Database Users

Android N Permanent VoLTE Fix. 10000% Working Solution.

Hello,
Just Wanted To Give A Straight Forward Solution For VoLTE Fix In Android N ROMs.
So, Here U Go.
1. Download This ROM (http://bigota.d.miui.com/6.11.3/miui_HMNote3ProGlobal_6.11.3_233ef61784_6.0.zip)
2. Download This TWRP (https://drive.google.com/open?id=0B6qi9i0uOR-BYnpaendYQ1BBRFE)
3. Download This Firmware (https://www.androidfilehost.com/?fid=385035244224398629)
4. Download This ROM (https://sourceforge.net/projects/re...onRemix-N-v5.8.0-20161126-kenzo.zip/download)
5. Download This ROM Too (https://sourceforge.net/projects/re...N-v5.8.0-20170114-kenzo-Nightly.zip/download)
1. Now, Unlock Your Bootloader, Officially Or Unofficially, I Don't Give A **** For That.
2. Flash TWRP (Step 2) Using Fastboot Or Using Existing TWRP.
3. Wipe Everything Except Ur Internal And External Storage And Flash MiUI 6.11.3 (Step 1) Using Just Flashed TWRP And After Flashing It Go To Install Again And See In Root Directory, There Will Be A Folder Named "Flash_Folder" Go Inside It And Flash Lazy Flasher. Don't Bother For Bootloader Locking, This TWRP Will Knock It Off.
4. Now Start The Device, And When On Setup Screen, See There Will Be VoLTE (That's Normal For MIUI) Be There For 5 Minutes (Complete Setup Or Not, I Don't Give A **** For That Too).
5. Now Switch Off Your Phone, Wipe System, Data, Cache, Dalvik And Flash The Firmware (Step 3).
6. Just After Flashing Firmware, Flash The ROM (Step 4), Its RR 26/11 Version Remember.
7. Start The Device, Voila You Got VoLTE.
8. Now Get Back To TWRP And Dirty Flash Latest RR (Until Now Latest RR Link Is Given On Step 5) Without Wiping Anything.
9. Flash Pico GApps 7.1 arm64 (Cmon U Know Link Of This).
10. Enjoy.
NOTE : You Can Now Wipe Everything And Flash Any Nougat ROM.
Every Resources Belong To Their Original Owner, All Credits Goes To Them.
Kill The Thanks Button If Helped, No Donation Required, I'm Bill Gates Of My Heart xD.

this is for kenzo right?

bro ur links are down

zeon321 said:
this is for kenzo right?
Click to expand...
Click to collapse
what is kenzo??

ak_bagade said:
bro ur links are down
Click to expand...
Click to collapse
Found that links have extra ) in the end.
Remove that.

cyjil said:
what is kenzo??
Click to expand...
Click to collapse
It's the 32gb Snapdragon version of Kenzo

Has this even worked for anyone now on earth? ?

Is it required to mount /cust and /system before falshing the firmware and the ROM?
---------- Post added at 05:56 PM ---------- Previous post was at 05:50 PM ----------
This method is working for sure. Thanks a ton man!

zeon321 said:
It's the 32gb Snapdragon version of Kenzo
Click to expand...
Click to collapse
16 GB snapdragon version too. Okkk

Hi OP & alls. Can i use this for Kate?

SOLUTION TO Downgrade Netcom AL10 3GB Ram Or Any Honor 5X From VOLTE To non VOLTE

