Hello I'm on 5.1.1 lollipop on my s6 edge plus I haven't got a marshmellow update yet but my battery drains crazy fast, I've looked online and I'm not the only one, people say that tripping knox makes it drain battery, I've rooted this phone and installed a new kernel and it tripped my knox, is there anyway I can revert that so there is no knox trips?
Even Knox is tripped, there is no way back at the moment. Butter the problem is known - just install a custom kernel like skighhigh, there is a fix included
Gesendet von meinem SM-G928F mit Tapatalk
---------- Post added at 12:08 PM ---------- Previous post was at 12:08 PM ----------
*But
Gesendet von meinem SM-G928F mit Tapatalk
This is deep sleep isue. To fix this you need a recovery file of the s6 edge plus. I search for it but i dont find it. If anybody can send the file to flash over odin i appreciate. Thanks :highfive:
Related
Hello!
I have a S4 i9505. It's rooted and it runs a FoxHound rom 4.3 based.
Now that the new kitkat has officially come out, I would like to update to the official firmware using odin etc etc.
I looked up in download mode and I have 0x1 flag in KNOW WARRANTY VOID.
Now my question is: can I install from odin the official 4.3 firmware in this status? or will I get it unfunctional?
I don't know if this question is common or not, but, as I've seen a mess reguarding Knox troubles, I decided to ask directly.
Thanks a lot.
You can flash it without problems. If you have problems then flash modem + bootloader also
Gesendet von meinem GT-I9505 mit Tapatalk
ahhhh my gosh I read again the message and I found out I wrote something stupid;
my question is can I install 4.4 with Odin ? is the problem on the eventual downgrade?
thanks a lot and sorry for that
Actually i read 4.4.2 so my post is based on that yes you can install 4.4.2 via odin. You may encounter wifi issues or lockscreen issues, then you have to flash the matching bootloader and modem
Gesendet von meinem GT-I9505 mit Tapatalk
Hello guys, i recently bought Galaxy S4 i9505, and i updated it to stock 4.4.2 Kitkat. I read some threats about new KNOx security, witch wont allows us to flash rom's and re-flash stock to phones without voiding the warranty. So i wondered, is the flashing process is same as was before security update? Or i have to do something special? I want to root->install cwm->flash CM. Will i have problems with these things? I don't care about warranty.
No you will not have problems. if you dont care about warranty then you can ignore the knox stuff.
Gesendet von meinem GT-I9505 mit Tapatalk
benni2903 said:
No you will not have problems. if you dont care about warranty then you can ignore the knox stuff.
Gesendet von meinem GT-I9505 mit Tapatalk
Click to expand...
Click to collapse
So i can instal ordinary roms and stuff? I wont brick my device if i try to change kernels?
ZenMax said:
So i can instal ordinary roms and stuff? I wont brick my device if i try to change kernels?
Click to expand...
Click to collapse
As long as you follow the instructions precisely, you won't.
But be careful with things of ODIN, you may wanna double and triple check things before you hit "start" button
As I understand it now, there are no methods to root without increasing the counter Knox is true?
Thank you so much for the help
If you come from s4 you should know it is the same. If not yes is true.
Gesendet von meinem SM-G900F mit Tapatalk
It seemed to me that it had been found a method to root on note3 said "della vega" which did not increase the counter
And if I'm not mistaken there's still a way to reset the counter when amended
Hello. Is there any way to root Edge+ with newtest android 5.1.1 ??
Yes!
http://forum.xda-developers.com/s6-edge-plus/development/arter97-kernel-galaxy-s6-edge-plus-t3189913
Does it work with ext4 and G928F??
Yes! and Yes!
http://arter97.com/browse/exynos7420/kernel/4.0/g928fci/ FOR G928F
If it works fine wirh ext4, why the guide says that format your partition to f2fs?
Optional
Okay, thanks
Read through the topic, you will get whatever you need!
SM-G928G would be supported soon?
You should ask the dev about that.
New problem....if i try flash custom recovery, my phone says "Custom recovery blocked by FRP lock" so what can i do for that???
Go to Developer Settings, then Enable OEM Unlock.
