Related
Do you think we will have a lineageos build for huawei nova?
That would be great, but first we need a rom base for any rom....
After my exams in february I would like to try porting Lineage OS to our huawei nova...but thats not a promise, it's an "Let's try and hope.."
Too bad there was not activity on this phone yet.
I really really hoped this gonna replace my Nexus 5 ( the >5 inch / 70cm width trend sucks - phones are just too big!) - but nooope..
I had it already in the hands, good that I didn't bought it. But I maybe would if someone would work on it :laugh:
Once huawei releases kernel source I will start working on it.
gsantner said:
Too bad there was not activity on this phone yet.
I really really hoped this gonna replace my Nexus 5 ( the >5 inch / 70cm width trend sucks - phones are just too big!) - but nooope..
I had it already in the hands, good that I didn't bought it. But I maybe would if someone would work on it [emoji23]
Click to expand...
Click to collapse
I'm a flash aholic... But for now i can wait, this phone impressed in so many ways till now, no need to hurry.
For this time there is the incredible screen on time and with su and xposed i have all i need for now. I will just sit and wait [emoji12]
Grarak said:
Once huawei releases kernel source I will start working on it.
Click to expand...
Click to collapse
Did they release those for previous phones too?
I figured since this is a snapdragon device the chance for roms will be much higher. Since they don't really release anything for their own chipsets iirc.
K-putt said:
Did they release those for previous phones too?
I figured since this is a snapdragon device the chance for roms will be much higher. Since they don't really release anything for their own chipsets iirc.
Click to expand...
Click to collapse
I think they released the kernel for many phones in the past..but you can also extract it from the stock firmware..so that shouldn't be a problem to build lineage for this device, but it takes time.. ?
Xelfmade said:
I think they released the kernel for many phones in the past..but you can also extract it from the stock firmware..so that shouldn't be a problem to build lineage for this device, but it takes time.. ?
Click to expand...
Click to collapse
No you can't
You guys can try to email [email protected] and bug them to release the kernel sources
Hello everyone, i really want by this phone too, but the poor number of post in this forum afraid me ?
I found that : http://consumer.huawei.com/en/opensource/detail/index.htm?siteCode=worldwide&productCode=Smartphones&fileType=openSourceSoftware&pageSize=10&curPage=1
Is it source which are requierd for build ROM ?
Grarak said:
No you can't
You guys can try to email [email protected] and bug them to release the kernel sources
Click to expand...
Click to collapse
Ofcourse you can, I needed the stock kernel for building TWRP..
Hey my device is very much heating on flashing the lineage os
Sent from my 2014818 using XDA Free mobile app
Xelfmade said:
Ofcourse you can, I needed the stock kernel for building TWRP..
Click to expand...
Click to collapse
Then good luck building a rom with prebuilt kernel
shm2210 said:
Hey my device is very much heating on flashing the lineage os
Sent from my 2014818 using XDA Free mobile app
Click to expand...
Click to collapse
Wich phone do you use?
https://forum.xda-developers.com/nova-plus/development/source-release-huawei-nova-nova-plus-t3548956
The sources
@Grarak you're right I mixed two diffrent things there..
Can you PM me? I would like to work with you together..
any update guys? i'm hating EMUI
Hello all,
Can any dev actually make official TWRP for Redmi 3s. I know cofface and the other guy made TWRPs but they aren't official.
So if anyone who knows Chinese can either contact those devs and ask for them to develop twrp officially.
Or if any one can actually develop an official version for our device.
Kind regards all
Official means if TWRP devs work on it
I don't think they've that much time to work on such devices
Instead they make it for premium phone.
And it's not hard to port TWRP if you've the original one
Please read the official twrp site, they only need sources, once the twrp is built for a device.
