering if Paragon Manager or any other program can transfer the data over flawlessly? I know I have to create a new ext3 part (probably using paragon manager) and then transfer all the data over...but was wondering if anybody else did this before without running into any issues and what was the overall process you took? I appreciate any help. Thank you.
no issues here, done it a couple times. didnt use paragon though. used ext support on my mac to copy all files from both partitions, then format the card using GParted on my Slax USB. then put my files back, inserted into g1 and booted the phone. cyanogens MOD works great with it.
malaeus said:
no issues here, done it a couple times. didnt use paragon though. used ext support on my mac to copy all files from both partitions, then format the card using GParted on my Slax USB. then put my files back, inserted into g1 and booted the phone. cyanogens MOD works great with it.
Click to expand...
Click to collapse
Quick question for you, did your apps still show as installed in the market when you swapped cards? I have been meaning to get my 8GB cards (I have a few with tv episodes on them) set up so I can swap between them and my 16GB at any time, but this question is one that is keeping me from trying yet (that and a lack of time).
Thanks.
insert original card and do not mount it (or unmount it if auto),
dd if=/dev/sdcardfile of=/home/yourusername/tmpsdbackup
swap cards and do not mount it (or unmount it if automatic),
dd if=/home/yourusername/tmpsdbackup of=/dev/sdcardfile
Then run gparted, move your ext partition to the end of the disk and expand your crap32 partition to max.
wait so do i just partion my 8 gig c6 and than copy all files off my other sd card and i should be able to boot up, of course redownload everything or should i not try that
and when i say copy my files ove3r just the ones on my sdcard not all my apps
Goog1e Phone said:
Quick question, I have an 2GB (Non-class 6 SD card) and it was working okay with my G1 phone. I partitioned it with no problem, have apps, themes, roms, basically the whole nine yards on it. I recently just purchased a new 8 gb 6 class SD card and was wondering if Paragon Manager or any other program can transfer the data over flawlessly? I know I have to create a new ext3 part (probably using paragon manager) and then transfer all the data over...but was wondering if anybody else did this before without running into any issues and what was the overall process you took? I appreciate any help. Thank you.
Click to expand...
Click to collapse
I used Partition Manager to partition my 8g Sd card into a Ext3 partition. What I did was just wipe, reflash my ROM (Cyanogen's 3.4) and reinstalled all the apps from the Market. It seems like it would take forever, but it really didn't.
The reason why I reflashed was because when I changed SD cards originally, it stopped reading all the original files from the original SD. All-in-all, it was very easy to just: Wipe, Reflash the ROM, then reinstall apps from Market, which should still be listed under Downloads.
how do you format an ext3 partion
So all i want to do is take everything off my 4gb sd card and use an 8gb sd card so that I have more storage space. Everything works great as is, and I wanted to keep everything as is. Just need more storage space. I've looked through the forums and haven't found anything that addresses this process. I am running CyanogenMod 7.0.3 w/a 4gb sandisk micro sd card. How do I copy so that it boots just like my 4gb card???? Thanks ahead of time for any help.
Bambam01 said:
So all i want to do is take everything off my 4gb sd card and use an 8gb sd card so that I have more storage space. Everything works great as is, and I wanted to keep everything as is. Just need more storage space. I've looked through the forums and haven't found anything that addresses this process. I am running CyanogenMod 7.0.3 w/a 4gb sandisk micro sd card. How do I copy so that it boots just like my 4gb card???? Thanks ahead of time for any help.
Click to expand...
Click to collapse
I recommend just writing an image file with winimage. Then writing it to a 8gb card, then using Easeus Partition manager to expand the last partition to full 8 gb.'
Do you boot from the SD card or eMMC?
If it's the latter, just copy the contents of the old card to the new one.
If it's the former, I recommend a fresh install; use a backup program (MyBackup, Titanium Backup) to back up your Apps and Data and then restore when you're done with the fresh install.
I'd like to do this as well.. in response to previous reply.. there are 4 partitions (boot, 2 other and last one with your data) do I have to create 4 different images with winimage or just for the first boot partition or does the winimage creates the image of the whole msd card?
The winimage will create a 4 gb image of your card on the 8 gb cards including existing partitions. What you'll need to do is get the largest partition to expand to the whole card. Assuming that the 4gb install on SD is the same as an 8 gb install if you did it fresh.
If the partitions are set different for 8 gb on a fresh install, you're better off just doing a fresh install and use titanium backup as the other guy said.