Finally after many weeks I have a simple solution to downgrade the AL 10 3gb version VOLTE to non VOLTE, I was then able to flash lineage and now have it working with borh sim cards with no issues...YIPPEE ! ! ! .
After reading online and checking much information the fact remains that the modem is embedded on the snapdragon 616 I then set about findin a solution, as you are probably aware there is no software anywhere for the AL 10 and even downgrading the 2gb version can be a huge pain in the preverbial but now we have a solution that works and is painless !
THIS GUIDE ASSUMES YOUR AL 10/ HONOR 5X HAS TWRP, IF NOT INSTALL IT THEN COME BACK...
Step 1... perform 2 full recovery's one for restore one to mod
Step 2.. shut down phone remove sd card from phone and put into computer then browse to recovery folder..
Step 3 download the zip for the L24 from here https://www.androidfilehost.com/?fid=24459283995315166
4. Extract the zip to its own folder..
step 5 open the folder with the l24 files in one side of your monitor and open the twrp backup you made in the other so you can see both sets of files clearlly..
step 6.. copy each file one by one from the l24 folder to the twrp folder and when asked say yes to overwrite each file, this will take some time, when you have done all files unmount sd card and put it back into phone and reboot into recovery..(DO NOT TRY TO JUST USE THE L24 DOWNLOAD IN TWRP AS IT WONT WORK EACH PHONE HAS ITS OWN I.D AND TWRP CHECKS THIS)
step 6. download latest lineage ROM and pico gapps for arm 64, and copy to sd card by plugging usb into phone while in recovery
step 7 select restore and select the latest backup (the one with the l24 files you copied into it ) and untick everything apart from modem..
TAKE NOTE.. DO NOT TICK ANYTHING EXCEPT MODEM UNDER ANY CIRCUMSTANCES.. CHECK AND CHECK AGAIN TO BE SURE..
REMEMBER MY FAVOURITE MOTTO, THINK BEFORE YOU CLICK ! ONLY THE MODEM RESTORE MUST BE TICKED
Let twrp flash the modem.
step 8 go back and select wipe phone after that wipe data, system cache and internal memory.. NOTHING ELSE..
Step 9 select install and flash lineage..then flash Pico gapps.
now reboot and enjoy !
TAKE NOTE.. your phone might show no signals and say no sim is detected on the first boot, do not panic just reboot and they will appear, this only happens once.
DONT FORGET TO DO A BACKUP STRAIGHT AWAY ! ! 1

swukjay said:
step 7 select restore and select the latest backup (the one with the l24 files you copied into it ) and untick everything apart from modem..
TAKE NOTE.. DO NOT TICK ANYTHING EXCEPT MODEM UNDER ANY CIRCUMSTANCES.. CHECK AND CHECK AGAIN TO BE SURE..
REMEMBER MY FAVOURITE MOTTO, THINK BEFORE YOU CLICK ! ONLY THE MODEM RESTORE MUST BE TICKED
Let twrp flash the modem.
Click to expand...
Click to collapse
At this stage, I get four boxes to tick, 'Boot, 'Data', 'Recovery' and 'System'. No 'Modem' tickbox. Anyone have any suggestions about what should be ticked/not ticked? What will happen if I get it wrong?
---------- Post added at 11:40 PM ---------- Previous post was at 11:09 PM ----------
Ed_shred said:
At this stage, I get four boxes to tick, 'Boot, 'Data', 'Recovery' and 'System'. No 'Modem' tickbox. Anyone have any suggestions about what should be ticked/not ticked? What will happen if I get it wrong?
Click to expand...
Click to collapse
I figured out that what you can restore from the backup depends on what your backup contains; so, I tried a new TWRP backup with everything ticked. However, my version of TWRP (3.2.2-0) doesn't give me an option to back up a 'modem' partition. What are the options? Did something replace 'modem', which can be substituted? Or can I downgrade to an older version of TWRP?

[HONOR FRD-L02(INDIAN model)] Back to STOCK ROM from any CUSTOM ROM(JIO,volte fix)

FIRSTLY BACKUP BACKUP BACKUP any important data.
Please feel free to share this thread!!
I HARD-BRICKED my honor 8 twice by installing firmware of other regions(us,uk) but being just a noobie I was able to recover my phone. So don't worry take a chill pill:angel::angel:!!
Requirements:
1. Since you are in a custom rom so developer mode will be ON(if not just click build number 9-10 times) , click USB debugging ON.
2. ROOT not necessary but you can do by many apps or by the method of OEM unlocking(command line - Windows Powershell/Command Prompt)
3. Now download these 2 zip files-
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1190/g79/v90977/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...el_in/update_data_full_FRD-L02_channel_in.zip
4. Copy these zip files to an SD card
5. Now flashing twrp on your phone-
a) download adb files->Press SHIFT and right click-> Windows POWERSHELL-> write adb devices-> see the o/p as number devices
->enter adb reboot bootloader->See the screen of honor 8-> enter fastboot flash recovery twrp.img(download twrp file and rename it as twrp)
->Now plug off from PC-> Format phone-> Install external sd-> flash the zip file-> GO to recovery.
b) e-recovery will come wipe the options(cache,system)
c)REBOOT
You can now enjoy NOUGAT 7.0 with JIO working properly, you are back to home!!!
Thank you.
Wanna appreciate/help through any mode PM me, it will mean a lot to me.

