Hello , i have a Lenovo A6000 and after some GPS issue i decided to flash it with TWRP 2.8.6.1 and add a custom (CM11) rom.
After a little bit of picking around and trying various gps fixes i think the problem is hardware wise.
I unrooted the phone (i used kingroot to root, comes with an unroot button) but now i need the factory recovery image so i can return it back for repair (factory rom was backed up from twrp and recovered successfully).
The current (and up to date according to its settings) rom is S025_151016 and its a single sim model. Do i need the same recovery ? I have found the S010_151016 recovery on the internet, is it ok to flash this one ?
Also general tips to fix gps if possible ? I tried TopNTP & various cm11 roms
Thanks for the answers
spyridonas said:
Hello , i have a Lenovo A6000 and after some GPS issue i decided to flash it with TWRP 2.8.6.1 and add a custom (CM11) rom.
After a little bit of picking around and trying various gps fixes i think the problem is hardware wise.
I unrooted the phone (i used kingroot to root, comes with an unroot button) but now i need the factory recovery image so i can return it back for repair (factory rom was backed up from twrp and recovered successfully).
The current (and up to date according to its settings) rom is S025_151016 and its a single sim model. Do i need the same recovery ? I have found the S010_151016 recovery on the internet, is it ok to flash this one ?
Thanks for the answers
Click to expand...
Click to collapse
You can download your recovery as per your current android version from here, and then flash it
www[dot]techolite[dot]com/34431/lenovo-a6000plus-pure-stock-rom-recovery[dot]html
Replace [dot] with " . " in the link
And first try this to check if the recovery wont cause any problem - "fastboot boot recovery.img" where recovery is the name of your recovery image. If the phone successfully boots into it that means you can flash that recovery without any problem.
For permanently flashing recovery - "fastboot flash recovery recovery.img"
Hope it helps!!
sasukay said:
You can download your recovery as per your current android version from here, and then flash it
www[dot]techolite[dot]com/34431/lenovo-a6000plus-pure-stock-rom-recovery[dot]html
Replace [dot] with " . " in the link
And first try this to check if the recovery wont cause any problem - "fastboot boot recovery.img" where recovery is the name of your recovery image. If the phone successfully boots into it that means you can flash that recovery without any problem.
For permanently flashing recovery - "fastboot flash recovery recovery.img"
Hope it helps!!
Click to expand...
Click to collapse
I have that recovery, it's the S010, but i have S025 that's why im asking if its ok.
Lets hope they accept it with S010 !
spyridonas said:
I have that recovery, it's the S010, but i have S025 that's why im asking if its ok.
Lets hope they accept it with S010 !
Click to expand...
Click to collapse
Try "fastboot boot recovery.img" first
If it works and the phone reboots then permanently flash the recovery using "fastboot flash recovery recovery.img"
sasukay said:
Try "fastboot boot recovery.img" first
If it works and the phone reboots then permanently flash the recovery using "fastboot flash recovery recovery.img"
Click to expand...
Click to collapse
It works the problem i have is the version number don't much, but maybe it doesn't matter
spyridonas said:
It works the problem i have is the version number don't much, but maybe it doesn't matter
Click to expand...
Click to collapse
As long as your phone is booting...who cares for a different version
spyridonas said:
Hello , i have a Lenovo A6000 and after some GPS issue i decided to flash it with TWRP 2.8.6.1 and add a custom (CM11) rom.
After a little bit of picking around and trying various gps fixes i think the problem is hardware wise.
I unrooted the phone (i used kingroot to root, comes with an unroot button) but now i need the factory recovery image so i can return it back for repair (factory rom was backed up from twrp and recovered successfully).
The current (and up to date according to its settings) rom is S025_151016 and its a single sim model. Do i need the same recovery ? I have found the S010_151016 recovery on the internet, is it ok to flash this one ?
Also general tips to fix gps if possible ? I tried TopNTP & various cm11 roms
Thanks for the answers
Click to expand...
Click to collapse
Dear all.
Regarding GPS. I also seeking a way/solution how to make GPS worked.