Phatdawg said:
If the partitions are set different for 8 gb on a fresh install, you're better off just doing a fresh install and use titanium backup as the other guy said.
Click to expand...
Click to collapse
That's a good point, the Size-agnostic SD installer uses different partition sizes for everything except the boot partition depending on the size of the card.
I tried winimage first to see if it even worked. Which it didn't. I didn't try to expand the existing partition. It just booted as a normal nook. You would think this would be a easy process but.... Lol, always new challenges. Guess that's why I enjoy doing this.
Well I tried yet again w image, expanded the partition. Still. Didn't work. I must be missing something. How hard can it be to make a copy of a bootable card? Must b brain dead today! Any other thoughts? Thanks!
Bambam01 said:
Well I tried yet again w image, expanded the partition. Still. Didn't work. I must be missing something. How hard can it be to make a copy of a bootable card? Must b brain dead today! Any other thoughts? Thanks!
Click to expand...
Click to collapse
I have done this several times, and I recommend downloading easus todo backup free. Then place both sdcards in a card reader, run todo backup and just copy the 4g to the 8g and expand the fourth partition right there in todo.
This applies especially if you want to copy to same size sd's, as you will not run into the usual image sizing issues.
Hope this helps
I don't know what you're doing wrong. before expanding the partition, make sure the sd boots, if it doesn't, then there's a problem with image being read or written as opposed to the partition.
I also had a problem with a new SD card not booting that I fixed by using the nook (that is the core nook OS) to reformat the card, then put the image onto the SDcard (shouldn't have changed anything as far as I know, but it did anyway).
Ok I tried this and it worked flawlessly. Used win32diskimager to "read" my 4gb sd with cm7 image. and then used "write" to 8gb sd card. It cloned 4 gb original image with 4 partitions and one unused partition of 4 gb. After that used easeus partition manager(latest version) to format unused pattition to fat32 and then merged with last partition of 2gb (move/resize) ..so now I have 6 gb of data partition which i can use to transfer files or move apps from nook's internal drive. The new 8gb card with cm7 image booted without any issues keeping my original settings of 4gb. One thing to mention that somehow it did not work on one pc with windows xp (kept getting write error on win32diskimager program)but worked on my laptop with windows 7.
That is exactly how I have done it in the past as I described in my first post. I don't know why a person would have trouble with it unless there was a format issue (i.e. ntsf, etc).
I used Manualnooter to root my NC and am running CM7 now. The device was only recognizing the SD card as being 1GB, even though it's 8GB. I went into the Settings and formatted the SD card just like it suggests in the instructions here. However, it's just showing 1GB wih 875MB avail under "SD Card" within Storage Settings. When I hook it up to my PC, it connects as 2 drives. One is titled BOOT and one is just a Removable Disk which appears to be the active storage since it has some recent downloads and the BOOT doesn't. Both show 1GB capacity.
I want to get TWRP working but more importantly I want a functioning 8 GB card. I didn't post this in the MN app thread because I don't know for sure if that's what caused the problem or not. Please halp?
Used the Mini-Tool here to expand the partition: http://forum.xda-developers.com/showthread.php?t=2062357. I now have ~7GB free in \mnt\emmc and I guess that should do.
Let me know if there is a smarter way to go about doing this.
japaneezy said:
Used the Mini-Tool here to expand the partition: http://forum.xda-developers.com/showthread.php?t=2062357. I now have ~7GB free in \mnt\emmc and I guess that should do.
Let me know if there is a smarter way to go about doing this.
Click to expand...
Click to collapse
Don't know if TWRP has a 'partition SD card' option, but CWM recovery does and that is what I used to reclaim the extra space on my 16 GB SD card when cm10 was installed.
Hi! Successfully rooted my Nook ST using Nook Manager, except I used a 32 GB micro SD card to do the rooting. After rooting, I ended up with two partitions on the SD card, Nook (239 MB) and Nook Manager (62.9 MB). I was wondering what I need to do to be able to utilize the rest of the space on the card? The reason I bought a 32 GB card was so I could store all my sideloaded books there, and now I find I'm just limited to the space/partitions showing up when I connect the nook via USB.
You need to repartition your card.
Partition Magic can do that.
If you want to use multiple partitions on the SD card (like 2 x 16 GB) you might want to look at:
http://forum.xda-developers.com/showthread.php?t=2184495
Renate NST said:
You need to repartition your card.
