Rooting problem - Lenovo A6000/Plus Questions & Answers

At a last stage fastboot boot recovery.img .it shows failed and error was "dtb not found". i tried 4-5 times and all times failed with same error.how to solve it!!!

scorpionsbattle said:
At a last stage fastboot boot recovery.img .it shows failed and error was "dtb not found". i tried 4-5 times and all times failed with same error.how to solve it!!!
Click to expand...
Click to collapse
If you are currently on kitkat use this recovery
https://userscloud.com/m4jy6u5chkkp
Otherwise if on lollipop use this
https://userscloud.com/a25aszfwkn2z
Im sure this will surely work but if in any case these wont work you can use the cwm recovery
http://www15.zippyshare.com/v/j9lHGdJf/file.html

scorpionsbattle said:
At a last stage fastboot boot recovery.img .it shows failed and error was "dtb not found". i tried 4-5 times and all times failed with same error.how to solve it!!!
Click to expand...
Click to collapse
I got this error as well during rooting.It means that your recovery is corrupted,nothing to do with version (TWRP 2.8.6 ran fine on stock lollipop).Retry the download..:good:

Related

Do I broke my HD Mini?

Hello,
I have serious problem with my phone. I bought HTC with windows mobile and some time ago I have installed Android from this topic http://forum.xda-developers.com/showthread.php?t=1455555 I chose nand-boot option so windows had been deleted from hard memory. Then 5days ago I decided to do an upgrade of Android. Downloaded new version of Android and tried to install it from old Android, system crashed and I can’t do anything in bootloader know. It's only this message:
nand id: 0x5500bcec maker=0xeo device=0xbc
press VOLUME UP for RECOVERY
press VOLUME DOWN for FASTBOOT
flash_read_image: failed (319 errors)
ERROR: Cannot read recovery_header
flash_read_image: failed (5056 errors)
ERROR: Cannot read kernel image verting to fastboot mode.
ENTERING FASTBOOT MODE
udc_start()
Click to expand...
Click to collapse
When I press Volume Up or Down nothing happens. So I decided back to windows but I have problem with install it. When I try to install original ROMs have this ERROR 294 -> Invalid vendor id. When try to install custom ROM with using SSPL I have other ERROR [262] -> Update error. I tried to installation from SD card but nothing happens in 3 colors bootloader.
Please help me…
http://forum.xda-developers.com/wiki/RUU_Errors#ERROR_.5B294.5D_:_INVALID_VENDOR_ID
are you sure you followed the steps correctly when you tried to install from sd card?(explain what you did and nothing happened)
tzacapaca said:
http://forum.xda-developers.com/wiki/RUU_Errors#ERROR_.5B294.5D_:_INVALID_VENDOR_ID
are you sure you followed the steps correctly when you tried to install from sd card?(explain what you did and nothing happened)
Click to expand...
Click to collapse
Hi I've the same problem, I don't know what to do, is there anyone who has got an hint?
I cannot reinstall the ROM because the damn INVALID VENDOR, I canno use SSPL_RUU.exe as suggested in this forum because it must be run from WM and not from the coloured strips screen..
is there a solution? please!
you should try your original WM ROM, or for android these aren't any problem.. it's because bad installation,
i broke my bootloader too. cant enter recovery or something else. someone an idea? :/
reinstall recovery from windows>usb>htcHDmini

Stucked on dead android robot with red exclamatory mark...

i'm using zenfone 5 (A501CG/T00F)...
my zenfone 5 was in bootloop and then i tried to install fw 3.24.40.78 when i was on fw 3.24.40.87... i tried .78 bcoz .87 is giving error "failed to verify whole-file signature"... and .78 is verified upto 54% and after that handset is restarting and stucked on android dead robot with red exclamatory mark and giving the error in cmd "*failed to read command*"... and now i'am UNABLE to reach fastboot mode...
PLEASE give me the Solution to solve this problem...
THNX...
First, make sure that you use the right version of adb
Second, you need a proper recovery version to sideload those 2. Get the recovery file from here, flash and sideload again

Big Trouble, phone bricked no solution found...