I saw all custom rom come with stable GPS. But whenever I flash ROM the GPS problem still there. Is it a all known issue for A6000/A600Plus?
Regards.
Related
Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
How to install
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.
Brilliant! Thank you so much! Do you know any custom ROM what is better than the factory ROM?
There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.
Adreno306™ said:
There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.
Click to expand...
Click to collapse
Do you think it's easier/possible to adapt a ROM from a similar device like say, the Alcatel
Pop 2 (5) Premium ? I don't know if there's any ROM for that phone tho, but since it's branded as Alcatel you might get more support from the community here than by using Vodafone's name.
Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.
Adreno306™ said:
Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.
Click to expand...
Click to collapse
Hey, Andreno306
I don't know much about Rom's in that level of expertise I'm afraid :/ but I did some digging and came across this simple tutorial on XDA:
http://forum.xda-developers.com/showthread.php?t=2387941
I imagine it does not work for every single device out there, at least not with modifying stuff after, but it might be a good starting point I think, in fact I would try to actually make one myself had I a working PC currently at home. But even if I did I had no way of testing it because this is currently my daily driver phone.
Just wanted to say that I'm also very interested in getting a slim ROM for this device. I can't offer any expertise I'm afraid! Just wanted to show that there are people interested in your project.
:highfive:
Stock Kernel
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?
vojta_horanek said:
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?
Click to expand...
Click to collapse
I have one
https://mega.nz/#!tMJD3B4T!f6m2ELYCVupqGCcN2aGbkrNzEqijLu7au-7usEfeVL0
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)
Demonlord6 said:
I have one
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)
Click to expand...
Click to collapse
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)
vojta_horanek said:
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)
Click to expand...
Click to collapse
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?
Demonlord6 said:
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?
Click to expand...
Click to collapse
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#
vojta_horanek said:
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#
Click to expand...
Click to collapse
Yeap, that's not the same version as my ROM, mine is not 130FNN etc. Maybe that's why it didn't work
Enviado do meu GT-S5280 através de Tapatalk
Sorry for the stupid question but... does it works on Smart Prime 7 too?
Has anyone installed that linked ROM? It seems to be what we are looking for... a slim debloated rom.
I presume we need to be rooted, install this TWRP, then flash that ROM?
It mentions unlocking the bootloader, I dont think I've seen any info anywhere about unlocking the bootloader.
Can anyone give a quick lowdown on all the steps required to install that ROM please?
Hi everyone, I discovered that Elephone Trunk and Smart Prime 6 have (almost) identical specs: https://www.devicespecifications.com...ison/c584481c6
So it would be great to "port" (or build ?) the official Nougat-OmniROM for Trunk to VF-895N: http://dl.omnirom.org/trunk/
Last but not least, here's official Vodafone Smart Prime 6 sources: Vodafone_Smart_prime_6_20150413.tar.xz
TWRP for vodafone smart max 4 990N (coolpad 8890u).
I tried this recovery image for vodafone smart max 4 990N (coolpad 8890u).
The phone is in a bootloop state. I think i have usb debugging enabled already.
So, in fastboot mode i can see the device in my pc in adb fastboot cmd.
Im trying to ''fastboot boot recovery.img" but it stops in ''booting..''.
Dont know whats the problem but for sure i can not find a specific twrp image for this device.
If i enter fastboot oem device-info it says ''(bootloader) Device unlocked: true''.
Any ideas ?
hi i was wondering if you could share how you did this or if you can make one for the Vodafone smart n9 (VFD720) it would help a lot of people out looking for this
Needed to root a Vodafone Smart Prime 6 (VF 895N) (got it from a friend because it became unresponsive from all the updated google play stuff ) to get linux-deploy running. Just wanted to leave a big thank you here for Adreno306 for his TRWP 3.0.0-0. it did the job very well!
Only the procedure to get it installed differed quite a bit for me, since Flashify is no longer available.
I wanted to preserve boot and just flash trwp to recover, what worked quite well.
