Hey there,
I saw some users requesting for the Modem Files for XT1068 so here you go! If you accidently flashed the Modem files while updating to Lollipop using a different firmware, then these Modem Files will help you restore your Network signal.
The below zip file contains the modem files:
fsg.mbn
NON-HLOS.bin
If you already flashed the wrong modem files, just reboot to BootLoader and flash these files using the following commands:
Code:
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe reboot
Download: https://drive.google.com/file/d/0B9m4R-49mhLuTWlLUGJtUVpjY1E/view?usp=sharing
Hit Thanks! if I helped and do let me know if you need any other files from the following firmwares (I have these firmwares on my Drive and can upload individual files if necessary):
XT1063
XT1064
XT1068
That is modem firmware with all frequency bands enabled, yes? Are Motorola known to send outsome phones to retail without restricting them to regional bandings, or has someone inspected the binaries? ... Sorry for the noob question -- I'm just curious
No
rufflove said:
That is modem firmware with all frequency bands enabled, yes? Are Motorola known to send outsome phones to retail without restricting them to regional bandings, or has someone inspected the binaries? ... Sorry for the noob question -- I'm just curious
Click to expand...
Click to collapse
Different models (XT1063/64/68/69) are all locked with regional bands. XT1068 is for Middle East & Asia, while 63 is UK, 64 is US and 69 is Brazil.
But it possible to recover signal of a different region by flashing the appropriate Modem files for that region, i.e, on a XT1064, flashing the XT1068 Modem files will allow you to use the US fw in MEA.
Correct me if I'm wrong.
Can someone please tell me that for MFN.....we provide a single imei no. instead of 2 for xt1068 India?
Coz i have two Sims with different IMEI's
Yes
rahilsayed said:
Can someone please tell me that for MFN.....we provide a single imei no. instead of 2 for xt1068 India?
Coz i have two Sims with different IMEI's
Click to expand...
Click to collapse
They ask for only 1 IMEI. :good:
SOURCE: Cause I registered for the MFN and they asked to enter any one IMEI.
KrishnaSagar said:
Different models (XT1063/64/68/69) are all locked with regional bands. XT1068 is for Middle East & Asia, while 63 is UK, 64 is US and 69 is Brazil.
But it possible to recover signal of a different region by flashing the appropriate Modem files for that region, i.e, on a XT1064, flashing the XT1068 Modem files will allow you to use the US fw in MEA.
Correct me if I'm wrong.
Click to expand...
Click to collapse
Sure, the different model variants evidently have different bands enabled/disabled in firmware, but what is less clear is whether the modem firmware you posted is common to all retail XT1068 devices, regardless of the region/country in which they were sold.
NO
rufflove said:
Sure, the different model variants evidently have different bands enabled/disabled in firmware, but what is less clear is whether the modem firmware you posted is common to all retail XT1068 devices, regardless of the region/country in which they were sold.
Click to expand...
Click to collapse
XT1068 is also sold in Brazil which will have BR in the system version, these modem files are for the RETAILDSDSALL version only. Check your Settings->About page to identify your device.
Please delete! XT1068 has different firmware for Germany, India, Brazil and UK so flashing these files is bad of it does not match your firmware! People are posting stuff without realizing what they are doing! This is bad
Sent from my XT1069 using XDA Free mobile app
As I have mentioned in the Title of the post, this is for the RETAILDSDSALL version only.
KrishnaSagar said:
Hey there,
I saw some users requesting for the Modem Files for XT1068 so here you go! If you accidently flashed the Modem files while updating to Lollipop using a different firmware, then these Modem Files will help you restore your Network signal.
The below zip file contains the modem files:
fsg.mbn
NON-HLOS.bin
If you already flashed the wrong modem files, just reboot to BootLoader and flash these files using the following commands:
Code:
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe reboot
Download: https://drive.google.com/file/d/0B9m4R-49mhLuTWlLUGJtUVpjY1E/view?usp=sharing
Hit Thanks! if I helped and do let me know if you need any other files from the following firmwares (I have these firmwares on my Drive and can upload individual files if necessary):
XT1063
XT1064
XT1068
Click to expand...
Click to collapse
I would like to have a complete stock for x1068
Please provde me the download link.
---------- Post added at 06:48 AM ---------- Previous post was at 06:24 AM ----------
KrishnaSagar said:
Hey there,
I saw some users requesting for the Modem Files for XT1068 so here you go! If you accidently flashed the Modem files while updating to Lollipop using a different firmware, then these Modem Files will help you restore your Network signal.