Partition Magic can do that.
If you want to use multiple partitions on the SD card (like 2 x 16 GB) you might want to look at:
http://forum.xda-developers.com/showthread.php?t=2184495
Click to expand...
Click to collapse
Thanks, will download a copy of Partition Magic later. I really am completely clueless when it comes to programming though. In fact, I'm only here because the folks at mobileread told me I'd probably have better luck having my question/s answered here than there. So just to confirm, I can repartition the drive using partition magic so I'll have one extra partition for the books I want to sideload, and I'm good to go already when I re-insert the SD card into the Nook? Or do I have to attempt the code that you gave in the thread you linked?
If you want to have a single FAT partition on your SD card you can do that without much change.
It comes down to whether you want to be able to pull the SD card and plug it into random desktops and things.
If you want to have multiple partitions or ext3 partitions you will have to use the new vold in the link above.
if used windows 7,8. Insert a memory card into the card reader. Go to cmd(administrator mode) and run command:
Diskpart
List Disk
Select Disk 1 (#select sdcard)
clean (#clean partition sdcard)
create partition primary
active
format fs=fat32 quick
assign (#run command if not view sdcard in mycomputer )
Renate, I tried to repartition my SD card, but got a "disk is not formatted, do you want to format it now?" message. So I had no choice but to do a data recovery using EaseUs Partition Master first, then went ahead and clicked format now. Then I tried using Minitool Partition Wizard (couldn't find a free version of Partition Magic) to create new partitions in the formatted SD card so that the NookManager partition would be larger (27 GB) while the NookBackup partition would be 2 GB. Except that I can't seem to create any new partitions at all. And I also have no idea how to restore the data I'd backed up earlier either.
Sorry, I missed seeing this come up when you posted it.
When your Nook asks you if you want to format you should say "No!".
It could be that it misidentified the situation.
In any case, you want to look closer before formatting anything.
Here's a gotcha.
If you are using ext3 and the internal clock has reset itself then the last mount will be in the future.
That makes things angry. Check that the date/time on the Nook is correct.
You can use gparted to give the card the partition layout you need (i.e. first NookManager partition is big, second NookBackup partition is only large enough to hold a backup), then write the first partition from NookManager.img into first partition of the card (you need to do something roughly similar to this. Then you can use gparted to set the "boot" flag on the first partition and use the card to backup&root your Nook. Then remove the "boot" flag, and keep using the card for storage (it's a bit messy to have both user&app files AND NookManager boot files in the same place, but if you only have one card, then this is inevitable - i haven't found a way to mount the second or the third partitions from the card). The card will act as normal storage device when flag is not set, and as NookManager bootable card when flag is set.
So I have a Samsung Tab a6 7 T280 wifi and I've inserted a MicroSD card (128GB). I've done this with the stock os first and I just got the message card can be removed safely. and it wouldn't let me mount it.
Now I've installed the Tinker V5.1 Stock Rom over it and it still happens. (wanted a faster os on it).
I can reformat the card with twrp to be ext4 or exFAT and it doesn't change a single thing. if I insert the sd card I get a quick preparing card and then instantly the message card can be safely removed. clicking on mount sd card in storage from settings doesn't do anything except prompt same message.
I'd try a different sdcard.
Okay, so I hope I can help, I have the SM-T280, I do not use Tinker ROM, instead I debloated my stock ROM and use an SPA kernel by @_mone. If you're trying to extend storage to your tablet, you'll need to use a PC to partition the SD card two PRIMARY partitions. I used on Windows MiniTool Partition Wizard (free), and I used a FAT32 partition and an ext2 partition. With the stock ROM/kernel I had problems using ext4 or extFAT which didn't make sense to me but it is what it is, and I used the app Apps2SD to handle all the work.
The main thing, you need to make sure your SD card has TWO (2) PRIMARY partitions.
Good luck.
zenful said:
Okay, so I hope I can help, I have the SM-T280, I do not use Tinker ROM, instead I debloated my stock ROM and use an SPA kernel by @_mone. If you're trying to extend storage to your tablet, you'll need to use a PC to partition the SD card two PRIMARY partitions. I used on Windows MiniTool Partition Wizard (free), and I used a FAT32 partition and an ext2 partition. With the stock ROM/kernel I had problems using ext4 or extFAT which didn't make sense to me but it is what it is, and I used the app Apps2SD to handle all the work.
The main thing, you need to make sure your SD card has TWO (2) PRIMARY partitions.