Which build no. is the above ROM? B350?

What do you mean by format phone ? Factory reset from twrp or delete data?

Oem unlocked message will disappear??

Why there is no huawei apps NFC nor working
Bluetooth not working

Karthiknaik said:
Why there is no huawei apps NFC nor working
Bluetooth not working
Click to expand...
Click to collapse
flash the data file again via dload and if not working then flash the saem via TWRP. it will work 100%
---------- Post added at 11:34 AM ---------- Previous post was at 11:33 AM ----------
pradeesa said:
Oem unlocked message will disappear??
Click to expand...
Click to collapse
Yes. Once you dload and back to stock with locked bootlaoder, that message will disappear.

boris dmello said:
What do you mean by format phone ? Factory reset from twrp or delete data?
Click to expand...
Click to collapse
should be factory reset in TWRP. or you can simply use dlaod to go back.

Cannot update the phone normally
It was flashed successfully , but when I update to the latest version ,during update installation it says failed and to go to e recovery . How can I normally update my phone?

fails
when try to install with TWRP it fails to mount system partition & obviously it fails. Don't know what wrong i'm doing!

Thank you so much! It helped be a lot

HELP! HUAWEI P10 LITE (WAS-LX1A) Dual Sim Bricked after unnistalling Magisk

Ok so basically I unlocked the bootloader from my phone / installed TWRP and then proceeded to install Magisk V16.
After some time I went and unninstalled magisk 16 (because I wanted to install v14).
Now idk if this was the problem, but I didnt reboot after unninstalling magisk, I just turned off my phone and went to TWRP to install V14.
After this my phone cant boot to system, it keeps showing the Huawei logo and the unlock info (Your phone has been unlocked and cant be trusted... etc)
I think I have to install the stock rom, but I'm not sure how.
Any help would be very much appreciated :/

Download this archive http://androidhost.ru/JT pit dload folder in your sd card and then flash via 3 buttons make factory reset after installation ends and u are done.

cropp7 said:
Download this archive -url- pit dload folder in your sd card and then flash via 3 buttons make factory reset after installation ends and u are done.
Click to expand...
Click to collapse
The dload folder is 7gb, do I put the whole dload folder in the root of the external sd and then flash?

cropp7 said:
Download this archive -url- pit dload folder in your sd card and then flash via 3 buttons make factory reset after installation ends and u are done.
Click to expand...
Click to collapse
ALSO is there a way to install that through adb sideload?

Quiken said:
ALSO is there a way to install that through adb sideload?
Click to expand...
Click to collapse
i dont know about sideload. I have not try it, but u need to put whole 7gb dload foulder in the sd card. I know it's works cuz i delete my whole system from twrp and i install it again. i mean i delete system data and others exept cust vendor and model

cropp7 said:
i dont know about sideload. I have not try it, but u need to put whole 7gb dload foulder in the sd card. I know it's works cuz i delete my whole system from twrp and i install it again. i mean i delete system data and others exept cust vendor and model
Click to expand...
Click to collapse
wait, so I have to delete system? And if so do I have to do it in Wipe > Advanced Wipe > System ??

cropp7 said:
i dont know about sideload. I have not try it, but u need to put whole 7gb dload foulder in the sd card. I know it's works cuz i delete my whole system from twrp and i install it again. i mean i delete system data and others exept cust vendor and model
Click to expand...
Click to collapse
btw, I downloaded the b182 rom. But I have no idea if its the correct one. My phone model only displayed WAS-LX1A. Do you think the one you sent works with no problem? Or do I have to know the exact model?