Redmi 3, redmi 1s, redmi note 2 all have official twrp
Oh come on people, this is the first step to official custom ROMs
can anyone tell me what is stopping them to make official TWRP for so long? every single device has it even redmi 1s redmi 3 and redmi note
Well I'm guessing that the devs are contemt with the cofface and flou twrps, but it would still be nice if we got the attention of somebody, who knows how to build a recovery and make it official.
I would do it, but I would need to learn from scratch and it would probably take to long
Devs pls help
I never really understood why people are unsatisfied with unofficial builds, as long as they work without any issues
What's bugging you?
Kizoky said:
I never really understood why people are unsatisfied with unofficial builds, as long as they work without any issues
What's bugging you?
Click to expand...
Click to collapse
there is the reason they are unofficial,it all depends on one person ro maintain regular updates,no regular fixes less room to work with and btw not a single build so far is bugless or stable on our device so maybe that is why. No one fixed dark video in camera recording so far for almost 3 months with kernel source out.
So no one with a bit of knowledge is willing to to do this. I'll try to make a build, but cannot guarantee I'll successed
bekcicandrej said:
So no one with a bit of knowledge is willing to to do this. I'll try to make a build, but cannot guarantee I'll successed
Click to expand...
Click to collapse
That would be still unofficial.
Kizoky said:
That would be still unofficial.
Click to expand...
Click to collapse
https://twrp.me/faq/OfficialMaintainer.html
What is the difference between official and unofficial as they are working the same.
harnamgour said:
What is the difference between official and unofficial as they are working the same.
Click to expand...
Click to collapse
Official is when TWRP acknowledged it as trusty
i.e.: an Official build is updated every week, month, and is always upgraded to the next level of android, or not. (Redmi 3 still has 5.1 TWRP official, but no 6.0)
Unofficial is when it wasn't acknowledged, so a developer/user built it from scratch, and it gets only updated once, or twice, It depends on the user/developer itself.
Once I get my 3S finally (possibly after 2 weeks), I'll try to make a bugless TWRP
The TWRP we are using is basically a port (I couldn't find anywhere else the sources for Redmi 3S TWRP)
Given by how Kenzo is similar to Land, I have made a semi-working TWRP tree
https://github.com/Kizoky/android_device_xiaomi_land
It needs a pre-built kernel, which is obviously based on Stock or CM (Stock would be the best)
https://github.com/Kizoky/android_device_xiaomi_land/blob/android-6.0/BoardConfig.mk
It is lined out here.
Also, If some of you found some bugs within this tree just let me know
I won't make it as a seperate thread unless It is fully functional
Yey, thank you @Kizoky
bekcicandrej said:
Yey, thank you @Kizoky
Click to expand...
Click to collapse
No problem, but since I don't have the phone yet, I can't test it, that's why I need guinea pigs
Kizoky said:
No problem, but since I don't have the phone yet, I can't test it, that's why I need guinea pigs
Click to expand...
Click to collapse
I'm volunteering
bekcicandrej said:
I'm volunteering
Click to expand...
Click to collapse
Are you able to build?
Kizoky said:
Are you able to build?
Click to expand...
Click to collapse
Well I have a intel 4770k ocd to 4.4 and 16gb ram.
But no knowledge of actually building something :/
bekcicandrej said:
Well I have a intel 4770k ocd to 4.4 and 16gb ram.
But no knowledge of actually building something :/
Click to expand...
Click to collapse
Well, we need someone who is capable of building kernels/recoveries
Even though I have a strong PC, I don't have a large unneeded space for building Android (613GB is not enough when it is 90% full)
There's an unofficial build of Lineage OS 13 for KKBL available in the Razr HD section. As far as I know, this is the first build of Android 6.x or above that has been released on KKBL (which means 3.4.x kernel). So, two questions.
How many and what changes are required to get this working on XT907?
Has anyone already attempted this (and would like to provide feedback)?
