Database Users

[NEED HELP]Phone stuck on "Warning:Bootloader Unlocked"...Urgent plz

Hey sombody plz help me to get through this,I installed the OTA then I unlocked bootlocker and installed the custom recovery twrp 2.8.7v2 ....then I tried to install the SuperSU....but after flashed it through twrp,I was stucked at "Warning Bootlocker Unlocked" screen for like 15 min,so then I tried to clear cache and then reboot....But that also not help,Then i tried format all the data and tried to to strt in factory mode.but still stucked at same screen.Now what should I do to get into the phone ?PLz ....its urgent

Well the thing you could do is factory resetting via TWRP or you could download a new ROM like CM 12.1 that you can find in the original android developer section and flash it with TWRP, your phone would boot up now. Keep in mind that you will lose everything.

anks095 said:
Hey sombody plz help me to get through this,I installed the OTA then I unlocked bootlocker and installed the custom recovery twrp 2.8.7v2 ....then I tried to install the SuperSU....but after flashed it through twrp,I was stucked at "Warning Bootlocker Unlocked" screen for like 15 min,so then I tried to clear cache and then reboot....But that also not help,Then i tried format all the data and tried to to strt in factory mode.but still stucked at same screen.Now what should I do to get into the phone ?PLz ....its urgent
Click to expand...
Click to collapse
The same happend to me, you must have installed the wrong SU version, just reflash stock firmware via fastboot and reinstall OTA, then if u wanna root use SuperSU v2.61, hope it helps.

Just flashed the CM12.1 through twrp ,problem is solved in a way.

anks095 said:
Just flashed the CM12.1 through twrp ,problem is solved in a way.
Click to expand...
Click to collapse
facing the same problem...... is flashing CM12.1 gonna solve it ?

praveen1618 said:
facing the same problem...... is flashing CM12.1 gonna solve it ?
Click to expand...
Click to collapse
It will but you should have unlocked bootloader.

praveen1618 said:
facing the same problem...... is flashing CM12.1 gonna solve it ?
Click to expand...
Click to collapse
unlock ur boot-loader first ,then flash cm through fastboot or if u have twrp then copy the cm zip in the sd card and then flash it through twrp.But remember to wipe the system,cache,dalvik cache and data.problem should be gone.

anks095 said:
unlock ur boot-loader first ,then flash cm through fastboot or if u have twrp then copy the cm zip in the sd card and then flash it through twrp.But remember to wipe the system,cache,dalvik cache and data.problem should be gone.
Click to expand...
Click to collapse
Sorry Noob question- when should I wipe the system,cache,dalvik cache and data ?? Before flashing cm 12.1??
And I am currently on mm rooted. And cm12.1 is based on lollypop, will there be any problem if I flash cm12.1?

bablu048 said:
Sorry Noob question- when should I wipe the system,cache,dalvik cache and data ?? Before flashing cm 12.1??
And I am currently on mm rooted. And cm12.1 is based on lollypop, will there be any problem if I flash cm12.1?
Click to expand...
Click to collapse
It will work fine.Backup your current system using twrp and then flash cm12.1.

bablu048 said:
Sorry Noob question- when should I wipe the system,cache,dalvik cache and data ?? Before flashing cm 12.1??
And I am currently on mm rooted. And cm12.1 is based on lollypop, will there be any problem if I flash cm12.1?
Click to expand...
Click to collapse
hope fully there would not be any problem....but in case of going wrong with something you should make a back up with twrp to go back to previous build,and yes ,before flashing any rom, you should wipe your cache ,dalvik cache and data......and system if u need...depends upon you

about moto x stucked while rooting
anks095 said:
Just flashed the CM12.1 through twrp ,problem is solved in a way.
Click to expand...
Click to collapse
i was trying to root moto x play i unlocked bootloader but when i tried to root my phone stuked in WARNING BOOTLOADER UNLOCKED.......... I TRIED WIPE ALL DATA FROM RECOVERY.... i tried some research someone said try to flash cm12.1 with twrp but i dont know hot to do this..... my mob is not connecting with pc plz help me guyz plz contect me at my gmail [email protected] its very urgent......plz tell me what to do step by step