The below zip file contains the modem files:
fsg.mbn
NON-HLOS.bin
If you already flashed the wrong modem files, just reboot to BootLoader and flash these files using the following commands:
Code:
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe reboot
Download: https://drive.google.com/file/d/0B9m4R-49mhLuTWlLUGJtUVpjY1E/view?usp=sharing
Hit Thanks! if I helped and do let me know if you need any other files from the following firmwares (I have these firmwares on my Drive and can upload individual files if necessary):
XT1063
XT1064
XT1068
Click to expand...
Click to collapse
Krishna,
I did same as what you menioned, I think I have the SIM 1 working now but SIM 2 still isn't working.
I had to use these commands
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
And solutions for this???
Same Problem
KrishnaSagar said:
Hey there,
I saw some users requesting for the Modem Files for XT1068 so here you go! If you accidently flashed the Modem files while updating to Lollipop using a different firmware, then these Modem Files will help you restore your Network signal.
The below zip file contains the modem files:
fsg.mbn
NON-HLOS.bin
If you already flashed the wrong modem files, just reboot to BootLoader and flash these files using the following commands:
Code:
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe reboot
Download: https://drive.google.com/file/d/0B9m4R-49mhLuTWlLUGJtUVpjY1E/view?usp=sharing
Hit Thanks! if I helped and do let me know if you need any other files from the following firmwares (I have these firmwares on my Drive and can upload individual files if necessary):
XT1063
XT1064
XT1068
Click to expand...
Click to collapse
Hello,
and thanks for this forum.
I have the same problem. I have a Moto G (2nd Generation) which I flashed with Titan Prime ROM for my XT1068. Everything is cool but no network.
I hang on that forum that treats the same problem with XT1092. I downloades the ZIP file and followed the instructions. But I have the same errors like "System stopped..". And I realised that I don't have the same version. With some Google I downloaded the corresponding version with that forum . Thanks guys!!!!
But I see that when downloading we have 4.4.4 (KitKat). But anyway I used it. Now it detects my SIM, displays the network name for each SIM, but always "no service" like I am in airplane mode.
Helps guys!!!!
Require modem files for moto X (XT1052)
Hi KrishnaSagar,
Would these files work for Moto XT1052, I have accidentally deleted my IMEI (0). Any help would be appreciated. TIA.
Hy . i m using stock 5.0.2 but i my 1sim slot network always loss .. Can i flash this
Sent from my XT1068 using XDA Free mobile app
@KrishnaSagar
Tried, but still no network.
flashed Stock ROM 5.0.2 - still no network.
CM12.1 - still no network.
is there any special procedure to flash those Modem files? or anything for Kernel?
PS: Using XT 1068 - Indian. trying all those since 3 days.
Hi Krishna,
I am using Candyroms android version 5.1.1 itry to flash your modems files but no luck currently i am downloading stock rom Retaildsdsall_XT1068_5.0.2_LXB…y_Installer.zip . i am trying my luck but may be, i need your help i have MOTO G2 XT1068(INDIA). so please give me the link for modem files of this device. Thanks in advanced
Krishna i flash Retaildsdsall_XT1068_5.0.2_LXB…y_Installer.zip my phone networks are up but unable to start wifi in this stock wifi don't start please suggest
Anyone know the difference between the retca (Canadian) xt1064 and the retus (american) xt 1064?
I'm in Canada and bought retus unlocked from eBay. I tried flashing the retca modem files and lost radio. Both xt1064.
AFAIK, the same bands are used in both USA and Canada.
Sent from my Moto G 2014 using XDA Free mobile app
KrishnaSagar said:
Hey there,
I saw some users requesting for the Modem Files for XT1068 so here you go! If you accidently flashed the Modem files while updating to Lollipop using a different firmware, then these Modem Files will help you restore your Network signal.
The below zip file contains the modem files:
fsg.mbn
NON-HLOS.bin
If you already flashed the wrong modem files, just reboot to BootLoader and flash these files using the following commands:
Code:
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe reboot
Download: https://drive.google.com/file/d/0B9m4R-49mhLuTWlLUGJtUVpjY1E/view?usp=sharing
Hit Thanks! if I helped and do let me know if you need any other files from the following firmwares (I have these firmwares on my Drive and can upload individual files if necessary):
XT1063
XT1064
XT1068
Click to expand...