@DiamondJohn, do you have any input on this? Would be interesting to try this out. Any idea what changes are required? Must be minor (screen density only?) I'm hoping at least...
rahimali said:
@DiamondJohn, do you have any input on this? Would be interesting to try this out. Any idea what changes are required? Must be minor (screen density only?) I'm hoping at least...
Click to expand...
Click to collapse
I'm, no crack dev, but the first thing I would look into are the differences in the device proprietary files, if they appear to be pretty similar devices.
XT925 = https://github.com/LineageOS/android_device_motorola_xt925/blob/cm-14.1/device-proprietary-files.txt
XT907 = https://github.com/LineageOS/android_device_motorola_xt907/blob/cm-14.1/device-proprietary-files.txt
For example, a big part of the "porting" of an xt897 ROM to an xt907 is held in the above info (and the relative locations of the actual binary files used with the same name). Its a starting point. I think someone converted a XT907 ROM to their xt925 using my above suggestion; but not perfectly.
When I first started building for my XT905 (ie a 907) I noted that there was already a device tree for the 907, but from memory, I think its for KKBL (im JBBL)
https://github.com/LineageOS/android_device_motorola_xt907
DiamondJohn said:
I'm, no crack dev, but the first thing I would look into are the differences in the device proprietary files, if they appear to be pretty similar devices.
XT925 = https://github.com/LineageOS/android_device_motorola_xt925/blob/cm-14.1/device-proprietary-files.txt
XT907 = https://github.com/LineageOS/android_device_motorola_xt907/blob/cm-14.1/device-proprietary-files.txt
For example, a big part of the "porting" of an xt897 ROM to an xt907 is held in the above info (and the relative locations of the actual binary files used with the same name). Its a starting point. I think someone converted a XT907 ROM to their xt925 using my above suggestion; but not perfectly.
When I first started building for my XT905 (ie a 907) I noted that there was already a device tree for the 907, but from memory, I think its for KKBL (im JBBL)
https://github.com/LineageOS/android_device_motorola_xt907
Click to expand...
Click to collapse
what about this one?
https://github.com/LineageOS/android_device_motorola_moto_msm8960
although i wouldn't know what to do with it since i'm no dev. you think you could somehow port the xt92x build to xt90x / msm_moto8960 devices?
rahimali said:
what about this one?
https://github.com/LineageOS/android_device_motorola_moto_msm8960
Click to expand...
Click to collapse
I have assumed that the source and the dest are both msm8960 devices, bo9th on the same level/ver of bootloader, and therefore this reads as a shared code path traversed by both devices, so its already taken care of (in both). You are looking for DIFFERENCES in the code path.
PS: the other thing you will need to modify is the "updater-script" (in particular the first line) and the build.props (it doesn't normally flash from the zip without extra instructions, even though "its there"). I have personally changed the first line of the updater script and then copied the firmware files and an updated build.prop within TWRP before my first boot for quick checks. Just use the set permissions to 755 for safety on each file as well (for testing)
I have been trying to build crDroid for xt907_JBBL, but have been having issues. Today I thought of upgrading to the KKBL, which made me then search and not find, a suitable TWRP (ie >= v3.x)
is there a xt907_KKBL TWRP >=3.x? or would I have to build one?
DiamondJohn said:
is there a xt907_KKBL TWRP >=3.x?
Click to expand...
Click to collapse
No. The last is 2.8.6
Shmaks said:
No. The last is 2.8.6
Click to expand...
Click to collapse
Can that flash Nougat ROM's?
DiamondJohn said:
Can that flash Nougat ROM's?
Click to expand...
Click to collapse
Who knows. The last custom rom for kkbl is cm12 and 2.8.6 flash it, so there is no way to check
Could you try the following sand let me know if it works?
https://forum.xda-developers.com/dr...p-twrp-xt907-kkbl-experimental-build-t3652716
DiamondJohn said:
Could you try the following sand let me know if it works?
https://forum.xda-developers.com/dr...p-twrp-xt907-kkbl-experimental-build-t3652716
Click to expand...