sonubisht said:
i was trying to root moto x play i unlocked bootloader but when i tried to root my phone stuked in WARNING BOOTLOADER UNLOCKED.......... I TRIED WIPE ALL DATA FROM RECOVERY.... i tried some research someone said try to flash cm12.1 with twrp but i dont know hot to do this..... my mob is not connecting with pc plz help me guyz plz contect me at my gmail [email protected] its very urgent......plz tell me what to do step by step
Click to expand...
Click to collapse
first of all, which super su zip u r trying to flash ???? only this super su - "SuperSU-v2.62-3-20151211162651.zip" works on MXP...... after unlocking the boot loader u need to flash first twrp custom recovery...then entering into twrp interface,format the whole internal memory (I m sorry,u have to do that,no other way is possible)...... then put cm12 zip which u want to flash in sd card then flash the zip through twrp....... I guess this way your problem would be solved.....

If u flashed the correct mentioned supersu you should be fine.It happened 3 times also to me.I just press power continuously to power off and then it boots normally.

Please in case of SuperSU do not use 2.62-3 anymore, use 2.79SR3. Both are supposed to work, but 2.79SR3 is newer and has some bugfixes.
Note: The release 2.79 will not work, the detection fix to install systemless for all Moto devices is only integrated in 2.79SR3. 2.62-3 does no detection, it always installs systemless.

that was rom problm
mausv said:
Well the thing you could do is factory resetting via TWRP or you could download a new ROM like CM 12.1 that you can find in the original android developer section and flash it with TWRP, your phone would boot up now. Keep in mind that you will lose everything.
Click to expand...
Click to collapse
that was a rom problem

my phone is not turning on pls help after updating one ota of marshmallow security patch 1 jan

anks095 said:
Just flashed the CM12.1 through twrp ,problem is solved in a way.
Click to expand...
Click to collapse
Is cm12.1 support direct volte calling,.? Or any other custom rom which support volte calls???.

Can't boot into recovery

My N10 with stock 5.1 previously had root with TWRP 2.8.6, but for some reason it recently lost root. In addition, it seems that TWRP has been corrupted because whenever I try to boot into recovery I get a dead bootloader with a red exclamation mart. After I flashed the most recent version of TWRP 3.0.0-1 using "fastboot flash recovery twrp-3.0.0-1-manta.img" (bootloader still unlocked), I still get a dead bootloader when booting into recovery.
Then I flashed back to TWRP 2.8.6, but the problem remains!
How to fix the problem? Thanks!

I hope you can go to bootloader mode... Revert to stock by flashing the factory images and then start over again

nitin.chobhe said:
I hope you can go to bootloader mode... Revert to stock by flashing the factory images and then start over again
Click to expand...
Click to collapse
Thanks!
Just flashed an even older version (2.8.5) of TWRP, and now suddenly it can boot into recovery without any problem. I have also gained root now after flashing SuperSU.
I was planning to flash the most recent version of TWRP (3.0.0-1), and then try out CM13, but for some reason my N10 with stock 5.1 does not like those newer versions of TWRP. Do you know why?

mj56gt said:
Thanks!
Just flashed an even older version (2.8.5) of TWRP, and now suddenly it can boot into recovery without any problem. I have also gained root now after flashing SuperSU.
I was planning to flash the most recent version of TWRP (3.0.0-1), and then try out CM13, but for some reason my N10 with stock 5.1 does not like those newer versions of TWRP. Do you know why?
Click to expand...
Click to collapse
No, I do not konw that. Are you flashing correct version of TWRP made for manta?

nitin.chobhe said:
No, I do not konw that. Are you flashing correct version of TWRP made for manta?
Click to expand...
Click to collapse
I downloaded all the three versions (2.8.5, 2.8.6, and 3.0.0-1) of TWRP I've flashed so far from here:
https://dl.twrp.me/manta/
This is weird. Is it because I didn't have root during the time I flashed 2.8.6 or 3.0.0-1? I thought that flashing TWRP would not require root.
Can I flash CM13 with TWRP 2.8.5? I'll definitely make a Nandroid backup before proceeding.