Quiken said:
btw, I downloaded the b182 rom. But I have no idea if its the correct one. My phone model only displayed WAS-LX1A. Do you think the one you sent works with no problem? Or do I have to know the exact model?
Click to expand...
Click to collapse
no there is no problem, i have manage to restor my oem info with ur model my original is lx1 and i make it lx1A and install that softwere without problems
---------- Post added at 12:21 PM ---------- Previous post was at 12:19 PM ----------
Quiken said:
wait, so I have to delete system? And if so do I have to do it in Wipe > Advanced Wipe > System ??
Click to expand...
Click to collapse
u dont need to wipe anything , just put the whole dload in ur sd card turn off ur phone , already is , and press all 3 buttons - vol + vol - and power button thogheter, and waith till ur screen show update is seccuses or similar and u are done.

cropp7 said:
no there is no problem, i have manage to restor my oem info with ur model my original is lx1 and i make it lx1A and install that softwere without problems
---------- Post added at 12:21 PM ---------- Previous post was at 12:19 PM ----------
u dont need to wipe anything , just put the whole dload in ur sd card turn off ur phone , already is , and press all 3 buttons - vol + vol - and power button thogheter, and waith till ur screen show update is seccuses or similar and u are done.
Click to expand...
Click to collapse
but what about the build number, I looked at build.prop on terminal and it shows NRD90M, idk what this is. Plus how could I get back to my original model?

Quiken said:
but what about the build number, I looked at build.prop on terminal and it shows NRD90M, idk what this is. Plus how could I get back to my original model?
Click to expand...
Click to collapse
this is not even a build number of the p10 lite series , it's maybe ur serial number specificated for ur device.
And listen follow this steps without asking me anything else.
1. put dload in sd (whole folder)
2.shut down phone (if is not)
3.press all vol + vol - and power button toghether
4.waith till installation ends
5. enjoy
6. no more wories and asking
7. do this and after that if u have problem we will descused it.

[GUIDE] How to install official Global Rom V9.6.8.0.OEDMIFD on Antirollback device

NOTES:
- This will fix the modem on the global rom, you will be able to call and use the internet.
- I know MIUI 10.0.1.0.OEDMIFH has been released. If you have no problem with MIUI 10 AND with Antirollback, just use the fastboot version and flash that.
- If you want MIUI 10.0.1.0.OEDMIFH firmwareless go to @yshalsager thread and flash that instead of my MIUI 9 fw-less rom (installation process is the same)
- This thread is useful for people who want Global Stable MIUI 9 on Mi Max 3 with a working modem.
- If you installed MIUI 9.6.6.0.OEDMIFD fw-less from here before, just download the MIUI 9.6.8.0.OEDMIFD / 10.0.1.0.OEDMIFH FW-LESS and flash that above your rom using TWRP.
- if you install this rom on a non-Antirollback device, make sure not to update to MIUI 10 from updater or you will get Antirollback.
- if you have antirollback and you want this rom, follow the guide below and dont update to MIUI 10 if you prefer MIUI 9.
- V9.6.8.0.OEDMIFD has Antirollback, So people who want to have less problems with their rom, you can flash the full rom with the firmware-update folder instead of the fw-less one as you already have
antirollback, and you will get the correct firmware for your phone
- Read more about Antirollback here: here
Installation guide:
NOTE: By flashing this you agree that Im not responsible for any bricking situation that might happen because of this process!
YOU MUST HAVE UNLOCKED BOOTLOADER
1. Go to twrp on your device and wipe everything! (system,vendor,internal .....)
2. Change your data partition to F2FS
3. Reboot to twrp and format userdata
4. Flash China Stable 9.6.12.0 via Fastboot (or 9.6.11.0 if you dont have Antirollback because 9.6.12.0 has antirollback)
5. Flash twrp and reboot to it
6. in TWRP wipe everything (system,vendor,internal .....)
7. Change your data partition to F2FS
8. Reboot to twrp and format userdata
9. Change the data partition back to EXT4
10. Reboot one last time to TWRP and copy the fw-less rom to your internal storage
11. flash the fw-less rom / (full rom 9.6.8.0 if you already have antirollback and you want MIUI 9)
12. wipe cache/ dalvik
13. mount cust partition in twrp, go to the file explorer and go to the cust folder from the root of the device
15. delete everything in that folder
17. delete the rom from your internal storage using MTP
16. boot to fastboot mode and flash the cust.img using "fastboot flash cust cust.img"
17. delete all the files on your internal storage using MTP
18. reboot, it will say reset phone, click on it, wait until the device boots and enjoy!
Downloads
fw-less 9.6.8.0.OEDMIFD Rom: here
Cust Partition Fix (Cust.img): here
Known Problems:
- The software keys sometimes fail
- The play store isnt certified (safetynet doesnt pass) (can be fixed using magisk root)