The first thing I did was to boot the phone manually in recovery mode (Power+Vol up) and reset it to factory settings from there. It takes a little while. Then follow the setup, go to phone settings, enable developer mode and set usb debugging. If "unlock oem" is not available there, reboot into recovery again, set unlock there and reboot into bootloader.
The prerequisites are adb and fastboot, both must work. Means adb devices and fastboot devices must show the phone. What can make problems under win10 as it sometimes does not detect the phone in bootloader mode. An actual google usb driver is needed, as provided by google.
For me adb worked well, but when rebooted into bootloader with adb reboot bootloader, fastboot didnt detect the phone. With the phone still connected, the windows device manager showed an unknown device with and exclamation mark (!). Right click, install driver, select driver manually, select driver from device list, mark all devices (first entry) and click "disk", then point to the usb driver director and select "ADB fastboot driver". ( A more comprehensive description is available here )
Once adb and fastboot detect the device, it is time to prepare it. Boot to system (normal operation) first. Make sure that the TRWP 3.0.0-0.img is renamed to trwp.img and then
adb reboot bootloader
fastboot devices
fastboot oem unlock
fastboot boot trwp.img
Now the phone should show the trwp menu, set it up to root the phone and install SuperSU. Reboot into bootloader and
fastboot flash recovery trwp.img
fastboot reboot
Verify with adb reboot recovery, you should see trwp now. Reboot to system.
Now finally go into the app selector, start SuperSU, and root the phone. SuperSu uses trwp recovery mode to install its image and root is done.
Again, big thanks for providing the TRWP image!
Adreno306™ said:
Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
How to install
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.
Click to expand...
Click to collapse
Hi, I would like to try your tutorial but I can't root this phone (which is an important step in the tutorial), is there any way someone could help me??
Thanks
Hello xda developers this is my second thread sorry for the first one that i made yesterday, I am having a problem with my lenovo k4 note a7010a48
after rooting successfully I proceed to flash rr 7.1.2 but did not flash the gapps now my problem is how to go back on recovery mode to start over again
I already used the power button followed by the volume up down buttons but it is not working like before it is nougat. I only need to get to recovery mode. Please help and thankyou in advance. More power
Does u have root access now and which version of rr u flashed
yes the phone is rooted already and flashed with rr 7.1.2 only need to open recovery mode which is I have no idea
Contact in telegram app 9032015333 I will tell u
i dont know that or how to do that can you teach me please thank you
I have the same issue. Can't enter into recovery and the phone is unable to start.
Same Issue || Don't Know How To Fix
Hi,
I am searching for a possible solution from a day. But could not find a working solution.
After successfully flashing RR-N-5.8.5 (Android N)
Unable to go into recovery.
PROBLEM DESCRIPTION:
1. When Press Vol Up + Vol Down + Power Up
2. Recovery is not loading up
3. Instead it goes in boot loop
4. Normal boot mode and fast boot mode are working perfectly fine
SOLUTIONS TRIED:
1. Flashing recovery again using fastboot mode
2. Flashing different recovery, i.e updated version of recovery
As all recoveries which were available were for marshmallow version. I am not sure but have doubt as android version is updated so the kernel so do recovery also become obsolete in this case ?
Any help is welcome and appreciated
Thanks
---------- Post added at 05:18 PM ---------- Previous post was at 05:12 PM ----------
jaineshjain said:
Contact in telegram app 9032015333 I will tell u
Click to expand...
Click to collapse
Whole concept of this platform is sharing your knowledge
Don't you think it would be better if you discuss here itself ?
jaineshjain said:
Contact in telegram app 9032015333 I will tell u
Click to expand...
Click to collapse
Whole concept of this platform is sharing your knowledge
Don't you think it would be better if you discuss here itself ?
for fastboot mode and for recovery mode yes i tried it also but thats the problem no recovery mode. I will wait for the solution when it comes i will just store my phone for a while.
Hi Developers,
Is it possible to reset the phone at hardware level? I can't even connect the phone to PC as it keeps on rebooting.