Hello!
I am a new to this forums so bare with me please
i have bricked my phone badly.., i tried to install the ota update for P10 Plus (VKY-L29C432B123) with FlashFire and in the middle of the update the phone went black and my problems began getting worse.
i rebooted the phone and got into Error mode Func No: 11 (recovery image) and Error No: 2 (boot faild in recoveryboot mode!).
so i followed a guide and reinstalled twrp to attemp to restore the system somehow, so i kept following the guide and i went into twrp --> wipe --> format data and here my real problems began..
i did many attemps to install any firmware both stock and roms but i got into system mount problem and i can't do anything to transfer files to system i have tried adb but it can't find my device, tried adb sideloaded doesn't work eaither.
so i am stuck in no where..
the phone and frp are unlocked.
but i have missed to enable USB debugg mod
so now i wonder if there is any solution for me in this case?
greatly thankfull if anyone can help me with this big mess.
Try this https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page47
gm007 said:
Try this https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page47
Click to expand...
Click to collapse
Thanks i had already checked that thread.
i solved the problem by restoring the stock recovery and used eRecovery and funkyhuawei to download firmware and it just went perfectly.
forati89 said:
Thanks i had already checked that thread.
i solved the problem by restoring the stock recovery and used eRecovery and funkyhuawei to download firmware and it just went perfectly.
Click to expand...
Click to collapse
You can use that HWOTA method to recovery FullOTA rom no need to use FunkyHuawei.
forati89 said:
Hello!
I am a new to this forums so bare with me please
i have bricked my phone badly.., i tried to install the ota update for P10 Plus (VKY-L29C432B123) with FlashFire and in the middle of the update the phone went black and my problems began getting worse.
i rebooted the phone and got into Error mode Func No: 11 (recovery image) and Error No: 2 (boot faild in recoveryboot mode!).
so i followed a guide and reinstalled twrp to attemp to restore the system somehow, so i kept following the guide and i went into twrp --> wipe --> format data and here my real problems began..
i did many attemps to install any firmware both stock and roms but i got into system mount problem and i can't do anything to transfer files to system i have tried adb but it can't find my device, tried adb sideloaded doesn't work eaither.
so i am stuck in no where..
the phone and frp are unlocked.
but i have missed to enable USB debugg mod
so now i wonder if there is any solution for me in this case?
greatly thankfull if anyone can help me with this big mess.
Click to expand...
Click to collapse
could you tell me how did you get rid of this error message? im not able to boot into the bootloader, or not completely because the device is not recognized in fastboot.. everytime i turn it off, it turns automatically on and end in, it looks like the bootloader, but with that two error messages, so im not able to do anything..
m_adnan said:
could you tell me how did you get rid of this error message? im not able to boot into the bootloader, or not completely because the device is not recognized in fastboot.. everytime i turn it off, it turns automatically on and end in, it looks like the bootloader, but with that two error messages, so im not able to do anything..
Click to expand...
Click to collapse
To boot into bootloader mode you have to plug the usb and hold volume down while booting.
gm007 said:
To boot into bootloader mode you have to plug the usb and hold volume down while booting.
Click to expand...
Click to collapse
i try that so many times.. but it doesn't work.. as soon as the phone has power, im not able to turn it off.. it start automatically again, and i can press what ever i want, vol down power (with/without usb), vol up power, it always ends in the same:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
m_adnan said:
i try that so many times.. but it doesn't work.. as soon as the phone has power, im not able to turn it off.. it start automatically again, and i can press what ever i want, vol down power (with/without usb), vol up power, it always ends in the same:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
Click to expand...
Click to collapse
That's a big problem if you can't access fastboot or erecovery.
Seems you messed up the 2 recoveries.
gm007 said:
That's a big problem if you can't access fastboot or erecovery.
Seems you messed up the 2 recoveries.
Click to expand...
Click to collapse
yes it looks like.. i mean, it wouldn't be a problem to flash recovery again, but i can't get the device to boot into the bootoader so i can work with fastboot..
m_adnan said:
yes it looks like.. i mean, it wouldn't be a problem to flash recovery again, but i can't get the device to boot into the bootoader so i can work with fastboot..
Click to expand...
Click to collapse
Maybe you still have twrp installed?
Volume up + power without connecting usb.
gm007 said:
Maybe you still have twrp installed?
Volume up + power without connecting usb.
Click to expand...
Click to collapse
already tried, but without success.. it always end in that error mode..
forati89 said:
Thanks i had already checked that thread.
i solved the problem by restoring the stock recovery and used eRecovery and funkyhuawei to download firmware and it just went perfectly.
Click to expand...
Click to collapse
how you managed to restore stock recovery? with frp only reading is allowed in fastboot i thought?
same probs here with my p10 vtr-l09 but cant get to one of the recoverys .. how can i tell the frp lock that everything is fine with my fastboot commands?
Sent from my HUAWEI HUAWEI GRA-L09 using XDA Labs
hi, did you manage to solve this problem?

Bricked P9 Lite?

Hello,
I have a problem that I can flash TWRP wich works fine. I can go to fastboot. But however I am not able to install any ROMs. Tried Lineage 14.1 and Stock rom.
I tried to flash stock recovery and tried to flash it back by "dload" method - error "Package firmware is not compatible" and when I tried to flash Lineage 14.1, everything seemed fine until boot logo where I was stuck for half an hour before I gave up. Also I am not sure but I think I havent managed to root my phone - tested with "adb shell su" wich gives error messages.'
Even tried hisuite recovery but it said that my phone is not supported.
Tried erecovery wich said "Getting package info failed"
I also can enter stock recovery
Im also getting
Failed to mount /vendor (invalid argument) in olddroid TWRP
and when trying to flash system I get FAILED (remote: sparse flash write failure)
So basically only thing I can do is be in TWRP without root, fastboot and stock recovery.
I have european VNS-21. Used to have stock nougat with EMUI 5.0
Any ideas how to get back any kind of rom?
Edited original post instead of posting new replies. Sorry. Dont know how to delete.