mj56gt said:
I downloaded all the three versions (2.8.5, 2.8.6, and 3.0.0-1) of TWRP I've flashed so far from here:
https://dl.twrp.me/manta/
This is weird. Is it because I didn't have root during the time I flashed 2.8.6 or 3.0.0-1? I thought that flashing TWRP would not require root.
Can I flash CM13 with TWRP 2.8.5? I'll definitely make a Nandroid backup before proceeding.
Click to expand...
Click to collapse
With nandroid, you are good to go.
Should be possible :fingers-crossed:

nitin.chobhe said:
With nandroid, you are good to go.
Should be possible :fingers-crossed:
Click to expand...
Click to collapse
I did factory reset in TWRP 3.0.0-1 and then flashed CM 13.0-20160309 on my N10 with the dynamic Gapps. Now I get this error Unfortunately Google Play Services Has Stopped. Is it because the default factory reset is not good enough or something else? If it needs a full wipe, what exactly should I wipe, system and data? And after a full wipe, do I need to reflash CM13 or just Gapps?
Thanks!

mj56gt said:
I did factory reset in TWRP 3.0.0-1 and then flashed CM 13.0-20160309 on my N10 with the dynamic Gapps. Now I get this error Unfortunately Google Play Services Has Stopped. Is it because the default factory reset is not good enough or something else? If it needs a full wipe, what exactly should I wipe, system and data? And after a full wipe, do I need to reflash CM13 or just Gapps?
Thanks!
Click to expand...
Click to collapse
Problem solved: Just flashed the pico Gapps, and now everything works fine. For some reason the dynamic Gapps didn't work for me.

mj56gt said:
Problem solved: Just flashed the pico Gapps, and now everything works fine. For some reason the dynamic Gapps didn't work for me.
Click to expand...
Click to collapse
May be there isn't enough space to flash them.
Happy that is working now
Sent from my Nexus 4 using XDA Free mobile app

SuperSU breaks boot?

I just reloaded oxygen 3.1.0 on my device, unlocked and flashed recovery. Everything works fine to this point but as soon as I flash superSu my phone stops booting. I have tried clearing the cache and checked for the recommended version of the superSU zip with the same result. Anyone have any suggestions?

rompup said:
I just reloaded oxygen 3.1.0 on my device, unlocked and flashed recovery. Everything works fine to this point but as soon as I flash superSu my phone stops booting. I have tried clearing the cache and checked for the recommended version of the superSU zip with the same result. Anyone have any suggestions?
Click to expand...
Click to collapse
Which recovery ? Which superSu version ?

SuperSU 2.79
TWRP 3.0.2-2

rompup said:
SuperSU 2.79
TWRP 3.0.2-2
Click to expand...
Click to collapse
There shouldn't be a problem as I've used these versions without any problems.
Try a clean flash (wipe data + cache + dalvik cache) with latest superSu beta(2.79 SR1).

Search for supersu in oneplus forums for oxygen 3.1.0 since normal supersu will break boot.

rompup said:
I just reloaded oxygen 3.1.0 on my device, unlocked and flashed recovery. Everything works fine to this point but as soon as I flash superSu my phone stops booting. I have tried clearing the cache and checked for the recommended version of the superSU zip with the same result. Anyone have any suggestions?
Click to expand...
Click to collapse
Scherzengel said:
To succesfully install the newest Versions of SuperSU you have to install it in systemless mode. If you flash the ZIP it will install it in /system mode, so you have to force the systemless install.
Before you flash the newest Beta SuperSU.zip go to the TWRP terminal and write:
echo SYSTEMLESS=true>>/data/.supersu
Then flash the ZIP.
SuperSU will be installed in systemless mode and your Phone will boot up fine.
Click to expand...
Click to collapse
I found this in another thread and it worked for me. all credit goes to Scherzengel

TWRP Stuck after upgrade to Nougat

Hello everyone,
i just flashed the newest Pure Nexus Rom and everything went fine.
I forgot to flash the SuperSU Zip so i tried to got back into TWRP, but now it stuck.
The System boots normally, only TWRP wont boot.
Anyone had that problem too?

if anyone else has the same issue, here is the answer:
I forgot to erase the userdata or cache.
If you have the same problem use fastboot!
fastboot format cache
fastboot format userdata
Then it should work again.
(Everything on your own risk)

If you dont flah SuperSU asap, TWRP will not stick on reboot (w nougat). That was the issue.