Click to collapse
Maybe i will try later today. But, what reason? Do you planning build nougat (or cm13) rom kkbl for XT907?
Shmaks said:
Maybe i will try later today. But, what reason? Do you planning build nougat (or cm13) rom kkbl for XT907?
Click to expand...
Click to collapse
I am trying to build crDroid v3.6 (ie 7.1.2), however for my JBBL its having numerous FC's I do have a zip file which would enable me to upgrade to KKBL which would make it interesting to see if a KKBL version is more stable. IF I could also SAFELY go back to JBBL I had a Moto X and accidently (by accepting an OTA) downgraded my bootloader and that caused a hard brick on the device, so I am a little cautious to say the least, as it is my daily.
I am also just downloading the device tree for an xt907 KKBL on my build machine and see if it can build a LineageOS 13. I'll let you know how it goes, and probably paste up a link for others to test if it succeeds to build since my device is JBBL
=============== edit =============
Correction, I am testing a Lineage OS 14.1 (ie Nougat) build of xt907 KKBL
DiamondJohn said:
IF I could also SAFELY go back to JBBL
Click to expand...
Click to collapse
For safely moving between kkbl-jbbl and backward i used flashbacks for along time:
https://androidfilehost.com/?fid=24533100289589621
https://www.androidfilehost.com/?fid=385035244224404260 (flash it in twrp, then firmware or custom rom on jbbl (kkbl) based)
Never had problems with them.
DiamondJohn said:
Correction, I am testing a Lineage OS 14.1 (ie Nougat) build of xt907 KKBL
Click to expand...
Click to collapse
Cool, hope for a successful experience
Shmaks said:
For safely moving between kkbl-jbbl and backward i used flashbacks for along time:
https://androidfilehost.com/?fid=24533100289589621
https://www.androidfilehost.com/?fid=385035244224404260 (flash it in twrp, then firmware or custom rom on jbbl (kkbl) based)
Never had problems with them.
Click to expand...
Click to collapse
Thanks, the links I found for these zips were all dead or required registration.
Shmaks said:
Cool, hope for a successful experience
Click to expand...
Click to collapse
Its at 4 % .., step 1512 of 34456 ... 5% and I'm off to bed, its late here. The big problem is uploading it to a host, its normally an over night job or at least a a few hours. So it may be two nights before its up somewhere to download IF it succeeds in da build.
9%....
11%...
DiamondJohn said:
Thanks, the links I found for these zips were all dead or required registration.
Click to expand...
Click to collapse
other (working) link https://www.dropbox.com/sh/791ixp14rqlzigo/AAAlNvQS3DGwzXv1AIeY0Fm2a
@DiamondJohn, I have the flashbacks to JBBL and KKBL available as well, lemme know if you want but the AFH links posted earlier work just fine as well.
Sorry I'm also on JBBL otherwise I would help you test your recovery. TWRP 2.8.x not compatible with Nougat?
Edit :: Do you think the XT907 has the horsepower to handle Nougat? I'd say the best best for this phone would be any flavor of MM but no higher. I'm on MoKeE Nougat JBBL and it seems to work well enough...
DiamondJohn said:
11%...
Click to expand...
Click to collapse
100%
It built successfully!:highfive: to be clear, I now have a LOS 14.1 (ie Nougat) ROM zip for an xt907 KKBL file, sitting on my disk. I will upload it (hours....) and post it up for someone (on KKBL) ...anyone... to try.
Shmaks said:
other (working) link https://www.dropbox.com/sh/791ixp14rqlzigo/AAAlNvQS3DGwzXv1AIeY0Fm2a
Click to expand...
Click to collapse
rahimali said:
@DiamondJohn, I have the flashbacks to JBBL and KKBL available as well, lemme know if you want but the AFH links posted earlier work just fine as well.
Click to expand...