Click to collapse
Hi... m not getting any signal in dim slot 1.. Itjust shows emergency call only-airtel.. I didnt use fastboot to flash any modem files.. I can still use sim slot 2..but cant use 3g...if i use dese files i will be able to use sim slot 1..have indian version x68..plz reply.. I can use dis on cm12??
xt1068 is all same hardware the only difference is this regional version of software, for indian stock (global retail dsds) use jan 6th or feb 25th version in my 5.0.2 signature - this will restore stock
Is this zip twrp flashable...???
---------- Post added at 09:46 AM ---------- Previous post was at 09:41 AM ----------
I tried flashing them in fastboot mode after installing cm12.1 worked like charm......☺ both sims are working fine
xt1068 lost IMEI number,Base Band Number, network after Marshmallow update recentrly
I recently updated the Marshmallow 6.0 update and after that everything one xt1068 stopped working except Bluetooth. After that I tried lot of things like factory reset, cache format but nothing changed. Then I searched the forum and unlocked the boot loader and tried flashing kitkat to marshmallow again but with no output. My base band version is unknown my Imei number is null and my wifi is also not working. Please advise me if this is a hardware problem or is there any solution to this. I shall be obliged if somebody gives me step by step genuine solution.
PS. I sent it for moto g service dealer and after hearing the problem and handling my phone he said its a motherboard problem. Same problem happened to my friends Nokia windows phone last month and his problem was solved flashing the software..
In case I can't solve the whole SIM problem I need to get the phone back to my carrier and get it repaired/replaced so I have to get it back to carrier stock and lock the bootloader. But how do I install a ROM extracted from Update Extractor? Maybe someone has the syntax for a batch file to do it?
Update extractor will produce .img files. You need to follow the steps listed in Chapter 4: Unbricking from: https://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994
You will need fastboot (and fastboot drivers if using Windows) installed.
It's up to your provider to decide if they still offer a warranty. Unlocking the bootloader voids the warranty, and re-locking will show that the bootloader has been previously unlocked.
Hello,
I am flashing the lineageos with the official instruction. The rom is installed (partition was decrypted), but I have no signal.
After a long research on the net and various instructions and tips. My two IMEIs disappeared (sim cards were then no longer recognized).
Finally I have a stock rom with Qfil installed (13s). I was then able to restore the IMEIs through the AT Port Menu via Qualcomm IMEI RepairTool. The SIM cards are recognized again but do not dial into the network. I have also a baseband version package.
In the *#*#4363#*#* menu there were all frequency bands to choose from, but I can not select one. The error message always appears ... [unsuccessful]
Maybe someone else has a tip?
If u have backup modem,you can restore via fastboot
Or u can backup modem,modemst1,modemst2 image,save in your computer,,then delete modem using fastboot command
Fastboot erase modem.img st1 and st2
Then restore modem
Fastboot flash modem modem.img
St1 and st2
Dont forget to check imei
I can solve with this
https://forum.xda-developers.com/le-2/help/le-2-x526-rose-gold-reports-network-t3855226
Disclaimer:I do not take responsibility for your bricked device. Try it at your own risk.
Notice:This guide is written mainly with these references:
Golv's Reply under Thread "NEW link add ...HTC U11 RUU 3.31.401.1 Dual sim"
paulpier007's GUIDE for Downgrading using HTC DevInfo Tool
Jason10246's Thread for Downgrading using hosd.img with RUU Decrypt Tool
Captain_Throwback's Thread for RUU Decrypt Tool
Introduction:
HTC started to use hosd partition to verify version number when you try to flash RUU since I do not know when for that I have been fairly unaware on HTC devices. A signature error 132 is returned when you try to downgrade with only a changed version number after reading Golv's downgrade guide. Which as a result I decided to write a new guide with a more general but not detailed guide for those with basic understandings of how to do this.
Requirements:
You have read those four threads above
RUU Decrypt Tool and Internet connection
RUU file that you would like to downgrade to
TWRP recovery
HTC adb and fastboot drivers installed and you have no issue finding your device in adb & fastboot
htc_fastboot
Steps:
Use RUU Decrypt Tool to decrypt your RUU using firmware option -f. You need internet connection to do this.
After completed, look for hosd.img in the output folder.
Change version number using Golv's method with HTC Version Tool. You can find it as the attachment.
Flash hosd.img file in bootloader, not download mode.
htc_fastboot flash hosd [pathToHosd.img]
Reboot to Download mode. If successful, the OS version will be the same as your RUU file that we would like to downgrade to.
Flash RUU in Download mode and it is done.
However, if your HTC U11 is the same as mine, Single SIM US Unlocked (WHL), you can just grab the 2.42.617.7 hosd.img that I extracted earlier which is in the attchments.