Please note: upgraded to Nougat and wanted to do the second recovery as suggested by mohancm in the post. When the phone rebooted (before flashing the second recovery), the problem started.
Please let me know if any one has a fix/workaround for the issue.
Thanks,
Srihari
1.Download TWRP recovery unzip files.
https://drive.google.com/file/d/0B1CKVcdcbHFPUzFCODVMN0ZfTW8/view
2.Now in folder TWRP\img\ there is the file recovery.img.
3.Download the second recovery for nougat recovery-Nougat.img and put in the TWRP\img folder.
https://androidfilehost.com/?fid=673368273298981920
4.Rename it as the original, recovery.img and replace it.
5.Then connect your phone to usb and select the 3th option from usb debugging message
"Transfer photos(ptp)"
6.run TWRP_Install.bat from TWRP folder
And you are done, had the same problem and I figure this solution, hope it will help.
I cannot locate the transfer photos(ptp)
ok I already done the part I am now on the recovery mode thanks. new problem of mine is after flashing the rom gapps and recovery after reboot it goes back to recovery mode did I miss something on flashing?
ok so i already passed this problem thanks for the help xda community thank you very much but I have this bootloop problem maybe I did a mistake flashing before rebooting sorry i am a noob in this kind of upgrade specially in mobile phones. I will be careful next time after I passed this problem I hope you will help me once again, my phone in bootloop is killing me.
I have same issue... I flashed gapps and my phone is working smoothly... The issue is i can't go into recovery mode... I tried some one tap reboot to recovery apps but all whats happening is phone restarting normally.
For those who can't access recovery mode. You were supposed to flash updated recovery image after flashing rrn rom.
Enter into fastboot mode by using adb shell.
Flash the updated recovery image
Now try rebooting into recovery.
Should work.
Worst case, restore by flashing stock rom using SP flash tools. And then start all over again.
If you face any issues ping me. Even I had faced this issue and fixed it after a lot of struggle. I can try to help you.
Or you could download Official Twrp App directly from play store, then find A3000 (Air Row) in 'select device' and flash that to recovery, (if your phone is rooted) then you are good to go, go to recovery mode and thats all, your twrp is now has been flashed.
Thank me later??
MisledMew said:
Enter into fastboot mode by using adb shell.
Flash the updated recovery image
Now try rebooting into recovery.
Click to expand...
Click to collapse
This really worked for me. Many thanks man.
Well it got me some time to find the right recovery image for my ROM so I decided to give you link for anyone going through the same.
My configuration at that time was: DotOS 1.2 and TWRP 3.1.1 (or so).
On the DotOS thread was enclosed link to wrong recovery image file (or its version was changed as of 28.12.2018) but after small investigation I found this file recovery-mohan-N.img.
Note: This recovery worked for TWRP and Android Nougat and I'm not an expert to suggest this will work for your case either.
Thank you again and have a nice time
firelmnt said:
This really worked for me. Many thanks man.
Well it got me some time to find the right recovery image for my ROM so I decided to give you link for anyone going through the same.
My configuration at that time was: DotOS 1.2 and TWRP 3.1.1 (or so).
On the DotOS thread was enclosed link to wrong recovery image file (or its version was changed as of 28.12.2018) but after small investigation I found this file recovery-mohan-N.img.
Note: This recovery worked for TWRP and Android Nougat and I'm not an expert to suggest this will work for your case either.
Thank you again and have a nice time
Click to expand...
Click to collapse
Glad it helped
Hi guys,
First, English isn't my first language so, sorry if it hurts your eyes :/
Second, I'm new to TWRP / root etc... (since yesterday) and I don't fully understand the exact meening of all words like flash / rom etc...
So: I'm actually blocked in the "Your device can't be checked for corruption. Please lock the bootloader". Apparently it's a normal screen now, when we boot we always see this. OK ( at least that's what I read)
My volume keys aren't doing anything and I can't access my phone anymore.
I can access TWRP if I want.
Thx for responding :good:
Adb & fastboot still recognize your device ?