No SuperSU was not the problem.
It happened before i flashed the SuperSU zip.
As far as i know, there is a problem if you upgrade to Nougat and dont format the userdata and cache because of the encryption or sth like that.

kaufikauf said:
No SuperSU was not the problem.
It happened before i flashed the SuperSU zip.
As far as i know, there is a problem if you upgrade to Nougat and dont format the userdata and cache because of the encryption or sth like that.
Click to expand...
Click to collapse
Exactly. It happened before you flashed SuperSU zip. Not flashing SuperSU caused your problem. It needs to be flashed the first time you go into TWRP or you won't be able to boot back into TWRP. The previous poster is correct.

Maybe we talk about different problems
Ive formatted cache and userdata yesterday,
now i can go back into twrp.
(SuperSU is not flashed now).
Just tried it, works perfectly!

kaufikauf said:
No SuperSU was not the problem.
It happened before i flashed the SuperSU zip.
As far as i know, there is a problem if you upgrade to Nougat and dont format the userdata and cache because of the encryption or sth like that.
Click to expand...
Click to collapse
I never, ever flash userdata, and never had an issue.
We can agree to disagree. Either the other poster and I arent understanding your question, or you arent understanding our reply. It's cool, it happens.
But TWRP not sticking is due to not running SuperSU at the end of the install process. It wont stick.

And now i know the misunderstanding!
My sentence was a little bit silly formulated:
It didnt stuck by flashing SuperSU. I just forgot to do that and when i recognized this, i want to boot into recovery. Then i recognized the bootloop.
So SuperSU as itself was not involved. By the way BeansTown wrote in the Thread for PureNexus Rom that you have to format your userdata (normally over TWRP).
Shame on me that i didnt read before start flashing

kaufikauf said:
And now i know the misunderstanding!
My sentence was a little bit silly formulated:
It didnt stuck by flashing SuperSU. I just forgot to do that and when i recognized this, i want to boot into recovery. Then i recognized the bootloop.
So SuperSU as itself was not involved. By the way BeansTown wrote in the Thread for PureNexus Rom that you have to format your userdata (normally over TWRP).
Shame on me that i didnt read before start flashing
Click to expand...
Click to collapse
You should take a look at this post in the official TWRP thread for a clearer reason why.

SlimSnoopOS said:
You should take a look at this post in the official TWRP thread for a clearer reason why.
Click to expand...
Click to collapse
So I followed the guide and updated to 7.1.1 and did the normal "fastboot flash recovery xxx" then "fastboot reboot bootlader" then rebooted it via phone I go to "Recovery" from my phone and I get a screen saying "No Command" I tried to flash twrp-3.0.3-0-angler.img
Did I miss something?

USFguy said:
So I followed the guide and updated to 7.1.1 and did the normal "fastboot flash recovery xxx" then "fastboot reboot bootlader" then rebooted it via phone I go to "Recovery" from my phone and I get a screen saying "No Command" I tried to flash twrp-3.0.3-0-angler.img
Did I miss something?
Click to expand...
Click to collapse
After flashing TWRP from the bootloader, go directly into recovery and flash SuperSU 2.78 or newer to make it stick permanently.
Sent from my Nexus 5X using Tapatalk

SlimSnoopOS said:
After flashing TWRP from the bootloader, go directly into recovery and flash SuperSU 2.78 or newer to make it stick permanently.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
It won't boot into recovery, I flash recovery, unplug device hit recovery boot and it boot loops once then boots normally....