Click to collapse
No need, because I have a an xt905, it has Australian frequencies, which means Australian specific modem. These zips were only for me to confirm the steps I plan to take when flashing manually using fastboot, from an Australian specific (ie xt905) Image file. so, one example is enough. Thanks anyway.
rahimali said:
Sorry I'm also on JBBL otherwise I would help you test your recovery. TWRP 2.8.x not compatible with Nougat?
Click to expand...
Click to collapse
I don't know. I know on previous version of Android, new versions of ROM zip files took advantages of features not in older TWRP images, and TWRP 2.8.x is getting old.
There is little drive in me building, uploading and posting a KKBL ROM post, if no-one else is testing it for me ie save me the hassle of flashing KKBL only to find TWRP &/OR ROM does not work. Yes, its all about me
rahimali said:
Edit :: Do you think the XT907 has the horsepower to handle Nougat? I'd say the best best for this phone would be any flavor of MM but no higher. I'm on MoKeE Nougat JBBL and it seems to work well enough...
Click to expand...
Click to collapse
More than enough. I have built a nougat ResurectionRemix and a crDroid (available HERE for testing; JBBL only) and it felt just as snappy as Marshmallow. Also, on my daily, I am running LOS13.0 with the Nougat Kernel, overclocked to 1.98GHz. ie we can also get a small/tiny boost easily with OC; the feature is built into the kernel but simply switched off in the LOS official builds.
DiamondJohn said:
100%
It built successfully!:highfive: to be clear, I now have a LOS 14.1 (ie Nougat) ROM zip for an xt907 KKBL file, sitting on my disk. I will upload it (hours....) and post it up for someone (on KKBL) ...anyone... to try.
Click to expand...
Click to collapse
Can't wait
Shmaks said:
Can't wait
Click to expand...
Click to collapse
have you tried TWRP for KKBL? And you may be waiting for a dud however upload is at 53%
DiamondJohn said:
have you tried TWRP for KKBL?
Click to expand...
Click to collapse
Yes, it works!
hi friends,
do you know, our nexus 4s get android Oreo by nitrogen or lineage or other roms? if yes, I know stable android Oreo version will release mid august, when we get custom rom?
we can't know this
When it comes fyi: asking for an ETA is kinda rude on xda
wait till October or November probably for a decently stable ROM
Excitedly expect first android Oreo Rom for nexus 4 on september 17
and first 32bit snapdragon android oreo port, fully work
https://forum.xda-developers.com/showpost.php?p=73494285&postcount=1356
so, now we have very big chance for our nexus 4...
and first nexus 5 android oreo port, booting and wifi working now, one similiar devices too
https://forum.xda-developers.com/showpost.php?p=73538437&postcount=6286
for now has boot problem but after all the first nexus 4 oreo
https://forum.xda-developers.com/showpost.php?p=73594437&postcount=231
I have compiled android 8 and I managed to get it booting(lots of changes on kernel and device tree). Need a lot of work but mako probably will get a fully fuctional android 8 rom.
good news
thanks for good news,
and maybe co-operation accelerates this work
equlog said:
I have compiled android 8 and I managed to get it booting(lots of changes on kernel and device tree). Need a lot of work but mako probably will get a fully fuctional android 8 rom.
Click to expand...
Click to collapse
If anyone wants to try Oreo in our lovely mako.
Original thread: Android 8.0 Mako
Download: here
equlog said:
If anyone wants to try Oreo in our lovely mako.
Original thread: Android 8.0 Mako
Download: here
Click to expand...
Click to collapse
Nice! At work and don't have my N4 to try it, but interested to hear how it is running, so I can try out when I get home. Is it mostly functional?
Can you share the device and kernel tree?
equlog said:
I have compiled android 8 and I managed to get it booting(lots of changes on kernel and device tree). Need a lot of work but mako probably will get a fully fuctional android 8 rom.
Click to expand...