If yes flash twrp as recovery with fastboot and boot into it with fastboot.
coremania said:
Adb & fastboot still recognize your device ?
If yes flash twrp as recovery with fastboot and boot into it with fastboot.
Click to expand...
Click to collapse
How can I know if ADB recognize my phone?
I can access TWRP so I don't need to flash it again ? Is there a difference between just flash TWRP and flash TWRP with fastboot ?
Sry, my bad, i miss read that you can access twrp, sry, I thought you can't, what happens if you flash a rom, which twrp is installed, what were your steps that you end stuck on bootloader message ?
Edit: if your issue is that you don't know how to start flashing, read the Los thread and follow the op.
Instructions:
1. Install the Universal bootloader and your model specific modem.Failure to do so will not allow flashing the ROM!
2. Update recovery [Recommended -> Official TWRP for Axon7
3. Factory reset if coming from another ROM.
4. Install ROM
5. Install GApps (optionally) [Recommended -> Open GApps (arm64) (7.1) 2017-02-01 or Newer
Download all files from the thread and put them on to your microsdcard, if your twrp is up to date you don't have to do this again. Flash the zip files in the order of the instructions, just press install at twrp and choose the zips, you can add multiple and flash them together.
Man, trust me, I'm not a lazy man and all I want is to have my phone back even if it's stock
I don't understand what you're trying to make me do, sincerely
If you can give me a link where I can have a guide steps by steps or make this guide for me that would be the best thing of my day...
... I really need to wait wtf
update: I wipe all my phone data
I no longer have TWRP installed but the "basic" android recovery
(with those option when you start it:
Reboot system now
reboot to bootloader
apply update from adb
.
.
.
Power OFF)
I'm such a **** wtf
I really don't know your issue, except you seem not to read enough. What guide you want ? How I flash a custom rom to my phone ? How to use twrp ?Why you unlocked your bootloader ? How did you manage to have the stock recovery back ?
I have to guess what you want and what you already did . If you need a guide, here are severals in the guide section.
https://forum.xda-developers.com/axon-7/how-to
TheGreatNarchy said:
... I really need to wait wtf
update: I wipe all my phone data
I no longer have TWRP installed but the "basic" android recovery
(with those option when you start it:
Reboot system now
reboot to bootloader
apply update from adb
.
.
.
Power OFF)
I'm such a **** wtf
Click to expand...
Click to collapse
So you are stuck with stock recovery and not TWRP? If so I would find a guide to "flash" or install TWRP in what is called EDL mode.
If you can do that, you then need to:
boot directly into TWRP and wipe dalvik, system, data, and cache.
Then install universal boot loader and modem for your device. (A2017G)
Next install latest TWRP img found on https://TWRP.me
And lastly reboot into recovery again and install Rom (version of Android you want to try) and any other modifications you want (kernel, gapps, magisk, etc.)
If you have any questions don't be afraid to ask. Good luck!
JTruj1ll0923 said:
So you are stuck with stock recovery and not TWRP? If so I would find a guide to "flash" or install TWRP in what is called EDL mode.
If you can do that, you then need to:
boot directly into TWRP and wipe dalvik, system, data, and cache.
Then install universal boot loader and modem for your device. (A2017G)
Next install latest TWRP img found on https://TWRP.me
And lastly reboot into recovery again and install Rom (version of Android you want to try) and any other modifications you want (kernel, gapps, magisk, etc.)
If you have any questions don't be afraid to ask. Good luck!
Click to expand...
Click to collapse
What? You can flash the ROM after flashing the universal bootloader, then also flash TWRP via itself, and you'll stay on the latest...
Rebooting without a ROM is bad. just bad. even rebooting to recovery. that's how i got my dfu brick
Choose an username... said:
What? You can flash the ROM after flashing the universal bootloader, then also flash TWRP via itself, and you'll stay on the latest...
Rebooting without a ROM is bad. just bad. even rebooting to recovery. that's how i got my dfu brick
Click to expand...
Click to collapse
I am not 100% sure what you are saying. But yeah, sure. Flash the Rom after the universal bootloader and modem. Then flash twrp. Then reboot.