Lets reserve one comment

thank your time and work, want test when i have some time, thanks X 1000

Thank you for the guide!
Sent from my MI MAX 3 using Tapatalk

If you are not on an antirollback device (Currently on china 9.6.11.0) How would I go about flashing?

omniphil said:
If you are not on an antirollback device (Currently on china 9.6.11.0) How would I go about flashing?
Click to expand...
Click to collapse
same as the antirollback device.
Flashing the normal rom will cause problems and might not work without the cust fix.
If you dont flash the fw-less rom, the rom will update the firmware (firmware-update folder) to its own version which will brick your modem again.

omer919 said:
same as the antirollback device.
Flashing the normal rom will cause problems and might not work without the cust fix.
If you dont flash the fw-less rom, the rom will update the firmware (firmware-update folder) to its own version which will brick your modem again.
Click to expand...
Click to collapse
Ok, so I followed this exactly with the exception of the step 17, There were no files on on internal storage showing up in MTP at all?
Also on step 4 I flashed the China rom successfully but when finished I did not restart the phone and let it boot up and go thru the initial setup of the rom, I just flashed the China rom and proceeded to the next step.
But it certainly gives me the 9.6.6.0 global rom, however the radio is now broken again, I cant get out to the internet. This really makes no sense? On the China rom the radio certainly works fine.
Any ideas? What a frustrating phone this has been, I'm sort of mad at the vendors putting these fake roms on here with non working modems....
There's go to be a way to flash just the modem firmware from the China rom?

omniphil said:
Ok, so I followed this exactly with the exception of the step 17, There were no files on on internal storage showing up in MTP at all?
Also on step 4 I flashed the China rom successfully but when finished I did not restart the phone and let it boot up and go thru the initial setup of the rom, I just flashed the China rom and proceeded to the next step.
But it certainly gives me the 9.6.6.0 global rom, however the radio is now broken again, I cant get out to the internet. This really makes no sense? On the China rom the radio certainly works fine.
Any ideas? What a frustrating phone this has been, I'm sort of mad at the vendors putting these fake roms on here with non working modems....
There's go to be a way to flash just the modem firmware from the China rom?
Click to expand...
Click to collapse
I have none of the stated issues.
Follow the guide again from step 1 and this time setup the phone on 9.6.11.0 (dont let it update to 9.6.12.0)
Make sure that on fastboot you choose clean all and not save my data

omer919 said:
I have none of the stated issues.
Follow the guide again from step 1 and this time setup the phone on 9.6.11.0 (dont let it update to 9.6.12.0)
Make sure that on fastboot you choose clean all and not save my data
Click to expand...
Click to collapse
Ok so once 9.6.11.0 flashes, let the phone boot up and go through all the initial setup, then reboot in TWRP and continue. I will do that...
Yes, on fast boot I am choosing "Clean All"
How about step 17? I don't seem to see what i'm supposed to be doing there?

omniphil said:
Ok so once 9.6.11.0 flashes, let the phone boot up and go through all the initial setup, then reboot in TWRP and continue. I will do that...
Yes, on fast boot I am choosing "Clean All"
How about step 17? I don't seem to see what i'm supposed to be doing there?
Click to expand...
Click to collapse
after you flash the rom, you need to mount the cust partition.
after that you need to use the file manager in twrp to delete everything in the cust partition and then copy all the files from the cust fix zip to the cust folder on your phone using the twrp file explorer. on 17 I meant that you delete the files on your Internal storage that you used to copy to the cust folder so you wont have any files left before running the system for the first time