Click to collapse
Just for my own curiosity, how do you know what changes need to be made to the device and kernel tree? Do you use officially supported device/kernel trees as a reference, or is there a guideline posted somewhere?
ariesgodofwar said:
Nice! At work and don't have my N4 to try it, but interested to hear how it is running, so I can try out when I get home. Is it mostly functional?
Click to expand...
Click to collapse
Really I haven't tested too much, busy at work... also my n4 have the touch screen broken and doesn't works very good lol.. but almost nothing works.
Its just to try out.
Renandelfanti said:
Can you share the device and kernel tree?
Click to expand...
Click to collapse
Sure, i'll upload to github later.
TheSt33v said:
Just for my own curiosity, how do you know what changes need to be made to the device and kernel tree? Do you use officially supported device/kernel trees as a reference, or is there a guideline posted somewhere?
Click to expand...
Click to collapse
The kernel is the used one in 7.1.2 and I added the Binder changes... the device tree is fixed by trying to booting and fixing the errors showed in last_kmsg .
equlog said:
Really I haven't tested too much, busy at work... also my n4 have the touch screen broken and doesn't works very good lol.. but almost nothing works.
Its just to try out.
Sure, i'll upload to github later.
The kernel is the used one in 7.1.2 and I added the Binder changes... the device tree is fixed by trying to booting and fixing the errors showed in last_kmsg .
Click to expand...
Click to collapse
Yes, I also flashed this and it boots. As you said, nothing works... But it is not less that it boots :laugh:
I've been trying since the source of O is released and could not boot it. Your work gives all mako users hope to see a working O build :good: Thanks for the work!
Nitin
I as well got a semi-working O build, but was a bit short on time to work on it. Could we collaborate somewhere? Perhaps a hangouts group?
I've flashed from mako 7.12, kind of like upgrade from 7.12
Sources up.
I used the vendor blobs from TheMuppets.
https://github.com/MakOreo
---------- Post added at 01:42 AM ---------- Previous post was at 01:24 AM ----------
Ziyan said:
I as well got a semi-working O build, but was a bit short on time to work on it. Could we collaborate somewhere? Perhaps a hangouts group?
Click to expand...
Click to collapse
:good:
I dont have too much free time, but I always follow the status of my devices. I Hope to see a fully working O rom asap.
Ziyan said:
I as well got a semi-working O build, but was a bit short on time to work on it. Could we collaborate somewhere? Perhaps a hangouts group?
Click to expand...
Click to collapse
That's a good idea... What do you say @equlog?
Thanks a lot for sharing the sources :good:
Nitin
as good as we hoped
Hi,
I'm building CM-12.1 for SM-G531F (till I don't have it a bit stable I won't be able to make any more recent version anyway). Till now I built a TWRP 2.8.7.0, its a bit buggy and reboot after some time.
I built CM-12.1, it boots and runs, but Camera, WiFi, Bluetooth, Ril, sound are not working for now.
I'm wondering if anyone was still working on it and if you want to team up.
Sheers.
In case someone wants to dev for this phone, here's my repos (cm-12.1 boots):
https://github.com/Nemirtingas/android_hardware_marvell_pxa1908
https://github.com/Nemirtingas/android_hardware_mrvl_power
https://github.com/Nemirtingas/android_device_samsung_pxa1908-common
https://github.com/Nemirtingas/android_device_samsung_mrvl-common
https://github.com/Nemirtingas/android_device_samsung_grandprimevelte
https://github.com/Nemirtingas/android_vendor_samsung_grandprimevelte
A little update, Bluetooth & Wifi are fixed.
Nemirtingas said:
A little update, Bluetooth & Wifi are fixed.
Click to expand...
Click to collapse
Sound is working and now Baseband & IMEI is detected, but SIM card is not recognized. I'm working on RIL now. Hope to get a stable CM-12.1 Rom soon.
Camera still doesn't work though.
Nemirtingas said:
Sound is working and now Baseband & IMEI is detected, but SIM card is not recognized. I'm working on RIL now. Hope to get a stable CM-12.1 Rom soon.