If you think that is better for OP then that works. I haven't ever had the problem of rebooting to recovery without a rom installed but you're right that it probably is safer.
I only suggested that because the TWRP that comes with the real old universal bootloader on LOS thread is also very old. So, flashing a rom with the new version I thought would be best to avoid errors. Thanks!
JTruj1ll0923 said:
I am not 100% sure what you are saying. But yeah, sure. Flash the Rom after the universal bootloader and modem. Then flash twrp. Then reboot.
If you think that is better for OP then that works. I haven't ever had the problem of rebooting to recovery without a rom installed but you're right that it probably is safer.
I only suggested that because the TWRP that comes with the real old universal bootloader on LOS thread is also very old. So, flashing a rom with the new version I thought would be best to avoid errors. Thanks!
Click to expand...
Click to collapse
The thing is, after you flash the universal bootloader, the TWRP on the sd gets replaced. but the TWRP that you are using is loaded in RAM. So even if you install a TWRP version you'll stay in the version you flashed before until you reboot. If you install the universal bootloader and then install the TWRP img you'll keep everything as-is on the next reboot. I discourage rebooting without a system especially on a G because any interruption might lock the phone in DFU. On an a2017U that wouldn't be a problem because the phone boots into edl if any software error is present
Hello
today I got an update for MIUI 11 by OTA, I press agree for "UPDATE", my phone restarted to TWRP, it's Installed some files for update, after finished that my phone keep restarting to TWRP recovery again (LOOP)
I tried to download official rom and install by TWRP ,but after finish and restart device still rebooting to TWRP recovery
is there any solution for not losing my data ?
BTW : flash stock rom didn't remove TWRP recovery , why ?
(I download rom from xiaomifirmware [dot] com)
I am not expert on that field but from my knowledge try booting twrp and copy all your files to your pc or laptop (the one you need at least for saving some photos or videos ) then flash a fastboot ROM
And as I said from my knowledge not sure there might be other ways
testemailmailx said:
Hello
today I got an update for MIUI 11 by OTA, I press agree for "UPDATE", my phone restarted to TWRP, it's Installed some files for update, after finished that my phone keep restarting to TWRP recovery again (LOOP)
I tried to download official rom and install by TWRP ,but after finish and restart device still rebooting to TWRP recovery
is there any solution for not losing my data ?
BTW : flash stock rom didn't remove TWRP recovery , why ?
(I download rom from xiaomifirmware [dot] com)
Click to expand...
Click to collapse
Your phone was on a custom ROM but you didn't know it? oO
No Official ROM will boot and auto-install in TWRP...
Try to clear "Dalvik/Cache" and if still not booting then you will need to "Format Data" in TWRP (loose data).
If still not working, flash a fastboot image...
Micdu70 said:
Your phone was on a custom ROM but you didn't know it? oO
No Official ROM will boot and auto-install in TWRP...
Try to clear "Dalvik/Cache" and if still not booting then you will need to "Format Data" in TWRP (loose data).
If still not working, flash a fastboot image...
Click to expand...
Click to collapse
No it’s official rom miui 10
I clear theme many times even when install stock rom by twrp but still looping after appear xiaomi logo (andriod logo never shows)
testemailmailx said:
No it’s official rom miui 10
I clear theme many times even when install stock rom by twrp but still looping after appear xiaomi logo (andriod logo never shows)
Click to expand...
Click to collapse
Maybe it's a miui.eu or a different region ROM that was installed as .zip so it still appear as mi/redmi logo
batman957 said:
Maybe it's a miui.eu or a different region ROM that was installed as .zip so it still appear as mi/redmi logo
Click to expand...
Click to collapse
Installed from xiaomifirmware site
Is there any opportunity to fix phone ?
testemailmailx said:
Installed from xiaomifirmware site
Is there any opportunity to fix phone ?
Click to expand...