Good luck.
Click to expand...
Click to collapse
What about the Sizes? As in one partition 60 GB the other one also 60 GB ? Or the fat32 partition 1 GB and the ext2 the rest?
Panslothda said:
What about the Sizes? As in one partition 60 GB the other one also 60 GB ? Or the fat32 partition 1 GB and the ext2 the rest?
Click to expand...
Click to collapse
FAT32 is not for large capacity storage. Use exFat. There isn't much point in having such a large ext2 partition. It's incompatible with media transfer protocols unless you use a Linux system.
This device fully supports exFAT. I use a 64gb sdcard no issues.
ashyx said:
FAT32 is not for large capacity storage. Use exFat. There isn't much point in having such a large ext2 partition. It's incompatible with media transfer protocols unless you use a Linux system.
This device fully supports exFAT. I use a 64gb sdcard no issues.
Click to expand...
Click to collapse
Well my current one is exfat formatted. works perfectly fine on PC only thing is its 128 GB.... I mean is that maybe the issue? that its to large?
Panslothda said:
Well my current one is exfat formatted. works perfectly fine on PC only thing is its 128 GB.... I mean is that maybe the issue? that its to large?
Click to expand...
Click to collapse
I wouldn't think so, I'm sure it supports 128gb cards.
Just partition it into to halves. First partition exfat. Leave the other unformatted and see what happens.
ashyx said:
I wouldn't think so, I'm sure it supports 128gb cards.
Just partition it into to halves. First partition exfat. Leave the other unformatted and see what happens.
Click to expand...
Click to collapse
partitioned into a 40 GB exFAT partition and left rest unpartitioned. Didn't change anything. if I pop it in the tablet I get a short preparing sd card notification then immediately an SD card safe to remove notification...
I'm really confused by this. The tablet is new so I doubt that it's broken but I don't know. Do you know if there's a way to check any kind of logs on Android like dmesg on Linux as an example to see what happens with the sd card?
Panslothda said:
partitioned into a 40 GB exFAT partition and left rest unpartitioned. Didn't change anything. if I pop it in the tablet I get a short preparing sd card notification then immediately an SD card safe to remove notification...
I'm really confused by this. The tablet is new so I doubt that it's broken but I don't know. Do you know if there's a way to check any kind of logs on Android like dmesg on Linux as an example to see what happens with the sd card?
Click to expand...
Click to collapse
It's best just try out another card to rule out the card.
ashyx said:
It's best just try out another card to rule out the card.
Click to expand...
Click to collapse
Welp gotta buy one first then :/
Panslothda said:
Welp gotta buy one first then :/
Click to expand...
Click to collapse
Nobody can lend one for a few minutes? Or try the card in someone else device?
Panslothda said:
So I have a Samsung Tab a6 7 T280 wifi and I've inserted a MicroSD card (128GB). I've done this with the stock os first and I just got the message card can be removed safely. and it wouldn't let me mount it.
Now I've installed the Tinker V5.1 Stock Rom over it and it still happens. (wanted a faster os on it).
I can reformat the card with twrp to be ext4 or exFAT and it doesn't change a single thing. if I insert the sd card I get a quick preparing card and then instantly the message card can be safely removed. clicking on mount sd card in storage from settings doesn't do anything except prompt same message.
Click to expand...
Click to collapse
According to Samsung, the T280 will support a 256gb SD card BUT I know from experience that SD cards over 32gb can be VERY touchy. If you use a PC to remove all of the partition and then let the tablet try to do its own formatting and it still doesn't work, I'd say you have an incompatible SD card. That doesn't mean the card is bad but that it just won't work in the T280.
As an example, a Samsung EVO+ card (which can be found on eBay for $30) will probably work while a "no name" card from China, probably won't.
lewmur said:
According to Samsung, the T280 will support a 256gb SD card BUT I know from experience that SD cards over 32gb can be VERY touchy. If you use a PC to remove all of the partition and then let the tablet try to do its own formatting and it still doesn't work, I'd say you have an incompatible SD card. That doesn't mean the card is bad but that it just won't work in the T280.
As an example, a Samsung EVO+ card (which can be found on eBay for $30) will probably work while a "no name" card from China, probably won't.
Click to expand...
Click to collapse
I always use Samsung EVO cards and they always work perfectly. Price per GB they are very reasonable too.
Scandisk ultra i find ok no matter what size
Sent from my SM-T585 using XDA-Developers Legacy app