Camera still doesn't work though.
Click to expand...
Click to collapse
Ril working :good:
And now, Camera works !
Keep on the good work!
Now working on android 6.0.
I tried 7.1 but its too buggy.
Nemirtingas said:
Now working on android 6.0.
I tried 7.1 but its too buggy.
Click to expand...
Click to collapse
can you upload a test build for bug testing bcoz i have a working twrp from 4pda 3.0.2
Munu Prakash Pattanaik said:
can you upload a test build for bug testing bcoz i have a working twrp from 4pda 3.0.2
Click to expand...
Click to collapse
working twrp
Munu Prakash Pattanaik said:
can you upload a test build for bug testing bcoz i have a working twrp from 4pda 3.0.2
Click to expand...
Click to collapse
Which one do you want actually ? 12.1, 13.0 or 14.1 ?
Nemirtingas said:
Which one do you want actually ? 12.1, 13.0 or 14.1 ?
Click to expand...
Click to collapse
13 and 14.1
---------- Post added at 06:17 AM ---------- Previous post was at 06:13 AM ----------
Munu Prakash Pattanaik said:
13 and 14.1
Click to expand...
Click to collapse
i can help you with bug fixing for both the versions ,,,, because my desktop does not have configurations to build a rom and I cannot provide a enough time.
Working on CM-13.0 now, Everything looks OK except video recording, picture works.
Is anyone willing to try it ?
Nemirtingas said:
Working on CM-13.0 now, Everything looks OK except video recording, picture works.
Is anyone willing to try it ?
Click to expand...
Click to collapse
I am, are you sure we're talking about The G531F, one with the 64 bit chipset Marvell 1908? I am willing to try it 13 or 14 whichever you have. Just want a stable environment where i could install few small apps and make a call without major slowdowns. I want to get rid of this stock rom. Twrp is installed.
Alpha8080 said:
I am, are you sure we're talking about The G531F, one with the 64 bit chipset Marvell 1908? I am willing to try it 13 or 14 whichever you have. Just want a stable environment where i could install few small apps and make a call without major slowdowns. I want to get rid of this stock rom. Twrp is installed.
Click to expand...
Click to collapse
Yes, that's the one. I'm working from scratch as there are no sources for Marvell. Its a 64bit Kernel with a 32bit ROM. You can check my github sources that I posted on my first quote.
Nemirtingas said:
Yes, that's the one. I'm working from scratch as there are no sources for Marvell. Its a 64bit Kernel with a 32bit ROM. You can check my github sources that I posted on my first quote.
Click to expand...
Click to collapse
Well i am no android developer but i can help you test out roms. I don't have the resource to build it. I am gonna need installable zip.
Alpha8080 said:
Well i am no android developer but i can help you test out roms. I don't have the resource to build it. I am gonna need installable zip.
Click to expand...
Click to collapse
Send me a private message so I can send you a dl link.
I'll have to clean the build & do a full rebuild, test the rom and upload it. I'll message you when its ready.
Nemirtingas said:
Yes, that's the one. I'm working from scratch as there are no sources for Marvell. Its a 64bit Kernel with a 32bit ROM. You can check my github sources that I posted on my first quote.
Click to expand...
Click to collapse
Man, i interesting in test this ROM in G531M. Some Link to download?
Erioernesto02 said:
Man, i interesting in test this ROM in G531M. Some Link to download?
Click to expand...
Click to collapse
Hi, this ROM is for SM-G531F, but you can find it here: https://forum.xda-developers.com/grand-prime/development/lineageos-13-0-grand-prime-velte-t3874411
Nemirtingas said:
Hi, this ROM is for SM-G531F, but you can find it here: https://forum.xda-developers.com/grand-prime/development/lineageos-13-0-grand-prime-velte-t3874411
Click to expand...
Click to collapse
Thanks a lots bro.