omer919 said:
after you flash the rom, you need to mount the cust partition.
after that you need to use the file manager in twrp to delete everything in the cust partition and then copy all the files from the cust fix zip to the cust folder on your phone using the twrp file explorer. on 17 I meant that you delete the files on your Internal storage that you used to copy to the cust folder so you wont have any files left before running the system for the first time
Click to expand...
Click to collapse
I certainly mounted the Cust partition and copy everything copied over, I actually copied the Cust Fix files from an sd card to internal so there was nothing to clean up in my case.
Ok, I am crossing my fingers here
---------- Post added at 11:11 AM ---------- Previous post was at 10:41 AM ----------
So while I was restoring my data from google I was certainly getting text messages. A phone call worked too. However after all my data finished restoring from my google account and I rebooted I now have no cell signal again.
I couldn't imagine something that gets restored would mess up the cellular connection, but I am going to have to wipe and start over and not restore anything from my account to see if that helps at all...
Ugh....

omniphil said:
I certainly mounted the Cust partition and copy everything copied over, I actually copied the Cust Fix files from an sd card to internal so there was nothing to clean up in my case.
Ok, I am crossing my fingers here
---------- Post added at 11:11 AM ---------- Previous post was at 10:41 AM ----------
So while I was restoring my data from google I was certainly getting text messages. A phone call worked too. However after all my data finished restoring from my google account and I rebooted I now have no cell signal again.
I couldn't imagine something that gets restored would mess up the cellular connection, but I am going to have to wipe and start over and not restore anything from my account to see if that helps at all...
Ugh....
Click to expand...
Click to collapse
basic rule number 1, always start clean without any restores if you want 0 bugs/problems

omer919 said:
basic rule number 1, always start clean without any restores if you want 0 bugs/problems
Click to expand...
Click to collapse
Copy that, I will report back with the clean start...
---------- Post added at 12:09 PM ---------- Previous post was at 11:56 AM ----------
Negative... Still no service....
Maybe I just have a flaky phone? Tho i do have service fine with the China rom.
I guess i'll just have to wait until there is a flashable global rom complete with modem and stuff.

Thank for the big effort. I made it following this guide.
But I think this is MIUI 9 but I like MIUI 10 much more.
So I revert back to EU 8.9.6 and I satisfy with this.

fordarm said:
Thank for the big effort. I made it following this guide.
But I think this is MIUI 9 but I like MIUI 10 much more.
So I revert back to EU 8.9.6 and I satisfy with this.
Click to expand...
Click to collapse
I'M using eu 8.9.6 and stock sms app problem do you have it too.?
but in 8.8.9 it was OK

azhar63 said:
I'M using eu 8.9.6 and stock sms app problem do you have it too.?
but in 8.8.9 it was OK
Click to expand...
Click to collapse
I am using special version which already fix SMS issue and also remove ARB related stuffs.
You can download that from https://drive.google.com/file/d/1AejzODOxusDfeD125KbClDnJGHbHPh-U/view

Official global rom version is 9.6.7.0
I got an information from Korean xiaomi community that the official global rom version is 9.6.7.0 but not 9.6.6.0.
He bought it from the aliexpress and seller shipped it with sealed package. And it put "Global Versiso" sticker on the box.
Here I attach the ROM version image.
We better wait until official site put mi max 3 global rom there.

fordarm said:
I got an information from Korean xiaomi community that the official global rom version is 9.6.7.0 but not 9.6.6.0.
He bought it from the aliexpress and seller shipped it with sealed package. And it put "Global Versiso" sticker on the box.
Here I attach the ROM version image.
We better wait until official site put mi max 3 global rom there.
Click to expand...
Click to collapse
Thats a real global rom.
Its not uploaded to xiaomi's database yet so its unavailable for download
just like 9.6.8.0 which is also real but not released yet.

omer919 said:
Thats a real global rom.
Its not uploaded to xiaomi's database yet so its unavailable for download
just like 9.6.8.0 which is also real but not released yet.
Click to expand...
Click to collapse
I don't understand why Xiaomi doesn't support OTA on the mi max3 with former glabal rom. Really shame.

So let's say i managed to flash on my non anti-rolled back mi max 3 with your steps, in future updates can i just update normally OTA?