My P10 Plus bricked

When I booting my phone she is in ERROR MODE.
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
I can't go to recovery too the result is same normal booting but I still can boot into fastboot mode and I try to flash stock recovery or TWRP but it doesn't work.
What should I do now? :crying:
Thanks.
you need copy sdcard dload-> update.app your firmware stock
you need battery drain 0% if dead battery still hold power more than 2 mins then plug charging less than 1% and final hold both vol up+down power charging ac
Gamkutopolowk said:
you need copy sdcard dload-> update.app your firmware stock
you need battery drain 0% if dead battery still hold power more than 2 mins then plug charging less than 1% and final hold both vol up+down power charging ac
Click to expand...
Click to collapse
I'll try that If any progress I'll update soon.
Thanks for ANS
H4ckzTh said:
When I booting my phone she is in ERROR MODE.
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
I can't go to recovery too the result is same normal booting but I still can boot into fastboot mode and I try to flash stock recovery or TWRP but it doesn't work.
What should I do now? :crying:
Thanks.
Click to expand...
Click to collapse
Same thing happened to me and i solved this problem by using hwota method. If you were in 7, you can use this topic:
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page13
If you were in 8
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
Good luck
Gamkutopolowk said:
you need copy sdcard dload-> update.app your firmware stock
you need battery drain 0% if dead battery still hold power more than 2 mins then plug charging less than 1% and final hold both vol up+down power charging ac
Click to expand...
Click to collapse
@Gamkutopolowk Ok, I use this method and I'm stuck at "Your device is booting now".
Mr.Legend said:
Same thing happened to me and i solved this problem by using hwota method. If you were in 7, you can use this topic:
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page13
If you were in 8
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
Good luck
Click to expand...
Click to collapse
@Mr.Legend Yeah I'm in 8 and I run Replace_Recovery.bat to flash TWRP successfully but like I said I can't boot into recovery I don't know why.
I think if recovery work it'll be easier to bring she back.
It possible to flash entire rom via fastboot like nexus phone?
H4ckzTh said:
@Gamkutopolowk Ok, I use this method and I'm stuck at "Your device is booting now".
@Mr.Legend Yeah I'm in 8 and I run Replace_Recovery.bat to flash TWRP successfully but like I said I can't boot into recovery I don't know why.
I think if recovery work it'll be easier to bring she back.
It possible to flash entire rom via fastboot like nexus phone?
Click to expand...
Click to collapse
Stuck at the same point
@H4ckzTh did you manage to fix your phone?
tarekeldeeb said:
Stuck at the same point
@H4ckzTh did you manage to fix your phone?
Click to expand...
Click to collapse
Not yet, but I have already bought the new one.
And I find the solution using this program, link here. Maybe It's work.
Goodluck
H4ckzTh said:
Not yet, but I have already bought the new one.
And I find the solution using this program, link here. Maybe It's work.
Goodluck
Click to expand...
Click to collapse
Mm.. I cannot afford to buy a new one .. still struggling to bring it back.
I installed the Huawei Multi Tool >> Unbrick , added 4 images (skipping userdata.img), the tool states that all images are flashed successfully.
When I rebooted, got the same error
When I booting my phone she is in ERROR MODE.
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
Click to expand...
Click to collapse
How can I re-flash the eRecovery? I need to try the dload method with Update.app
Any help is appreciated.
tarekeldeeb said:
Mm.. I cannot afford to buy a new one .. still struggling to bring it back.
I installed the Huawei Multi Tool >> Unbrick , added 4 images (skipping userdata.img), the tool states that all images are flashed successfully.
When I rebooted, got the same error
How can I re-flash the eRecovery? I need to try the dload method with Update.app
Any help is appreciated.
Click to expand...
Click to collapse
you have different model region? or rebrand ?
H4ckzTh said:
When I booting my phone she is in ERROR MODE.
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
I can't go to recovery too the result is same normal booting but I still can boot into fastboot mode and I try to flash stock recovery or TWRP but it doesn't work.
What should I do now? :crying:
Thanks.
Click to expand...
Click to collapse
Use this method:
https://forum.xda-developers.com/p10-plus/how-to/unbrick-upgrade-huawei-p10-plus-android-t3818725
Gamkutopolowk said:
you have different model region? or rebrand ?
Click to expand...
Click to collapse
No, it's Europe/Middle East. Not changed.
I was trying to apply HWOTA when it brick. The HWOTA script seems to have corrupted partitions 30 and 33. Do you know what images should be flashed on those?
tarekeldeeb said:
No, it's Europe/Middle East. Not changed.
I was trying to apply HWOTA when it brick. The HWOTA script seems to have corrupted partitions 30 and 33. Do you know what images should be flashed on those?
Click to expand...
Click to collapse
Try Huawei MultiTool select tab unbrick check all
Gamkutopolowk said:
Try Huawei MultiTool select tab unbrick check all
Click to expand...
Click to collapse
I've done that, and the tool displayed success. But the problem persists.
Even double tried it, rebooted, same symptoms.
Any clue?

Categories

Resources