Is there still issues with warranty with root tripping knox?
I'd love to root but given this is a £850 phone and there are already spontaneous cracking rear glass panels (glass on the back was always a concern for me) I'd hate for something to happen then be f**ked.
It's not a issue. Flashing anything custom using Odin will trip Knox and you will lose guarantee.
sanjaybenjamin said:
SM-G928G would be supported soon?
Click to expand...
Click to collapse
Use the one for the F, C and I varient. It will work.
Hey guys. I want to buy a edge+ and want to root, custom rom and so on... What u guys think has the better development on mod Scene. The "F" or "C" variant?
I don't know which i should buy.
Sorry for my bad English.☺
Gesendet von meinem SM-N910F mit Tapatalk
No one can tell. Both are international models.
god damit...i try flash philz touch recovery but when i try to go in it, my phone goes to normal recovery (odin shows that flash succesful and phone boots but for some reason philz touch just isnt there )
Same here ?
Gesendet von meinem SM-G928F mit Tapatalk
Will this work on the G9287? (dual sim)
Hi.
I need a little help with Xposed, but before I get to what help I need I'll give you a little background info.
I have the Galaxy A3 (A300FU) and it's actually the first smartphone I've ever owned (I know I'm a bit late to the party). When I got it it had kitkat installed which I promptly rooted. I then found out about xposed and installed it and some modules. Recently my carrier, EE, finally released their lollipop upgrade (5.0.2) so I downloaded it from Sam mobile and flashed it over with odin. I then rooted using the method I found here of using the kitkat autoroot and then flashing the correct recovery to get rid of the error it caused. This left me with a working rooted phone running 5.0.2 lollipop however if I turned the phone off while it was charging it automatically rebooted into recovery. I read various ways of fixing this but since I wanted to use the TWRP recovery anyway I went and flashed that too. This also fixed the issue of the phone rebooting into recovery.
Now comes the issue with Xposed. When I had kitkat I installed xposed and a few modules like wanam and everything worked fine. However now I have lollipop it's telling me it doesn't support 64 bit architecture. I looked into this and found a lot of threads that were talking about using an unofficial version of xposed and needing deodexed roms anyway. However when I was using kitkat I was using an odexed rom and I had no issues with it. Also the unofficial xposed that I have found seems to be for 5.1.1 or 5.1.2 not 5.0.2.
Is there a version of xposed that will work on my A300FU running 5.0.2 and if so do I need to deodex my rom first? If so how do I go about doing that? Also could someone tell me why xposed worked with my odexed kitkat rom (I'm just curious about the inner workings) since everything I have read seems to indicate that it shouldn't have worked then either?
Many thanks in advance and sorry for such a long winded beginning I just wanted to explain exactly where I'm at with it and to give an idea of what I've done before so you can get an idea if what I should know how to do.
Thanks again.
I hate to bump but it's been a while since I posted.
Does anyone have any help for me? Really missing some of the things that I used to have with Xposed.
You might give this a shot: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463/ you'll need to deodex first
Gesendet von meinem SM-A300FU mit Tapatalk
prometh696 said:
You might give this a shot: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463/ you'll need to deodex first
Gesendet von meinem SM-A300FU mit Tapatalk
Click to expand...
Click to collapse
I tried to deodex using the TUTO on here but had no success. Just ended up with a bootloop.
Also after doing a little research I have come to the conclusion that because my device is running ARMv7 that it must be 32 bit. However I'm also being told that I'm running 64 bit so I'm a little confused as to whether I should install the 32 bit Xposed or the 64 bit Xposed if and when I manage to deodex my ROM.
I managed to get it running:
http://forum.xda-developers.com/sam...to-5-0-2-xposed-custom-recovery-knox-t3251317
Gesendet von meinem SM-A300FU mit Tapatalk
prometh696 said:
I managed to get it running:
http://forum.xda-developers.com/sam...to-5-0-2-xposed-custom-recovery-knox-t3251317
Gesendet von meinem SM-A300FU mit Tapatalk
Click to expand...
Click to collapse
Thanks. I didn't see that thread when I was looking for a solution.