USFguy said:
It won't boot into recovery, I flash recovery, unplug device hit recovery boot and it boot loops once then boots normally....
Click to expand...
Click to collapse
Hmm. If you are on stock, reflash the boot, system, recovery, and vendor from the factory image that matches your stock, security update. Restart the phone and boot into Android. Restart into the bootloader then fastboot flash recovery TWRP-angler.img. See if it lets you boot into TWRP then. If not, try an older version of TWRP and see if that will flash and allow you to boot into it.
Sent from my Nexus 5X using Tapatalk

SlimSnoopOS said:
Hmm. If you are on stock, reflash the boot, system, recovery, and vendor from the factory image that matches your stock, security update. Restart the phone and boot into Android. Restart into the bootloader then fastboot flash recovery TWRP-angler.img. See if it lets you boot into TWRP then. If not, try an older version of TWRP and see if that will flash and allow you to boot into it.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
Tried that, ended up going down an update in TWRP and it worked, weird....

I had a similar issue and I had to go back in and reflash Recovery image to recovery partition and all was well

In need of some help ASAP.

My Moto G5 plus keeps booting to TWRP. No matter what ROM I install. What do I do?

What did you do to get here? Were you on stock before? Did you we Data? You haven't really given any information...

Mikeandrd2292 said:
My Moto G5 plus keeps booting to TWRP. No matter what ROM I install. What do I do?
Click to expand...
Click to collapse
Booting into TWRP or into the bootloader?
If the Bootloader, that's a simple fix... If TWRP you probably flashed it to the boot partition instead of recovery partition, but flashing a ROM should fix it as it over-writes that partition anyway.
Guess if that doesn't help we need more info...

Mikeandrd2292 said:
My Moto G5 plus keeps booting to TWRP. No matter what ROM I install. What do I do?
Click to expand...
Click to collapse
1) never be in a hurry here... we help when we can...
2) search the forum: other people reported this problem an found a solution.

Sorry. I posted this right before I fell asleep. I updated my phone and it booted into TWRP. Now it just keeps booting into TWRP. Every ROM I flash, it does the same thing.

Updated from what to what?

Karlinski said:
Updated from what to what?
Click to expand...
Click to collapse
I restored my backup and there was a security update so I updated it and that's when all this happened.

So, you took a stock OTA Update on a rooted build, it sounds like. I believe you need to follow the steps to root again, and you should be good.

Karlinski said:
So, you took a stock OTA Update on a rooted build, it sounds like. I believe you need to follow the steps to root again, and you should be good.
Click to expand...
Click to collapse
The backup I restored was already rooted though :/
EDIT: I misread what you said. Yeah, I flashed a stock OTA update. But the problem is, I can't get into the system to root it again. It just keeps going to TWRP.

Mikeandrd2292 said:
The backup I restored was already rooted though :/
EDIT: I misread what you said. Yeah, I flashed a stock OTA update. But the problem is, I can't get into the system to root it again. It just keeps going to TWRP.
Click to expand...
Click to collapse
This procedure is for the G4, but the Factory ROM structure is the same for both the G4 and G5+:
https://forum.xda-developers.com/showpost.php?p=68948997&postcount=1
You can get the factory ROM here:
https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
Read through everything, and make sure it makes sense. I used this to remove TWRP from a G4.

Mikeandrd2292 said:
The backup I restored was already rooted though :/
EDIT: I misread what you said. Yeah, I flashed a stock OTA update. But the problem is, I can't get into the system to root it again. It just keeps going to TWRP.
Click to expand...
Click to collapse
In TWRP wipe caches and reboot... Should be fine.

acejavelin said:
In TWRP wipe caches and reboot... Should be fine.
Click to expand...
Click to collapse
That did nothing. I tried installing a new ROM and it restarted TWRP in the middle of installing.

Mikeandrd2292 said:
That did nothing. I tried installing a new ROM and it restarted TWRP in the middle of installing.
Click to expand...
Click to collapse
Wiping caches was only to get rid of the OTA file... the OTA zip file is stored in cache, removing it should have allowed the phone to boot normally, if not there is a bigger problem.
Start fresh... Flash latest TWRP, copy a new ROM and Gapps to device, wipe everything except internal/external storage, and flash clean... If it fails, or restarts in the middle of installing, you have more serious problems... likely a partition or hardware issue.

same thing happened to me, I just started over and flashed a stock image, install twrp, update to latest ota, then rooted with magisk. pretty easy with drtechie's moto g5 plus toolkit v1.1.0