Click to collapse
Try flashing the fastboot ROM the .tgz one not the .zip using miflash but try to use the miui 10 one and later on update (getting the phone to work is more important right now )
batman957 said:
Try flashing the fastboot ROM the .tgz one not the .zip using miflash but try to use the miui 10 one and later on update (getting the phone to work is more important right now )
Click to expand...
Click to collapse
I could make it work easily, but I want keep that step as final step cuz will wipe everything
testemailmailx said:
I could make it work easily, but I want keep that step as final step cuz will wipe everything
Click to expand...
Click to collapse
Then if you can fully boot to twrp try to connect it with an otg or to pc and copy Ur files
It happened to me once btw I deleted the system partition(first time flashing) ? then I flashed the fastboot ROM
If I was in Ur place I would never flash any custom ROM to trigger the anti rollback or lose widevine l1
You may try but be careful of going through wrong things such as edl mode
batman957 said:
Then if you can fully boot to twrp try to connect it with an otg or to pc and copy Ur files
It happened to me once btw I deleted the system partition(first time flashing) then I flashed the fastboot ROM
If I was in Ur place I would never flash any custom ROM to trigger the anti rollback or lose widevine l1
You may try but be careful of going through wrong things such as edl mode
Click to expand...
Click to collapse
God bless us
I’m not using custom rom at all
BTW is there any way to delete twrp recovery without delete system ?
Did you by any chance flashed with the greek TWRP? I got the same bootloop so I get back to miui 10 official global version (the one I updated from) and it booted alright without wipe needed...
I'll try other TWRP versions as well though but right now I don't think I wanna update :|
Yup you should disable disable dm verity and verification
just flash this using fastboot and you're good to go, I am now running official miui 11 without wiping the data.
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
https://gofile.io/?c=fgyAB3
sijav said:
Yup you should disable disable dm verity and verification
just flash this using fastboot and you're good to go, I am now running official miui 11 without wiping the data.
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
https://gofile.io/?c=fgyAB3
Click to expand...
Click to collapse
Hey,
The file you mentioned is not founded! could you please re upload it somewhere ?
m-Khadem said:
Hey,
The file you mentioned is not founded! could you please re upload it somewhere ?
Click to expand...
Click to collapse
Here is patched vbmeta for davinci (K20/Mi 9T) => https://drive.google.com/file/d/1IC78J20ovcZudWYlijgSGdjeP6D3hx2V/view?usp=sharing
hello everybody
I was on the Android version 10 global version 11.0.4 ,I decided to download ExtendedUI OFFICIAL ROM, the bootloader was unlocked, then I Installaled the recovery , so i waiped system ,chash and date
by mistake i restart my phone , when i did that every thing is gone and the only thing that works is fastboot .
i tried everything nothing is worked .
please guys help me what should i do?:crying:
abood.mhd said:
hello everybody
I was on the Android version 10 global version 11.0.4 ,I decided to download ExtendedUI OFFICIAL ROM, the bootloader was unlocked, then I Installaled the recovery , so i waiped system ,chash and date
by mistake i restart my phone , when i did that every thing is gone and the only thing that works is fastboot .
i tried everything nothing is worked .
please guys help me what should i do?:crying:
Click to expand...
Click to collapse
Reflash the official twrp and flash the extended ui ROM. It isn't bricked
This happenned to me too.
If you can't boot or flash twrp via fastboot in this state (It wouldn't work for me), download and flash the fastboot ROM for your device and use the flash_all script (careful NOT to use flash_all_lock!!!!!). It'll go back to stock and keep the bootloader unlocked so you can flash TWRP and start over.
Benfatica said:
Reflash the official twrp and flash the extended ui ROM. It isn't bricked
Click to expand...
Click to collapse
how can i do that?
ShiningScias said:
This happenned to me too.
If you can't boot or flash twrp via fastboot in this state (It wouldn't work for me), download and flash the fastboot ROM for your device and use the flash_all script (careful NOT to use flash_all_lock!!!!!). It'll go back to stock and keep the bootloader unlocked so you can flash TWRP and start over.
Click to expand...
Click to collapse
can you please tell me exactly how to do this ? whech app is that?
thank you guys i did it lol